Previously, if we found one element with required attributes, we would
search into it and ignore any later elements also with those required
attributes. This meant that, if the first didn't contain the child
elements we were looking for, we'd fail to find what we sought, if it
was in a later matching element (e.g. with some ignored attributes).
We would then go on to look for a match in a later file, where there
might have been a match we should have found in the earlier file.
Check all matches, rather than only the first match in each file. Do
the search in each file "in parallel" to save reparsing the XPath.
This clears the search code of rather hard-to-follow break/else
handling in loops; and currently makes no change to the generated
data.
Change-Id: I86b010e65b9a1fc1b79e5fdd45a5aeff1ed5d5d5
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
In particular, this changed the US currency formats for negative
amounts to be parenthesised versions of the positive amount forms,
rather than having a minus sign after the $ sign. Test updated.
[ChangeLog][QtCore][QLocale] Currency formats are now based on CLDR's
accounting formats, where they were previously mostly based (more or
less by accident) on standard formats. In particular, this now means
negative currency formats are specified, where available, where they
(mostly) were not previously.
Task-number: QTBUG-79902
Change-Id: Ie0c07515ece8bd518a74a6956bf97ca85e9894eb
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
When doing XPATH searches, child nodes that have distinguished
attributes that were not asked for should be skipped. This is part of
the LDML spec and matters when resolving locale inheritance. Scan the
LDML DTD (previously only scanned for the CLDR version) to find which
attributes of which tags are ignorable - all others are distinguished
- and take the result into account when performing XPATH searches.
The XPath we were using for currency formats wasn't excluding
currencyFormatLength elements with type="short" and patterns specific
to thousands (and larger multiples); this is fixed by taking
distinguished attributes into account. However, the XPATH also wasn't
specifying the always distinguished attribute type="standard" that
was, in practice, used for nearly all locales that weren't (wrongly)
using short-forms for thousands; so type="standard" is now made
explicit, so as to minimize the diff.
This leaves only twenty-one locales with a negative currency formats.
A later commit shall switch to using accounting by default (it falls
back via an alias to standard, in any case), thereby restoring the two
mentioned below that were using it by accident, but the present change
gives the minimal diff here.
Thousands-specific formats replaced with sensible ones:
* zh_Hant_{HK,MO} (Traditional Mandarin, Hong Kong and Macau)
* eo_001 (Esperanto)
* fr_CA (Canadian French)
* ha_* (Hausa, when not written in Arabic)
* es_{GT,MX,US} (Spanish - Guatemala, Mexico, USA)
* sw_KE (Swahili, Kenya)
* yi_001 (Yiddish)
* mfe_MU (Morisyen, Mauritius)
* lag_TZ (Langi, Tanzania)
* mgh_MZ (Makhuwa Meetto, Mozambique)
* wae_CH (Walser, Switzerland)
* kkj_CM (Kako, Cameroon)
* lkt_US (Lakota, USA)
* pa_Arab_PK (Punjabi, in Arabic script, as used in Pakistan; uses
arabext number system, whose currency falls back to latn's, for
which pa_Arab over-rides the thousands-format).
Format changed from an over-ridden type="accounting" to standard (so
these lost a negative-specific form) in:
* en_SI (English, Slovenia)
* es_DO (Spanish, Dominican Republic; same)
For some locales we were picking up over-rides of narrow or short list
formats, or formats for or-lists or unit-lists rather than and-lists,
in place of the standard list format, that these locales don't
over-ride, provided by a parent locale. This changed list formats for:
* en_CA, en_IN (dropped "Oxford" comma before "and")
* qu_* (Quechua; dropped "utaq", presumably meaning "and")
* ur_IN (Urdu, India; was using unit-list formats)
[ChangeLog][QtCore][QLocale] Data used for currency formats in several
locales and list patterns in some locales have changed due to now
parsing the CLDR data more faithfully.
Fixes: QTBUG-81344
Change-Id: I6b95c6c37db92df167153767c1b103becfb0ac98
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
CLDR's currency formats do have number system variation, so take it
into account. (The old xpathlite code clearly intended to do this, but
failed at it due to looking for the wrong component of an XPATH to
fix.) This changes the currency formats in use for
* all Dutch locales (because nl.xml lists a currency format for arab
before the one for latn, and they differ),
* Punjabi, Urdu - specifically pa_Guru_IN, ur_Arab_PK (both like
Dutch, arabext before latn; which is correct for pa_Arab_PK and
ur_Arab_IN),
* Sindi (whose over-ride of latn currency format we were using, where
we should be using arab's format, supplied by root's default),
* Tatar (which specifies a generic currency format, which we were
using, before one specific to latn, which we now use),
* Tongan (same as Dutch),
* Konkani (like Dutch, deva before latn) and
* several North African Arabic locales (whose default number system is
latn, rather than arab, but previously used arab's formats).
Task-number: QTBUG-79902
Change-Id: I18d8ec16bfd3a516d1bcd2f63bc7f7f15179a3f4
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Move the code out to a CldrReader class in cldr.py, expand CldrAccess
with facilities that needs, expand ldml.py to include support for more
features, finally making xpathlite.py redundant. This initial commit
aims, though, to be bug-for-bug compatible with xpathlite in its
reading of the CLDR data.
It turns out we've been using draftier data than we were aware of
(which might not be a bad thing). The xpathlite code appeared to check
for draft attributes, but these only appear on leaf nodes and most
data were fetched by finding a parent and then scanning its children
without the draft check; only am/pm data was actually being excluded
based on draft values. (We allowed contributed, for am/pm, in
addition to approved, which is all the xpathlite code allows
otherwise.) There are also some less equivocal bugs; I'll deal with
these in later commits.
Simplified number-system data look-ups; the old get_number_in_system()
was taking care of old LDML versions' placement of the number system
attribute; this is no longer needed. (It was also being used for a
currency value to which it was not appropriate, which is now handled
separately; this is one of the bugs mentioned above.) Ditched a
fall-back to nativeZeroDigit, which no longer exists in CLDR.
Change the command-line to take the root of the CLDR data tree, rather
than its common/main/ sub-directory. Support naming the file to which
to write output, as a second command-line argument, instead of always
writing to stdout (which remains the default) and leaving whoever runs
the script to redirect stdout.
Support (internally for now, while adding TODOs to give main() more
command-line options) separating the stderr output into its more and
less interesting parts; for now, continue producing both, but suppress
the least interesting entirely.
Task-number: QTBUG-81344
Change-Id: Ie611b47403a9452b51feaeeaaa0fbc8f7e84dc71
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
This begins the process of replacing xpathlite.py, adding low-level
DOM-access classes to ldml.py and the CldrAccess class to cldr.py
Moved a format comment from cldr2qtimezone.py's doc-string to the
method of CldrAccess that does the actual reading.
Task-number: QTBUG-81344
Change-Id: I46ae3f402f8207ced6d30a1de5cedaeef47b2bcf
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
This saves repetition of temporary-file manipulation code. In the
process, ensure that we tidy away temporary files on failure.
Moved a comment in qlocale.h to *outside* the re-written portion, to
save having to rewrite it every time. Added blank lines to separate
script data from country data in the generated output. Changed 0s in
one comment to zeros, to match another comment.
Isolated use of sys to the __main__ block.
Isolated use of enumdata to the new LocaleHeaderWriter class.
Modernised all the string-formatting I touched.
Task-number: QTBUG-81344
Change-Id: I5768e45d9a8ea23facc303b3dd8af8b3ccbf7ff2
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Broke out the updating of a source file to a ZoneIdWriter helper
class, which enables tidying away the temporary file if we fail.
Collected up the rest of the script into a main() that's now
called from a __name__ == '__main__' block.
Rationalized the imports.
Eliminated an inefficient lookup function by constructing a suitable
dict() before entering the loop that needed it.
Separated the "data you might need to update" tables from the code
that does the work, to make it easier for those adding support for new
zones to see what they're doing.
Removed the spurious $Revision$ from the output and reworded the
premable of the generated file. (It would seem CLDR no longer uses an
RCS-based version-control system.) Generated output is otherwise
unchanged.
Task-number: QTBUG-81344
Change-Id: I7d9de8357ebcb599d154de9f862e25f7ade00390
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
For now unused; later commits shall put them to use.
Transcriber -- base, takes care of tempfile and renaming.
SourceFileEditor -- handles copying parts before and after a common delimiter.
Task-number: QTBUG-81344
Change-Id: I28cf977d0a08825fbb873fb330da6823b88ad3ed
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
The time-zone script was importing two functions from the locale data
generation script. Move them to a separate module, to which I'll
shortly add some more shared utilities. Cleaned up some imports in the
process.
Combined qlocalexml2cpp's and xpathlit's error classes into a new
Error class in the new module and made it a bit more like a proper
python error class.
Task-number: QTBUG-81344
Change-Id: Idbe0139ba9aaa2f823b8f7216dee1d2539c18b75
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
This new class mirrors the existing QLocaleXmlWriter and places the
two side-by-side in qlocalexml.py, rather than having the writing and
reading in separate places.
Made judicious use of transformed versions of mappings to save
repeated iteration of a mapping's entries to do lookups on fist
entries of pair-values; several (id, name, code) data-sets are
sometimes indexed by id, sometimes by name.
Reworked the default_map, that the complicated compareLocaleKeys()
used in sorting locale keys, to map IDs instead of names; the function
also needed the locale_map so that it could convert IDs to names,
which we can skip by going directly with IDs.
Task-number: QTBUG-81344
Change-Id: Iff6a97f7f0755b56dda70d8a6796ec074c558910
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Delegate the output of XML to a helper class provided by qlocalexml.py
and restructure the driver script so that it can be imported without
running anything. It now has a minimal __name__ == '__main__' block
that calls a main() function. This, for the moment, requires a global
via which it shares the CLDR directory with various other functions;
that shall go away in a later commit.
Task-number: QTBUG-81344
Change-Id: Ica2d3ec09f2d38ba42fd930258cc765283f29a71
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
The special handling of ":/etc/localtime" should only apply if that's
the exact value of $TZ; the old code would have treated
"/etc/localtime" the same, due to stripping a leading ':' before
checking for it. We can also test whether to do that stripping using
startsWith().
When reading the content of files, avoid QTextStream's trip via
QString and back to QByteArray by using the QFile's readLine()
directly, or by using readAll().
Task-number: QTBUG-75585
Change-Id: I1524529a2c34d83a9fbd00d41c11f2d994dfc49d
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Otherwise accessibility would only work when Orca is set to be started
in the session preference, and it would not work when running Orca or
compiz' zoom by hand.
The existing comment said that it was always true since gnome 3.6, but at
least in Debian 8's gnome 3.14, Debian 9's gnome 3.22, and Debian 10's
3.30 it is not always true, it is Orca which sets it on startup. Compiz's
focuspoll module also does so for people with low vision using zoom with
focus tracking.
[ChangeLog][Accessibility][Linux] Enable accessibility on Linux when Orca is
started by hand
Change-Id: I36cfe1b45e442c0fcefe813e09a67a74205c3ecf
Reviewed-by: Frederik Gladhorn <gladhorn@kde.org>
The former option to clang will result in more options to the linker,
such as the newly introduced -platform_version, which writes the
SDK version to the resulting binary. By using the syslibroot flag
directly we were missing the platform version, and binaries were
left without an SDK version set, resulting in failed validation
of the binary. Going with the clang driver gives us the right
behavior for free.
Fixes: QTBUG-83100
Change-Id: I98bc9ba644dae4bcc7a6a88481556bae185ce5fa
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 6a60192ac03d0b4ab542191065122243cebcd1ca)
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This leads to "make benchmark" actually running the benchmark, which
would be nice, I think. Purged various CONFIG += release or -= debug
lines from the same configurations; those surely only configure how
the test code is compiled, which is more or less pointless; it's the
code under test whose debug/release state matters, and I don't suppose
that's affected by the build config of the test code.
In the process, reduce diversity of the ordering of lines within these
*.pro files and purge some dangling space.
Change-Id: Ia9f9f0ca4c096262de928806bdfa6ea3b9e7b9ba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Additionally mark QMetaProperty::isEditable as deprecated.
Change-Id: I1abe4c6f2d30c2f96380f9e5942be431dbfed38f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
These message hooks are used to handle ALT+ENTER to enter/exit fullscreen
mode and PRINTSCREEN to take screenshots. Qt is implementing these
functionalities itself so we do not have to register these hooks.
If too many of these hooks are registered, callbacks are no longer called
and Qt's message queue is no longer handling messages. By saving these
hooks we can make sure that more Qt windows at the same time are possible
without getting unresponsive due to too many hooks being registered.
Change-Id: I5354f91f08cbfeda5e8dc3ad7f824fbd5b3b2932
Reviewed-by: Dominik Holland <dominik.holland@qt.io>
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
- QPainterPath needs an explicit include now
- QTabletEvent::device() is deprecated
Change-Id: I2d1086847ee2cf5ed63e345c7c2d6eb43897f0e4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Values that are validated as Intermediate are possible to enter, but
returnPressed and editingFinished signals are not emitted.
Fixes: QTBUG-82915
Change-Id: I3e194cd6ee93b3402090117b67044cf3663a232e
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Quit the event loop once the object is destroyed.
Change-Id: I6df1cfe867daacb6af56eb84646be91d98a2f545
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test can trigger timeouts in COIN, split into subtests.
Change-Id: I1fa5d52422275f89b2858d90c5979632aa7058e2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add the Qt 6 code paths and enclose in warnings exclusions.
Change-Id: I321296ef220fb788f04979ffff42a8a5f226dfdb
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
With nested popup widgets, pressing a mouse button on the lower
popup will close the active popup. MouseMove events that are generated
before the button is released again should not have that button
included, as it is likely to result in incorrect state handling in
the widget. This change removes all buttons from the MouseMove event,
which is the second best option.
This is mostly consistent with the behavior when closing a popup and
no other popup remains. The widget underneath will get MouseMove
events without the respective button included.
This change doesn't include a fix for the final release event, which
should ideally also not be delivered to the remaining popup, as it
never got a corresponding press event. Qt has already reset the states
in which it stores which widget received the press event at the time
the release is generated, such as qt_button_down and qt_popup_down.
So we can't separate a release grabbed by a newly opened popup (which
we want) from a release to the popup that became active after closing
(which we don't want).
However, widgets can more easily work around this issue, and the risk
of breaking things by changing the code further becomes too high.
Change-Id: I603bbdbc7e7355952d96ab77c5e2d2f1e6f94987
Fixes: QTBUG-82538
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Images are rounded up to 4 bytes per line minimum, so one pixel wide
images might not shrink when resizing.
Fixes: QTBUG-83179
Change-Id: If72c94409e4c899c5ad05b2867f5f53a94d0580f
Reviewed-by: Christian Kamm <mail@ckamm.de>
This amends b3e4be2d8b.
When building testlib with QtGui linked:(use "QT = core-private gui"
in src/testlib/testlib.pro)
Undefined symbols for architecture x86_64:
"QAbstractItemModelTester::verify(bool, char const*, char const*, char const*, int)", referenced from:
QTestPrivate::testDataGuiRoles(QAbstractItemModelTester*) in qabstractitemmodeltester.o
Change-Id: Ideb10ddd6717fed8d9f91f75bbfc9d5a22104730
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
All 6 getters and setters were deprecated by doc comment \obsolete in
3c159957f8 (Qt 5.9). Now we will generate
compiler warnings too.
Change-Id: I94c6da607fa5758072af1287c9286b6c52179cfb
Reviewed-by: Frederik Gladhorn <gladhorn@kde.org>
When doing a shift-select while moving the mouse then the start point
should be based on the start of the current selection and not the
pressed position. If there is no current selection start index, then
we can safely depend on pressed position as this will be the previous
index pressed on.
This resolves an issue introduced by
e02293a76d when fixing QTBUG-78797
Fixes: QTBUG-81542
Change-Id: Ia66c42b220452fdcbc8cfccc05dbc8a3911c3f5e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
[ChangeLog][Third-Party Code] libjpeg-turbo was updated to version 2.0.4
Change-Id: I7f74af0dc774a2172ff59713613a706e80d5b2cb
Reviewed-by: Liang Qi <liang.qi@qt.io>
QByteArray doesn't like it.
Apply the same protection to QString, which we know uses the same
backend but uses elements twice as big. That means it can contain
slightly more than half as many elements, but exact half will suffice
for our needs.
Change-Id: Iaa63461109844e978376fffd15f9d4c7a9137856
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When drawing multiple distinct (unconnected) lines (e.g. from
QPainter::drawLines() or a QPainterPath with alternating
movetos/linetos), the dash pattern should not continue from one to the
next, as it should when drawing a connected line (e.g. polyline).
Both the cosmetic stroker and the full stroker does it right, but the
fast rasterizing codepath got it wrong.
Fixes: QTBUG-83048
Change-Id: I3d090f7121726755a0e53cb66b99a5563ac0e1c0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
A read-only text edit with Qt::TextSelectableByKeyboard shows a steady
cursor to indicate to users that they can select the text, but not edit
it. When the control receives focus, it doesn't turn on blinking, but
explicitly sets cursorOn to true.
When focus is lost, then cursorOn needs to be reset to false to make
the cursor disappear, even if the blinking (as indicated by the poorly
named cursorVisible variable) is not on.
Change-Id: I78408b5c50c6ede3f9a7128be7a31b9c6795cf9c
Fixes: QTBUG-83029
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Paint events are delivered with the client rect of the widget, and
this applies to paint-on-screen widgets as well. The same goes for
how the widget repaint manager tracks dirty rects. Internally we
were also calling paintOnScreen() with client rects, so the use
of geometry() in the resize handler was likely a bug/oversight.
Change-Id: I1312ccf77218d1162e0971e4cbabaa80f49c852c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This has better support for threaded use, and gets rid of bind use.
This requires emscripten 1.38.37 and above
Task-number: QTBUG-76891
Change-Id: Ic30a6820c2ce945c314751c06cfc356914a71217
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Qt Creator now has the option to use the litehtml backend as a
replacement for the QTextBrowser-based help viewer.
Fix a few issues that the offline style has with the litehtml renderer:
- Fall back to using an unordered list for the navigation bar.
- Remove the background image for #buildversion and adjust font size.
- Adjust the generated padding around code snippets.
Keep the script that switches the offline-simple.css style to the
full offline style (offline.css) for JavaScript-enabled browsers.
The litehtml backend in Qt Creator will handle this switch internally.
With these changes, the generated offline documentation looks
acceptable when rendered with QTextBrowser, litehtml, or desktop
web browsers.
Fixes: QTBUG-82567
Change-Id: I86b179b1985b7ef54feddab30cb227b28021efe5
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
and instruct to use the ones from the Qt namespace instead.
Task-number: QTBUG-82532
Change-Id: I6a85f5096da8aec925a287beff136b77d113926e
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
and mark QHash::[const_|key_]iterator operators correctly as deprecated.
Change-Id: I01da16254759b9bdb7920709de45a72933d6b5c8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
