If any non-breakable content (such as a link) already went past
80 columns, or if a word ended on column 80, it didn't wrap the rest of
the paragraph following.
Change-Id: I27dc0474f18892c34ee2514ea6d5070dae29424f
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
When reading a document like
# heading
- list item
and then re-writing it, it turned into
# heading
- # list item
because QTextCursor::insertList() simply calls QTextCursor::insertBlock(), thus
inheriting block format from the previous block, without an opportunity to
explicitly define the block format. So be more consistent: use
QTextMarkdownImporter::insertBlock() for blocks inside list items too. Now it
fully defines blockFormat first, then inserts the block, and then adds it to
the current list only when the "paragraph" is actually the list item's text
(but not when it's a continuation paragraph). Also, be prepared for applying
and removing block markers to arbitrary blocks, just in case (they might be
useful for block quotes, for example).
Change-Id: I391820af9b65e75abce12abab45d2477c49c86ac
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Certain fonts with multiple styles have the same family name. When
loading these as application fonts we were not specific enough when
querying for the text metrics. This meant that e.g. the bold version in
a font family would get the metrics of the regular one.
Fixes: QTBUG-67273
Change-Id: Ic988d62cddde0a1f77ddcaf2891cadc21c9b31e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When calling setDocument (directly or through the constructor) a delayed
rehighlight is initiated. Previously, if any text was changed before
this rehighlight could run it would cancel the rehighlight, even if the
changed text only caused a new block of text to be highlighted.
Fixes: QTBUG-71307
Change-Id: Ib09b664d90906f5b4427105f0e45469806f3a779
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Since the comma character was originally used as a separator, we
need to extend QFont to have setFamilies() so that we can avoid
joining the family strings together. This enables us to see the
family name as a single string and for multiple family names,
we have families().
Subsequently, this has added functions to QTextCharFormat to
account for multiple font families too. So it is now possible to
set a single one directly with setFontFamily() and multiple ones
with setFontFamilies().
This also bumps up the datastream version to 19 as QFont now
streams the families list as well.
[ChangeLog][QtGui][QFont] Add setFamilies()/families() to aid using of font families with commas and quotes in their name.
[ChangeLog][Important Behavior Changes] QDataStream version bumped up to 19 to account for changes in the serialization of QFont.
Fixes: QTBUG-46322
Change-Id: Iee9f715e47544a7a705c7f36401aba216a7d42b0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The hue parameter in hsl/hsv was treated the same way as a the other
parameters although it's range is from 0-359 and not from 0-255.
Fix it by extending the maximum range for the first parameter when
parsing a color value given in hsv or hsl.
[ChangeLog][QtGui][CSS] Fix the range of the hue parameter when parsing
a color given in hsl or hsv
Fixes: QTBUG-70897
Change-Id: I9ffa65a89c0abcca62bae35777ca1cbde3375180
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The Qt stylesheets color property did not support hsl or hsla although
CSS 2.1 does support it. Since QColor natively supports this color model
only the color parsing needed to be adjusted.
This also adds some stricter checks for a valid css color definition and
prints a warning about the issue.
[ChangeLog][QtGui][CSS] Added support for hsl/hsla colors
Fixes: QTBUG-58804
Change-Id: Ief65a36a7e0ed0d705dc1fe5a8658e8d07fe9a13
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When there were additional spaces between the function definition and
the first parameter, the parser failed to parse it when it contained
another function (e.g. 'qlineargradient(... rgb() ...)').
The reason for this was that ::until() needs the function at index-1 so
it can correctly count the opening parenthesis.
Fixes: QTBUG-61795
Change-Id: I992f556e7f8cd45550f83bc90aa8de2b4e905574
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The flakiness was reported for macOS 10.8 a long time ago and I
am not able to reproduce it, so lets remove the workaround for
it.
Task-number: QTBUG-32690
Change-Id: I92e64065c7480b8f4c5d1d1e6cb5fdd218a70313
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When a QTextCursor survives its QTextDocument, the internal
QTextDocumentPrivate pointer is set to null. There are checks for
this in all the QTextCursor functions to skip out early if such
a QTextCursor is used.
However, when executing the "if (d->priv)" condition in setters,
this will access the non-const operator->() of QSharedDataPointer
and detach the QTextCursorPrivate, and in the copy constructor of
this class, there was an unprotected call into priv->addCursor().
In theory, we could cast all the checks for d->priv to avoid
detaching, but in practice this doesn't matter, since the setters
will typically detach anyway later on.
[ChangeLog][QtGui][Text] Fixed a crash that can happen when calling
a setter on a QTextCursor after its QTextDocument has been deleted.
Task-number: QTBUG-70293
Change-Id: I8f6dc5bb344d1d824f673c0c220b68b7fee237a8
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When showing line and paragraph separators at an offset from the start
of the string, the end of string pointer would be incorrectly set, and
we would read past the end of the string. If any part of this memory
happened to match the line or paragraph separator, then we would
overwrite it and have a crash.
I couldn't find any reliable way to test this, since the crash depends on
the contents of the memory after the string allocated by the algorithm.
But with an overflow of 100 000 characters, I found that it crashed every
time I ran the test.
[ChangeLog][QtGui][Text] Fixed potential crash when using
QTextOption::ShowLineAndParagraphSeparators.
Task-number: QTBUG-69661
Change-Id: I17d1996b883560bacdc7ce114c8aeb2b0108faea
Reviewed-by: JiDe Zhang <zccrs@live.com>
Reviewed-by: Michal Lazo <xlazom00@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
winrt still has some issues with some character sets. These
tests are skipped/blacklisted for now and will be investigated.
Task-number: QTBUG-68297
Change-Id: I898e3383a4673b6dc87815a75e705f3302a4cbba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This autotest fails on Ubuntu 18.04 and QEMU builds.
Task-number: QTBUG-68860
Change-Id: I1907e713e8c743cf5cf8e284df516600a0c03dba
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Adjust line positions to deal with negative leading which isn't included
in height of QTextLine.
Change-Id: Id7918968c0f9d7e65700b9e7a08fc5d761883f22
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The bounding rect was not including positive leading of the last line. This
patch solves it by changing using QTextLine's setLeadingIncluded, and adds
handling of negative leading to keep rendering unchanged in that case.
Change-Id: I4d18b81892184bb85cd7949a5dc3fb9cfa270a26
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When showing a condensed font with AnyStretch, we should
not apply any stretch to the font (and if a stretch is
requested, we should calculate the actual stretch based
on how much the font is already stretched or condensed).
This usually works as expected, however, when using
QFont::NoFontMerging as the style strategy, we would
scale the glyph advances by the stretch of the font
since the calculated stretch of the font engine would
be overwritten by the actual stretch. In the case where
we use font merging, this would be done for the multi
engine, so we would not get the same issue, since the
text engine gets the stretch from the actual font engine
and this still has the original, calculated stretch
set.
Note on the test: We can't use testString() for this,
since it contains a space, and the test font does not
have a glyph for this, so we will end up merging a
different font for the space, giving us a slightly
different advance.
[ChangeLog][QtGui][macOS] Fixed display of condensed fonts
when NoFontMerging is in use.
Task-number: QTBUG-63800
Change-Id: I5b05e0dbfc8ae4b5d10c621ecb0975f53fda9483
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QTextDocumentWriter only supports a small subset of table formatting
when exporting to ODF-format. This patch adds more formatting
capabilities to the ODF exporter:
- table border support
- table alignment
- table width
- respect column constraints (column widths)
- add a tab before soft line breaks. This will avoid causing the last
line to stretch all over the cell in justified paragraphs.
With this patch, line height settings are now exported, too.
[ChangeLog][QtGui][QDocumentWriter] QDocumentWriter now supports table
borders, table alignment, table width, column widths, line height and
image resolution when exporting QTextDocuments to ODF files.
Task-number: QTBUG-63581
Change-Id: I2d269ef0f842e73af64d48bfef531d5fa3078088
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Remove BLACKLIST files which are no longer valid because the mentioned
CI systems are no longer active:
- opensuse-13.1
- opensuse-42.1
- rhel-7.1
- rhel-7.2
- rhel-7.3
- ubuntu-14.04
or the testcases are no longer available:
- QTBUG_14292_filesystem in qactiongroup
Change-Id: I80a4397059fafba169096440fdc07d45c76a1ed8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
QFontEngine::cloneWithSize() is used by QRawFont internally when switching
a raw-font from one size to another using setPixelSize. For CoreText, we
use a subclass of QCoreTextFontEngine to keep track of the QByteArray data
of a raw-font, but failed to overload cloneWithSize, so we would lose the
data whenever setPixelSize was called, resulting in missing text rendering
in QtWebKit. We now retain the data as we should.
Task-number: QTBUG-65923
Change-Id: I7d4186a3c32a61d48d1e9388e43f2792e8e46081
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The size of the QStaticText was always adjusted, even if setTextWidth()
was used. Now size of the QStaticText is calculated according to
the set width of the text, and if no width was set, then the
automatically adjusted size is used.
[ChangeLog][QtGui][QStaticText] Fixed explicitly set width not being
respected.
Task-number: QTBUG-65836
Change-Id: If2f9f6952fb168f4bcb6d8fabfdc7360f8a36485
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
After we stopped sanitizing the fallback font list (with change
6ca48a847a), we now need to make
sure it is ordered so that the fonts that support the writing
system in question are always tested first, otherwise we can end up
loading a lot of fonts that will never be used.
Task-number: QTBUG-65605
Change-Id: Id2a65bbff3e64e6d6e6b4f72500778ee3e811e84
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
When we request fallback fonts, we cannot discriminate the fonts
based on the writing system support. This is especially important
since common script is now merged with other scripts, meaning that
a common script character will always go through the fallback
mechanism when not supported by the main font. When drawing
for instance a string of Devanagari characters on macOS, we would
get a list of 33 fallback fonts, but almost all of them would be
the default Devanagari font, since none of the other fallbacks
would support that script. Meaning that we would just check the
same font over and over, which makes no sense. The fallback list
has been retrieved specifically for the given script, so we do
not need to consider that when fetching the fonts.
For most of the common set, we will not have noticed the bug,
because at least one of the writing system-specific fallbacks will
have had support for latin characters as well. But when trying to
mix emojis and some non-common script, we would get a box in
place of the emoji, which had been adopted to the main script and
would only be looked for in the fonts supporting this.
Note that this exposed an issue with the QRawFont test on some
systems. When the sample text contained a space, it would
be possible to get a fallback font for this character, since
we now effectively support fallbacks. This is not the correct
behavior, but it is unrelated to this fix, and it was not what
the QRawFont::unsupportedWritingSystem() test was written to
check. I have therefore removed the space from the sample text
to make the test pass, and will make a separate task of fixing
the issue of merging fonts for whitespace characters.
[ChangeLog][QtGui][Text] Fixed a bug where mixing different
writing systems with emojis could lead to missing glyphs.
Task-number: QTBUG-61882
Change-Id: I00f6043bb01af1f2277723ccf643034aebf3e18f
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
The QTextFormat::FontLetterSpacingType property was added outside
the span of the FirstFontProperty and LastFontProperty, so
the fontDirty flag would not be set when it was changed. There is
no binary compatible way to fix this before Qt 6, so for now, we
add a special case for it.
[ChangeLog][QtGui][Text] Fixed an issue where changing the letter
spacing type of a QTextCharFormat would not cause its font to
update.
Task-number: QTBUG-65345
Change-Id: I5ab53d7f82d529b57edceacfc3fa688c6741cd17
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: C. Boemann <cbo@boemann.dk>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A source of constant confusion is the QFontMetrics::width() function,
which does not return the bounding width of the text, but the advance
width. We deprecate this and add horizontalAdvance() instead, to avoid the
confusion in the future.
Note that there was an internal width() overload which was only there
for the purpose of supporting the Qt::TextBypassShaping flag. This
flag has already been replaced by public API, so no such
overload is added. Instead, we deprecate the TextBypassShaping flag
as well, which makes sense, since a replacement has been made.
Also note that there was a consistency problem with QFontMetrics and
QFontMetricsF, which are supposed to be interchangeable. The
QFontMetrics::width() functions for strings took an optional int length
argument, while the floating point version did not. This error is
corrected in the advance() functions.
[ChangeLog][QtGui][Text] Added QFontMetrics::horizontalAdvance() and
QFontMetricsF::horizontalAdvance() to replace the confusingly named
width() function. The latter has now been deprecated.
Change-Id: I0dfda43aa65c8235be32c62fade82cae05b29c79
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Can now detect nested quotes and code blocks inside quotes, and can
rewrite the markdown too.
QTextHtmlParser sets hard-coded left and right margins, so we need to do
the same to be able to read HTML and write markdown, or vice-versa,
and to ensure that all views (QTextEdit, QTextBrowser, QML Text etc.)
will render it with margins. But now we add a semantic memory too:
BlockQuoteLevel is similar to HeadingLevel, which was added in
310daae539 to preserve H1..H6 heading
levels, because detecting it via font size didn't make sense in
QTextMarkdownWriter. Likewise detecting quote level by its margins
didn't make sense; markdown supports nesting quotes; and indenting
nested quotes via 40 pixels may be a bit too much, so we should consider
it subject to change (and perhaps be able to change it via CSS later on).
Since we're adding BlockQuoteLevel and depending on it in QTextMarkdownWriter,
it's necessary to set it in QTextHtmlParser to enable HTML->markdown
conversion. (But so far, nested blockquotes in HTML are not supported.)
Quotes (and nested quotes) can contain indented code blocks, but it seems
the reverse is not true (according to https://spec.commonmark.org/0.29/#example-201 )
Quotes can contain fenced code blocks.
Quotes can contain lists. Nested lists can be interrupted with
nested code blocks and nested quotes.
So far the writer assumes all code blocks are the indented type.
It will be necessary to add another attribute to remember whether the
code block is indented or fenced (assuming that's necessary).
Fenced code blocks would work better for writing inside block quotes
and list items because the fence is less ambiguous than the indent.
Postponing cursor->insertBlock() as long as possible helps with nesting.
cursor->insertBlock() needs to be done "just in time" before inserting
text that will go in the block. The block and char formats aren't
necessarily known until that time. When a nested block (such as a
nested quote) ends, the context reverts to the previous block format,
which then needs to be re-determined and set before we insert text
into the outer block; but if no text will be inserted, no new block
is necessary. But we can't use QTextBlockFormat itself as storage,
because for some reason bullets become very "sticky" and it becomes
impossible to have plain continuation paragraphs inside list items:
they all get bullets. Somehow QTextBlockFormat remembers, if we copy it.
But we can create a new one each time and it's OK.
Change-Id: Icd0529eb90d2b6a3cb57f0104bf78a7be81ede52
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
- QObjects are always passed by pointer not by reference, by convention
- writeTable() takes QAIM rather than QATM to make testing via
QStandardItemModel possible in the future
Change-Id: I5bc6b8cd9709da4fb5d57d98fa22e0cb34360944
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Importer fixes:
- the first list item after a heading doesn't keep the heading font
- the first text fragment after a bullet is the bullet text, not a
separate paragraph
- detect continuation lines and append to the list item text
- detect continuation paragraphs and indent them properly
- indent nested list items properly
- add a test for QTextMarkdownImporter
Writer fixes:
- after bullet items, continuation lines and paragraphs are indented
- indentation of continuations isn't affected by checkboxes
- add extra newlines between list items in "loose" lists
- avoid writing triple newlines
- enhance the test for QTextMarkdownWriter
Change-Id: Ib1dda514832f6dc0cdad177aa9a423a7038ac8c6
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
A QTextDocument can now be written out in Markdown format.
- Add the QTextMarkdownWriter as a private class for now
- Add QTextDocument::toMarkdown()
- QTextDocumentWriter uses QTextMarkdownWriter if setFormat("markdown")
is called or if the file suffix is .md or .mkd
- Add QTextEdit::toMarkdown() and the markdown property
[ChangeLog][QtGui][Text] Markdown (CommonMark or GitHub dialect) is now
a supported format for reading into and writing from QTextDocument.
Change-Id: I663a77017fac7ae1b3f9a400f5cd357bb40750af
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
In Korean text, they typically can use both the "Western" style of
word wrapping, i.e. breaking on spaces, as well as the East-Asian
style of potentially breaking between all syllables. However,
the Unicode Line Breaking Algorithm, TR14 defaults to breaks on
syllables and specifies a possible tailoring where Hangul is
mapped to the AL class instead:
"When Korean uses SPACE for line breaking, the classes in rule
LB26, as well as characters of class ID, are often tailored to AL"
When using Qt, the user would expect the WordWrap wrap mode to
break between words in Korean. If you want the syllable-based
text layout, you would use WrapAnywhere, probably accompanied
by line justification.
To avoid breaking QTextBoundaryFinder and other potential clients
of QUnicodeTools which depend on getting the precise Unicode
data from the algorithm, we do this by passing a flag from
QTextEngine when initializing the attributes. This way, it
can also be made optional later on, if we decide there is
a reason to add an additional wrap mode specifically to
handle cases like this.
[ChangeLog][Important Behavioral Change] WrapWord now
correctly prefers line breaks between words in Korean text.
WrapAnywhere can still be used to get breaks between syllables
instead.
Done-with: Alexey Turitsyn <alexey.turitsyn@lge.com>
Task-number: QTBUG-47644
Change-Id: I37b45cea2995db7fc2b61e3a0cc681bbdc334678
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
The blacklisting is not needed anymore as we now use -qt-harfbuzz.
This reverts commit b36e5faad4.
Task-number: QTQAINFRA-1363
Change-Id: I3ae50588204b27e6880416ae2cbc28dda53bb292
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
In Qt, we have QTextOption::tabStop, QTextEdit::tabStopWidth and
QPlainTextEdit::tabStopWidth.
Neither are very good names, since the tab stop is neither a
numerical value as in the former, nor does it have any dimensions
that can be measured, as in the latter. Vertical text advances
may also be supported by Qt at some point in the future, at
which point the name would make even less sense.
At the same time, we expose the actual type of the tab stop
distance as floating point in the QTextEdit and QPlainTextEdit
API instead of always rounding it to an int.
To avoid duplicating either of these APIs in Qt Quick, we
introduce tabStopDistance as the common term instead and deprecate
the old names.
[ChangeLog][Text] Introduced tabStopDistance property in
QTextOption, QTextEdit and QPlainTextEdit as replacement for
the inconsistently named tabStop and tabStopWidth properties.
QTextOption::tabStop, QTextEdit::tabStopWidth and
QPlainTextEdit::tabStopWidth have subsequently been deprecated.
Change-Id: Ib7e01387910cddb58adaaaadcd56c0e69edc4bc2
Reviewed-by: Paolo Angelelli <paolo.angelelli@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test fails when the system harfbuzz (version 1.3.2) is installed.
Change-Id: Id18a5a3c503f64ef56567d71655e433a46908b3f
Task-number: QTQAINFRA-1363
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The test fails when the system harfbuzz (version 1.3.2) is installed.
Change-Id: Id18a5a3c503f64ef56567d71655e433a46908b3f
Task-number: QTQAINFRA-1363
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
In the past, we had an undocumented text flag that worked with
one of the QPainter::drawText() overloads. This was never intended
as public API and served a specific cause in Qt WebKit at one point.
But there is a general need for such API, as disabling shaping features
easily gives 25% performance improvement on text rendering even for
fairly short strings.
This patch adds a new style strategy flag to disable shaping and
will just uses the CMAP and HDMX tables to get glyph indices and advances
for the characters. In Qt 6, the TextBypassShaping flag can be removed
completely and be replaced by the style strategy.
[ChangeLog][QtGui][Text] Added QFont::PreferNoShaping style strategy to support
improvements to performance at the expense of some cosmetic font features.
Task-number: QTBUG-56728
Change-Id: I48e025dcc06afe02824bf5b5011702a7e0036f6d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Similar on how it is done for Windows desktop we also use the given
style hint when building the list of fallbacks a font family.
Change-Id: I71378581d07f20ebe5bf0bc757bba919cc70e118
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
CSS style such as "line-height: 1.5;" should be used as a multiplier,
but Qt uses it as percentage which makes line spacing way too small. To
workaround this, convert it to percent and use as
QTextBlockFormat::ProportionalHeight instead.
[ChangeLog][QtGui][Important Behvior Changes] Changed CSS line-height
property with multiplier to follow CSS spec
Task-number: QTBUG-56848
Task-number: QTCREATORBUG-17683
Change-Id: Icc98f7c0d4d07542a220702c287f23fa450ef875
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
<div>1<br/></div>2 was inserting two newlines between 1 and 2, while all
tested web browsers only insert one newline - as long as there is nothing
between the <br/> and the </div>.
This was the cause for extra newlines being inserted in KMail when
replying to HTML emails, such as those generated by gmail.
Change-Id: I5145d977701e68913264357bba22780e7cdd3f7d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If the respective modules aren't available we cannot build the tests
and examples. We drop the qtConfig(opengl) requirement for the opengl
examples as
a, we would need to make the QtGui configuration available for that to
work, and
b, we should not add too much detail to the tests and examples build
configurations. Checking each test and example for every feature it
uses would be too much.
Task-number: QTBUG-57255
Change-Id: Ifb043c81ec9e5c487765297bd65704812cd281fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
operator=, which was only used for clearing, wasn't clearing the hash.
This led to a mismatch between the vector and the hash (given that the hash
points into the vector).
Spotted by interrupting kmail in gdb, and it was in this code
iterating over a 2000 entries hash (the first vector entries not matching
the hash, this code keep appending new entries for the same formats).
This fixes QTBUG-8862 again, the initial fix having been accidentally
reverted in 467b15a.
Change-Id: Ia34b3d002a0199e1930431a4bbdb2ec981ed4ffc
Task-number: QTBUG-8862
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When calculating the width of a text for drawing decorations on top,
we use the effective advance of the whole text after it has been
through the shaper.
However, in the case of QStaticText and QGlyphRun, there is shortcut:
Since we only have the glyph indexes and position of each glyph,
we use the position + advance of the right-most glyph to find the
right-most edge of the decoration. For this, however, we use the
advance of the glyph *out of context* of the rest of the string,
because the whole idea is to avoid doing the shaping of the string
with every draw call. In some rare cases, the advance of the
right-most character, in the context of the string, is different
from the advance of the standalone glyph.
Now, one way of fixing this would be to store the width of the
text in QStaticText and QGlyphRun, but since it is a very rare
artifact which is barely visible, I have opted to just work around
it in the test instead, the workaround being to force integer
metrics so that we don't get the small 0.2 pixel error.
Task-number: QTBUG-55217
Change-Id: I8d16d52f2ef27275cabb7d3865aeeaa31617ba3d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Recent HB changed the way of handling ZWJ/ZWNJ to be more in par
with other engines.
Change-Id: I8abacd195e4b247c8fa6d91ef1086e74da0a1efb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The QFontMetricsF version of the test should not truncate the
returned values, as the results may then be wrong.
Change-Id: I17f97f846bb723709e695e8866e437d6888d275b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
OpenSUSE has a bitmap font called "Waree" while the test
is created for the TrueType font which is available on Ubuntu.
The style names are different, so we can use that to check
that we have the right one.
Change-Id: I808d0d1ecde9f10ed7730dc76ab3818490002ba9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Amends 7896ae052a. The previous change
focused only on ZWJ and ZWNJ, but there are many other formatting characters
that we need to support and that may be rejected by the German keyboard-hack.
This opens up for all characters in the Other_Format category.
Task-number: QTBUG-58364
Change-Id: Idd967a9ae5b12060c851f6030b7e019508561696
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The style name needs to be cleared if not present in the string,
otherwise the style name from qApp->font() (which propagates to
any default-constructed QFont) remains.
Change-Id: I9b6522a39a38526cced8a11ed02ae32582026480
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
The test failed if qApp->font() had a styleName() set,
when testing old serialization formats which didn't serialize it.
Change-Id: If0236d354be144b3a990e074a22f796fffb1ed18
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Private Use Area characters are quite valid input characters when used
in combination with a custom font. Joiners also serve an important language
purpose in semitic writing systems.
Note that there is a hack where we disregard any character produced
using CTRL or CTRL+SHIFT specifically because of German keyboards. I have chosen to
keep the hack in this patch to limit the change (though I have made an exception
for ZWJ and ZWNJ since both are produced using Ctrl+Shift on Windows), but it
will probably have to be reverted.
[ChangeLog][QtWidgets][Input] Accept characters in Private Use Area, as well as
zero-width joiners and zero-width non-joiners in input in QLineEdit and QTextEdit.
Task-number: QTBUG-42074
Task-number: QTBUG-57003
Change-Id: I73f3b7d587a8670de24e902dc52a51f7721dba5a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Commit 2bc7a40048 taught the CoreText font database to populate the
families lazily, and in the process added a guard to ensure that we
didn't populate internal fonts (prefixed with a '.'), as these fonts
would then show up in font selection dialogs.
Commit 909d3f5c7 then added support for private fonts, by making it
possible to filter out any private fonts from font selection daialogs.
But the guard was not removed, so we were still not populating these
fonts. This guard has been removed, and the filtering function has
been updated to include the conditions of the guard.
Next, commit e5e93345c5 used [UIFont fontNamesForFamilyName:] to verify
that each family that we registered with the font database would also
have matching fonts when finally populated. This is not the right approach,
as [UIFont fontNamesForFamilyName:] does not handle internal fonts.
Instead we trust what CTFontDescriptorCreateMatchingFontDescriptors()
gives us, but make sure to register the resulting font descriptors
with the original/originating font family, instead of the one we pull
out of the font descriptor.
Finally, as of iOS 10, we can use CTFontManagerCopyAvailableFontFamilyNames
instead of [UIFont familyNames], which gives us all of the internal font
families like on macOS, instead of just the user-visible families. For
earlier iOS versions we manually add '.PhoneFallback', as we know it
will be available even if not listed in [UIFont familyNames].
The end result is that we register and populate families like '.PhoneFallback',
which is critical to supporting more esoteric writing systems.
The check in tst_QFont that styles for a given family is not empty has
been removed, as we can't guarantee that on all platforms, which is
also documented for QFontDatabase::styles().
Task-number: QTBUG-45746
Task-number: QTBUG-50624
Change-Id: I04674dcb2bb36b4cdf5646d540c35727ff3daaad
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
../tst_qfile.cpp: In member function 'void tst_QFile::handle()':
../tst_qfile.cpp:2661:38: warning: ignoring return value of 'ssize_t read(int, void*, size_t)', declared with attribute warn_unused_result [-Wunused-result]
tst_qstatictext.cpp:862:58: warning: unused parameter 'textItem' [-Wunused-parameter]
../tst_qtcpsocket.cpp: In member function 'void tst_QTcpSocket::abortiveClose()':
../tst_qtcpsocket.cpp:2254:90: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Test.cpp: In member function 'void My4Socket::read()':
Test.cpp:66:20: warning: 'reply' may be used uninitialized in this function [-Wmaybe-uninitialized]
../tst_qlocalsocket.cpp: In lambda function:
../tst_qlocalsocket.cpp:701:51: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
../tst_qtcpserver.cpp: In member function 'void tst_QTcpServer::linkLocal()':
../tst_qtcpserver.cpp:935:92: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
../tst_qtcpserver.cpp:940:92: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Change-Id: Ic315069768bcb63a6b333c28ac65b0b992b0d43f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Looks up the canonical names of enumerated fonts and register them under
their preferred names if present.
Also changes the logic handling registration of english aliases, so it
is always done, even if it might in rare cases cause a double
registration since that is safe.
Task-number: QTBUG-53458
Change-Id: Ia010774b26072192b55697b717cc37442c852881
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
No-break-spaces should not be counted in the space data, but rather
be treated as any other non-breakable character. We were already
taking care of this in the loop we reach if the item starts with
a character which isn't whitespace, but there is a second loop for
items that begin with whitespace characters.
The result of this was that in certain circumstances where you gave
the nbsp its own format and made the line wrap, the previous line
would count an extra trailing space and it would swallow the first
character in its following line.
[ChangeLog][QtGui][Text] Fixed a bug where a no-break space would
sometimes cause the first character of the containing line to not be
displayed.
Task-number: QTBUG-56714
Change-Id: Idd760a389052e6de70f6cc397122b217987fa5f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We were throwing away important information by claiming that all
fonts support all the standard sizes in QFontDatabase on Windows
This caused the font dialog to list unsupported sizes for bitmap
fonts, unlike the native font dialog.
We would also claim to support creating bitmap fonts at
unsupported sizes, which would lead to
1. QFontInfo(font).pointSize() would return the requested size,
not the actual rendered size.
2. Bitmap fonts created at 64 pixels and higher would be invisible.
On Mac, there are no system bitmap fonts, and the use is not very
common, but installing some bitmap fonts on the system, it does
seem to ignore the sizes supported in the font and just displays
the standard list instead, so we keep the current behavior there.
[ChangeLog][QtGui][Text] Fixed list of supported sizes for
bitmap fonts on Windows.
Task-number: QTBUG-56672
Change-Id: Idbec2db9eb3381ab5ddf6259bd2befcba9b93564
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The QTextDocument::toPlainText() converts some characters in the
text to ASCII, which can be problematic for use cases where you
want to save the precise contents of the document, e.g. in
Qt Creator. Since we don't want to change the behavior of
toPlainText(), we introduce a new function which returns the
raw text contents of the document instead, with no modifications.
[ChangeLog][QtGui][Text] Added QTextDocument::toRawText() function.
Task-number: QTBUG-56538
Change-Id: Ib6c48a16551c4c71c4c431760f993793d1af6806
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Fixes the test for width of condensed fonts so it doesn't depend
on the presence of the Liberation font on the system, and adds
another test that condensed sub-families can be matched
consistently. The latter will however not work on Windows until
QTBUG-53458 is solved.
Task-number: QTBUG-51335.
Change-Id: Id6d046274fa21b2dce0ad6b32dce7f1c8a92a4f4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The layout isn't actually created until endLayout() or setLineWidth() is
called. So in the case where this was not done, the height of the line
would be 0, thus multiple lines would be placed on top of each other, at
y == 0.
[ChangeLog][QtGui][Text] Fixed QStaticText when manually breaking lines
and no text width was set.
Task-number: QTBUG-56346
Change-Id: I7f6ed6260545882f05fe39b21134315eca7401b9
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
After e109b8a0f3, it is possible
that the cache will be flushed as a result of inserting a new
font rather than just when the timer event triggers. When doing
superscript and subscript text layouts, we would first get
a regular font engine, then a scaled one, and then reference
the regular font engine *after* getting the scaled one. If the
regular font engine was deleted as a result of inserting the scaled
one, we would get a dangling pointer and crash.
The situation was improved by 49926bb9ef.
You would now to switch between 256 different fonts in the layout
in order to trigger it. The test in the commit will trigger the
crash even with this change.
[ChangeLog][Qt Gui][Text] Fixed a crash that could happen if you
were doing many different text layouts with different fonts
and superscript or subscript alignment.
Task-number: QTBUG-53911
Change-Id: Ia33108252e030eff25924ef1b7c10b9d59b5bc8c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
[ChangeLog][QtGui][QTextDocument] Fixed a bug that would return a wrong
position when searching backward from the end of the document.
Task-number: QTBUG-48182
Change-Id: I6e88f808a50cb840f61e7bc579e2a28c5300089d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Cap height is an important metric of font, in particular it is
required to make decent implementation of "initial-letter"
CSS property in QtWebKit.
Note that some fonts lack cap height metadata, so we need to
fall back to measuring H letter height.
Change-Id: Icf69d92159d070889085e20d31f2e397d796d940
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
If an entire font family is condensed or stretched and we match by
family name, the default stretch factor of 100 will make the font
engine try to synthesize it back to medium stretched font.
The existing code is already made to deal with a stretch of 0 that is
no longer used. This patch reintroduces 0 stretch to indicate no
specific stretch has been requested. Specifically setting stretch to
100 on a QFont will introduce the old behavior.
[ChangeLog][QtGui][QFont] The default value of QFont::stretch() is
now 0 to indicate any default stretch is acceptable.
Task-number: QTBUG-48043
Change-Id: I574747f980fd4f9893df828818aae99a07b41623
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Don't try to locate the text by coordinates at the edge of the text but
simply aim at the center vertically _and_ horizontally.
Task-number: QTBUG-52991
Change-Id: Ia9e84fc5d12491840e739c4eea730fe13058f3c7
Reviewed-by: Simo Fält <simo.falt@theqtcompany.com>
don't refer to non-existent feature 'OdfWriter', and test these
classes if we have a developer build.
Change-Id: I59b0d4bbba4958ed3bd76f504cd8b493dbd7f877
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Font style names are quite irregular and the simplistic matching
implemented in QFontDatabase::styleString(const QFont &) is unable to
properly resolve the style name when font is recreated from a string.
This causes the fonts before and after serialization to be considered
different, even though they are not. The from/toString methods were
made to write and respect the exact font style.
[ChangeLog][QtGui][Important Behavior Changes] QFont::toString() and
QFont::key() were modified to save the font's style name if one is
set, invalidating any stored font identifiers. QFont::fromString()
was also adjusted to accommodate the change.
Task-number: QTBUG-54936
Change-Id: Ibc7c54119acdd8f0950d6049cc89f859bf981504
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Adds parsing and handling of the indirect sibling selector, this should
mean we can at least parse all CSS3 selectors even if we do not yet
support all of them.
Also adds tests for previously added CSS3 selectors.
Change-Id: I1ce9afb9466044a38bdec167affc21a87837e4a4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Adds the three CSS3 attribute selectors.
During this the internal naming of the existing attribute-selectors have
been changed to be more clear, and the dash-matching has been fixed to
not just be beginsWith.
A non-breaking space have also been removed from the CSS.
Change-Id: Ia4db4a5a19e3ceee8c3c8a4b744149edd1d32bdc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
tst_QAbstractTextDocumentLayout::imageAt() is flaky and is blacklisted
Task-number: QTBUG-53648
Change-Id: Ia9b0c8934a82d7518ff9d9e1538d995ab73feedb
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
When ShowLineAndParagraphSeparators was set, we would replace the
separator character in the user's string in some cases, since we never
detached from the input string and just const_cast the pointer to the
shared buffer.
[ChangeLog][QtGui][Text] Fixed bug where a QTextLayout with
ShowLineAndParagraphSeparators would modify the layout's input
string.
Task-number: QTBUG-42033
Change-Id: I92f9100b750f16e52b38b718245c13e5c4a0ebb9
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
To get QtWayland in the CI, we need to blacklist formatAt on OpenSUSE
42.1
Task-number: QTBUG-52991
Change-Id: I8f411ccd6ab1e1d385e98cd8cae81a5570d68a8f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
We need to blacklist the test since we need to get QtWayland in CI
Task-number:QTBUG-53648
Change-Id: Id98c18aa8f39766b5dbb859b085f1912c42339fe
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
All this code was skipped on all platforms, so keeping it is just
confusing.
Change-Id: I405d2e791b22a2494fe5ccac6e3bf08905dc4e5a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This is a partial revert of 992f233c in Qt 4 repo. The rest of the
change cannot be reverted, since it added public API, but that
API might be useful anyway.
The patch was wrong, basically. QFont::exactMatch() should not claim
that you can get an exact match for a typeface alias. It also introduced
some weird inconsistencies: For instance, if the first font the alias
resolved to in FontConfig did not exist, then exactMatch() would return
false, even if it then resolved to the next one which existed. This
caused a test failure on OpenSuse, where the preferred font for "sans"
is Arial, which doesn't exist, so Roboto will be used instead.
[ChangeLog][QtGui][Important Behavior Changes] QFont::exactMatch() now
returns false when the provided typeface is an alias.
Task-number: QTBUG-46054
Change-Id: I7532d2879b492544620aa0d1d87dd493a4923af9
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
As of 5.7, HB-NG is the default shaper engine.
Change-Id: Ia5400444a5e387fa6b56de47fabc6f1c2c166f85
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Override preceding Common-s with a subsequent non-Inherited,
non-Common script.
This produces longer script runs, which automagically improves
the shaping quality (as we don't lose the context anymore),
the shaping performance (as we're typically shape a fewer runs),
and the fallback font selection (when the font supports more
than just a single language/script).
Task-number: QTBUG-29930
Change-Id: I1c55af30bd397871d7f1f6e062605517f5a7e5a1
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The QTextBlockFormat::FixedHeight overrides the line height
regardless of its calculated height. If the line contains
objects or text which is higher than the specified line height,
using FixedHeight will cause them to overlap with the previous
line. This is not what happens in normal web browsers. The
expected behavior is that the line height given in CSS is the
minimum height, but that we still reserve space needed to display
everything without overlaps.
To make it possible for people to retain the old behavior, we
introduce the -qt-line-height-type property, which allows them
to override the default.
This also fixes output from toHtml() to use the new property
rather than set the minimum height of the paragraph or the
"line-spacing" property, which does not exist in either CSS nor
in Qt.
[ChangeLog][QtGui][Important Behavior Changes] When line height
is specified in pixels, this is now interpreted as the minimum
line height rather than an absolute line height to avoid overlaps.
To get the old behavior, use the -qt-line-height-type property in
CSS and set it to "fixed".
Task-number: QTBUG-51962
Change-Id: Ic2dde649b69209672170dad4c2de1e1c432a1078
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Remove #ifdef sections for Q_OS_WINCE and wince .pro file clauses in library,
and tests.
Task-number: QTBUG-51673
Change-Id: I55f61845c3b54027c467a5c59c122e7d16955358
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The new imageAt() method pairs with the existing anchorAt() method, and
allows retrieving the source link of the image under the cursor.
We also expose the common logic between these two methods as an
additional formatAt() method.
[ChangeLog][QtGui][QAbstractTextDocumentLayout] Added imageAt() and
formatAt() methods, which respectively can be used to retrieve the
source link of the image under the cursor, or the QTextFormat of the
text under the cursor.
Change-Id: If09815dde91de6616edcb19c72c462dbf7abd8ef
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
It is already blacklisted in openSUSE 13.1 and is a
known bug somewhere.
Task-number: QTBUG-46054
Change-Id: Ie2fb23bcede1871d3b9fa15644112fb2ab975c2b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
openSUSE 42.1 returns 2 font families comma separated
when querying monospace font families. Without splitting
we compared the family against the whole list.
Task-number: QTBUG-51336
Change-Id: Icd757e173aa8ffab713b83cf9e38b78aab00c07e
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
Only two tests inside tst_qstatictext required private symbols, so
we can enable the rest on all builds.
Change-Id: Id222ba01d9676c40b6447c1526ee127fcc2090d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Factor out function to check on the pixel color that
outputs a verbose message on failure.
Change-Id: I2331fe45f35327d1ff8ae547a58d93a2e6fe9184
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
If a user selected the text "foo" and typed "bar", upon pressing undo,
the text would change to "b". This is incorrect and does not match the
functionality of QLineEdit or the default behaviours of Windows/OSX/Ubuntu.
This was fixed by a change made to always merge two sequential inserts
if they are not part of the same block. Previously the selection delete
and the "b" were part of one edit block and "ar" was part of another.
With this change, the selection delete and "bar" are part of the same
edit block.
Unit test changes are part of a separate review (Part #1) since they
required changes in qtdeclarative.
[ChangeLog][QtGui][Important Behavior Changes] Fixed QTextEdit to match
undo functionality of QLineEdit to group two sequential inserts into one
undo action.
Task-number: QTBUG-38825
Change-Id: I76bf30e331e3526277c3e0ade58cf95b611fc117
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
OpenSUSE 42.1 failed this case for some reason. With this change
the test tests the anchor from the middle of the string instead
of looking for it from the end.
Task-number: QTBUG-51345
Change-Id: I2fc7496399f46926f261c7a1f48756bfaf782f7b
Reviewed-by: Pekka Vuorela <pvuorela@iki.fi>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
Labels would use a statically defined font for <pre> blocks.
Use the one defined by the QPlatformTheme instead, through
QFontDatabase::systemFont(FixedFont)
Task-number: QTBUG-50564
Change-Id: I5491bd0defce651bdf809bcbc6a529a900f4959b
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
When getting the glyph runs from a QTextLayout with multiple
lines, the glyph runs would be merged if possible, but not their
bounding rects. This was an oversight.
[ChangeLog][Text][QTextLayout] QTextLayout::glyphRuns() now returns
united bounding rects for glyph runs that are merged.
Change-Id: Ibbeaa99ecfc4e82e7965342efdae7c3c2b637343
Task-number: QTBUG-50715
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Parse the requested family before we're looking/saving into the cache,
thus hitting the cached EngineData for:
* quoted family names (eg. QFont("'Arial'"))
* non-simplified family names (eg. QFont(" Arial "))
* substituted family names (\sa QFont::insertSubstitution())
* explicit fallback list, where possible (eg. QFont("Tahoma, Arial"))
This also improves the cache hitting for the font engines in some cases.
Change-Id: I18cdc3e8d669cccec961f84e9b27329402e2b7ed
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We depend on the assumption QFontCache::findEngine(key) for key.multi=1
returns a font engine of type QFontEngine::Multi;
guarantee that by checking it in a single place.
Change-Id: I287da4fd62deb22fc5520cde5b0505bc44547609
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Both constructors were taking a pointer, so they participated in
overload resolution along with QTextDocument and QTextFrame pointers.
Instead, make them take references and move them to the private section
of QTextCursor. That necessitated adding a method to QTextCursorPrivate
to access that private constructor from non-friend classes.
Change-Id: I7e6338336dd6468ead24ffff1410e3bc534d77dd
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The test inserts strings "0" ... "9" into the text document,
takes the half of resulting document's size, makes half of
lines invisible and compares sizes. On OS X 10.11 after inserting
"4" the width changes, so making "4" invisible also reduces the width
and QCOMPARE(currentSize, previosHalfSize) fails. Instead of digits,
insert the same string "A" 10 times.
Change-Id: Ie88a0442703f98949cea9bcdb694cecee59695f3
Task-number: QTBUG-49848
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
On Windows, the wrong value was used to calculate the
design-to-device scale. The assumption has been that tmHeight
in the TEXTMETRIC is the pixel size of the em square, but
it is not, it's the height of the font (ascent + descent).
The pixel size of the font is defined to be the em square size
in pixels.
On OS X, the kerning data was never actually read from the
font. I've added a lazy initialization for this similar to
the one in the FT engine.
This was discovered when investigating QTBUG-48546, as it turned
out that the kerning information extracted by Qt in this case was
different from the one used by Harfbuzz.
I've changed testfont.ttf to kern "_2" so that the digit is positioned
directly on top of the underscore and constructed a test.
[ChangeLog][QRawFont] Fixed kerning on advances in QRawFont for
OS X and Windows.
Change-Id: Ic9a321ad119ea880cef89b861c75a820ab8d3182
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: I31adb60bdaf7ea243143a9244b6c4f66f38b189d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Prefer QCOMPARE over QVERIFY for equality and use QLatin1String().
Change-Id: If226a0fc7b25be3e6774c7e36ca1e6f99234e5dd
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use case insensitive comparison and static invocation
of QGuiApplication::platformName().
Change-Id: I8c197c7b4f0669f71c019fbcee09a0f03dfab399
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
By serializing the capitalization value of QFont, it ensures that it is
correctly preserved when QPicture streams it and later plays it back.
Subsequently the QDataStream version has been bumped up to account for the
change of the data format for serializing QFont.
[ChangeLog][QtGui][QFont] QFont now serializes the capitalization setting.
[ChangeLog][Important Behavior Changes] QDataStream version bumped up to
17 to account for changes in the serialization of QFont.
Task-number: QTBUG-15214
Change-Id: I042680760e5a69d18d41e786b7500a3eebbe562f
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The logic used in the FreeType font engine can be generalized
and move to the QFontEngine baseclass. This allows the CoreText
font engine to correctly report the minimum left/right bearings,
which decreases the chance that an optimization in QTextLayout's
line breaking algorithm will produce wrong results.
The calculation of left and right bearing has been moved to the
glyph_metrics_t type to reduce code duplication. This allows us
to use the with and height of the bounding box to determine if
the glyph has any contours.
Change-Id: I864697d3f31ed56f22f04666199b6c5023c5e585
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Build it only in -developer-build mode for tests that might depend
on exact-matching font behavior.
Return earlier to avoid doing any useless job.
Change-Id: I966ee5689f03403e45f4c957b63e3113f0467803
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I624deb320c378c18a29b3707f48583d53bfd5186
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
FileInfo is larger than a void*, so holding them in a QList is needlessly
inefficient. Worse, the code could come to depend on the fragile property
of (inefficient) QLists that references to elements therein never are
invalidated.
Change-Id: I772177c5ac544a5fecce2368f628148308ef260f
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QTextLayout::additionalFormats setters and getters using QList<FormatRange> have
been deprecated; port to the QVector versions.
Moved op== definition for FormatRange needed in tst_qsyntaxhighlighter.cpp
to a friend declaration in FormatRange itself, because MSVC 2008 doesn't find
it otherwise.
Change-Id: Ibab6589df057f02377d895079b56395859e3401e
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Unearthed an off-by-one error in a QByteArray::fromRawData() call in
tst_qtextdocumentfragment. Fixed by porting to QStringLiteral.
[ChangeLog][Important Behavior Changes] All conversions from QByteArray
to QString now preserve embedded NULs. This is done in order to provide a
faster conversion from QByteArray to QString that does not involve a call to
strlen. If you need the old behavior, convert from QByteArray::constData()
instead. If you are porting from Qt 4, we suggest to make your source compile
with QT_NO_CAST_FROM_BYTEARRAY before porting to Qt 5.
Change-Id: Ibca40f503920fee6f3a5f0d74a04b38b8849796f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When CSS is set in a head tag then it was not being inherited by the child
tags when the CSS specification indicates that the properties are in fact
inherited. This ensures that those properties are inherited and the non
inheritable ones are unchanged.
A test is added to cover the different situations with inheritance and a
fix is done for the QTextDocumentFragment test which was passing despite
having incorrect defaults.
Task-number: QTBUG-28770
Task-number: QTBUG-34153
Change-Id: I55966240845a885852a04ecb82c61926dea9f800
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
When the default font has the pixel size set instead of point
size, then pointSize() will return -1 and the output from the
HTML will include the pixel size instead. This happens e.g.
on Android when we extract font information from the system.
Change-Id: I26dc49fff215c9887cf0b78dcfff88df0f74450d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
rawMode only has an effect under X11 in pre-QPA times.
Change-Id: Iaff8fed8f4ae5af5dd0399bb3ebd9d590a39a758
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
tst_collections.cpp
tst_collections.cpp(3138) : warning C4305: 'argument' : truncation from 'size_t' to 'bool'
tst_collections.cpp(3190) : see reference to function template instantiation 'void testContainerTypedefs<QVector<int>>(Container)' being compiled
with[Container=QVector<int>]
(repeated)
tst_qringbuffer.cpp(297) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
tst_qringbuffer.cpp(300) : warning C4309: '=' : truncation of constant value
tst_qringbuffer.cpp(306) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
tst_qrawfont.cpp(947) : warning C4309: 'argument' : truncation of constant value
tst_qsslsocket_onDemandCertificates_member.cpp(217) : warning C4189: 'rootCertLoadingAllowed' : local variable is initialized but not referenced
Change-Id: I6143d4ad121088a0d5bdd6dd2637eb3641a26096
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
The auto-hinter in the FreeType version bundled in Qt gives
slightly different advances on some glyphs. As noted in
the removed code, this was already observed on Windows and QNX,
and recently also on Android.
I'm sure it could also happen on platforms using the system library
if the system library was the same version as the one bundled in Qt.
Instead of expect-failing the test, we simply accept both the
observed results as valid.
Note that we need to accept 9 as a result for the default hinting
preference on all platforms, not just Windows, since the default
hinting preference in FreeType can be a system setting.
Change-Id: I3cc0f33f0f66dd64419770b37c10dee457706b5e
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
On e.g. Android, the tabs will be scaled by DPI. This breaks the
logic in the QTextLayout tests for tabs. It's not possible to
just scale the expected sizes either, since the whole text layout
will be affected by font sizes and scaling, and it's difficult to
predict where characters will land on different platforms and
resolutions.
To avoid breaking this test on other platforms, we just skip them
when we know they will break. Since the code tested is
cross-platform, this will hopefully not have any significant
impact on our coverage.
Change-Id: I65d6c33c9c6724665983a17f99eadcf1baedcc20
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
