these variables have no legitimate use when building qt itself, but have
great potential to wreak havoc.
Task-number: QTBUG-60016
Change-Id: I161837463443af82d48145e75952fa529212fe75
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
it makes the call more noisy for no particular reason.
and the new code is even easier to read ...
Change-Id: Ib4dfd373f351eeaca99e6bfc42b631f931ec987d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
now qmake is the last command called by the unix configure script.
as it happens, this was already the case in the windows script, but only
because it didn't print these messages at all, which it implicitly does
now.
another effect of this is that repositories outside qtbase will now also
get the installation note in modular builds, which makes sense.
Change-Id: I567146936b216185a8e0f61e445222215608bf13
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this is rather hacky. a proper solution would auto-generate help from
the command line argument definitions, at the cost of needing to
bootstrap qmake first.
Change-Id: Iada6e25d5b31d7db0595309887f2d13295bbc1e3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
we pull this feat off by booting configure with a dummy spec. the proper
spec gets loaded subsequently.
note that it was necessary to move the cache loading after processing
the early checks (from which the spec handling is triggered). this is
just fine, as the cache is needed only by tests, which are forbidden at
this stage by definition.
Change-Id: I5120e25a8bf05fb8cc5485fd93cf6387301089aa
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this moves us another step towards the "outer" configure doing just
minimal bootstrapping of qmake.
a challenge here was that so far, qmake itself needed qconfig.cpp. this
was replaced by usage of a qt.conf file instead of compiled-in values.
however, to make the executable still self-contained, that qt.conf is
embedded into it (by simple appending of a fixed signature and the text
file).
the qmake with the embedded qt.conf is not used for the qt build itself,
which instead relies on the qt.conf in bin/ as before. however, due to
the missing built-in values, this file now needs to contain more
information than before. but except for a minimal version that is needed
to start up qmake/configure at all, that file is now also generated with
qmake. as some of the newly set up properties are subsequently used by
configure itself, qmake gains a (deliberately undocumented) function to
reload the qt.conf after it's fully populated.
unlike the old implementations, this one doesn't emit redundant qt.conf
entries which match the hard-coded fallbacks. omitting them leads to
leaner files which are more comprehensible.
Started-by: Paolo Angelelli <paolo.angelelli@qt.io>
Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
in its current form, it was introduced only in 5.7, mostly as a side
effect of -external-hostbindir (which is now handled differently).
it only ever worked for the macOS and MinGW specs, as a side effect of
them supporting -sdk and -device-option (for good reasons), and was
supported only by the unix configure. it's not believed to be really
useful and complicates matters somewhat, so get rid of it again.
should it ever become actually relevant, it can be re-introduced
properly, probably along with a -host-sdk option for macOS.
Change-Id: Ib078469ea39deb821c7b6a8c67fda9e1a95fedf5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
its only consumer is qt_tool.prf, which is an internal api.
Change-Id: Iae90b079c5af60efad2ded70d6ea481212e5353a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the qmake bootstrap uses some of the options, so the configures still
read config.opt for their own purposes, but the general handling is
entirely in the new system now.
Change-Id: I2c6c657d4da01c8d520ac74795454747bb224bdd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this also removes the need for passing pre-processed options via
configure.cfg, so get rid of that.
a somewhat unfortunate side effect is that the android-style-assets
feature had to move back to the top level, as the licensing options
depend on it.
Started-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: Id4d1e0ba18b3e3104400293b8f0c7f2f65e68dea
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... instead of having (duplicated) code in the configures to create it.
Change-Id: Ia86b44021a024a969f5a49b7fb18d3d414869f93
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
it was rather unexpected that this was done, entirely inconsistently
with how the rest of the configure parameters are handled.
Task-number: QTBUG-52266
Change-Id: I6e1d7a4fe1c85d6d64d465517b6be3f3cdda3359
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
if the externally provided qmake had a different on-device install tree
layout, things would go wrong. of course, that's a rather unlikely case,
so nobody noticed ...
Change-Id: I59f9976a769ccb6099b7237ef42555f0549615aa
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... to the new qmake based configuration system.
This removes the old qfeatures.txt (distributed over configure.json
files) and qfeatures.h (distributed over qconfig-<module>.h files).
qfeatures.prf is gone without replacement, as attempts to use it would
lead to followup errors anyway.
Change-Id: I1598de19db937082283a905b9592d3849d2199d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This change implements the required infrastructure to modularize the new
configuration system.
This requires a hierarchy of configuration files, both for handling
multiple repositories and for individual modules inside the same
repository.
When configuring, they all need to get loaded first, as command line
processing needs to know about all possible command line options.
When the command line has been processed, the individual configuration
files need to get processed one after the other and independently from
each other.
Configure is now automatically invoked when building the a project
tree's "root" project; this works with both modular and top-level builds
of Qt (the latter with an according change in the super repo). As an
immediate consequence, the -skip option moves to the super repo with a
different implementation, as configuration is now done after the repo
list is determined. The option belongs there anyway.
This commit also adds an optional testDir entry to the json file. Like
this, we can still have all configure tests in qtbase/config.tests and
the configuration file in, e.g., corelib can reference those.
The files section can now be left out as long as a 'module' entry is
present, specifying the module name. The names of the files to generate
can then be deduced from that name. We still need to be able to specify
names directly for the global configuration files.
qtConfig() now also queries features which are module-specific. As it is
sometimes necessary to query the configuration of modules which should
not be actually linked (and cannot in the case of subdirs projects), the
new variable QT_FOR_CONFIG which allows specifying configuration-only
dependencies is introduced.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Id1b518a3aa34044748b87fb8fac14d79653f6b18
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
CFURLCreateDataAndPropertiesFromResource and
CFURLWriteDataAndPropertiestoResource have been
deprecated since 10.9. We replace them with simple
QFile access.
Code cleaning and included.
Change-Id: I19c7ceac41c8c511962f1128bd8e210e3adb434c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
On macOS, even if pkg-config is present in the path, configure will by
default correctly ignore it and set no-pkg-config. However, this was not
propagated to qmake when invoked from config.test, so tests which rely on
that did not work.
This was leading to pkg-config (installed from homebrew) to be used in
the libpng test, so it succeeded. But the later Qt build would fail to
find png.h from homebrew, as it correctly ignores pkg-config.
Task-number: QTBUG-55011
Change-Id: Ic6fb866bea0551f528da56cb545174dcd9bacf0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
On RHEL 6.6, mysql_config --libs returns "-rdynamic" among other arguments.
The configure test (config.tests/unix/mysql) would end up passing that
to qmake. qmake responds with "***Unknown option -rdynamic ..."
Change-Id: Ib1300e62aec8a5d866359f3eaea88d9648c872b9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
(cherry picked from commit d7e27e4d26)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
implement it in configure.exe and fix it in configure.sh.
Change-Id: I30764f4cba4bad0f23bfb40ce7a2ca614e1afd71
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
write them to the top-level build dir, not the qtbase build dir.
the old files will be still used for a smooth migration.
Task-number: QTBUG-46974
Change-Id: I6eae678ffc7dfb921ecd9e9012e79e3b915ad3fa
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
instead of saving the files away and restoring them afterwards, use the
new and shiny discard_from() function to throw away everything the files
might contain.
strictly speaking, this is not precise, as the pris may also use *=, -=,
and possibly other operations which cannot be trivially undone, but the
purpose is essentially to discard the special outputs of some features
which may affect subsequent tests, for which this is sufficient.
as a side effect, the failure to load qmodule.pri is not fatal any more
(like for qconfig.pri), to save the pointless effort of ensuring that it
exists.
Change-Id: I07625b60c4f2e27b21206b2c16d24ab111737395
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
"clang -v" on FreeBSD reports something like "FreeBSD clang version
x.y.z [...]" instead of just "clang version x.y.z [...]", which fails to
match the sed pattern in the configure script, resulting in qconfig.pri
having no clang version defined.
Augment the pattern so that both version strings match.
Change-Id: I5f38f8480f4b1156ca7147e32c1157a009557035
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
cleaner, and covers windows as well.
Change-Id: I0e884909a3f49610fab750ba1ef6112f43e5d5d1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
that is, save it to config.opt and recall it when -redo is used (and do
not write it again in this case).
a trivial config.status is still created, as having it is very
convenient when shadow-building.
Task-number: QTBUG-38792
Change-Id: I5e9f7374d6bfc60c427cbfd5e9b3e68bfcaae9f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
it is sometimes desirable to override values from the mkspec without
modifying (or wrapping) the spec itself. linux distributors do this on a
regular basis.
so far, we'd pick up CFLAGS, etc. from the environment, in a somewhat
autoconf-like fashion. however, over time, this approach proved
problematic: the concept doesn't mix particularly well with mkspecs to
start with, is unexpected (and therefore causes frustration), and
doesn't mix well with cross-building (at least the way it was realized).
ironically, it was implemented this way (quite a while ago) upon my
explicit request ...
the new mechanism uses explicit variable manipulations on the configure
command line, just like qmake itself understands. as it happens, this is
again quite similar to autoconf-generated configure scripts. however,
this time around we don't pretend to be actually autoconf-like, so we
also don't try to map any variable names (some of which have different
semantics anyway).
this commit also eliminates the last use of the QMakeVar() function,
so delete it and the underlying infrastructure.
Task-number: QTBUG-32530
Task-number: QTBUG-42962
Change-Id: Id31a6b80e1add08ca21f5b178614bda530d12374
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Conflicts:
src/corelib/io/qtemporarydir.cpp
One side encapsulated a repeated piece of #if-ery in a local define;
the other added to the #if-ery. Made its addition to the other's.
src/corelib/kernel/qeventdispatcher_unix_p.h
One side moved some members into a struct; this collided with a #undef
check that neither side now has. Discarded the #undef part.
src/gui/opengl/qopengltexturehelper_p.h
5.7 deleted a bunch of methods; not clear why merge got confused.
src/tools/moc/moc.cpp
One added a name to the copyright header; another changed its URL.
Change-Id: I9e9032b819f030d67f1915445acf2793e98713fa
it's somewhat questionable to save the environment of pkg-config, but
not that of many other things we use.
additionally, we now have logic to automatically set it up from the
sysroot when it's missing.
This reverts commit 228392aff2.
Change-Id: I0612c196c9a5023bb3ef436aebfb87cb46d8cd14
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it positively makes no sense to have a configure test which will be
never reached due to the configure/qmake bootstrap failing with a
slew of totally unhelpful error messages.
pre-standardization partial c++11 implementations are now rejected,
except for VS2013, which is still sufficient despite not announcing full
compatibility.
Change-Id: I58af10e03960af06b80cedac105cf8433f7a1745
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since Xcode 8 (beta 2) that tool is no longer available
through xcrun. We resort to xcodebuild instead.
Change-Id: If9d7b535c1cbac2caae0112b2003283aeff34fb9
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Detect host and target architecture from within qmake, and set
QT_ARCH accordingly.
Change-Id: I30255f88c7645d197bd07355a1dff02b377cbbe8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This can be helpful for packaging and when one wants to limit the
features to ES 2.0 to ensure the same code is used on both build
machine and deployment machine. It also prevents inclusion of
GLES3/gl3.h. Windows configure.exe doesn't do auto detection of
GLES3 so it does not get the additional option.
Change-Id: I8750b41635e41bd0ac41d9d59d93570f7d2196e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Command line arguments, configure tests and features are now
defined in a json file and a configure.pri containing some
custom functions.
qmake uses the json file to determine command line arguments,
tests and features to be executed at configuration time.
A new qt_configure.prf contains all the infrastructure to parse
the command line, run the configure tests, determine the set of
available features and create a report about it.
Change-Id: If30ac089dd3e9f8c67ebd642bde10cfa960893bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
