Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The test blacklisted have been found using CI builds logs.
Change-Id: Iac07316862cff9b5085dacdf9f35e691cff09384
Task-number: QTBUG-27571
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Windows Runtime side callback is run from XAML thread and receiver
is at UI thread thus sendEvent asserts. Use synchronous system
interface key event handler to deliver the event.
Task-Id: QTBUG-48105
Change-Id: I91a8ef6fd29c277edfb699b688b9e7895dadda8f
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
It was possible for Windows Runtime callback to run while integration
class was constructed. That caused an assert when handling
application state change. Fix this by connecting callbacks after
integration class fully constructed.
Change-Id: I029c2e1f932e8edc3665443cc17dbf11eaae1bf6
Task-Id: QTBUG-48109
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Initialize locale from current keyboard value and listen
to WM_INPUTLANGCHANGE.
Task-number: QTBUG-48772
Change-Id: I53b6ef4e2cf538bb81b41ea497ed0cb66991b104
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
As a corner case on BSD systems, we use IP_RECVIF control message to
retrieve an interface index of the received datagram. Take care about
sockaddr_dl structure, while calculating a size of the ancillary
data buffer.
Change-Id: I1c113d390a4929489c4c5858847b6262f1baa204
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Avoid duplication of slashes and use static variable for the
const part in settingsPath().
- Do not run expensive cleanup twice in init()/cleanup() as was
before by moving the code into a separate cleanupTestData()
function called from cleanup() and initTestCase().
- Use QDir::removeRecursively() (which should be able to deal
with readonly files, etc after 26bcc0565f )
instead of system calls or the special removePath() function for
CE/RT.
- Switch QStandardPaths into test mode.
Change-Id: Idcde2d17020eae1ea43e448266e3940c06f174ef
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Assuming that the target is always GL_TEXTURE_2D is not going to be sufficient
when working with EGLStreams for example where GL_TEXTURE_EXTERNAL_OES is a
must. The blitter is now changed to support multiple programs so other targets
can easily be added as well in the future, if necessary.
Change-Id: I247d30600222fb5af6305ed5d9740baa5e43e83e
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
The relevant easing curves all start out fast and end stationery; so
it's at the *end* that they attain zero "velocity", so they're
decelerating *to* zero, not from it.
Change-Id: I69874c46c8d42f185ff815295c4470a195cc43ae
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Check for MSVC2015 to enable usage of IInputPane(2). Move object
construction to the XAML Thread, otherwise instantiation will fail when
running on desktop.
Task-number: QTBUG-44494
Change-Id: I816230cc5b0def796e86e6c6bb05a552a4e59d1b
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Remove unnecessary type casts in qdocindexfiles.cpp, and reduce the
amount of duplicate string literals used for generating QML
documentation.
Change-Id: Ia6d68a44fad14bd7414c0106e8752999830c93e8
Reviewed-by: Martin Smith <martin.smith@digia.com>
The examplesinstallpath variable in .qdocconf files defines the path
under QT_INSTALL_EXAMPLES where examples are found.
To match the way examples are packaged in Qt 5.6, prefix each
install path with the repository name.
Task-number: QTBUG-48736
Change-Id: I6a35c94fdacaad21cd044411aba02027b9019300
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Qt 5.6 now includes a version of the offline documentation template
with simplified CSS suited for rendering HTML with a QTextBrowser
backend.
Select the template in qt-html-templates-offline.qdocconf, instead
of the higher-level qt-module-defaults-offline.qdocconf. This is
better because many projects external to qt5 (including Qt Creator)
do not use qt-module-* includes. This way, we can control the
template selection for all projects from a config file.
Change-Id: I766af422d829f3c9519c5a45093473175363d600
Reviewed-by: Martin Smith <martin.smith@digia.com>
This way, it's possible to tell which applications and libraries depend
on the Qt private API and of which Qt library. Linux distributions can
use this information to decide which applications need to be recompiled
every time Qt itself is rebuilt.
This is done by scanning all class and struct definitions in the private
headers (we've already got the list from syncqt). I opted to add a new
script instead of modifying syncqt because then this can run in parallel
with the rest of the compilation, as opposed to during qmake
time. Another advantage is that it catches modifications to the headers
in between qmake executions.
Since this is already Unix specific, it should be no problem to use Perl.
This solution is limited to use of non-inline symbols of classes
declared in private headers. It will not catch free variables (such as
qsimd_p.h's qt_cpu_features), use of inlined functions or just plain use
of a class/struct for accessing its data members. However, this is
already better than nothing and should help Linux distributions quite a
lot. And there's no way to catch the latter issue anyway.
Change-Id: I049a653beeb5454c9539ffff13e3fff36400ebbd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... and make use of it in qt.prf.
[ChangeLog][qmake][Unix] Added support for relative paths in
QMAKE_RPATHDIR.
Note that this technically breaks backwards compatibility, as relative
paths were previously silently resolved against $$_PRO_FILE_PWD_. This
was not documented and seems rather useless, so i'm not worried.
Change-Id: I855042a8962ab34ad4617899a5b9825af0087f8a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
See the comment in the header for an explanation of what it does.
This trick is enabled for every single .o that is compiled, unless
QT_NO_VERSION_TAGGING is defined. The assembly expands to a COMDAT
section, which is mergeable by the linker, so only one copy of the
output is present in the ELF module.
This is enabled only for Linux and x86 / x86-64 / x32 due to the
requirement of writing assembly and relocations, so it needs to be
tested on each platform, which I have not done. It might work on
Solaris/x86, but again it requires testing. Support for other
architectures requires different assembly output and relocations and can
be added as needed, but they are not as important since this trick is
has most value on desktop systems.
Change-Id: I049a653beeb5454c9539ffff13e3ff5782a8cb86
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Rex Dieter <rdieter@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The only reason I had used them in the first place was because C
preprocessor macros cannot call themselves recursively. But the magic
was too magic and caused issues with some builds, so let's choose the
safer option.
Anyway, this solution now works for all ELF architectures, independent
of the processor, whereas previously it was restricted to x86 and Linux/
FreeBSD. However, this does not apply to the assembly in
qversiontagging.h.
Change-Id: I42e7ef1a481840699a8dffff1404f032fc5cacb8
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
If that section is there but empty, the manifest cannot be loaded using
the App Manifest Designer in Visual Studio.
Task-number: QTBUG-48648
Change-Id: I529eb2f2a690bececcf5c385b8f96e84ece363d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
WINAPI_FAMILY_APP is deprecated, so use WINAPI_FAMILY_PC_APP instead. Also,
open up the phone partition for use on MSVC2015.
Change-Id: I7476d71c31395b2914f5a1439e8088341976bf2f
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
msvc-desktop.conf does disable the exception warning for building all
modules, so use the same set of compiler flags for building qmake.
Change-Id: I97026f3cb78e656e8de76e1c8afe19cec6501499
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Change-Id: I391be8bda3a5cb4873b89b437d2b76b1cd88261f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Unlike other platforms and the EGL path, this one tries to parse
GL_VERSION on its own. Unfortunately it breaks for certain version
strings: we cannot assume more than major.minor in the beginning
and so looking for a second dot is wrong.
For example, "2.1 Mesa 7.11-devel" is parsed as major "2", minor
"1 Mesa 7" (result in 0), leading to a version of 2.0 instead of 2.1.
To overcome this, use the common helper function in
QPlatformOpenGLContext.
Change-Id: I460f4276a3a06659b542e0c076ddc1ada3122907
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
When the activity is paused, all runOnUi actions are dropped :(, this
patch ensures that no action is lost no matter what.
Task-number: QTBUG-45526
Change-Id: I61db4f73b0d2da47bf71a1324dc40b90dab01e81
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Second value of QPair is not used.
And add reserve for "indexNode->visibleChildren" list before pushing.
Change-Id: Ia002130c929f71e0802f73f4c0694fd2887b4c91
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Now that Qt Location is a fully-supported module in 5.6, it is
worth highlighting an example that demonstrates the new feature.
Change-Id: I70553f84af5587e3604115684ea1ea75203b91ce
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Without QT_BEGIN/END_NAMESPACE, the qt_mac_socket_callback is not resolved as
a friend function of QCFSocketNotifier, which is required due to access to
private members of QCFSocketNotifier.
Change-Id: Ief89e18f8b4f7fc4cb013a33959db1dd90eb9efe
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
QLatin1String wasn't really tested except as a drive-by.
Unearthed a discrepancy with docs. Fixed the docs.
Change-Id: I1246bb33888132edbc4e22da792a480a156357bf
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Don't call showSoftInput() if the state is set to _HIDDEN or
_ALWAYS_HIDDEN by the user.
Task-number: QTBUG-46528
Change-Id: I5dbaf612cf4f339c5288d6d3292c27cc6217f3af
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Removing and adding a view each time the layout parameters changes is
triggering unnecessary layout updates. The affect of this is not very
visible since there are few views in the layout, but the procedure is
never the less wasteful.
Change-Id: I2540ab519b12c6d3e10457e2e518b439118b966d
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
It doesn't allocate memory, so cannot throw and is a lot faster
than qgetenv().
Change-Id: I863593166db8eff4c4466996110f5cfdb758ec00
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Check whether the action under the mouse is enabled before closing.
Task-number: QTBUG-48493
Change-Id: I2a0669840b9b6c81dacdf179325301c02f1c0c35
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The delegate may be null in QHeaderView.
Task-number: QTBUG-48543
Change-Id: I4d3ba104b0b57431e8765271dc2dc880be096672
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Created local inSelection function to modify the x value (similar to
xToPos()) before sending it to the control. Ran the QLineEdit test and
manually tested with AlignLeft, AlignRight and AlignCenter.
Change-Id: I088430580dc87f3cfff90c4cd9ff90e6ab215f57
Task-number: QTBUG-48495
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
We need to add header template for commercial only modules in the
upstream now when we are using same ci system for building and testing
all. Without this tst_licenses.pl will fail in coin for those
commercial only modules
Change-Id: Ifb8170818b3b730b10e920012757af42442f0edc
Reviewed-by: Iikka Eklund <iikka.eklund@theqtcompany.com>
Reviewed-by: Sami Makkonen <sami.makkonen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
- Use QDBusServiceWatcher to detect that pong service became available
(QDBusConnectionInterface::serviceOwnerChanged() signal is deprecated).
- Use new connection syntax.
Task-number: QTBUG-28082
Change-Id: I7b93b961ee6d45aaeefab77fa1d1943e38b4a4c0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
