There are too many combinations and the data is not very useful when
it is impossible to get an overview. This cuts a few rare formats out
and reduces the sizes tested to one small for overhead benchmarking
and one large for bandwidth benchmarking.
Change-Id: If0fe33e0e02b8cba771094a79072036f2cd4cf48
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Uses the scripts and tests we already have for lancelot as a painting
benchmark.
Change-Id: Idf8a55e2261162e619f6dbb567dc19f8dc96da4e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Especially in examples, where we should show off our convenience
functions, prefer calling these functions over doing arithmetic with
M_PI (or approximations thereto) and 180 (give or take simple
factors). This incidentally documents what's going on, just by the
name of the function used (and reveals at least one place where
variables were misnamed; the return from atan is in radians, *not*
degrees).
Task-number: QTBUG-58083
Change-Id: I6e5d66721cafab423378f970af525400423e971e
Reviewed-by: Jüri Valdmann <juri.valdmann@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
... as it has outlived its original purpose:
Qt3 implementation on X11:
void QApplication::flush() { flushX(); }
void QApplication::flushX() { if (appDpy) XFlush( appDpy ); }
Qt4 implementation on X11:
Did nothing when QApplication::flush() was called (the flush()
overrides in {unix,glib} event dispatchers with empty bodies).
In Qt5 this function somehow has been repurposed (inconsistently)
to do what QCoreApplication::sendPostedEvents already does:
QAbstractEventDispatcher::flush() = 0;
=> QCocoaEventDispatcher::flush() {}
=> QEventDispatcherCoreFoundation::flush() {}
=> QIOSEventDispatcher (does not override ::flush())
=> QEventDispatcherGlib::flush() {}
=> QPAEventDispatcherGlib (does not override ::flush())
=> QEventDispatcherUNIX::flush() {}
=> QUnixEventDispatcherQPA (when QT_NO_GLIB=true)
::flush() { if (qApp) qApp->sendPostedEvents(); })
==> QAndroidEventDispatcher (does not override ::flush())
=> QEventDispatcherWin32::flush() {}
=> QOffscreenEventDispatcher::flush() {
if (qApp) qApp->sendPostedEvents();
QEventDispatcherWin32::flush();
}
=> QWindowsGuiEventDispatcher (does not override ::flush())
=> QWindowsDirect2DEventDispatcher (does not override ::flush())
=> QEventDispatcherWinRT::flush() {}
=> QOffscreenEventDispatcher::flush() {
if (qApp) qApp->sendPostedEvents();
QEventDispatcherWinRT::flush();
}
=> QWinRTEventDispatcher (qminimaleglintegration.cpp) (does not override ::flush())
=> QWinRTEventDispatcher (qwinrteventdispatcher.h) (does not override ::flush())
Whatever this function was doing on macOS in Qt3 and Qt4 also has been
dropped in Qt5. It appears that the other event dispatchers in Qt5 that
have overrides for flush() have simply copy-pasted this logic.
Clearly the documentation of QCoreApplication::flush() is outdated and
has nothing to do with the actual implementation in Qt5.
This function is rarely used in Qt5 sources. It should be safe to remove
the calls to QCoreApplication::flush() from Qt source code, as this
function has been doing nothing on most platforms anyways. Repurposing
it even broke handling of posted events (see QTBUG-48717).
[ChangeLog][QtCore][Event loop] QCoreApplication::flush() is now
deprecated. Use QCoreApplication::processEvents() and
QCoreApplication::sendPostedEvents() instead.
Task-number: QTBUG-33489
Task-number: QTBUG-48717
Change-Id: Icc7347ff203024b7153ea74be6bf527dd07ce821
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar@crimson.no>
benchmarktests.h:323:18: warning: field 'm_as_pixmap' is uninitialized when used here [-Wuninitialized]
benchmarktests.h:371:18: warning: field 'm_as_pixmap' is uninitialized when used here [-Wuninitialized]
benchmarktests.h:417:18: warning: field 'm_as_pixmap' is uninitialized when used here [-Wuninitialized]
Change-Id: Ica496e3baa19e0701c64222ce8ab92ec94178db7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adds missing image-formats so it doesn't segfault.
Also changes the exclusion of rare formats to lists of included ones
Change-Id: I1d00562cf8e96baa03121a0b996764224911e06a
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Before: HexRgb: 0.00230 ms per iteration, HexArgb: 0.00290 ms per iteration
After: HexRgb: 0.00051 ms per iteration, HexArgb: 0.00061 ms per iteration
This showed up as a relevant optimization when profiling KIconLoader
which uses QColor::name() as part of the key -- thanks to Mark Gaiser for
the investigation and first suggestion of a solution. I have also seen
customer code writing a replacement for QColor::name() because it was
too slow to be used as a hash key.
Change-Id: I009ccdd712ea0d869d466e2c9894e0cea58f0e68
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Basic optimization of conversion from indexed8.
Task-number: QTBUG-35747
Change-Id: Ic9d32789769eadb05fbecfebf2d2f2c87d66610b
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Our handling of plugins when Qt is build statically is
nowadays good enough, so we don't need to build the
JPEG and GIF support directly into Qt for static builds.
Let's simply always build them as plugins.
Also simplify the logic in configure, and get rid of the
no-gif, no-jpeg and no-png config variables.
[ChangelLog][Build system] JPEG and GIF image support is now
always built as a plugin. Removed -imageformat-[jpeg|gif]
arguments to configure.
Change-Id: Ic01559ff406c966807b3be8761252e8802adcdf7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Calling qMin often prevents effective vectorization, and it is only
necessary when converting from formats with mixed color-channel widths.
Change-Id: I2a0f3f3fb528d45be1fd025758f9d915ee1736c0
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Using shuffle and align storing our quint24 format can be done much
faster. This in particular improves conversions to RGB888.
Change-Id: I179748706a33a43fd6f60f5c40287317418c8867
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Fix usage of API that is marked deprecated.
Change-Id: Ib9a45e93084fb5b0d0d3aefd64b755dff7c696d6
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
QTextLayout::additionalFormats setters and getters using QList<FormatRange> have
been deprecated; port to the QVector versions.
Moved op== definition for FormatRange needed in tst_qsyntaxhighlighter.cpp
to a friend declaration in FormatRange itself, because MSVC 2008 doesn't find
it otherwise.
Change-Id: Ibab6589df057f02377d895079b56395859e3401e
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Completes the inplace converters so that we can rely on inplace
conversions to succede as long as the image depth is the same.
Change-Id: Ia1ae34b5de1bc16e87ff5403bdacfcae44a22791
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Cleaning up smoothscale code. Upscaling is improved using existing
optimized interpolation methods, and downscale is given SSE4.1
optimized versions.
Change-Id: I7cdc256c26850948aef7dae26fda1622be6b8179
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Improves the conversion from RGB888 to RGB32 on platforms without SIMD
versions. This includes the fallback used on non-neon ARM devices.
Besides image conversion the routine is also used for decoding JPEG.
On x86 this version is within 0.7x of the speed of the SSSE3 version.
Change-Id: Id131994d7c3c4f879d89e80f9d6c435bb5535ed7
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
There are many direct QImage conversions that doesn't need to be direct
but only are because they are faster than the generic conversion. This
patch optimizes the generic conversions and then removes all the direct
conversions that are now no faster than the generic.
Change-Id: I3dc5f44cc7f6358fd66420e9974eebaf2c7ca59c
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
The autovectorized versions of premultiplying conversions are almost
twice as fast with SSE4.1 as with SSE2. Therefore this patch lets
compilers that can make those versions convenient without duplicating
code do that and lets us use them when available.
Change-Id: I699035963abe55a38b9ef8ba7b4a8c961c8dfcdd
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
We still have a bunch of Q_WS_ ifdefs in our code, which are easy to
mistake for Q_OS_ ifdefs when quickly scanning the code. By renaming
the ifdefs we make it clear that the code in question is dead.
In incremental follow-ups, we can then selectively either remove, or
port, the pieces that are dead code.
Change-Id: Ib5ef3e9e0662d321f179f3e25122cacafff0f41f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
With auto-vectorization enabled in QtGui, the 32bit version of
qPremultiply is faster than the 64bit version since it can be vectorized
wider (4x on 128bit as opposed to 2x). Since all our important 64bit
targets have SIMD, that makes the 64bit version pointless.
Change-Id: I4e9070a3a3c8e2b54f17a95ba0aee0405cbb8ec9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The class hasn't been used for a while anymore. Since it's
private, simply remove it from QtGui.
Change-Id: Ia0911d1c8b8836d963a51c8e354c96bc1ee4093f
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Cost of a type lookup for core built-in types is really small, just few
cpu instructions, but the benchmark was testing create() and destroy()
functions (in a different fashion) which by definition allocate and
de-allocate memory. These memory operations are significantly more
expensive which obfuscate the results.
Change-Id: I33c679f57e6c2b57e98328f076dfe249ab7bcde8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
main.cpp(332) : warning C4307: '*' : integral constant overflow
tst_qpainter.cpp(1293) : warning C4305: '+=' : truncation from 'double' to 'float'
tst_qpainter.cpp(1474) : warning C4305: '+=' : truncation from 'double' to 'float'
tst_qtbench.cpp(155) : warning C4267: 'initializing' : conversion from 'size_t' to 'int', possible loss of data
main.cpp(68) : warning C4189: 'fontHeight' : local variable is initialized but not referenced
Change-Id: If6aadd50df7c5cf7d0f33791c9247730a47ddd27
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
