Since Xcode 8 (beta 2) that tool is no longer available
through xcrun. We resort to xcodebuild instead.
Change-Id: If9d7b535c1cbac2caae0112b2003283aeff34fb9
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This was missed in ab599a3931 when
QMAKE_STRIP was set as a side effect of adding support for separate
debug info.
Task-number: QTBUG-54212
Change-Id: I86dd040dbefec4c58879c7d029ed89dd8bad3daf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
exclusive_builds_post.prf (via default_post.prf) processes
debug_and_release into BUILDS, so .prfs which can rely on being
executed later (because they are loaded via CONFIG) can rely on BUILDS
and related variables.
Change-Id: I5677079ad5145bf493af17b4b60347208572fd21
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the whole point of the check is ensuring that the message is printed
only once for each sub-project, so !build_pass alone is fully adequate.
Change-Id: Ib8f821ead6709efc9bfa935e1d05f8caba02a814
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This patch adds a warning that will be shown when link_pkgconfig is used
in a project but Qt's configuration has it disabled. This can happen
when Qt is built before pkg-config has been installed or if it's not
detected.
This will avoid user losing time trying to make pkg-config work while Qt
just ignores it.
Change-Id: Ieeff8dd6784b9430cfebef355855ec1be91bc96e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
As OpenBSD ships its own X11, linker errors occur when not explicitly
adding the X11R6/lib dir to rpath dirs.
Change-Id: I75991e9d7de115d2d212a017d9c8f9aa93cecc27
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
On OpenBSD, the system compiler shipped is still gcc 4.2.1 but for proper
C++11 support in Qt, QtCreator and Qt-based projects we need to use
the compilers provided in ports/packages which have the binaries renamed
to eg++/egcc. Therefore, redefine the variables from g++-base.conf to
use the newer compilers.
Change-Id: Ic8ea1c5d2c2c0263dad5ae85c8c747bcd3985b7d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
NetBSD is heavily dependent on using rpath, so we need to add the
lib dir QMAKE_LIBDIR and QMAKE_LIBDIR_X11 to QMAKE_RPATHDIR
explicitly to avoid linker errors. See http://www.netbsd.org/docs/elf.html
for more info.
Change-Id: I225143d5e2d9a125060b14e3a8a7953927d63b33
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
10586 reflects Update 1, which is the mininum supported version for many
months, hence reflext this in the manifest template as well.
There are additional features (like drag and drop) which require and
even later SDK version. However, they do not reflect the minimum.
Change-Id: I6d71dc499c928ed98c8a25283e0b53994317bb00
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This follows up ab599a3931, which did not
take installation into account.
Task-number: QTBUG-54036
Change-Id: Ic1b3acb8984255dd1ca1c288b7b150814ce9e606
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
... for a loooong time.
it was replaced by plugin_with_soname (which is unused so far).
Change-Id: Ifc377d155d6eac41e85f3a0914ed817d55b5648b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the tests would inherit MAKEFLAGS, with somewhat predicatble results.
Change-Id: Ia17638f6229d0ae86f5558726850040703d90044
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
libGLES2 (the only user of these libraries) is built dynamically even in
a static qt built when dynamicgl is configured. in this case the static
libraries need not be installed.
amends 2311997.
Change-Id: Ic9bc3937d6ee0d97e0ca7fc96596fa90ebfe8710
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add x86-64 and aarch64le QNX platforms. These platforms will be
available in QNX 7.0.
Change-Id: Iba1f635ba45fddf1a1caf907415a23a510ba0818
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If macx is present, osx AND macos should be required.
Change-Id: I5cd9d41270c741dc314720a1119b163dd17fdfd7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
As common bsd's are using the -ffunction-sections flags from
mkspecs/common/gcc-base.conf, also use the --gc-sections ld flags
like Linux as all are using GNU ld as their linker and all are
capable of using it. The last remaining problems with --gc-sections
removing the .name sections providing the OS tags for distinction of
the execution layer were solved with NetBSD 6.0 and OpenBSD 5.4, see
http://gnats.netbsd.org/40401 and http://www.openbsd.org/plus54.html
so this option can safely be used now to reduce the size of moc and rcc
tools.
Change-Id: I74ccd4f6bc607f6d82d32fc864875f26b26bf167
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Adapt to the OS X => macOS rename in Q_OS_ macros/docs, qmake scopes,
file selectors, etc.
- Add new QSysInfo values and MAC_OS_X / __MAC_ / __IPHONE_ values for
macOS 10.12 and iOS 9.1 through 10.0.
- Update prettyProductName with new macOS "Sierra" codename.
Change-Id: Id976530beeafa01b648ebaa16f4a8f0613fcaf75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add the strip commands for installation commonly used also on BSD
systems.
Change-Id: I4113ffa559a737ef92afb7c90ab5e1bff902b1bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
So that it actually compiles with gcc-linaro-arm-linux-gnueabihf-raspbian.
Remove also flags a device spec should not set (like -std and -O).
Change-Id: Ib7a3bc298e60715410d5c00fbc22199ab4711fa7
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The rpi3 spec added previously is only half of the story now that we
have the option to use another GL driver.
Change-Id: I1b1edde77bcc6d2f382f1021de9c594c27c34d6f
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
BSD OS mkspecs share mainly the same configurations except very few
differences. Merge into a common/bsd/bsd.conf file to be used across all BSD
OSes in their respective qmake.conf and add a qplatformdefs.h that contain
the common defines to be re-used in the BSD mkspecs.
The change includes the usage of <sys/param.h> also on NetBSD through the
common qplatformdefs.h, which is intended for using NetBSD's version defines.
Change-Id: Ibb0ac9e4c8bb5aff7d0febdcab1a4b9600a61117
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the assumption stated in b67a0836d is actually invalid - configure sets
build_all without debug_and_release there. debug_and_release does
actually imply build_all, though.
to make things less confusing, don't let configure inject
iphonesimulator_and_iphoneos into all projects, but handle it like
debug_and_release instead.
Change-Id: Ib7acdc63308a538862fc603428f81aba60bca08e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
OpenBSD made the switch from a.out to ELF with release 3.4, published
2003, see http://www.openbsd.org/34.html. In preparation to cleaning
up the mkspecs for OpenBSD, remove the a.out defines as only recent
versions of OpenBSD (5.8 onward) will be supported.
NetBSD switched from a.out to ELF file format with release 1.5, see
https://www.netbsd.org/releases/formal-1.5/NetBSD-1.5.html in the year
2000.
Remove the defines for older a.out systems now as we are at release 7.0
and only 6.0 onwards releases are currently supported anyway.
While cleaning up, remove the old comments for QT_SOCKLEN_T values of
outdated OpenBSD and NetBSD releases as well.
Change-Id: I8519eab7bcd4af19c0e9f628657878f32b2bd602
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The qplatformdefs.h for OpenBSD included an undefine of
_POSIX_THREAD_SAFE_FUNCTIONS because of (at the time) missing
implementations of the required _r() functions. After checking these
functions http://www.unix.org/whitepapers/reentrant.html
against the OpenBSD man pages http://man.openbsd.org/OpenBSD-4.4/cat3/getpwuid_r.0
they are all complete with OpenBSD 4.4 released in 2008. As
OpenBSD only supports the current and the last release before (5.8 and
5.9 now), it is safe to assume that this undefine can go away now
for sure.
Change-Id: I341bcae77d1bd7249ac3fdeaefce9c5eb595eca7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The freebsd-g++46 mkspec was intended to specifically use gcc 4.6 from
FreeBSD ports collection. However, the ports collection moves its
"standard" gcc version and uses symlinks to the standard commands
(e.g. gcc -> gcc48) on installing gcc. The current gcc in ports is
4.8.5, so the mkspec is not useful at all.
Change-Id: I041325d05c7dc3f47f4a774d6f46ba24a601bf3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On FreeBSD, the gcc manpages until Release 5.1 mentioned using
the -D_THREAD_SAFE define when using -pthread. This has been obsoleted
and the gcc manpages from Release 5.2 onwards have this removed.
Now we finally remove this historic relic here, too.
Change-Id: I00a5b688c56f46b938c0806fb44b72d5afe5079e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By using commmon/gcc-base-unix.conf and common/g++-unix.conf most of
the contents of the qmake.conf for OpenBSD can go. The QMAKE_LFLAGS_UNDEF
are reset because the linker can't handle environ in libraries, which is
only added to libc in OpenBSD 6 (http://www.openbsd.org/faq/current.html)
even when explicitly adding -lc to QMAKE_LIBS.
See
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151102/309783.html
for similar questions on using -Wl,-z,defs instead.
Change-Id: I6c725fb3bc7ae63270912b07f230a480c9157dfd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By using common/gcc-base-unix.conf and common/g++-unix.conf most of the
mkspec details can go, leaving us with a minimized qmake.conf.
Change the default X11 location to point to /usr/X11R7 after NetBSD
switched to X.org in Release 5.0 by default.
Also change the default location for addon software on NetBSD, it uses
pkgsrc as its ports system which installs to /usr/pkg by default (the
default value for $LOCALBASE of pkgsrc on NetBSD), see
https://www.netbsd.org/docs/pkgsrc/using.html chapter 4.1.
These default values mirror the current state of NetBSD usage to get
the prerequisites to compile Qt with a minimum amount of configure
parameters.
Tested with NetBSD 7.0 using gcc 4.8.4-nb2 (system compiler)
Change-Id: Ic50757af9f070c0383c7356302e7e7686f031740
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
LIBGCC_PATH was used before we initialized it, somehow it magically worked ...
Change-Id: I0a9a748ffbfc641f60736b0cf85d23f499b64e66
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Add -lexecinfo for backtrace(3) on NetBSD and OpenBSD. Without,
qlogging.cpp linking will result in undefined references to backtrace
and backtrace_symbols. The behavior required is identical to FreeBSD so
no additional fixes are required (see src/corelib/global/global.pri:41)
Change-Id: I3cfd1d75f1fb5b8505c08a880f91e7b39a5a650d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
FreeBSD 9.3 is still supported and uses gcc as the default
compiler, therefore FreeBSD ports require patching the mkspecs
back. To avoid patching, move the mkspecs back to the right
place and adapt the path in the qmake.conf/qplatformdefs.h
[ChangeLog][FreeBSD] The freebsd-g++ mkspec was moved back and no
longer requires the "unsupported/" prefix, matching the FreeBSD
ports tree, as FreeBSD 9.3 still defaults to using GCC. Users of
GCC that did not previously use the ports patch will need to adapt their
build scripts and drop the "unsupported/" prefix.
Change-Id: Ideda4a33cccf5381000f6f50b6ae92a5c24ba9d4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Having the debug info in separate files is very helpful, especially on
memory constrained 32bit systems. When the debug info is compiled into
the object files, processes can run out of memory when trying to load
them.
Change-Id: I1808a32e855d6a62e17e1b734c511b31db5f03f1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The freebsd-icc mkspec was intended to be used with the Intel
compiler, which nowadays is still only available in version
8.1.038 (https://www.freshports.org/lang/icc/) and for i386 only
while the current version is around 17. On FreeBSD the port
was actually never supported by Intel anyway.
Change-Id: I03b1939be63eef4363bd6b074a6b739365f495ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
LIBS_PRIVATE is more correct (these shouldn't be part of the public API),
and additionally, using LIBS_PRIVATE also ensures these libraries come last
on the link command, which fixes builds using -Wl,--as-needed.
Change-Id: I9f2e4e78855a30a53ce9013623597b840a2832bd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
While previous SDKs used the form "CE_SDK (CE_ARCH)" in their
configuration/platform names, this is not true fo the Toradex SDK.
Inside Visual Studio the platform is only called "Toradex_CE800"
instead of "Toradex_CE800 (ARMV7)".
In order not to break other SDKs CE_PLATFORMNAME is introduced and
used in the wince80colibri-armv7-msvc2012 mkspec. If the variable
is set qmake uses it as the platform name in its vcproj generator.
Change-Id: Icb501bf6446a9f617745a0d2c7a80b240680b043
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
so far, each module had to do it in its .qmake.conf. by now, all modules
have been adjusted to the expected structure, so we can enable it
centrally.
Change-Id: I16b4e7581e51bfc54e71d2f7f852858ae0b47281
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Other popular specs have this as well.
Change-Id: I44245f37857d476b9ee53ecad021261b94214b2f
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Reviewed-by: Louai Al-Khanji <louai.al-khanji@qt.io>
don't pretend that these two flags can be set separately - the
configures set them in tandem.
Change-Id: Ib0beae0152de09026d4627fd3ae0feabd9ce1b81
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When compiling on Windows to for example Android, we may be using the unix
generator, but the make command may be mingw32-make.
Task-number: QTBUG-53038
Change-Id: If8d1e1bea733cf1b4ed837c423a34ecfb3cafd1f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We don't know why it works, but we've been told that it fixes
some builds and we have no reason to think it will break others.
Task-number: QTBUG-52998
Change-Id: Iacaa1fb3c49e4d7aafd4167e591ff3724489872e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
our zlib header includes qglobal.h, so we need the qtcore include dirs,
and qtcore is also where the actual code is compiled into.
Change-Id: I09f530a1b4e6160438215a6d7223c0771ce94f05
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
this makes it fully consistent with INSTALLS.
note that this also removes the file name from the target path when
copying files, also for consistency.
Change-Id: I69042c9aa1e2cc81f8ff982343ba25688a04abfd
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
