TestMethods::invokeTest() has an outer loop on global data (albeit
with a comment that said otherwise). On its first cycle, we run the
test function's *_data() method, if it has one; there is an inner loop
on the rows this created. If the *_data() QSKIP()s, we need to skip
the whole test; otherwise, a QSKIP() in one sub-test should not lead
to skipping the remaining sub-tests.
Moved the check for *_data() QSKIP()ping to right after *_data()
returns, inside the "first global cycle" block that runs it.
Previously, this check was done before entering the loop on local data
rows, but outside that "first global cycle" block: consequently, later
global cycles would fall foul of this check (even though the *_data()
hasn't been run in this cycle, much less QSKIP()ped in it) if the last
sub-test of the previous global cycle had QSKIP()ped.
When running a single test for one specific data row, if the test's
*_data() QSKIP()ped, this misplaced check would also have lead to a
misleading "Unknown testdata" warning.
Changed testlib/selftests' tst_globaldata::skipSingle() to trigger the
bug (by having its last local row of first global row skip, which
caused the second global row to be omitted) to verify this is also
fixed; and amended one of its comments to reflect what's now to be
expected. Updated the test's expected output files.
Task-number: QTBUG-61774
Change-Id: I99596b595c6d1184038f23383844c6ff51a0cd91
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Removing connections and resizing the signal vector now
happens in a way that will not interfere with activate(),
as the old objects won't get deleted if we are somewhere
inside a signal emission.
This means that we don't need to lock the senders mutex
in activate anymore, as long as the reference counting
on the ConnectionData is atomic and we are in the senders
thread.
This implies that we now need to lock the receivers mutex in
queued_activate() abd blocking queued activation to ensure
it hasn't been deleted while we are emitting.
In addition, some precautions need to be taken to not read
from the receiver without holding the lock, as it could get
deleted while we're activating (if it's in a different thread).
To make that possible store the receivers thread id in the
connection data.
Use atomic pointers for all variables that can get modified
with the signalSlotLock() held and that are being read
without the lock being held.
This gives us a very nice additional speed improvement
for signal emissions.
without change with change
string based connect: 3287 2436
pointer based connect: 3941 3265
not connected: 403 400
disconnected: 460 489
5 slots connected: 9112 4515
Change-Id: Ib7324bb74c389dcc3b6581a03c31469a6e589fc2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
And use it to clean up the reimplementations in Qt DBus.
Change-Id: I8e3fe35e8db6405cbcbfb45b42a8f2efecc1cef0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Put all connections that get disconnected into a singly
linked orphaned list.
Whenever the refcount on the connectionData drops down to
one, this list can safely be cleared, even with the planned
removal of locking in activate().
Use an id integer in the connection to acoid activating newly
added connections.
Fixes: QTBUG-72649
Change-Id: Ide3d116ae7fc9ca497598c1c2b71d43b4339c92d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The DNS entry for the host has changed, dig answers with dns.google,
not with google-public-dns-a.google.com. While developing a proper
fix to the test, blacklisting this particular lookup allows
integrations to pass in the meantime.
Change-Id: Id37da6b24554803bf4e2c84be5b949ded40566e8
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Avoid using inline assembler
Task-number: QTBUG-72716
Change-Id: I696efb5a787416eb4fc5ba3a250461aaa9a4afc2
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Do not categorize the license anymore as 'Public Domain', because the
actual text is not explicit on whether it allows modifications. Instead
show the original license text.
Also remove the Homepage link, which now just displays (arguably
outdated) information about patents.
Finally, do not misuse the "Version" field for metadata information,
use the newly introduced "PackageComment" field instead.
[ChangeLog][Third-Party Code] Changed classification of the wintab
license from Public Domain to Custom.
Fixes: QTBUG-74453
Change-Id: Ibae36be1deee3b9c498c45d03ed741c3d5ff630c
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Otherwise it can happen that we pick up the tool for the host system,
which will break compilation.
Users can still pass
-psql_config /path/to/pg_config
or
-mysql_config /path/to/mysql_config
manually.
[ChangeLog][QtSql] When cross-compiling pg_config, mysql_config
are not looked up in PATH anymore. Pass -psql_config path/to/pg_config
or -mysql_config path/to/mysql_config to explicitly enable PSQL or
MySQL in this setup.
Fixes: QTBUG-73565
Change-Id: I35ff32322bac69f1575ce6c846a56ac2ae3b8d55
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The one shipped with cmake is more modern:-)
Change-Id: I024769825467734ff1527e91df4cf5dfc38cbe68
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
The test was added as commented in 2012, before it was not even
mentioned in the pro file. I guess it was never run.
Change-Id: Ib787c7811ab4f7f32a99869167cde2e12dbe3156
The ParseResults may be a nested list of list. Now the code doesn't
raise exceptions, but it fails in do_include as includes that doesn't
provide resolved path will fail. Anyway step in the right direction.
Change-Id: Ice44e4c10d221293cc6c1facca30abd5495791be
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
One directory may contain many pro files. The generator was happily
generating the same CMakeLists.txt for all of them (overwriting).
This patch implements a different logic. It tries to find the main
pro file and skips others assuming that somehow implicitly they will
be incorporated (for example through SUBDIRS).
Change-Id: Ie07d75e900a96dd48bf981a896c9dfb920f39a23
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
We do not need to validate everything, while converting project
files. Some checks can be left to building step.
It fixes some false positive NOTFOUND errors.
Change-Id: I81ff2421fdea13add0bfc03086152a47bce39908
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
It is regression caused by a0a94576fa
("Fix RemoveOperation").
Add unit test for all operation types to make sure this code actually
works:-)
Change-Id: I97c94cb3411f05de89422e3fa2222f2217a09e49
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The install path takes into account the path structure of the source
directory, so that not all tests are bunched up into /tests, but
rather /tests/auto/foo/bar.
Change-Id: I5e32d2e41ae8f095f4eac6654973508efd598df0
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
It is constantly passing according to grafana.
Change-Id: I4953cd54e27adde8dad79e9a0f025960802e6c7a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Only require TYPE if no OUTPUT_DIRECTORY, ARCHIVE_INSTALL_DIRECTORY
and INSTALL_DIRECTORY is provided.
Change-Id: I6db1cfaa576bfa3ee3dc8ecf81db20e3afcd61e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Fixed the other tests that used the methods, so that they now get the
data from QLocale instead; and added the missing feature #if-ery, as
these are textdate methods.
Change-Id: I896f356bdf88037db23590c71d0aeb0b8722bfa7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
The code had min and max of an integral type and tested min + min / 2,
which naturally overflowed, provoking a compiler warning. The test
was meant to be testing min - min / 2; but min is even, so this is
just min / 2; and doubling that won't overflow (which is what the test
is about). As it happens, min + min / 2 is in fact max - max / 2,
which *would* be a good value to test, since max is odd. So add a
test for that and remove the broken test.
Change-Id: Iec34acbf0d5d7993d41ff844875dc10480b8eb1f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In particular, document the mis-behavior it takes for granted in one
test. Renamed some variables so that they're visually distinct from
one another and actually mean something intelligible. Renamed the
sub-tests to say what's actually happening. Reading the test output
now at least makes it possible to see what's wrong. I'll fix that in
a later commit.
Task-number: QTBUG-61774
Change-Id: I3e5f83b8baa3c6afbca9231b5bbc89d17f3e57e2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Don't just wait for 300ms for the thread to finish, this can
lead to faling tests esp. on slow hardware.
Also fix a mem leak.
Change-Id: Ifa90da5507fc6d65ef77e368d7c238271623ff53
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
