...with a failing test case for QTBUG-77299.
Task-number: QTBUG-77299
Change-Id: I42c4fc4bb96f8660f8ff9bea97e6096ca6cec972
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When running Qt autotests on a developer machine with a high
resolution, failures occur due to either some widget becoming too
small, some rounding fuzz appearing when Qt High DPI scaling is active,
or some test taking screenshots failing to deal with device pixel
ratios != 1 in the obtained pixmaps.
It is not feasible to adapt all tests to pass on high resolution
monitors in both modes (Qt High DPI scaling enabled/disabled). It
should be possible to specify the High DPI setting per test.
Previously, it was not possible to set the Qt High DPI scaling
attributes since they must be applied before QApplication
instantiation.
Enable this by checking for the presence of a static void initMain()
function on the test object and invoking it before QApplication
instantiation.
Prototypically use it in tst_qtimer and to turn off High DPI scaling for
tst_QGL.
[ChangeLog][QtTestLib] It is now possible to perform static
initialization before QApplication instantiation by implementing a
initMain() function in the test class.
Change-Id: Idec0134b189710a14c41a451fa8445bc0c5b1cf3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QTreeView allowed to set the sort column to -1 which shows the data in
it's natural order (when the model supports it). This functionality was
removed during the porting away from the deprecated sortByColumn(int)
functionality done in d0f909f8db
Readd the functionality and also allow it for QTableView.
Fixes: QTBUG-77419
Change-Id: I96b0c09ab9da36ca0a9de58fe0f37e2c56b1d51b
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: David Faure <david.faure@kdab.com>
This functionality is especially convenient if meta-object system is
heavily used in a test. For example, if you need to test a bunch of
signals based on their names and/or argument types.
Change-Id: I09a4ecbbd3d0859b5fd466d9dde7679804eb7614
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
After comparing colorspaces was remove from QImage equality, the test
was no longer testing what it was supposed to.
Change-Id: Ie7ee8ac2f488ea4254086cbb91a2662dc729e80b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
... in case of a test failure. QAutoPointer is private API, but here we can use it.
Change-Id: I45b734385cd13fdea95d0100f2d8152f969612f9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Windows resource files support a subset of C preprocessor directives.
Among others they can have #include directives.
Use QMake's own scanner to retrieve the files that are included by a
Windows resource file and add them to its dependencies.
For the test case the TestCompiler class had to be extended:
runCommand is now public, and commandOutput is less peculiar.
Fixes: QTBUG-3859
Change-Id: I138703352c37c98297c0574a9a440510c1c494b8
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This happened to work by chance, as QList::insert() would
gracefully handle out of bounds insertions.
Change-Id: I7ee1e645ed9a538946a509957ce5155641ffea1d
Reviewed-by: David Faure <david.faure@kdab.com>
This commit adds transitive dependencies to the plugins, so that a
sane set of default plugins get auto-imported when linking against a
module. It also provides a new function, qt5_import_plugins(), which
allows you to override the set of plugins that get imported. The decision
of whether or not to import a specific plugin is based on several custom
target properties and a very clever generator expression.
Note that this change only imports plugins on static Qt builds. It
does nothing on shared Qt builds, as the shared libraries already have
their own plugin import mechanism.
[ChangeLog][CMake] Added ability to auto-import non-qml plugins on
CMake builds
Task-number: QTBUG-38913
Task-number: QTBUG-76562
Change-Id: I2d6c8908b521cf6ba1ebbbc33a87cb7ddd9935cf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The sendMouseMove() function calls QTest::mouseMove(),
which again calls QCursor::setPos() to move the cursor.
It then creates and sends a MouseMove event, using
the constructor which picks up the global position
by calling QCursor::pos().
On macOS 10.14, QCursor::setPos() may silently fail
if the user does not grant the application permission
to move the cursor (via a dialog). As result of this
the mouse move event gets an incorrect global position.
Provide the global position directly when creating
the event to make sure it gets the correct value.
Task-number: QTBUG-75786
Change-Id: I3e8df450fea802783a3d1dbe471753f502b42de3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We were loading “Background.png” from the KeyboardSetupAssistant
app bundle. As of macOS 10.14 that image is no longer
there.
Adjust auto tests and document the behavior.
Change-Id: Icb4dd73b3fa88927e87bb86db2bc9f7b4a8094f7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Commit b6ded193 added an unconditional dereference
of the platformScreen pointer, for calls where nativePostion
is non-nullptr.
Change-Id: I4a6fbbd0337f91d4fcb76c17b4dc60e1b9ad10ed
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
As a macro, we can't directly deprecate it, but need to make it call
something deprecated. That is a new ctor with a new enum type
added. The type might be useful for other such ventures, so put it
into qglobal.h
Remove the QT_NO_UNICODE_LITERAL protection, as it's always false
these days, and QT_UNICODE_LITERAL is unconditionally #defined a 20
lines above.
[ChangeLog][QtCore][QStringView] Deprecated the (undocumented)
QStringViewLiteral macro. Just use u"" or QStringView(u"") instead.
Change-Id: I9141320225037e1bc6b7f920bf01a9d0144fdac2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There are two cases:
In a BlockingQueuedConnection, QMetaCallEvent doesn't allocate memory
and instead passes already existing pointers through. A QSemaphore
is used to serialize data access between threads. So the constructor
taking a QSemaphore can be simplified to only accept an existing arg
array.
In a QueuedConnection, QMetaCallEvent needs to make deep copies of
the arguments, and memory needs to be allocated based on the number
of arguments. The previous code put the burden of memory allocation
on the code generating the event, while the memory was free'd by
~QMetaCallEvent. Instead, make it QMetaCallEvent's responsibility
to allocate and free the memory as needed, and adjust the code
generating QMetaCallEvents.
We can allocate the memory for types and pointers to arguments in a
single block, starting with the space for the array of void*, followed
by the space for the array of integers to avoid byte alignment issues.
By pre-allocating the space that's needed by three arguments, we can
avoid all mallocs for the majority of QMetaCallEvents.
Until this change has propagated through qt5.git, we need to keep the
old API that is still used by QtDeclarative around. Once QtDeclarative
has migrated to the new API, it can be removed.
Change-Id: Id7359ffc14897237ea9672dabae9ef199a821907
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If a project has DESTDIR and TARGET set to fixed values, then the
target paths conflict when doing debug_and_release builds.
With this change we're detecting this situation and yield a warning.
Fixes: QTBUG-2736
Change-Id: Ib163db3463322792ab9fa5b997285ac9fc9819ab
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
When I initially added it, it was ony for QCborValue, but I never added
the tests. Turns out there were two bugs:
[ChangeLog][QtCore][QBitArray] Fixed two bugs that caused QBitArrays
created using fromBits() not to compare equal to the equivalent
QBitArray created using other methods if the size was zero or not a
multiple of 4. If the size modulus 8 was 5, 6, or 7, the data was
actually incorrect.
Fixes: QTBUG-77285
Change-Id: Ife213d861bb14c1787e1fffd15b70573d162042c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When calling QTextDocument::clearUndoRedoStacks() with UndoStack,
there were two bugs: The first was that we were retrieving
the item at "undoState" and deleting this. This is actually the
upper limit of the for loop. If the stack does not contain any
redos, then it would be == undoStack.size() and we would assert.
If there were redos, then we would delete the item at undoState
multiple times (actually undoState times).
In addition, when the loop exited, we first removed the dangling
pointers using remove() and then there was a weird resize() to
the new size minus the old undoState.
This would either assert because we tried to resize to a negative
number, or it would arbitrarily remove items from the stack.
[ChangeLog][QtGui][Text] Fixed a crash bug in
QTextDocument::clearUndoRedoStacks(QTextDocument::UndoStack).
Task-number: QTBUG-69546
Change-Id: I8a93e828ec27970763a2756071fa0b01678d2dcd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Don't manage the ref-count yourself, as this requires the code to use
the QAtomic copy ctor, which we want to remove going forward. Using
QSharedData, we can let the compiler write the code for us.
Since 'ref' this way moves to the first spot in the list of effective
members, creating a 4B hole between itself and 'msecs', swap 'status'
and 'msecs' to fill the hole:
offset: 0 8 16 24
| | | |
without v v v v
adj.mnt: |*R*| | msecs | S | U | TZ....
before: | msecs | S | U |*R*| | TZ...
after: |*R*| S | msecs | U | | TZ....
This keeps the padding out of the critical first word, which improves
latency. That said, for accessing the members the old layout surely was
optimal. This layout optimizes copies and pessimizes access to 'msecs'
on 32-bit platforms without the Critical Word First optimization.
Requires adjustments to tst_toolsupport and the qhooks version.
Also default members using NSDMI, consequently drop the manual default
ctor.
Change-Id: I3c48e68694ad29b28a13aa47ea0f283fae52edd7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For symmetry with QSize and QRect and because there were some users in Qt.
Port those users.
[ChangeLog][QtCore][QPoint/QPointF] Added transposed().
Change-Id: If4f23dbcf7d67983a6b1885e0d1d538115b49e2b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amends 2e1763d83a.
The new range ctors need deduction guides, since the compiler can't
deduce the value_type from a pair of iterators.
Change-Id: I3ec1e5f91305b317c443b6a70246be416b55bad9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
some assumptions were incorrect: our test server immediately sends
its SETTINGS frame, as a result we have to reply with client preface +
SETTINGS(ACK). So QVERIFY(!prefaceOK) was wrong from the beginning and
was only passing by pure luck.
Change-Id: Ie43f0d4ac41deb0e5339badaae6149a9b2f9d9b3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Adds setters for transfer-functions and primaries.
This allows us to remove use of private QColorSpace API from the PNG
handler.
Change-Id: Ieeff81c813c253649500acd1e53f35247b872325
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Replace our use of 'gamut' with 'primaries'. One is the axes of the
color space, the other the volume of representable values. For the
currently supported color spaces those are mostly equivalent, but when
we later add support for scRgb, this would be misleading as it has the
same primaries as sRGB but a much wider gamut, and we would like to use
the same primaries/"gamut" id for it.
Also few people would know what "the sRGB gamut" is, but
"the sRGB primaries" is easily googable.
Change-Id: I3348ccaae27a071ec77a4356331b9bbbf92e0d19
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
- Replace the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Build docs for deprecated APIs conditionally, based on deprecation
version. Remove the docs of methods deprecated since 5.0.0, these
methods are not compiled anymore.
- Modify the tests to make them build when deprecated APIs disabled:
* Make the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods
are enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, add tests for the replacement
Task-number: QTBUG-76491
Task-number: QTBUG-76540
Task-number: QTBUG-76541
Change-Id: I6aaf0a1369c479fb880369a38f2b8e1e86b46934
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
One of the tests above was unsetting a variable that enforces
the use of a temporary keychain. We have to set it back, otherwise
the test is failing. What surprises me though - why I had this
problem only locally and not on CI? Apparently, SecureTransport
is not covered by our configurations ...
Change-Id: I0ff1e3e304632869391ed61213c245b949d8c778
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Done-with: Sona Kurazyan <sona.kurazyan@qt.io>
Change-Id: I5b584cbe468429c53c2d661a0d7957d74e7ad691
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Somehow missed these during my first iteration.
Change-Id: Iaef0ab84d9320a98f49ec071c93cd6f2907d92c3
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
For some reason, the overload resolution of the
High DPI scale() functions introduced by
b6ded193ee chose the
wrong overloads for QPointF and/or QPoint; it fell
back to the generic template intended for qreal,
QSize, etc, ignoring the origin. Remove the
template and spell out all overloads.
Fixes: QTBUG-77255
Change-Id: I5661f16f7326f65156f646f430f5a0c71d5302d2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This change removes the leftovers form other cleanup commits.
Task-number: QTBUG-76491
Change-Id: I61440f87c5a280f9666b78e19aac4d8ac603767e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
In two cases, we now detach. ¯\_(ツ)_/¯ This is test code.
Change-Id: I244f5e20dd923281049f38b76366163c16b6498c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The newly introduced clear() method left the path in an undefined
state: d_ptr allocated, but no elements. The elements vector is
otherwise never empty, since ensureData() inserts a dummy initial
moveTo element.
Fix by making sure that clear() leaves the path in the same state as
ensureData() (i.e. "empty" but not "null"), except possibly more
capacity allocated in the elements vector.
Fixes: QTBUG-76534
Change-Id: I7ad8b312913f5eb6e22023f5d2fd873e54b1e23c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Commit 8010e906d3 accidentally ended up
removing the removal-on-undefined-insertion check by calling insertAt
instead of insert, which had it. This patch moves the check back into
setValueAt.
Change-Id: Ic381e284d3da37e31c4eb29f79dfab9c55c2e3e9
Fixes: QTBUG-77204
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead, use (void)x; directly.
The current use of Q_UNUSED(x); generates warnings for an
empty statement the expansion of Q_UNUSED contains a semicolon
already.
Emitting Q_UNUSED(x) without the extra semicolon would be
an option, too, but as the future of Q_UNUSED's embedded
semicolon seems unclear right now, avoid its use altogether.
The change affects only generated code that's barely ever
read by a human, so the overall utility of "improved readability"
of Q_UNUSED in that place is questionable anyway.
Change-Id: I332527ed7c202f779bd82290517837e3ecf09a08
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Id82e103d4076fed63c871385b2b0f21c04735d00
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QApplicationPrivate::focus_widget became a dangling pointer
in the following scenario:
A widget first gets focus and later on gets a focus proxy.
QApplicationPrivate::focus_widget was still pointing to the initial widget.
Upon destruction, QWidget::hasFocus() [which follows to the focus proxy
and then compares with focus_widget] was therefore false for both
widgets. So QWidget::clearFocus() didn't call
QApplicationPrivate::setFocusWidget(0) for either of them. As a
result, focus_widget remained set, and became dangling.
In real life, this happened with a QWebEngineView, which the application
gave focus to upon creation. At that time it doesn't have a focus proxy
yet. That happens later, in QWebEngineViewPrivate::widgetChanged.
https://bugs.kde.org/show_bug.cgi?id=381793
Change-Id: Ifee610bb76a2d4d2797b98ece9bffe5fffe3c6a6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QImage comparison has always ignored differences in
metadata. Introducing colorspace comparison can break backwards
compatibility, as not all image formats or handlers have colorspace
capability.
This partially reverts commit
733ca2230c.
Fixes: QTBUG-77205
Change-Id: I1d525a9727e84502624cd118f503eec7be306c99
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Now that all our supported compilers know char16_t, we no longer need
QStringViewLiteral, whose only purpose in life was to turn u"" into
L"" for MSVC < 2015.
Change-Id: I25a094fe7992d9d5dbeb4a524d9e99e043dcb8ce
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Passes locally, and there is no reason why it shoulnd't. Use IPv6
addresses for Google and Cloudflare DNS servers, and as with the IPv4
tests, rely on Python and (as a fallback) nslookup to produce the
reference.
Change-Id: I584f8ae9bc89c66a1f59d7b1e7493d0ed8033e8a
Fixes: QTBUG-22287
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test instantiated and deleted a model in each test which is
wasteful since not all tests use it. Remove it and introduce per-test
variables instead.
Task-number: QTBUG-76493
Change-Id: I1684ea5b8eac7b52bb99e830f723693c51e8b9a5
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Lookups performed via QHostInfoRunnable must not synchronously call
the user-code's receiver objects, as that would execute user-code in
the wrong thread. Instead, post a metacall event through the event
loop of the receiver object, or the thread that initiated the lookup.
This was done correctly for the trivial cases of empty host name or
cached results, so the code generally existed. By moving it from a
global function into a member function of QHostInfoResult, we can
simply access the required data to construct and post the event.
As we process that posted event, we need to check that the context
object (which is already guarded via QPointer) is still alive, if
we had one in the first place. If we had one, and it's deleted, then
abort.
[ChangeLog][QtNetwork][QHostInfo] Functors used in the lookupHost
overloads are now called correctly in the thread of the context object.
When used without context object, the thread that initiates the lookup
will run the functor, and is required to run an event loop.
Change-Id: I9b38d4f9a23cfc4d9e07bc72de2d2cefe5d0d033
Fixes: QTBUG-76276
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- Use nullptr
- Instantiate test helpers on the stack or use QScopedPointer
- Remove C-style casts of enumerations/flags, use meta types
- Port to Qt 5 connection syntax
- Fix static method invocation
- Use initializer lists for QStringList
- Introduce a logging category for all debug output
- Streamline code
- Refactor cleanup() to operate on QFileInfoList which is faster
and streamline
- Remove unused variables
Task-number: QTBUG-76493
Change-Id: I3a033af7c9ec4dac3149d2016104daad07797a4f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
QNetworkAccessManager::connectToHostEncrypted()/connectToHost()
creates 'fake' requests with pseudo-schemes 'preconnect-https'/
'preconnect-http'. QHttp2ProtocolHandler should handle this
requests in a special way - reporting them immediately as
finished (so that QNAM emits finished as it does in case of
HTTP/1.1) and not trying to send anything.
We also have to properly cache the connection - 'https' or
'http' scheme is too generic - it allows (unfortunately)
mixing H2/HTTP/1.1 in a single connection in case an attribute
was missing on a request, which is wrong.
h2c is more complicated, since it needs a real request
to negotiate the protocol switch to H2, with the current
QNetworkHttpConnection(Channel)'s design it's not possible
without large changes (aka regressions and new bugs introduced).
Auto-test extended.
Fixes: QTBUG-77082
Change-Id: I03467673a620c89784c2d36521020dc9d08aced7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Take color space into account when comparing images, and fix gamma
comparison that was trying to be too accurate.
Change-Id: I3674653abb21b66aaacb557addc4afb4ee75cfdd
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Deprecated APIs of sql lib are used only in tests. This change
makes sure, that the tests build and pass with those deprecated APIs
removed or disabled, by:
- Making the parts of the tests testing the deprecated APIs to be
compiled conditionally, only when the corresponding methods are
enabled.
- If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76541
Change-Id: I93ed6ff92c7aa7af2c106b1a9d92d3704c7d9105
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Deprecated APIs of network lib are used only in tests. This change
makes sure, that the tests build and pass with those deprecated APIs
removed or disabled, by:
- Making the parts of the tests testing the deprecated APIs to be
compiled conditionally, only when the corresponding methods are
enabled.
- If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76541
Change-Id: I78c4913155007fd1d0df2c38e1b9a8b80066adeb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Also optimized the existing QL1S overload of non-const operator[](), and
applied Extract Method refactoring to the other existing QL1S overloads.
[ChangeLog][QtCore][QJsonObject] Added insert(), remove(), and take()
overloads taking QLatin1String.
Change-Id: I5e737cf2d7d9ffb325d6981db1e4a6a9f093657b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
[ChangeLog][QtCore][JSON] Added overloads of functions taking key
strings as QStringView; in QJsonObject, QJsonValue and QJsonDocument.
Change-Id: I78b40aba8200003acfae257ff06f5f15737005e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
When successfully finishing a parse, it's reasonable to expect that the
QIODevice was advanced to the end of the input data.
[ChangeLog][QtCore][QCborStreamReader] Fixed a bug that caused the
QIODevice that the data was being read from not to show the entire CBOR
message as consumed. This allows the user to consume data that may
follow the CBOR payload.
Fixes: QTBUG-77076
Change-Id: I1024ee42da0c4323953afffd15b23f5d8fcc6f50
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
If QImageReader recognized the suffix of a file, it would by default
not check if the file contents matched the claimed format. Hence, a
valid but misnamed image file would fail to load.
Fix by adding contents check for suffix-recognized files.
[ChangeLog][QtGui][Image] Loading of image files having a file name
suffix for a different image file type has been fixed. QImageReader
will now ask the suffix format handler to confirm the file contents
(canRead()), and fall back to normal file content recognition on
failure. This implies a slight behavior change in
QImageReader::loopCount(), ::imageCount() and ::nextImageDelay(): For
an unreadable file with a recognized suffix, they would earlier return
0, while they now will return -1, i.e. error as per the documentation.
Fixes: QTBUG-42540
Fixes: QTBUG-68787
Change-Id: I205e83f29ed7190cbcae95dab960232544d012f6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
warning C4573: the usage of 'tst_QNetworkReply::connect' requires the
compiler to capture 'this' but the current default capture mode does not
allow it
Change-Id: Ic9fd526fedf7c52e53e2b1136834c10bf4cd0ea9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It's not implemented
Change-Id: I56abb0a5fe0e6d5c2f5f678adadafed395456902
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
1. Use per-case QNAM objects
2. In a slots (connected to QNetworkReplies) - if an error detected - stop
the event loop (no reason to continue waiting) and then do normal
QVERIFY/QCOMPARE things.
3. In tests, check QTest::currentTestFailed after the event loop returned -
if an error was detected by a slot, no need to continue with QCOMPARE/QVERIFY
in the test itself.
Task-number: QTBUG-77053
Change-Id: I3827a629a2749becd3dc6eee7fd6994d96441e65
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Applications might receive paths with Windows' '\\?\' markers, which
indicates a long path to Win32 APIs, when the application is opened by
explorer via file association. Qt not ignoring those markers will fail
to open such files.
By stripping the marker in QDir::fromNativeSeparators, QFile, QFileInfo
etc automatically are able to handle such paths. QDir::cleanPath is
also documented to normalize separators, so it needs to be done there
as well.
[ChangeLog][QtCore][QDir] Remove Windows specific long path markers
when handling file paths with native separators.
Change-Id: I526a890614edee8c85b39fc12c98e7ddb6e0d793
Fixes: QTBUG-75117
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Current codebases assume isCompressed() implies ZlibCompression, since
there was no compressionAlgorithm() getter. In order to force codebases
to change, deprecate isCompressed() and force handling of the algorithm.
The replacement API is being introduced in 5.14, which is why the
warning is being emitted in 5.15 only.
Change-Id: Ief874765cd7b43798de3fffd15a9f5d978951ea5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Windows has a problem relating to cross-DLL variable relocations: they
are not supported. Since QMetaObject's link to the parent class is done
via a pointer, every QMetaObject in a DLL or in the EXE that derives
from a class from another DLL (such as QObject) will be dynamically
initialized.
This commit changes the meta object pointers in QMetaObject::d from raw
pointers to a wrapper class SuperData, which is almost entirely source-
compatible with the pointer itself. On all systems except for Windows
with Qt 6, it's binary compatible with the current implementation.
But for Windows with Qt 6, this commit will store both the raw pointer
and a pointer to a function that returns the QMetaObject, with one of
them non-null only. For all meta objects constructed by moc, we store
the function pointer, which allows the staticMetaObject to be statically
intialized. For dynamic meta objects (QMetaObjectBuilder, QtDBus, QtQml,
ActiveQt), we'll store the actual raw pointer.
[ChangeLog][QtCore][QMetaObject] Some internal members of the
QMetaObject class have changed types. Those members are not public API
and thus should not cause source incompatibilities.
The macro QT_NO_DATA_RELOCATION existed in Qt 4 but was called
Q_NO_DATA_RELOCATION and only applied to Symbian. It was removed in
commit 24a72c4efa ("qglobal: Remove
symbian specific features").
Task-number: QTBUG-38876
Fixes: QTBUG-69963
Change-Id: Id92f4a61915b49ddaee6fffd14ae1cf615525e92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Caused by commit 01301b0b34, which made
vector.resize(vector.size()) not to detach, which was used by fill() and
assumed that detaching happened. The test does not test the resize()
behavior, only that fill() is not broken anymore.
[ChangeLog][QtCore][QVector] Fixed a regression that caused fill() not
to detach, corrupting shared copies.
Fixes: QTBUG-77058
Change-Id: I6aed4df6a12e43c3ac8efffd15b1b527a8007bf3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
fix the bloody test for good - the idea to have a shared QNAM (shared
by test cases in this test) was somewhat wrong to start with.
Fixes: QTBUG-77053
Change-Id: I5755e96ec988e2dd546f527f3f902fc43914b0b7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As in QVarLengthArray (c34242c679), this will
probably bite someone someday, so fix it before there's a bug report.
Use ctor delegation to keep code size increase small.
There's also the benefit that default-constructing a QNetworkRequest now
no longer creates an expensive QUrl object just to destroy it unused again.
Add an auto-test.
Change-Id: I5ceb5402ca3946048d695244d1b1c36564a1e80a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Don't call realloc() with all its machinery when we know exactly what
to do: destroy the last element and decrease the size by one.
Extend the test, removing the unused Foo class for a new Tracker one.
Change-Id: I568eef4f6335669689fb16fd23af92cb4d6464bd
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
- Replaced the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Change-Id: Ic38245015377fc0c8127eb5458c184ffd4b450f1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The public QWidget::create still has them, but we don't need to
propagate them on - that just makes debugging the window creation
flow harder.
The window argument to QWidget::create is technically used to
guard an early exit in the function, but to keep behavior the
same we leave it for now.
Change-Id: Ic0287575aa25f1272e216adc1b75e34d6f55f6d9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In Qt 5.0, delta() and orientation() were already marked obsolete,
but Widgets and tests have kept on depending on them all this time.
We now start using alternative API so they can really be deprecated.
All constructors except the newest one are also deprecated.
The plan is for all events from pointing devices to have
QPointF position() and globalPosition(), so we deprecate
the other position accessors.
[ChangeLog][QtGui] Obsolete constructors and accessors in QWheelEvent
now have proper deprecation macros. What is left is intended to be
compatible with planned changes in Qt 6.
Change-Id: I26250dc90922b60a6ed20d7f65f38019da3e139e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QLinkedList is still used in several tests. Add exceptions for
these subdirs.
Change-Id: I50ccd2a0892129d4a47aa4e2400211690da9a82d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Conflicts:
configure.pri
Also required s/solid\.color/solidColor/ in a couple of places in:
src/gui/painting/qpaintengine_raster.cpp
Change-Id: I29937f63e9779deb6dac7ae77e2948d06ebc0319
There's like three pages of this when compiling the test :)
Change-Id: I923f2c4f5eff7c709977026666cc5b2a2cbfaa72
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The call to QFileDevice::unsetError() in QSaveFile::open() does
not clear QSaveFilePrivate::writeError. Clear it in addition.
Fixes: QTBUG-77007
Change-Id: I5e5009750f1726d1c74c1b4eb1c33f3a5393fe4f
Reviewed-by: David Faure <david.faure@kdab.com>
The previous code handled only some error codes, in a very inefficient
way, for some code paths. This change standardizes error handling using
a helper function that maps winsock WSAE* codes to Qt error codes.
The test for connecting to unreachable hosts or ports is now more
generic, and enabled on Windows, where it passes in local tests,
but dependency on network configuration still makes it fragile,
so ignoring some failures without completely skipping the test.
[ChangeLog][Network][Windows] Correctly emit errors when trying to
reach unreachable hosts or services
Change-Id: Icaca3e6fef88621d683f6d6fa3016212847de4ea
Fixes: QTBUG-42567
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Counting absolute paint events is fragile, as there are no guarantees
that a single call to QApp::processEvents only delivers a single paint
event to a widget. As of QTBUG-76566, we see that the items occasionally
receive three calls to paint, which can be simulated by activating other
windows while the test is running and waiting for events to be
processed.
Instead, verify that we do receive any paint events as the first test,
and then verify increments when we expect updates.
This also reverts change 24b9424adc.
Change-Id: Ib51853e918f31acd3aea10d4109c95f34012a29f
Fixes: QTBUG-76566
Reviewed-by: Dimitrios Apostolou <dimitrios.apostolou@qt.io>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The QTest::mouseMove calls are not reliable, and seem to produce
flakiness, at least on WinRT. Removing them, and only depending on
handling of the synchronously delivered QMouseEVent for simulated
mouse moves.
Also, initialize the expected cursor shape from an empty scene;
this avoids that showing the view with the cursor accidentially
on an item results in the wrong default shape. Remove hard
coded coordinates, just test what we know.
Fixes: QTBUG-73545
Change-Id: I6f81d6b16bb613ec77aaa776d6a80aac739aeb58
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When accidentally running a test doing screen-grabbing
with High DPI scaling active, sizes of the obtained pixmaps
can differ due to the device pixel ratio. Add a check to make that
clearer.
[ChangeLog][QtTestLib] Comparison of QImage, QPixmap now checks for the
device pixel ratio.
Change-Id: Id8d5187e99c565c44a7bfb8b9cfb09737815fb15
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As with widgets, items that are disabled should not receive any input
events.
Similar to QGraphicsScene, which ignores disabled items when handling
mouse presses, the view should also ignore them when handling mouse
moves to update the cursor.
Since QGraphicsView only adjusts the cursors on mouse moves, reenabling
an item that is currently under the mouse will not change the cursor.
This is consistent with other changes of item attributes that would
position the item under the mouse (such as moving it). The overhead of
hit-testing items for every such attribute change would be too large,
and applications can generate a mouse move event if they really need
to adjust the cursor in all situations.
[ChangeLog][QtWidgets][QGraphicsView] Ignore disabled items when setting
the mouse cursor.
Fixes: QTBUG-76765
Change-Id: Ifcd31fc0581e8421e58eeb436a55b031909eed7e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The tests send QEvent::MouseMove events to the view, but don't fully
construct the event with both local and global position. Consequently,
QMouseEvent will use QCursor::pos as the global position, which is
unreliable, as QTest::mouseMove can not guarantee that the mouse really
moves - when running the tests locally on e.g macOS, it never does.
So instead construct the QMouseEvent with the trivially calculated
global position.
Change-Id: Ic4c914e3af7f15751545080d4743b06d3887cce8
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QNetworkSession has a concept of UsagePolicy which can disable
background* transfers to conserve battery or bandwidth. However, it is
only possible to change the policy through
QNetworkSessionPrivate::setUsagePolicy which currently doesn't have any
callers outside of our auto tests.
*background = transfers not initiated directly by the user, but needs
to be marked as such by the application developer.
Change-Id: I92c4abccaca040612b4795abe7c52d68a2d21749
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
That's how CommonMark specifies it. The HTML codec-guessing algorithm
was making it fall back to Latin1 in practice, which was screwing up
any Unicode characters found in the markdown source.
Change-Id: I4021adc4a68591ecfd56ef24971af53ce3e9c96d
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Some compilers (hello, MSVC) do not produce literal types in Qt
because their constexpr support has been blacklisted.
Therefore, amend the check for literal types in Q_ARRAY_LITERAL:
only do the check if the compiler supports constexpr.
Change-Id: I7cffe00dde447d975aa6a7d02248df9c351508ff
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
In all of these cases, the effect of the change is local to one file.
Change-Id: I3bda3aadee3b42e7797183c2330183390b92d1f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the recursive mutex use case out of QMutex into a separate class,
unsurprisingly called QRecursiveMutex. As an immediate benefit, 90% of
the QMutex users now enjoy a constexpr QMutex ctor.
This change prepares for a real split in Qt 6, so that both use-cases
are no longer bundled up in one class.
[ChangeLog][QtCore][QMutex] Added QRecursiveMutex as a replacement of
QMutex(QMutex::Recursive).
Change-Id: I79b8724e8a8ee65e4bd0f06acd76103fe4197b8c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When I added the QEXPECT_FAIL the http proxy was the only one.
That's no longer true after fixing the SOCKS proxy, so let's make the
condition more specific.
Change-Id: I1eaa5117d5d0219e04cbd091ec54e522fe7b5509
Reviewed-by: Dimitrios Apostolou <dimitrios.apostolou@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Replaced QOperatingSystemVersion::WindowsVersion,
QSysInfo::windowsVersion(), QSysInfo::macVersion(),
QSysInfo::MacintoshVersion with QOperatingSystemVersion::current().
- Added QOperatingSystemVersion::WindowsVista for convenience, as it
is used in lots of places.
Change-Id: If9c4ac496005b2e70b5c70be160747afa74b98c1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Replaced the usages of deprecated APIs of corelib by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76491
Task-number: QTBUG-76539
Task-number: QTBUG-76541
Change-Id: I62ed4a5b530a965ec3f6502c6480808f938921aa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... except for tests, which manually undefine the macro.
Like QT_NO_FOREACH, this is a technical way to keep JSI-free
modules JSI-free going forward.
Change-Id: Icf1342da00a700f42f9e32a253d1cdb94c38dd7e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This seems to be a common use case, and to be expected from pastes
of MSWord documents.
Change-Id: I5849d7f51408e76f15a0b03c2118649f118af1d6
Fixes: QTBUG-66794
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This reverts commit 9a25d27b9d58316dee5d2305135d2d74ad5d51e7.
The QSKIP is no longer needed as the imap server's certificate
was updated
Task-number: QTBUG-76610
Change-Id: I1007ce50d6f7f6258fdeb8894c66678a660b03ca
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We stopped storing the patch release number of Qt in the plugin metadata
in commit 7bd79b3cff (5.13), to make it
simpler to parse the validity of plugins before decoding the CBOR
payload.
Fixes: QTBUG-76855
Change-Id: I6aed4df6a12e43c3ac8efffd15adbbf83e928866
Reviewed-by: Liang Qi <liang.qi@qt.io>
RenderHint::HighQualityAntialiasing and NonCosmeticDefaultPen are
obsolete since Qt5 but not marked as such. Therefore add
Q_DECL_ENUMERATOR_DEPRECATED_X now so those two enumerations can be
removed with Qt6.
[ChangeLog][QtGui][QPainter] HighQualityAntialiasing and
NonCosmeticDefaultPen are marked as deprecated and don't have an effect
anymore
Change-Id: Ib0c966a078a1d23d492d0255288e2066c50e87b6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Remove the mainW, edit widget member variables from the test and use
widgets instantiated on the stack in the tests.
For the data-driven tests, use a static QScopedPointer, which is
reset by a newly introduced TestEnd action.
The book-keeping logic maintaining a list of shortcuts can then be
removed.
The setupShortcut() helpers are simplified and the special case
TestWidget::SendKeyEvent is replaced by a lambda in
keypressConsumption().
Task-number: QTBUG-76493
Change-Id: I15dfa86dfa0666ed8288b7190e37cdb862c261c8
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This is the most flaky-pass test currently.
It fails the first time it is run on MacOS_10_12, but
succeeds all the following times.
This happens extremely often, so disable it until the issue
is resolved.
Task-number: QTBUG-76566
Change-Id: I94359eceb91c3b958930424e6c8b5957fb3f1252
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QWidgetPrivate::updateIsTranslucent sets the surface format of the
window with the alpha based on the translucency attribute, so we need
to call this function when the attribute value changes. The test can
confirm that the window's requested surface format has changed, we
can't rely on what is actually set, and don't have to rely on
hard-coded values like 8bit alpha.
While WA_NoSystemBackground needs to be set for WA_TranslucentBackground
to have an effect, we can't clear the attribute when clearing
translucency (as it might have been set explicitly).
Change-Id: I238d6930b7e0488397467a4e035b5f530566a1ff
Fixes: QTBUG-60822
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When calling waitFor{ReadyRead,Disconnected} it will wait for data but
if the data is already received and the read notification has been
queued (and there's no more data coming in) it will return false.
By checking if a read notification has been queued and then handling
this we can easily take care of this scenario.
Fixes some flaky tests which missed the read data in waitForDisconnect
and similar.
Fixes: QTBUG-38385
Change-Id: Ic05d59883c1175783e56ff1822b6636c35aec874
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Use nullptr
- Fix static method invocations
- Use QString() instead of QString("")
- Use override
- Use member initialization
- Remove unimplemented code related to status bars
- Use Qt 5 connection syntax
- Fix apparent oversights in ambiguousItems() and
unicodeCompare(),where the 2nd shortcut was assigned to the wrong button
- Use Q_ENUM for the enumerations which will output the value in
QCOMPARE and automatically declare them to be a metatype
- Use enums in helper function signature for clarity
Task-number: QTBUG-76493
Change-Id: I0ed6ee7ee8dc2dbb48160a8383e6ed29164c3449
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
- Replaced the usages of:
* QDateTime::toTime_t() -> QDateTime::toSecsSinceEpoch().
* QDateTime::fromTime_t() -> QDateTime::fromSecsSinceEpoch().
* QDate::shortDayName() -> QLocale::system().dayName().
* QTime by QElapsedTimer, where the deprecated methods of QTime
were used.
- Modified the tests for the deprecated methods to be enabled only
when the corresponding methods are enabled: when the deprecated
APIs are disabled, the tests will be also disabled, and the
compilation won't be broken.
Task-number: QTBUG-76491
Change-Id: I4d565db2329e580c567aae511696eb1efe120843
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Otherwise "QVarLengthArray<Foo> x = {};" gives a warning. Also, some
compilers get confused about "QVarLengthArray()" this way.
Task-number: QTBUG-76199
Change-Id: I4296586c0181d3e6e82ca8b7b79aeb9a21645d1f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
As planned when adding YearRange: now that it's merged up to dev, move
it to QDateTime, since we can add to the API at 5.14.0.
This follows up on commit 82ad4be4a2.
Change-Id: I81b6c2331121a71e2592514781c02c5756e70c52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QStringList] Added QStringView overloads of join(),
filter(), and replaceInStrings().
Change-Id: I9636e21e2e43ed46cce0aa7fa23ab0710aa641ba
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
... and schedule it for removal in Qt 6.
This appears to have come to some fame on the internet, so better add
a deprecation warning before we remove it in Qt 6.
Change-Id: I42d91d933f47dfd2d8d54c92358e9e46ced6bf21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The -d option makes rcc output a dependency file with the specified
file name.
The resulting dependency file is useful for make or ninja based build
systems.
[ChangeLog][Tools][rcc] Added -d option to generate a dependency file.
Fixes: QTBUG-45460
Change-Id: I495ade50f8d9865d4c00dce9373b2b6d1a6c8f2f
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
A recurring problem with the Q_NAMESPACE macro is that it declares
an object (staticMetaObject) in the surrounding namespace. That
object lacks any export/import qualification to make it usable
with shared libraries.
Introduce therefore another macro to work around this issue, allowing
the user to prefix the object with an exporting macro, f.i. like this:
Q_NAMESPACE_EXPORT(Q_CORE_EXPORT)
The old macro can simply then be rewritten in terms of this new one,
supplying an empty export macro.
Note that NOT passing an argument to a macro expecting one is well
defined behavior in C99 -- the macro will expand an empty token.
Of course, MSVC doesn't like this and emits warnings. As a
workaround, use a variadic macro.
[ChangeLog][QtCore] Added the new Q_NAMESPACE_EXPORT macro. It
can be used just like Q_NAMESPACE to add meta-object information
to a namespace; however it also supports exporting of such
information from shared libraries.
[ChangeLog][Potentially Source-Incompatible Changes] Prefixing
Q_NAMESPACE with an export macro may no longer work. Use the new
Q_NAMESPACE_EXPORT macro for that use case.
Fixes: QTBUG-68014
Change-Id: Ib044a555ace1f77ae8e0244d824ec473550f3d8e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Fix warnings:
Using QCharRef with an index pointing outside the valid range of a QString. The corresponding behavior is deprecated, and will be changed in a future version of Qt.
introduced by qtbase/c2d2757bccc68e1b981df059786c2e76f2969530 (5.14).
Change-Id: Ie6f0e2e3bb198a95dd40e7416adc8ffb29f3b2ba
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is usually the case on Android, where running this test would
require deployment of files to the emulator. This doesn't give us any
further testing that we don't already do by running this test on regular
Linux, so skipping the test instead if the preconditions aren't met.
Change-Id: I3722796634871213ba51c89ae7f40b19f954f2cb
Fixes: QTBUG-73566
Reviewed-by: Daniel Smith <Daniel.Smith@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Fix our generation of font-family CSS so it contains the full list of
families.
Change-Id: I37d5efa64faeb4b6aeb7e2c5d6a54ff07febe9cc
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The completer popup has focus, making QShortcut direct to it's window
rather than to the window the completer belongs to. As QShortcut handles
the case for Tool windows that have a parent, but doens't do the same
for popups. And they shouldn't be treated the same way, as a context
menu popup for a e.g. text edit should in fact block the text edit's
shortcuts while open.
However, the completer popup is special, in that it explicitly makes the
widget completes for its focusProxy, which is what we can use to fix
this issue.
Change-Id: Ie7177d39668b3af14a1d9e0ee5d93eca9c67c8af
Fixes: QTBUG-4485
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Function did not handle default-constructed (null d_ptr) path correctly.
Fixes: QTBUG-76516
Change-Id: I2925d4306f7fce34ece6739b18a8e275e7970837
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
It is sufficient to run this test on systems where we don't need to
set up dependencies and satisfy other assumptions the test makes. It is
safe to assume that if this test passes on regular Unix, then
QTemporaryFile will behave as expected on Android as well.
Change-Id: Iaf9a67d7c12b3acfd0992bab591c3f906b073d9e
Fixes: QTBUG-73564
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
81e298a51d fixed a case where the focus
chain was screwed up when the order was already correct. This worked
correctly in most cases but not when the next focus widget of the first
one had Qt::NoFocus.
The optimization check if lastFocusChildOfFirst is the same as second is
thrown away since it now does not longer screw up the focus chain and
the save would only be four pointer assignments.
Fixes: QTBUG-75388
Task-number: QTBUG-10907
Task-number: QTBUG-68393
Task-number: QTBUG-69619
Change-Id: I581ed532156c34ea970123afd063194aab016304
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QSslSocket (OpenSSL backend) does not use mutex/locks during
a handshake, so we re-enable previously skipped tests.
This reverts commit 8c87a1402c.
Change-Id: I994b085f016f0eb18b3ba439a7041ea08cd3577b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is the worst fix ever, adding one more qWait. The test has been
updated in the 5.13 branch, so there a different fix will be needed. For
now this is in line with the rest of the code.
This test is currently one of the worst offenders when it comes to flaky
tests.
Task-number: QTBUG-64639
Change-Id: Ia1e71cc948997408b9658839013c9ad098111033
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This version of arg(), unlike its QString counterpart, transparently accepts
views without conversion to QString, and is also extensible to further argument
types, say a future QFormattedNumber.
[ChangeLog][QtCore][QStringView/QLatin1String] Added arg(), taking arbitrarily
many strings.
Change-Id: If40ef3c445f63383e32573f3f515fdda84c7fe3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that it's trying to guess whether the type is markdown based on
the file extension, there needs to be a way to override it. For example
it might be arranged that directory listings will be generated in
markdown format instead of HTML; then when loading a source URL that
is a directory, the application may override the type. The type for
the single-argument setSource(url) is UnknownResource to preserve
the existing behavior, but the user can override the guessing by
setting a specific type.
Change-Id: Id111efd24de7d8fd18c47b16a2d58f5b09d77891
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
When using a texture for foreground color in text and copy-pasting
the text inside the same QTextEdit, the formatting would disappear.
Fixing this in a general way would require implementing some
other carrier format in the mime data than HTML, such as e.g ODF,
but it can quite easily be fixed for the case where the data
is pasted in the same document, or even different documents
as long as they have a reference to the image in the formats.
[ChangeLog][QtWidgets][QTextEdit] Added support for copy-pasting
foreground brushes with textures within same document.
Task-number: QTBUG-75931
Change-Id: I8b39dce289c64eea39e25cb8eb207e2534bcd2eb
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Semi-automated, just needed ~20 manual fixes:
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)load\(\)/$1loadRelaxed\(\)/g' -i \{\} +
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)store\(/$1storeRelaxed\(/g' -i \{\} +
It can be easily improved (e.g. for store check that there are no commas
after the opening parens). The most common offender is QLibrary::load,
and some code using std::atomic directly.
Change-Id: I07c38a3c8ed32c924ef4999e85c7e45cf48f0f6c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ifea720470541000481fbacc510b4cb589c9990d9
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ibdd3f63d9069c3f01dfe8431bcc64bde4f2aa569
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ifa62ad002689a0be6ed1a88ad4ac0e92082ef616
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: I2e1b42c09db88da64ec62aee7906f4c368e5bcbb
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: I23bc9693fb9f553fd63d10687d51322394717ed7
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: I949479066e114af0af85b6e62d90fd56b9c80077
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There's no use of QRegExp here therefore remove the include
Task-number: QTBUG-72587
Change-Id: If281c34d202c9fae4e548c8293443cc0dc283de0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: I18fb17dd2f5f7c70b5c6564b876fc2138c430176
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Iff9d4be685bf360ad921e29a82cb878ae5c46180
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: If5d5a9d1c3f094d554110ada3b259f4d863e7121
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: I60ffa6df83aaf520730cfbb1dd3f18a2d2e19977
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The check to disable the test was the one for QRegExp. This patch fixes
that.
Change-Id: I8783f582998cdd6ffe5dc5dafb3d53d56cd91213
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ibbd161700bf9e75736652b99dfa1ffd47e584249
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ie89641601763ff41eee5356a4b5ddee7ef810fbc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This patch adds the missing tests for the QRegularExpression class to
the QDataStream tests. Only QRegExp was tested until now.
Task-number: QTBUG-72587
Change-Id: I68ad1500ecbb041bbc6fbdff04b99171530cc0fd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not removing QT_EMULATED_ALIGNOF logic from qglobal.h at this point, as
it might be used elsewhere.
Change-Id: Ie78922bb604a54aed03ab5b88e31a7f29a3a4de0
Fixes: QTBUG-73561
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without this, a local build of this test on macOS fails.
Change-Id: Ie03fa47ff0a54db752af47f223fbe5724cd9c976
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code made two incorrect assumptions: that the strings used are "AM"
or "PM", or would be translated. Instead, the locale provides the
correct strings, and there is no need to translate. However, in order
not to break existing translations, we give those preference.
And that the AM/PM string is not longer than 4 characters, while in
e.g Spanish/Columbia locale the strings are "A. M." and "P. M.", ie 5
characters long. Also, the use of qMin in a function that is asked to
provide the maximum section length is wrong.
[ChangeLog][QWidgets][QDateTimeEdit] Use the information provided by
the locale to determine the AM/PM strings, unless they are already
translated.
Change-Id: I6d1b05376e5ac62fc58da2cdea2e6cb732ec6747
Fixes: QTBUG-72833
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In this threaded setup the server can sometimes have the data before it
calls "waitForReadyRead", what happens then is that we fail the wait and
as a result the test fails overall.
Let's check if we actually got some data after all and then continue if
we did. Since both the client and the server currently wait the same
amount of time (2s) the max timeout for the client was increased by
0.5s so it has some time to notice that the server got the message.
Change-Id: Ib5915958853413047aa5a7574712585bcae28f79
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit e79b1dcdf5)
Reviewed-by: Simo Fält <simo.falt@qt.io>
(cherry picked from commit d53b8b77bc)
Change-Id: I2f6ffb8e0a9b4d591edb6925e48baffcefc14511
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If this callback is not set then OpenSSL will call the callback
used for <= TLS 1.2 unconditionally when connecting. If using PSK it
will call it again later once the preshared key is needed.
We don't currently handle the TLSv1.3 PSK, but we definitely should.
But for now we can work around it - when psk_use_session_callback is
called we simply change the PSK callback to a dummy function whose only
purpose is to restore the old callback.
This is mostly done to keep behavior the same as it is now for users
(and to keep our tests running).
Later we can add a new signal and handle this new feature properly.
Reviewed-by: Simo Fält <simo.falt@qt.io>
(cherry picked from commit d8efc8d718)
Task-number: QTBUG-67463
Change-Id: I4aca4ae73ec4be7c4f82a85e8864de103f35a834
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We use global object to store errors found by q_X509Callback.
Thus, we also use a lock/mutex. It would appear all tests
involving in-process server and QNAM are prone to intermittent
failures on our Windows VMs - it's always about timeouts due
to the client socket (QNAM) locking and the server socket blocking
main thread while trying to acquire the same lock.
The real fix is to re-write our verification callback so that
it does not need locking/does not block the main and 'http'
threads as a result. But such change is too dangerous for
5.13.0 so we instead have a somewhat handicapped/reduced
test on Windows.
The fixed QSSlSocket will go into 5.13.
Task-number: QTBUG-76157
Change-Id: Ia54701bcb3f6f079a69e52c8904ac3efcee4a787
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][QtCore][QTextBoundaryFinder] Sentence breaking now
no longer breaks between uppercase letters and comma.
This is a deviation from the Unicode specification,
but produces less surprising behavior.
Fixes: QTBUG-75857
Change-Id: If1e78b3be3f20250d01100353ea7da6110985f82
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
QT_DEPRECATED_X() was not added with
d6d33f0b80 for the deprecated
QComboBox functions - Add them now.
Change-Id: I8d4ea08766ae6ff052dfccac6c3f35ecf34affb7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- Never for global inputs
- Otherwise only if the temporary is referenced more than once
-> meaning it's actually caching the result of some operation
Tests updated accordingly.
Change-Id: Ic76615370d23dee3965ca6350d5257a8be5a3e22
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The file system appears to cache too aggressively, so if the reported
storage size doesn't change after flushing to disk, ignore the failure.
Change-Id: Iba7dce79591447fac296bfe92c2dc993d36d0c2a
Fixes: QTBUG-69868
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Don't go into an infinite loop breaking pages, when an image is about
as large as the page. Correctly take top and bottom margins into account
when calculating whether the image could fit on one page.
Amends change 416b4cf685.
Fixes: QTBUG-73730
Change-Id: Id311ddf05510be3b1d131702f4e17025a9861e58
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
...and other slight modernizations and minor fixes.
Change-Id: Ide587d9fe59ca9113ae775882c99a50debaf9000
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The full stroker does not produce good results for aliased lines
thinner than 1 pixel. Avoid it by making sure that such thin lines
are painted by the cosmetic stroker, even when they have
non-uniform transformation.
Fixes: QTBUG-73866
Change-Id: I7b5f0fa555903246e0c3fd92cd435cc8c0b15a24
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QDateTime's short names setUtcOffset() and utcOffset() have been
deprecated since 5.2, in favor of setOffsetFromUtc() and
offsetFromUtc().
QDate's shortDayName() and shortMOnthName() have been deprecated since
5.10, in favor of QLocale's dayName() and monthName(). Also, the
tests that were using them are testing methods only present when the
datestring feature is enabled; so condition them on that feature.
Change-Id: Ibfd4b132523ca8fbc1cb163353a44e0500877fd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a regression introduced by 63967313f5 which blocked signals
on the view, but not on the model.
Change-Id: Ib2f93fe6ef842264aaba200c98ee4a19065ca220
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Laurent Montel <laurent.montel@kdab.com>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
If columns are removed and we get notified via layoutChanged, the code
tries to restore old section sizes, and went out of bounds, leading to
an assert in QVector. Simply add an if() to skip restoring out-of-bounds columns.
This comes from https://bugs.kde.org/show_bug.cgi?id=395181,
which translates into the unittest that is part of this commit.
Change-Id: Ide42176a758f87b21957c40508127d67f1d5a2d9
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
[ChangeLog][QtCore][QMetaObject] Non-copyable lambdas can now be used
with invokeMethod(). For consistency reasons, the functor object is
now always moved.
Fixes: QTBUG-69683
Change-Id: I66ff5e21d6d1926f0f7c5f8c304bed1a90b69917
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When re-parenting, some widgets change their children. For example
QLabel, when set to rich text, will not update, until receiving a polish
call, at which time getting a list of all children recursively and then
trying to call functions on them will crash, since the children change
in the middle of this operation.
Fixes: QTBUG-69204
Fixes: QTBUG-74667
Change-Id: I95dd83ebeed14c017e22552ddd47658ae8a09353
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
If the start position of a backward string search was the at the start
of a paragraph, the code would start searching at an illegal position
(at the eol character) in the preceding paragraph. That caused
that whole paragraph to be skipped, so any matches there
would not be found. Fix by making sure the search starts at legal
position.
Fixes: QTBUG-48035
Change-Id: Id6c0159b6613ec75ec617a0a57096ceef2b4cbd0
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
- Use nullptr
- Fix warning about inconsistent parameter naming in CsvCompleter::pathFromIndex()
- Fix C-style casts
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Use initializer lists
- Fix the class declarations, use override, member initializations
- Remove goto, streamline code
- Use auto to avoid repeating the type
- Introduce std::unique_ptr
Task-number: QTBUG-38014
Change-Id: Ia8ecd799064d630648b385b606848d7474c51363
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This is needed for cases where we use e.g. "file:///test.html?query#Fragment".
The fragment and query were already preserved for the qrc scheme. This
fixes it for the file scheme.
Change-Id: I5713e4a25372fdd55ac255b1c6228b4dea419244
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Use the comparison helpers to do fuzzy checking of geometries.
Change-Id: I00f4403f3bca2e8a3996e938a85ba799e083058c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We use global object to store errors found by q_X509Callback.
Thus, we also use a lock/mutex. It would appear all tests
involving in-process server and QNAM are prone to intermittent
failures on our Windows VMs - it's always about timeouts due
to the client socket (QNAM) locking and the server socket blocking
main thread while trying to acquire the same lock.
The real fix is to get rid of global variable/locking, we'll
have it later (quite a change and requires a lot of accuracy).
Task-number: QTBUG-76247
Change-Id: Iffc90d9e16783f17f62e836e01c35f22681bdd39
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Use QTRY_COMPARE to fix recent fails like
FAIL! : tst_QGraphicsView::cursor2() Compared values are not the same
Actual (view.viewport()->cursor().shape()): IBeamCursor
Expected (Qt::SizeAllCursor) : SizeAllCursor
Task-number: QTBUG-76259
Change-Id: Ie9d4bbe45a3be6064ec88ee237360beb92a61481
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
It's really failing only on Windows 10 it seems.
Task-number: QTBUG-76259
Change-Id: Ieb541dc994a17e82478a5cc2643e0a89fd5aa97d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Liang Qi <liang.qi@qt.io>
NoDefaultConstructorRef1 was taking a reference of the input, which
meant in the first test it would get a reference to the temporary
created by the 1 literal. A temporary that would be out of scope by
the time we check its value.
Instead add a test with unique_ptr to test we can pass movable
temporaries.
Change-Id: I6b02377dfe30c82b6e71bfb3353a81ad81558ed3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qt5_add_big_resources is only available if using CMake 3.9 and later.
This amends cdccd0222b.
Task-number: QTBUG-55680
Task-number: QTBUG-75806
Change-Id: Ibba7af6ee7edfb226368937d543b7ec5cc93eb16
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
- Move the fuzz check introduced by
6309062722 to a shared header for
reuse. Use it in in more places to account for rounding errors
introduced by odd window frame sizes when scaling is active.
- Use the test widget size to ensure windows do not violate the
minimum decorated window size on Windows when scaling is inactive
on large monitors.
Task-number: QTBUG-46615
Change-Id: Icf803a4bc2c275eadb8f98e60b08e39b2ebebedd
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
It should have been qfloat16(1)/qfloat16(infinity) in any case.
Sadly, that behaves no better than qfloat16(1.f/qfloat16(infinity)),
which was promoting the infinity back to float. So retain the check
for over-optimization (but make the comment more accurate).
This is a follow-up to d441f6bba7.
Change-Id: Iec4afe4b04081b0ebfbf98058da606dc3ade07f4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... spotted with the brand-new checks for that in QCharRef.
The rx[i] == ~~~ check is clearly wrong, as rx is the regexp
we're building and `i` was not supposed to index into it.
The intended meaning was wc[i] == ~~~, testing if we were seeing
the closing bracket of a character set. We need to check for
that immediately for dealing with the special syntax of []...] where
the ] belongs to the character set (it can't be the closing one
as character sets cannot be empty).
Fix and add a regression test. Bonus: this code was almost
unchanged since 2009.
Change-Id: I958cd87fc25558e9d202d18b3dd4a35d0db16d8d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: hjk <hjk@qt.io>
The value of NColorRoles got changed since 5.11. It introduced one more
role called "PlaceholderText" in the ColorRole enumeration.
When using QDataStream (5.12) to read QPalette objects from a file
written by 5.9 (<5.11), the processing results are inconsistent.
Fixes: QTBUG-74885
Change-Id: I14d57f9603a26e5890b4fd57c7e464c5b38eb3f2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Fix some ui glitches for QAbstractSpinBox:
- update geometry when buttons are toggled on/off
- calc button size with subControlRect instead hardcoded 20px
- when buttons are not shown, don't add the button size in
sizeFromContents for common and macOS style
Fixes: QTBUG-39713
Fixes: QTBUG-75303
Task-number: QTBUG-67126
Change-Id: Ibf330c76deb16358a481bba6bd429fff6a5d57ae
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QScopedPointer uses normal delete, but we need delete[].
Change-Id: Id62a2c55f75ef4aa60580f5e04c4bf306a6dd3c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Such files do not exist (as per QFileInfo::exists), but on some
platforms that rely on realpath(), QFileInfo::canonicalFilePath did
not return the empty string.
Use the same logic on macOS as we already did on Android, and include
a test case. Remove the unnecessary dynamic memory allocation and
use a stack-allocated array instead, unless we use modern POSIX in
which case realpath() will alloc the memory for the result for us.
Change-Id: Ide987c68ebf00cbb7b1a66c2e9245a12c7807128
Fixes: QTBUG-44242
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's not clear why this test fails - and only does so sometimes - but
fail it does, so we ned to skip it to let development keep going. As
it happens, the same platform over-optimizes various computations
using qfloat16; which can at least be used to test for this platform,
since it wrongly distinguishes two qfloat16 values that theory and all
other platfomrs agree should coincide.
Fixes: QTBUG-75812
Change-Id: Ie9463d7dc21bca679337b475d13417b9f42bbf9b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Add support for surrogate code points U+D800 through U+DFFF,
represent them with JSON escape sequences.
https://github.com/tc39/proposal-well-formed-stringify
Change-Id: I84fea53a8ef400beebefdba10ea82dc510fe7dda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test is failing in 5.13 for unknown reasons.
Task-number: QTBUG-72296
Task-number: QTBUG-72344
Change-Id: I24c1ad1b6def3096de99caeeebeee6e204cc75ca
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Conflicts:
src/corelib/tools/qlocale_data_p.h
(Regenerated by running the scripts in util/local_database/)
src/gui/opengl/qopengltextureuploader.cpp
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: I12df7f066ed0a25eb109f61c4b8d8dea63b683e2
If the deadline is far in the future, the conversions to nanoseconds
or internal arithmetic may overflow and give an invalid object, thus
the deadline may end up in the past. Added a test to the testlib
selftest for sleep.
[ChangeLog][QtCore][QDeadlineTimer] Fixed integer overflows
leading to immediate timeouts.
Task-number: QTBUG-69750
Change-Id: I9814eccdf9f9b3add9ca66ec3e27e10cd5ad54a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The window tends to grow to span screens in multi-screen setups; force it to
be on the primary screen by showing it maximized in that case.
Change-Id: I984ba7a4cd4abd1f862c59c8dca0e2275f44c724
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
- Use nullptr
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Use Qt 5 connection syntax where possible
- Ensure top level widget list is empty after each test, delete left-over
menu bars and disable menu animations
Change-Id: Ieeb943ea669cd139f1835088b816802e777a9676
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use a fuzz check (cf 6309062722) and a minimum
size similar to tst_qwidget to make the test pass on large monitors with or
without active scaling.
Change-Id: I5a9e28e38e1d007057894c349c94f0e6fe12009c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- Use nullptr
- Fix C-style casts
- Fix redundant bool expressions
- Fix else after return
- Remove unnecessary casts to int from registered enums
- Fix most signedness-related warnings
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Use Qt 5 connection syntax
- Remove unused variables
- Streamline code in some cases
Change-Id: I1350b382b0b7d0f3198039fdc78892cfa1dd498d
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
