If a widget inside a QGPW has a proxy focus, the code would keep
sending focus in events to the proxy even if the proxy was already
focused. Amend the check in place to prevent this from happening.
Change-Id: Id28d3bfe4f396da5c9477df713441ca7d506662f
Fixes: QTBUG-51856
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When the tested widget has a focus proxy, then we should check if the
current focus widget is not the same as that focus proxy before setting
it to be the widget that gets focus. This ensures that when back-tabbing
from a widget like QDoubleSpinBox that it will not get stuck inside that
widget and will back-tab to the next correct one.
Fixes: QTBUG-81097
Change-Id: I3f689c7715da7f3ce8c3d2f616041528f5778a2f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We don't know which versions these blacklistings actually apply on
unless we actually get macOS 10.14 and 10.15 into the CI and running
tests, so let's start with that, and then granularize the blacklists
after that.
Task-number: QTBUG-75786
Change-Id: Id79642afa50cb20efa2cd209286b6933918d3a4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The test expects a very explicit list of events during show, but on
macOS we also get an InputMethodQuery event as a result of the window
becoming active. The test needs to be written significantly to support
these kind of platform differences.
Change-Id: I395c1e9e4e9baf7d9f88f0d067586fc15afb9a16
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For some reason the firstChild gets the focus when clearing the focus.
This seems to be timing dependent, as removing the 30ms qWait 'fixes'
the issue. So does a processEvent call before minimzing. Both of these
require further investigation.
Change-Id: I62833a5541712f97dc24bc63384fa4c051096537
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There's a timing issue that affects the position of the vertical
scrollbar when scrolling by pixels.
Change-Id: I29d73574785be539a5870b498a902b1aba887e9c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's not clear why this is failing, but we need to blacklist it so that
we can move over to testing macOS 10.14 and 10.15 in the CI.
Task-number: QTBUG-75786
Change-Id: I208d5af92406c5da8d0210e0188568466b78b2a9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The combobox popup can overlap a little with the button, and that's the
expected behavior.
Change-Id: I245bfce85cb5ee661ceb51dbe0d844492878a2bc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The platform window may create or destroy its surface from other entry
points than the QWidget API, in which case QWidget needs to sync up
its own state to match. In particular WA_WState_Created and the winId
needs to be recomputed.
Fixes: QTBUG-69289
Fixes: QTBUG-77350
Change-Id: I769e58ead3c2efcf8c451c363108848feade9388
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
In some cases when editing the text (for example when removing the
selected text, or pasting a text block) the text cursor position is
updated, but its visual x position is not updated. This causes the next
cursor movements to start from a wrong position.
Force the update for those cases.
Fixes: QTBUG-78479
Change-Id: Ia496be62beec58660f5e1695e5aafae09c79684e
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
We need to reset the pressed index when the decoration was pressed on
otherwise if the mouse ends up over an already selected item that was
previously clicked on. This prevents it from thinking that the mouse
has been released on this item right after pressing on it.
Fixes: QTBUG-59067
Change-Id: Iab372ae20db3682ab0812661f86533079ba4083c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
When the geometry of a hidden widget was set with setGeometry(),
WA_PendingMoveEvent and WA_PendingResizeEvent were set unconditionally
even if the crect already had the correct value. This lead to
unneeded Move/Resize events within sendPendingMoveAndResizeEvents().
Fixes: QTBUG-75475
Fixes: QTBUG-79906
Change-Id: Ibbe03882f039948b6b7c04887420741ed2e9c0f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Consider this simple example:
QLineEdit edit;
edit.setInputMask( "9-9-9-9-9-9" );
edit.show();
Without any input, m_text will contain: " - - - - - ". text() removes
the input mask's mask characters from that and returns " ". A string
with 6 spaces. Thus currently the End key jumps to position 6, which is
in the middle of the string. Using m_text the End key jumps to the actual
end.
[ChangeLog][QtWidgets][QLineEdit] Fixed End key in combination with
certain input masks.
Task-number: QTBUG-16187
Task-number: QTBUG-20414
Change-Id: Ibb30a1dfa2f78103611b5afc9971dc43e8bdcc4a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Within QTreeView::setModel() the header might emit columnCountChanged
which then tries to update the geometries based on the old model which
is wrong.
Fix it by setting geometryRecursionBlock to true so
QTreeView::updateGeometries() will not ask the old model for it's data.
Fixes: QTBUG-75982
Change-Id: Ia0dd36cd7c6c5347fbc285deac43da6941accbe7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Since the test was fatuous for i == 0, iterate from i = 1, instead.
Change-Id: I9b9c1b7b10639aefdd74f48051d592da4f84dc85
Reviewed-by: Jesus Fernandez <jsfdez@gmail.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If a font with only a family set is resolved with one that has been setup
with setFamilies() then the family needs to be prepended to the families
list after resolving. This is so that the font still prefers the one set
as just a family with no famillies set.
This also amends the QFontDialog test to account for this too.
[ChangeLog][QtGui][Text] Resolving a font that just has a family set
with families set will prepend the family to the families so that it
is still the first preference for the font.
Task-number: QTBUG-46322
Change-Id: Icc4005732f95b2b4c684e592b06b31e133270e44
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When a window is closed, then it will cause the child windows to be
closed as well as a result. Therefore in order to ensure that they are
shown again as a result, we need to remove the WA_WState_ExplicitShowHide
attribute if the widget was not already hidden before. This enables us to
test for this attribute when calling showChildren(), so that if the
window has a windowHandle then we can make sure that this widget is shown
again.
Fixes: QTBUG-73021
Change-Id: I1186242b889899dfcd38d782a67567348e2055ee
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
See the comment in the test for details.
Change-Id: Ie3d356e476ba0419d304bccd396fc18a831a30cd
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When the first column is hidden or not visible in the current viewport,
it is not possible to deselect the current row.
Fix it by passing the correct column to
QItemSelectionModel::selectedRows() when testing if the current index is
selected.
Fixes: QTBUG-79092
Change-Id: I9d8082d2b29ad2f799156aee910c6ff6e3217771
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QDesktopWidget is marked as obsolete in docs, but it is not yet
completely deprecated, some of its methods are still in use.
Replace uses of the following methods marked as obsolete:
- QDesktopWidget::screenNumber(QWidget*) -> QWidget::screen()
- QDesktopWidget::screenGeometry(QWidget*) -> QWidget::screen()->geometry()
- QDesktopWidget::availableGeometry(QWidget*) -> QWidget::screen()->availableGeometry()
Task-number: QTBUG-76491
Change-Id: I2cca30f2b4caa6e6848e8190e09f959d2c272f33
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When calculating the header section size based on its contents when a
stylesheet is used, the size hints from the stylesheet are used. In case
if the stylesheet specifies only one of the sizes, the other is set to
-1. Because of this the actual content size is ignored.
The solution is to calculate the size based on the application style, in
case if it's not specified in the stylesheet.
Fixes: QTBUG-75615
Change-Id: I3453fa623d75b6b32832edf753de6e3e4e7f5a22
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
- Replaced the usages of the following deprecated APIs:
* QDesktopWidget::screenCount() -> QGuiApplication::screens().size()
* QDesktopWidget::screenGeometry(int) -> QGuiApplication::screens().at()
* QDesktopWidget::screenNumber(QPoint) -> QGuiApplication::screenAt(QPoint)
- Added notes for the QWidget *QDesktopWidget::screen(int), which
currently has no replacement.
- Fixed the tests to build conditionally, only when these APIs are
enabled.
Task-number: QTBUG-76491
Change-Id: I2fdec96d0a6a4fc782c53549b05a5556412b8305
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A previous fix has caused a performance degradation while adding a
check for avoiding adding duplicated rectangles to the update list.
This patch fixes it by using a std::set instead of a QList, avoiding
duplication while using an O(log N) operation, instead of the O(N)
used before.
Fixes: QTBUG-77952
Change-Id: Ifa9fbf110e0bad60ee02a42d91281981fd98ceab
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The childEvent handler sets the enabled property of children as they are
added to the groupbox, but applications might later enable children and
check/uncheck the groupbox's checkbox in undefined order. In that case,
we would end up with enabled children inside a conceptually disabled
groupbox (the groupbox's checkbox represents the logical "disabled"
state), which breaks documented QWidget::enabled rules.
To make sure that all children are disabled as per the state of the
groupbox, we need to run that logic once the UI has been set up, and
before it becomes visible. This is what polishing is for, so listen
for that event in addition and handle it the same way as adding (which
duplicates things, but keeps existing code that might depend on things
being updated as they are added working).
Adds the case to the existing enabledChildPropagation test case.
[ChangeLog][QWidget][QGroupBox] Always disable children of a checkable,
unchecked group box before showing.
Change-Id: I978bd27b6f1a3f54ec745faeea529a98d0d93619
Fixes: QTBUG-25938
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The fix for QTBUG-35203 set the Alt+Right shortcut on the next
button, clobbering the Alt+N shortcut from parsing the text (similar
for other languages). Add a separate shortcut for Alt+Right since a
button may not have several shortcuts.
Amends 6714196f45.
Fixes: QTBUG-78604
Change-Id: I1367da739c35fbd011d11f850c9bc3915113c644
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Cleanup QTreeView autotest:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations / replace with QTRY_foo() calls
- use override
- use QStyledItemDelegate
Change-Id: I0e2d023254ed9f6f5d94cebf4d4358351cc4c3e2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Cleanup QTreeWidget autotest:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations
- use override
Change-Id: I2c07e95871d8725366cddd5cd098010709c8dc55
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Those values must be scaled to device coordinates - otherwise borders,
margins etc. will be too small when rendered on high dpi devices
(printers etc.).
This change will add the scaling to those values.
QTextDocument::print applies 2cm margins to the root frame of a
unpaginated QTextDocument. Those margins were previously scaled to
device coordinates in order to give the correct result. But because
scaling is now done inside QTextDocumentLayout that scaling must be
removed and pixel values based on qt_defaultDpi are provided instead.
Fixes: QTBUG-78318
Change-Id: I6fe6dcc25f846341f6a2fe5df2f54baea473fdfd
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Since 9c8d1ca18b, the test would fail
when High DPI scaling is enabled:
FAIL! : tst_QWidget::translucentWidget() Compared QImages differ in device pixel ratio.
Actual (actual): 2
Expected (expected): 1
.\tst_qwidget.cpp(8913) : failure location
Set the device pixel ratio on the expected pixmap to fix this.
Change-Id: I517495931c2c6b1f49125bb4b5836e304bdbf545
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Cleanup QTableView autotest:
- use range-based for loops where possible
- use nullptr
- use member initialization
- use new signal/slot syntax
- remove a lot of c-style casts
- use static invocations
- use override
- instantiate objects on stack instead heap to avoid memleaks
Change-Id: I52fee26697b1732afa9f965e600d4c59551370ce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Cleanup QTableWidget autotest:
- use range-based for loops where possible
- use nullptr
- use member initialization
- use new signal/slot syntax
- remove a lot of C-style casts
- use static invocations
- use override
- instantiate objects on stack instead of heap to avoid memleaks
Change-Id: I99ed144caab88d648d5ab987ce0963fbc6f1197d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QShortcut::event() did not call the base class implementation
QObject::event() which caused that e.g. QEvent::DeferredDelete was not
handled.
Fix it by calling QObject::event() when the event was not handled.
Fixes: QTBUG-66809
Change-Id: Ideebc980bc658f8f2b9ec4417e738bccda5eeab5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The enum OptimizationFlag::DontClipPainter is deprecated and not used in
the code since Qt4 times. Therefore also mark it as deprecated so it can
be removed with Qt6
Change-Id: I318a55cf42e7a233d13d4ec0144e1977251f5c92
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The minimum supported version is Windows 7. Remove
QOperatingSystemVersion::WindowsVista added by
b0cd007335 and replace with "true"
wherever it was used.
Change-Id: I08c0208467b655a921b6773f77d8bc099be69031
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QGraphicsItem::ItemMatrixChange has been deprecated since 5.14. Fixed
the usage in tests to compile condinionally, only when it is available.
Change-Id: I63e892a01a50fb9ac51bf38eb761cb26375bc194
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
This can, of course, only be done in private APIs - but comment on
public APIs to do the same at Qt 6.
Change-Id: I3c79951572be3c37b0b0c5b1b05bced051a40964
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The test requires High DPI scaling to be disabled since it
captures widgets.
Turn it off initially and introduce a member variable
containing a suitable size depending on the screen to make the
test pass on High DPI screens without violating minimum window
widths on Windows.
Change-Id: Ida9f306cff6abd48ee5de7001c7670a0da60c6c2
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
