on Wayland
Task-number: QTBUG-100891
Pick-to: 6.3 6.2
Change-Id: Iadf12364ded4549988ad75a9487c7e96e963a956
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Scroll tests relied on having a small window. On Android, the
window can not be smaller than the screen.
This patch changes the tests so that the windows have large
enough content so scrolling can happen.
Fixes: QTBUG-87408
Pick-to: 6.2 6.3
Change-Id: I26a444518fd934527089297c594673937f0ecf88
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qabstractitemview requires a movable cursor.
This patch skips the test if there is no movable cursor.
Pick-to: 6.2 6.3
Fixes: QTBUG-87400
Change-Id: I4e917b2ad062ce068f23603410aa9209edb9828d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Issue introduced by commit 465701bb98.
[ChangeLog][QtCore][QMetaObjectBuilder] Fixed a bug that would cause
addProperty() to use the incorrect type for the property if the
property's name matched a valid type registered with QMetaType.
Pick-to: 6.2 6.3
Change-Id: Ic15405335d804bdea761fffd16d402f2c9611f30
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Inline the content to avoid a round-trip through qjsonarray.cpp and
qjsonobject.cpp.
This change revealed an inadviseable unit test check that dereferences
the end() iterator to get its type. I haven't changed it, but have
marked with ###. I also fixed a likely copy&paste mistake in that test.
Change-Id: I89446ea06b5742efb194fffd16bb774f3bfbe5f5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Commit 35adb74ddd ("Reimplement JSON
support on top of Cbor") accidentally forgot to multiply by 2 the index
stored in the QJsonObject::iterator. The same mistake was propagated
when QJsonObject::iterator was converted to QJsonValueRef. This had no
ill effects because the o->elements container would always contain more
elements, but it meant the check was ineffective and meant nothing.
So instead of doing nothing when the iterator does not point to this
container, simply assume it does. Bad things will happen if you try to
erase an iterator that points to another container, but that's true for
almost all container/iterator mechanisms.
Drive-by modernization of some of the surrounding lines.
Change-Id: I89446ea06b5742efb194fffd16bb7c322c2fc4f2
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The 0x10000 limit should not apply if the key is a valid index in the
array.
Change-Id: I5e52dc5b093c43a3b678fffd16b6a2a5a69acd61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
I screwed up when I wrote QCborValueRef by not having the ConstRef
type. The code worked, but it wasn't const-correct, allowing you to
write:
const QCborArray &arr = something();
*arr.begin() = QCborArray();
This mistake was brought over to QJsonValue in Qt 6.0, so it has to be
fixed for QJsonValue too. The actual fixes are in the next couple of
commits.
This change is believed to be binary-compatible: the Q{Json,Cbor}ValueRef
classes continue to have the exact same size, except that they're now
empty and have a new base class. They weren't trivial before this commit
doesn't change that.
[ChangeLog][Potentially Source-Incompatible Changes] The iterator
classes for Qt's JSON and CBOR containers (array and map/object) had a
const correctness issue which allowed a const_iterator to mutate the
container being iterated on, even if that container was itself const. Qt
6.4 has a fix for this, but will cause compilation issues where
QCborValueRef and QJsonValueRef were used where the correctness could be
violated. To keep code compiling with both 6.3 and 6.4, either change to
non-const iteration or replace the QxxxValueRef with a const QxxxValue
reference. This change is binary-compatible.
Change-Id: I5e52dc5b093c43a3b678fffd16b6063333765ae0
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The flag IsContainer was not set, causing the QCborContainerPrivate to
become confused.
This commit also expands and subsumes the existing test for QCborValue
(non-Ref).
Change-Id: I5e52dc5b093c43a3b678fffd16b6a17c6f4a0676
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This has found several missing const qualifications, a missing
QCborMap::Iterator method, and a missing one in QCborValue too.
The methods "### TEMPORARY" in this commit are actually removed in two
commits.
Change-Id: I5e52dc5b093c43a3b678fffd16b6939f62954dc4
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
- New testcase tst_eventdispatcher added under commit d292f0143f.
It shows that only glib implementation works correctly.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I7b861a6207fcb319de362645fc8f00a8ab6cd4b9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Single-line bodies of single-line controls don't need braces.
If one block of an if/else chain needs braces, the rest get them too.
One long condition needed a split that forced its body to need braces.
Change-Id: Ic4116b1273e16a586fdec18e6d8228e48a9cb07c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This saves repetition of the call in the midst of query strings.
This incidentally makes it possible to give informative names.
In the process, build those query strings using QLatin1String::arg(),
instead of implicitly converting ASCII strings to QString in order to
then do arithmetic with them, at least when the arithmetic involves
more than one addition. In one instance, where two branches did the
same thing with different format strings, limit the branching to
selecting which string to use, then do the common thing once.
Change-Id: I60fd7457a727bcc3872d3052d8fd638ebaf36ac2
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Use initializer lists rather than << entries.
Use arrays where we don't need the lists at all.
Make them const when they can be.
Replace foreach with ranged-for.
Use auto rather than naming iterator types and save end() at the start
of the iteration to save re-requesting it each time round the loop.
Reverse arguments to a QCOMPARE() as actual should come first and
expected after, not the other way round. Change some casts from
C-style to type-as-function-style, use QString literals rather than
C-string literals that would need conversion at compile time and
QLatin1String::arg in preference to arithmetic where the same format
is duplicated.
In the process, reworked one test to put its two iterations, one over
good query strings, one over bad ones, into separate blocks using
separate const arrays, instead of reusing a list with an uninformative
name.
Change-Id: I4a272be3eb58e9dca136238277b92379d6ca076d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The loop used an int counter that was initialized from a size_t,
provoking a warning from MSVC. Since the indexing is irrelevant in any
case, use a ranged-for loop. Since the loop was formerly in decreasing
index order, reverse the table being iterated so that entries remain
in their prior order.
Change-Id: I79b93c5a3f39a502b0cae83215b8e3665d0e17f5
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QtGui][QDesktopServices] URL handlers that have been passed
to setUrlHandler() must now be removed by calling unsetUrlHandler()
before they are destroyed. Relying on the handler's destructor to
implicitly unset it is now deprecated, because it may already be in use
by concurrent openUrl() calls. Support for implicit unsetting will be
removed in 6.6 and, until then, a qWarning() is raised if it is
exercised.
Fixes: QTBUG-100775
Fixes: QTBUG-100779
Pick-to: 6.3 6.2 5.15
Change-Id: I0c4f91b78f847b135fdeb38766babc892bdc1379
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
tst_qcoreapplication.cpp is used both in tst_qcoreapplication and
tst_qguiapplication. To distinguish these two compilations,
the define QT_GUI_LIB was used. This led to an error on Android,
where Qt::Gui is always linked, because the Qt Android Platform
Plugin needs it.
This patch introduces the preprocessor define QT_QGUIAPPLICATIONTEST
which is to be used only in the compilation of tst_qguiapplication.
This is then used instead of QT_GUI_LIB.
Change-Id: Ifa5bfacb197d68365288c1da85573106515fc6c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If adding a QLineEdit to a QGraphicsScene as a QGraphicsProxyWidget, the popup
completion of that QLineEdit is drawn in the wrong location. When the completer
getting the rect of screen, it gets the rect of the QGraphicsScene where
QLineEdit is located rather than the rect of the screen, resulting in an error
in the following calculation.
Note that as long as the completer popup is a toplevel widget not parented
to the target widget, it will not be automatically embedded into the graphics
view via QGraphicsProxyWidget. So with multiple views for a scene, or in views
that use transformations, the geometry will still be off.
Pick-to: 6.3
Task-number: QTBUG-20531
Change-Id: If5d8a707ca35a9e4709117b077978145c6143e46
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
tst_QFutureWatcher was deactivated for Android. This patch activates it.
Fixes: QTBUG-88136
Change-Id: Iead82e22d73eb15c9ecd2756eb33925910bbffc0
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
- current INTEGRITY development pack don't support denormals for float and double.
All values are rounded to 0.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: Iaaacdc4210c7ac2ec3ec337c61164a1ade0efb01
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... which implements or assumes something about the
broken^Wnon-STL-compliant insertion behavior.
Once this has integrated into all module dependencies, we can
re-implement these APIs using STL-compatible semantics.
Task-number: QTBUG-100092
Change-Id: I54f4f5ce7addd9543866d2c399f48aff50983b88
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Even QtCore alone cannot be built without the properties feature since
Qt 5.5. While fixing this is easy, other modules like dbus,
networking are also using QObject::property() and friends liberally.
All in all I doubt that anybody will miss the feature (otherwise it
would have been fixed in the last decade).
Change-Id: Iaf3cc20bda54ee2ff3b809fac8fa82b94ecc88c0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The macOS standard library doesn't have std::contiguous_iterator yet, and
it doesn't seem like libc++ has it either.
Checking __cpp_lib_concepts for the C++20 official version appears to work.
Pick-to: 6.3 6.2
Change-Id: I8c31cd64de24c03b3a3f37cb393bb2f9b55a834d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Remove Integrity and Android specific code that explicitly adds
test data to the resource files. qt_internal_add_test functions
implicitly adds test data to resources for Android and Integrity
platforms by default.
Change-Id: Ia1d58755b47442e1953462e38606f70fec262368
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Multiple tests use qt_internal_add_resource that copies the
functionality that is already implemented inside the
qt_internal_add_test function. Simplify these test by replacing
the qt_internal_add_resource call with the new BUILTIN_TESTDATA
option.
Change-Id: I18475b817d6f87264f0de53817d6c26c5ccab4e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Size a QMdiSubWindow is no real toplevel widget, QLayout::activate() did
not properly set the minimum size based on it's children. Fix this by
treating a QMdiSubWindow as a toplevel widget during the calculation.
Fixes: QTBUG-100494
Change-Id: Ia2e6c519c7214c36383facd244711bd932231d40
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If one calls setPlainText("") before setting a placeholder text,
the placeholder visibility is not updated, and the placeholder is not
visible. Fix it by updating placeholderVisible properly.
Fixes: QTBUG-96212
Pick-to: 5.15 6.2 6.3
Change-Id: I1bd3f0cb4c59973a847bcf3787e35d7c17b6d673
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In one case, cast an int to qsizetype rather than the other way round,
in order to compare them.
Change-Id: Id8dffe61f9565040f1a5ee24867956397f814a55
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Some of the else if lines exceeded 100 characters, so should have been
split; and some lines already were split. So each whole chain should
have had braces on its bodies. Instead make it a switch, as this makes
it more evident what's going on in any case. Furthermore, as each
branch did the same thing with dbType-specific strings, change to just
setting QLatin1String variables, so that the rest of the code needn't
be duplicated in each branch; it can simply be done once after the
switch, using the string's .arg() to embed fragments. In the process
break up the SQL query strings more gracefully, purge spaces just
inside C++ parentheses.
Change-Id: Ie26166e098ad74720bb6d7c4d9fe47718c33a13c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Telling us the condition tested should have been true is what
QVERIFY() does anyway, so don't go to the whole trouble of saying the
same thing - and wrapping it in in a QString() merely in order to then
qPrintable() it back out again, pointlessly converting a C-string to
unicode and back again.
At the same time, skip one other qPrintable(QString("...")) without
.arg() formatting; and change the check it's the message for to use
QL1S::arg() instead of QString::arg().
Change-Id: Ie71a79da8017916d301a38b69fc422e55a5a3649
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Expected warnings are clutter for anyone reding the output, so
suppress them when they're correct behavior.
Change-Id: Idf47ba4fab8069237067d9b20afef3041e0c2f8c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Doing the tidy-up after the last check has the problem that it gets
skipped if any check fails, as the premature return skips the tidy-up.
In the process, added the missing tidy-up to prematureExec().
Repackage the code for one tidy-up as a named lambda so that the
duplicate can share it with the scope guard. Made some existing scope
guards const, while I was about it, so that the one that isn't -
because it gets dismiss()ed - stand out.
Change-Id: I96d6834d5d7675f15018169a7093b0211db6f8a9
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Raster pipeline is not supported on webOS OSE: trying to use it causes
an exit(1).
Fixes: QTBUG-100654
Pick-to: 6.3
Change-Id: I00325fc1330a2d0d4abfdee054343ecfac767309
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
[ChangeLog][Potentially Source-Incompatible Changes] The qtextstream
header no longer includes <QString>, <QStringEncoder> and
<QStringDecoder>. Code which relied on the implicit inclusion of those
classes might now need to include the headers explicitly.
Task-number: QTBUG-97601
Change-Id: Ifb8c8452026195a772c0588dbbbc53fb51cac548
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It only stores one layer of state, and pausing twice in a row will just
overwrite the previous state. This doesn't happen often but can happen,
especially on Windows if a certificate needs to be looked up in the system
certificate stores (socket gets paused) and then a recoverable error
occurs in QNAM (socket gets paused again).
Fixes: QTBUG-100362
Fixes: QTBUG-63196
Fixes: QTBUG-98476
Pick-to: 6.3 6.2 5.15
Change-Id: Ie524c48e11b6fa8010b78cc1bf3931efe2ce3351
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
No need for a virtual do-nothing destructor in a class that isn't
inherited from. Defining an empty init merely makes QTest go to the
trouble of calling it, which it could just as well skip.
Change-Id: Ifd44c473c05fdeaaa7923d2ccdd0a13c8921b6bd
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The offset fields for tst_QTimeZone::specificTransition() had a
comment claiming they are in minutes; they are in fact in seconds, so
fix that. At the same time, Moscow hasn't had a time-zone change since
2017, so the end-date for one of the test intervals can be nudged a
little closer to the present without harm.
Change-Id: I66822cb758f7e00d6added801466a6745be3e31a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Unless "." (or the empty string) is in $PATH, we're not supposed to find
executables in the current directory. This is how the Unix shells behave
and we match their behavior. It's also the behavior Qt had prior to 5.9
(commit 28666d167a). On Windows, searching
the current directory is the norm, so we keep that behavior.
This commit does not add an explicit check for an empty return from
QStandardPaths::findExecutable(). Instead, we allow that empty string to
go all the way to execve(2), which will fail with ENOENT. We could catch
it early, before fork(2), but why add code for the error case?
See https://kde.org/info/security/advisory-20220131-1.txt
[ChangeLog][Important Behavior Changes] When passed a simple program
name with no slashes, QProcess on Unix systems will now only search the
current directory if "." is one of the entries in the PATH environment
variable. This bug fix restores the behavior QProcess had before Qt 5.9.
If launching an executable in the directory set by setWorkingDirectory()
or inherited from the parent is intended, pass a program name starting
with "./". For more information and best practices about finding an
executable, see QProcess' documentation.
Pick-to: 5.15 6.2 6.3
Change-Id: I54f205f6b7314351b078fffd16cf7013c97ee9fb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
