Previously, when deciding where the actual data is, Frame was calling
padding() to test if offset is needed. A curious case with a DATA frame
containing compressed body and having 'PADDED' flag set with a padding
equal to ... 0, ended in a decompression error (and assert in 6.2 code).
Pick-to: 6.2 5.15
Fixes: QTBUG-97179
Change-Id: I9341a4d68510aa4c26f4972afdcd09a530d5a367
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- process environment/DNS are OFF for INTEGRITY
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I189a97f88c96a428586c31a66b8d250e04482900
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The h2 server is running in a separate thread, so while the previous
test was finished and the server was deleted, it could still emit
and have a queued emission in-flight which would be picked up by
the next running test.
Pick-to: 6.2 6.1 5.15
Change-Id: I26b1bc711df7473032d6078f35f8aca37c40137e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
There's not much context to the URLs being printed, so remove the
message. And suppress the message coming from the MiniHttpServer
Change-Id: Ie2025ac717657ed0f2f0163bd0af22e12a49b30f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The insertions are sorted by when they expire. So, we test the various
orders to insert entries.
Fixes: QTBUG-95959
Change-Id: I1e8d7f4c77dce5eae3d4bfa5101f296c3eea1961
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace custom SRCDIR define with QT_TESTCASE_SOURCEDIR. The latter is
automatically available to all tests to use and serves the same purpose
but is not terminated by a slash.
Change-Id: I62896d0fd84ac63ac1b74a459ec1646c6bde0a46
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
To retain backwards compatibility with some QNetworkReply usage,
namely connecting solely to finished-signal and allocating a buffer to
read into, but without storing the entire decompressed file in memory
until read, we may decompress the file twice.
With this patch users can now avoid this double decompression if the
amount of buffered data stays below 10 MiB. This means any file smaller
than 10 MiB will never need to be decompressed twice to know the size of
it. On top of that, if the data is handled as it arrives (e.g. in
readyRead) and the buffer is kept below 10 MiB it won't need to
decompress twice either.
This is active as long as "countDecompressed" is true, though it
currently always is in QNetworkAccessManger, with a future goal to make
it possible to control with public API. Since it requires the user to
potentially adapt their usage of QNetworkReply.
In this patch we also stop tracking the amount of unhandled uncompressed
bytes (uncompressedBytes) in favor of tracking the total amount of bytes
which has been read() by the user of QDecompressHelper (totalBytesRead),
since we can more intuitively work out the total amount of unread bytes
using this value.
Change-Id: Ie3d8d6e39a18343fcf9b610f45c7fe7e4cd4e474
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This introduces a new attribute that allows behavior to keep
the TCP connection(s) to a HTTP1/HTTP2 host longer or shorter
than the default of 120 seconds.
Note that the server might still close the connection earlier.
Fixes: QTBUG-20726
Fixes: QTBUG-91440
Change-Id: I7da64230a78c642c12c0ddbe6b678cf17c3aafde
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's the user's privilege to do so when they want to finish reading the
QIODevice. Moreover, this is the only difference between close() and
disconnectFromServer().
[ChangeLog][QtNetwork][Important Behavior Changes] The Windows
implementation of QLocalSocket::disconnectFromServer() no longer calls
close(), which is consistent with the behavior on Unix.
Change-Id: Ie9ce20c60259a2b08f5254b719355bd7be9b17cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
These signals allow monitoring where in the HTTP1/HTTP2
flow a request is currently in.
Fixes: QTBUG-71698
Fixes: QTBUG-18766
Change-Id: Icc2fe435afc9f680fa7a76c32731e25fcdfeb4b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If the file already existed we simply removed the old one without
adjusting the size. So use the removeFile() function which takes care of
that.
Additionally, if the current size was non-null we previously increased
the size (presumably meant to be temporarily but wasn't) and called
expire() which would either:
1. not do anything and return currentCacheSize, if it was not greater
than the max size. This would mean that the size of the file would be
counted twice.
or,
2. discard currentCacheSize, measure the size of the items, and then
remove some items if the total size surpassed the max cache size
Neither of those branches need us to (temporarily) increase
currentCacheSize. It also doesn't attain the (presumed) goal of trying
to keep below the max cache size after having added the new item.
Fixes: QTBUG-95009
Pick-to: 6.2 6.1 5.15
Change-Id: I2b5b13ff473a7aa8169cf2aecfea783c97f2d09a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
To (set)decompressedSafetyCheckThreshold, as suggested on the API review.
Task-number: QTBUG-94407
Change-Id: Iffc52691022939ae46703de8a0416355487b716f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
With the recent change, 'system' headers gone: not in the test code anymore,
so, for example OPENSSL_VERSION_NUMBER is undefined, making the test
to select a wrong code-path - 'h2c', instead of encrypted h2.
Pick-to: 6.2
Pick-to: 6.1
Change-Id: I3b201e21fac56875c9045c7463e2ae69af4c6470
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Rather than when the data is received. Source compatibility is
achieved through double-decompressing the data. This lets us know
how many bytes are available just as before but without having the
uncompressed data left in memory.
Fixes: QTBUG-83269
Change-Id: I352bd09581614c582e4628243e2a0e895ba4946b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The error that the actual runtime will encounter, and not the one that compile-time
ifdefs will (potentially) erroneously select.
Change-Id: I8ef4c34bcb8b3e568bc39f8c8ea6bfb7732f9e27
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's possible that Qt is built with OpenSSL and some other backend.
The ifdefs generated are not mutually exclusive anymore, as it was
in the past. So tests should rely on the actual backend they have
working at runtime.
In the process of fixing the auto-tests, modernized feature #if-ery and
some associated compilation issues.
Fixes: QTBUG-92875
Change-Id: I2be1b924d506fd36dc4e2c6c9158b5023ff87f32
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
For some reason the test case was (no longer?) detected by moc
Change-Id: I20f20de76479f7d9db43fae985cefe0869a7e203
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The BASE argument of qt_add_resources now denotes the root point of the
alias of the file. Before, BASE was merely prepended to every file that
got passed to qt_add_resources.
Old behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "images/button.png")
Alias is "../shared/images/button.png", and pro2cmake generated
QT_RESOURCE_ALIAS assignments to fix this.
New behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "../shared/images/button.png")
The alias is "images/button.png". No extra QT_RESOURCE_ALIAS assignment
is needed.
The new behavior is in effect for user projects and for Qt repositories
that define QT_USE_FIXED_QT_ADD_RESOURCE_BASE. Qt repositories will be
ported one by one to this new behavior. Then the old code path can be
removed.
Pick-to: 6.1
Task-number: QTBUG-86726
Change-Id: Ib895edd4df8e97b54badadd9a1c34408beff131f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Already blacklisted on the other linux versions, but is failing on
SLES now in 5.15
Pick-to: 6.1 5.15
Change-Id: I267908adf94ede51e5520aa2cb806b394fb0438e
Reviewed-by: Tarja Sundqvist <tarja.sundqvist@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And use this in the authenticationRequired test.
Pick-to: 6.1 6.0 5.15
Change-Id: I18e991eb67168214c2c4f829afaca5018568e989
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
With Qt 6 we made HTTP/2 default, which exposed missing handling of
401 Unauthorized (and 407 Proxy Authentication Required).
In HTTP/1.* we would handle this after the response had finished, while
handling the status code. For h2 this path isn't used since it is
heavily reliant on the structure we have for HTTP/1.* (one request per
channel). So we must handle the status code and header directly.
Having that part fixed exposed another issue - when resetting/rewinding
uploaded data we were not resetting the 'totallyUploadedData' counter in
the reply (this, in turn, exposed another small issue). Because of that
we did not actually send any data on the retry, only sending the
content-length followed by no data.
Finally, the small issue mentioned in the previous paragraph was how we
check if we have uploaded all our data. It was only checking if the
byte-device was atEnd(), which it was. But only because it had not yet
prepared any data for us.
Fixes: QTBUG-91284
Pick-to: 6.1 6.0 5.15
Change-Id: I798d105b02688b18a02897cc476f19f57a47f98f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The qt_ForceTlsSecurityLevel symbol is not defined if SSL is not configured,
so don't use it in the QNetworkReply test if it's not.
Change-Id: Id3110a1997fea1648b48bfc411e90e7efe306678
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
All TLS (and non-TLS) backends that QSsl classes rely
on are now in plugins/tls (as openssl, securetransport,
schannel and certonly plugins).
For now, I have to disable some tests that were using OpenSSL
calls - this to be refactored/re-thought. These include:
qsslsocket auto-test (test-case where we work with private keys),
qsslkey auto-test (similar to qsslsocket - test-case working with
keys using OpenSSL calls).
qasn1element moved to plugins too, so its auto-test have to
be re-thought.
Since now we can have more than one working TLS-backend on a given
platform, the presence of OpenSSL also means I force this backend
as active before running tests, to make sure features implemented
only in OpenSSL-backend are tested.
OCSP auto test is disabled for now, since it heavily relies on
OpenSSL symbols (to be refactored).
[ChangeLog][QtNetwork][QSslSocket] QSslSocket by default prefers 'openssl' backend
if it is available.
[ChangeLog][QtNetwork][QSslSocket] TLS-backends are not mutually exclusive anymore,
depending on a platform, more than one TLS backend can be built. E.g., configuring
Qt with -openssl does not prevent SecureTransport or Schannel plugin from being
built.
Fixes: QTBUG-91928
Change-Id: I4c05e32f10179066bee3a518bdfdd6c4b15320c3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As suggested in the API review.
Amends 37bd7b5733
Pick-to: 6.1 6.1.0
Change-Id: Ic3e8567f349568dc3b4dbf79be27c304b39480cf
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is to avoid false positives.
By default files are large if uncompressed size > 10 MB. Only configurable internally.
Also add auto tests.
Task-number: QTBUG-91392
Pick-to: 6.0 6.1
Change-Id: I32258cb7c957f2a23a05157ba4ed5c0af2ba585e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Fetched from the authoritative source, verified the content matches
that of the current master revision in the github repository.
Amend one cookie jar test to find the last group in the last chunk
correctly - each group arises from a non-empty hsah-table entry, but
the last few hash-table entries may be empty, in which case the last
group isn't just before the last index, it's earlier by the number of
empty hash table entries. In the process, amend this test and the
related test of the end of the first chunk to iterate all the entries
in the group (in the present version, as it happens, each end-group
has just one entry, but that may vary).
Task-number: QTBUG-90214
Pick-to: 6.0 5.15
Change-Id: I6da365a6ca558124f8275e392735071dc77e04bb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Looking at grafana it rarely fails in dev so unblacklisting it.
Though it is a little more flaky after switching to http 2 by default
because then we only have one channel and more requests end up queued in
the same channel, which will get errored out when the server
disconnects.
Task-number: QTBUG-88943
Change-Id: If5d6335864ce6bbc35f519b2c6d7068e4181afd2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
headFromHttp hasn't been flaky since 5.14 times according to grafana,
does not fail locally.
Same situation with ioHttpRedirect as above.
ioHttpRedirectMultipartPost has not failed on Windows since october
2019, assumed stable now.
backgroundRequestInterruption no longer exists.
ioPostToHttpFromSocket would fail in debug MSVC builds but was
fixed in 710886fbdd.
Task-number: QTBUG-88943
Change-Id: Ida640179ef15a3452291745e4e94a71a385f57ae
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test in general is fine, but it was making an assumption that the
first 5 readyRead emissions would never result in the whole message
being received. In certain scenarios with slowdown however it was still
possible that we would receive the whole message after just a few
readyReady emissions. While I didn't check it's most likely due to a
mechanic in the QNetworkReply machinery where we suppress some
emissions if we know there's more data just about to be available.
Task-number: QTBUG-88943
Change-Id: I0cf06edb34d4e86cc8a42c0f1cd7e8c35765f6ee
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Which contains a lot of 'macos'/'osx' black-listed auto-tests. They
mostly fail with SecureTransport (on BigSur) because SecTrustEvaluate()
does not like our old certificate. Instead, since SecureTransport
is deprecated anyway and we are not planning to develop it in future,
skip the related auto-test depending on QT_CONFIG(securetransport).
Task-number: QTBUG-88943
Change-Id: I5f6cb7b2d0ea15c445603c1ff3e1700f123c28d1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It was blacklisted due to the issue there. The issue is resolved, but
the blacklist stayed.
Task-number: QTBUG-88943
Change-Id: I7d9a660a17c1463dd8b654752ed5787fe5f5af24
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The requests will remove themselves once they get deleted
but since the deletion is done through a _queued_ invokeMethod
to 'deleteLater' we will call
QHttpNetworkConnection::_q_startNextRequest first which may
end up starting a reconnect of the TCP socket which we had the error on.
In this specific instance it manifested as a race condition where we
either don't get a proxyAuthorizationRequired signal at all (it was
emitted while we didn't have any valid replies), or we get the signal
emitted too late and it gets emitted on whatever the next reply was.
Task-number: QTBUG-88417
Pick-to: 5.15 6.0
Change-Id: If3f8ececc5550f1868c90124559cb8e3029646d8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test authenticationCacheAfterCancel was the only one to fail
in recent COIN runs. This patch blacklists it on Ubuntu 20.04.
Task-number: QTBUG-88417
Change-Id: Idc85499da82336d291d9a90ecb941810a0e6c935
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The former *.platform.sh entry has been replaced by more specific
entries, replacing the wildcard with only selected second levels.
Task-number: QTBUG-87925
Change-Id: Ie4ba7c66ba9aa40eafe23f02faa12f19d791cff2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Ubuntu changed the default level from 1 to 2 and not accepting our
RSA 1024 anymore. While we are not testing the TLS library's strength,
we re-generate a ceritficiate to shut the thing (the botched, 'fixed' OpenSSL)
up for good.
Task-number: QTBUG-86187
Change-Id: I6151ce5210972ae938e52731157742910363afbe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
To avoid potential decompression bombs. This is implemented with just
a simple check that the ratio doesn't pass some hardcoded preset.
Change-Id: I17246f0f43e73280cdb35a8f03d65885f5678ad6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qt_add_test supports now QT_TEST_SERVER_LIST, which will add the test
servers as docker test fixtures.
The docker server will be started before the test is run, and stopped
after the test is run.
Running the tests in parallel is not supported.
Docker tests are currently only supported on Linux hosts.
Task-number: QTBUG-85034
Change-Id: If3cefe05c5dec19c14b05d2fa8b01a0b6d95e259
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CentOS it seems not only backported some OpenSSL 3 functions,
but also raised the default security level to 2, making some of
our keys (and MDs?) 'too weak' and failing auto-tests here and
there as a result. For our auto-test we lower the level to 1,
as it is expected to be.
Fixes: QTBUG-86336
Pick-to: 5.15
Change-Id: I7062a1b292e8b60eb9c2b2e82bd002f09f9da603
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Our authentication code is race-y by design:
1. When two requests are fired off and queued at the same time in the
same QHttpNetworkConnection then if one of them encounters
"authentication required" then it will copy whatever credentials it got
to all the other channels in the connection. This is likely what the
first part of the test is testing.
2. If a later request is fired off and it includes credentials in the
url then the newly included credentials should be used instead of the
cached ones.
The race here can occurr when one socket either takes too long to
connect or the connected signal is not received early enough. Then the
first socket is used for both requests and then we can hit case #2 when
the url contains credentials.
Pick-to: 5.15
Change-Id: I646a5378d8c1256b2de98b51912953df29f68cb2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
While we initially wanted to just disable the functionality the way it
is currently built forces people to do a full build of Qt just to enable
it. Instead of doing this half-measure let's just remove the code
completely from QtBase and rather prepare QtNetwork to handle being a
plugin that can be compiled at any time.
Task-number: QTBUG-80340
Change-Id: I19155c8c167cf932088f01b2a9706d0e7ab792d1
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
It wouldn't grab the cached entry since it was not deemed
"fresh" (and would never be fresh because we didn't know when it
originated from or when it expired). But the test still passed because
the reply produced a "finished" signal which ended the loop, but the
"finished" signal was due to an error which was unchecked.
Change-Id: I6ad271aa621bdb4a48b74bc8fd64c7e2caa8f179
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
HTTP/2 is only used initially before it transitions to using HTTP/1.1,
and in this case the amount of connections established should also
reach 6.
Change-Id: I300e171e46c846df1730c07469ea85a51cecfb63
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Also take this opportunity to reshuffle the content-encodings in the
intended ordering since the ordering is used to signify priority.
Task-number: QTBUG-83269
Change-Id: I022eecf1ba03b54dbd9c98a9d63d05fb05fd2124
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not following redirects is not a feature, but just a hastle for everyone.
The main issue with switching this default is that applications that
actually do manual redirect handling will break in various ways.
FollowRedirectsAttribute was removed as it no longer serves any
purpose beyond duplicating the default value.
[ChangeLog][Network] QNetworkAccessManager now follows redirects by
default with the NoLessSafeRedirectPolicy.
[ChangeLog][Potentially Source-Incompatible Changes]
QNetworkRequest::FollowRedirectsAttribute was removed and has been
superseded by QNetworkRequest::RedirectsPolicyAttribute
Fixes: QTBUG-85901
Change-Id: Ic5b776180a4b84ac4fc895158bb5a66a3c91a042
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Before the introduction of QDecompressHelper gzip was preferred over
deflate. The change seems to be accidental. Amends commit
7b76379a89.
Change-Id: I70f33d551912465d63f49ea3db1ac3575d19a92d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Changes are not too big for now. Just replaces use of the previous
calls to the zlib decompression function. And initialize
QDecompressHelper when we know the content-encoding.
Task-number: QTBUG-83269
Change-Id: I41358feaef2e7ac5f48f14e3f95ec094e0c110b7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
To support streaming decompression in QNAM.
Will also be used to refactor existing decompression code in QNAM.
Task-number: QTBUG-83269
Change-Id: Iecf3e359734163f15686c949f75d41fa4794a00e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And generate a few more test projects that were missing.
Change-Id: I5df51106549aa5ae09bc3c42360e14b143719547
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The change creates a slight source incompatibility. The main
things to take care of are
* code using printf statements on list.size(). Using qsizetype in
printf statements will always require a cast to work on both 32
and 64 bit.
* A few places where overloads now get ambiguous. One example is
QRandomGenerator::bounded() that has overloads for int, uint and
double, but not int64.
* Streaming list.size() to a QDataStream will change the format
depending on the architecture.
[ChangeLog][QtCore][QList] QList now uses qsizetype to index into
elements.
Change-Id: Iaff562a4d072b97f458417b670f95971bd47cbc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
CL = Content-Length
The uploadByteDevice was kept after a redirect which caused the
internals to assume that we had to upload the data. Even if this was
not the case we still transmitted the Content-Length header from the
first request which was now stored in two places.
Fixes: QTBUG-84162
Pick-to: 5.15
Change-Id: Ic86b1ef0766ffcc50beeed96c1c915b721d40209
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Will be useful when DecompressHelper gets taken into use for both.
Task-number: QTBUG-83269
Change-Id: Iaf253219bed193025c2b82d6609f4dcc4de33df8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The fromUtf16(ushort*) and fromUcs4(uint*) overloads are going
to be deprecated. Use the newer fromUtf16(char16_t*) and
fromUcs4(char32_t*) overloads.
As a drive-by, use std::end()/std::size() where applicable.
Change-Id: I5a93e38cae4a2e33d49c90d06c5f14f7cb7ce90c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
All remaining pieces are gone, configuration included.
Relevant CMakeLists and configure.cmake were regenerated.
Fixes: QTBUG-76502
Change-Id: I667b5da7e3802830d236d50b5e9190c2ee9c19e2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Sometimes this test would fail due to the session not actually being
reused. The cause of this was that the requests were sometimes being
completed 1-by-1, enabling the individual requests to re-use the
already-connected socket completely because it stayed connected.
Setting the Connection-header to close lets us be sure that
the socket cannot be re-used when the request is finished.
Fixes: QTBUG-82846
Change-Id: I5da8baa50a3a45fb60f1e1613e500e3e9c034fb0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This reverts commit ccb2cb84f5 and
commit 0f568d0a67.
The patches fix ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commits to keep the getter as is and change the signal name instead.
Change-Id: Iddbab7c33eea03826ae7c114a01857ed45bde6db
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the signal) is deprecated; superseded by errorOccurred()
Change-Id: I11e9c774d7c6096d1e9b37c451cf0b99188b6aad
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This reverts commit 94b3dd77f2.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I0dd60cf1ae9d1bd95beeb8ad58661ca4b1fb63b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If necessary, the feature still can be enabled with -feature-ftp.
Task-number: QTBUG-80339
Change-Id: I7dafaad254d1396f24ac5c339d55c3bedfa97f1c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
This way we produce valid xml also for the no-proxy case.
Change-Id: I5a277255d22c3814fe463c0cd013c04ddc6ad919
Reviewed-by: André Hartmann <aha_1980@gmx.de>
