widgetlessNativeDialog() is the only test function that creates
a native file dialog instance. GTK+ versions prior 3.15.5 have
a nasty bug (https://bugzilla.gnome.org/show_bug.cgi?id=725164)
in GtkFileChooserWidget, which makes it leak its folder change
callback, causing a crash "at some point later". Running the
native test last is enough to avoid spinning the event loop after
the test, and that way circumvent the crash (QTBUG-55276).
The crash has been fixed in GTK+ 3.15.5, but the RHEL 7.2 CI has
GTK+ 3.14.13 installed.
Change-Id: I867755969a4458693bd12f848d052adf77a2086e
Task-number: QTBUG-55276
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Prevent QAbstractSpinBoxPrivate::interpret() from bailing out
in focus changes after text has been entered.
Task-number: QTBUG-55249
Change-Id: I250b3c50f7db5de2e9356038df20f18ee059df11
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
These auto tests were trying to not create native dialogs, but setting
the QFileDialog::DontUseNativeDialog option is too late to control the
creation of the platform helper. It is already created at construction
time, unless Qt::AA_DontUseNativeDialogs is set.
Task-number: QTBUG-55276
Task-number: QTBUG-55281
Change-Id: Icf474e97059ac03a5fa01bd3a17f07203da5770a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QStyle was created but never removed
Change-Id: I55011377afd475af28e4ce2cf657e435dd37c96a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Otherwise we can fail to stretch the last section when adding new
sections.
Task-number: QTBUG-52446
Change-Id: I7eb5267ac500bf4246e57c3e3a43268bb65ef1f7
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
As reported by UBSan:
tst_qtreeview.cpp:2187:36: runtime error: downcast of address 0x7ffc15749f20 which does not point to an object of type 'PublicView'
0x7ffc15749f20: note: object is of type 'QTreeView'
Fix by making the test a friend of QTreeView (and, for
Clang, of QAbstractItemView) instead.
Change-Id: I5b748696ab441a91058f4d45a18bd5ed75a6e560
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As reported by UBSan:
tst_qabstractitemview.cpp:336:23: runtime error: member call on address 0x7ffe6fe96e10 which does not point to an object of type 'TestView'
0x7ffe6fe96e10: note: object is of type 'QListView'
tst_qabstractitemview.cpp:337:5: runtime error: member call on address 0x7ffe6fe96e10 which does not point to an object of type 'TestView'
0x7ffe6fe96e10: note: object is of type 'QListView'
tst_qabstractitemview.cpp:338:23: runtime error: member call on address 0x7ffe6fe96e10 which does not point to an object of type 'TestView'
0x7ffe6fe96e10: note: object is of type 'QListView'
[etc ...]
Fix by making the test a friend of QAbstractItemView instead.
Change-Id: I1a08977042296eb34e9dbdb5c0595662dbd2e5ef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As reported by UBSan:
tst_qtreeview.cpp:663:5: runtime error: load of value 4294967295, which is not a valid value for type 'DragDropMode'
Instead of abusing -1 to indicate to not set the dragDropMode,
use a separate boolean field in tha data.
Change-Id: I13e7539c858f3b2462d57d660062ef3cb7aec61b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Extract the common part from QItemDelegate and QStyledItemDelegate
which uses QLocale to convert a value for Qt::DisplayRole to a string.
Use this code to get the text for tooltips and "What's this?".
[ChangeLog][QtWidgets][QAbstractItemDelegate] Show localized detailed
tooltips and "What's this?" texts.
Task-number: QTBUG-16469
Change-Id: I8618763d45b8cfddafc2f263d658ba256be60a15
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Conflicts:
qmake/library/qmakeevaluator.cpp
One side changed the iterator to use ranged-for, the other changed its
body; they only conflicted because the latter had to add braces around
the body, intruding on the for-line. Trivial resolution.
Change-Id: Ib487bc3bd6e3c5225db15f94b9a8f6caaa33456b
When setting a QFileSystemModel as model, the completion role
is set to QFileSystemModel::FileNameRole. This needs to be reset
to the default Qt::EditRole when setting another model.
Task-number: QTBUG-54642
Change-Id: Ie78d5d417e008ad05a2f995bdbc218b3ad1bc49c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
QLineEdit::setText() emits QLineEdit::textChanged(), which is
connected to QComboBox::editTextChanged(). When a user slot
connected to editTextChanged() sets QComboBox::editable to
false, the line edit will be deleted in setEditable() and
when control returns to QComboBoxPrivate::setCurrentIndex(),
the formerly non-null 'lineEdit' has changed to nullptr,
leading to a nullptr dereference when attempting to set the
completionPrefix on lineEdit->completer().
Fix by re-checking 'lineEdit' after returning from the
QLineEdit::setText() call.
Add a test.
Task-number: QTBUG-54191
Change-Id: I94154796cfde73fb490f8471c48b9d6f62825a92
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Modern SSD drives no longer have short file names enabled, causing
the test to fail.
Task-number: QTBUG-29403
Change-Id: I2e9866d8f8a6ed3df9d2dc6630b8cfa47ade0728
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It tested whether a paint event was received when calling QWidget::repaint()
right after QWidget::show() without waiting for the window to be exposed.
This caused a QEvent::UpdateRequest to be sent, which ended up in
QWidgetBackingStore::sync() which returns after checking
QWidgetBackingStore::discardSyncRequest(), since Qt::WA_Mapped is not set
on the non-exposed widget.
The test passed on Windows since it contains one call to
QCoreApplication::processEvents() which causes the the initial WM_PAINT
message to be processed in QWindowsWindow::handleWmPaint() which calls
QWindowSystemInterface::flushWindowSystemEvents() and causes Qt::WA_Mapped
to be set. This seems counter to the intention of the test.
Remove the test since it won't pass anymore in Qt 5 unless Qt::WA_Mapped is set.
Task-number: QTBUG-26424
Task-number: QTBUG-38327
Task-number: QTBUG-39842
Change-Id: Iede026d52825dcf1f2e9014a316d26d260309214
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It fails randomly on Windows, possibly due to timing issues.
Change-Id: I0ef74f203455eb4ea8aeee4c8fc9bf1fbf6fb8ff
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The test selectWordsFromStringsContainingSeparators() duplicated
in boths tests caused tab and Nbsp characters to be output to the
log, which upsets editors.
Use an array of ushort instead of a wasteful QStringList and
output the hex codes for the unprintable characters.
Change-Id: I08724268f376b4c0da492b4109570e44f7d4a3fb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Whenever a regular QWidget contains a child render-to-texture widget
(like a QOpenGLWidget) that is opaque (attribute
Qt::WA_OpaquePaintEvent is set) and completely covers the parent
geometry, the child widget would not be shown.
This happens because QWidgetBackingStore::doSync contains a check to
see if an opaque child completely covers its parent, in which case it
does not draw the parent, and only draws the child.
This is an issue if the widget is actually a texture-based one, because
for it to be seen on screen, the parent widget has to be redrawn with a
proper blending mask, so that the rtt widget gets properly composed
into the place where the mask is.
The fix consists in keeping the parent widget being marked dirty, in case
it has an opaque texture-based child that completely covers it. This will
force a redraw of the parent widget with a proper blending mask.
Change-Id: If1feec04b86bff2c49158b8d72f175cec252dea1
Task-number: QTBUG-52123
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
There is nothing guaranteeing there will be a paint request after
resizeViewportFramebuffer() is called. However we must not be left
with a framebuffer with uninitialized content. So trigger an update.
Include also a half-hearted autotest. QOpenGLWidget (or QGLWidget)
viewports have not been autotested at all. Try to verify that it
is functional at least, even if we cannot check the actual output.
Change-Id: I34d78fe32e94c39dad919216b5a4f4bb2aea3cc2
Task-number: QTBUG-52419
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
The test was half-ported from Qt 4 and #ifdefed out depending
on WINVER. When it became active, it failed since it queries the window
handle too early in the process.
Move the code sending the message into showEvent() to ensure a window
handle exists and parent the listview properly to prevent a leaking
toplevel.
Change-Id: I74aa9ddfd0e88dd31e9258400fc3e473b6e0d92e
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This has been fixed in 5.6.1 but we can afford the extra test
to guard against regressions.
The setup for this test is two menus, one parent of the other.
The submenu is tearable. We open the parent menu, open its
submenu and then move the mouse cursor straight over the
submenu's tear-off area. The submenu should stay open even
after a short delay.
Change-Id: Ia8ad326d78dde31b6dd91b0ebacf0db1898715d4
Task-number: QTBUG-53068
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This patch reduces paint events by removing code which sets native
widgets dirty in QWidgetWindow::handleExposeEvent. Native widgets are
also marked dirty in QWidgetPrivate::drawWidget, so it is enough for
proper painting.
This restores Qt4 behavior when one resize means one repaint for native
widgets. Without this patch the native widget is marked as dirty on
every expose event, so one repaint is from syncBackingStore and second
(or more) is from marking the widget dirty explicitly.
This patch improves performance of native widgets and it also reduces
locks when paint event is v-synced, e.g. on OpenGL swap buffers or on
any other technology like VDPAU, VA-API, etc.
Added autotest for checking number of paint events for native widgets.
Task-number: QTBUG-50796
Change-Id: I4e1649069e2e73d15b038fd1834d0551915252ee
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QMenuBar now receives a parent changed event for each of its parent,
grand-parent, ... This fixes a crash caused by an invalid QWidget
pointer and makes sure the keyboard shortcuts events are relayed to the
menu bar in all parenting/re-parenting cases by installing an event
filter on each parent
Task-number: QTBUG-53205
Change-Id: I419e6cbc52e28a67fb08a848a7161b4cb8ae4ae5
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Introduce a function going up the widget hierarchy determining a QTransform
for mapping the coordinates applying the transformations of any QGraphicsView
instances found. In mapFromGlobal(), use the inverse of it. This fixes the
case of widget hierarchies embedded into QGraphicsView with transformations.
Increase fuzz in the tests due to float rounding errors.
Task-number: QTBUG-41135
Task-number: QTBUG-50030
Task-number: QTBUG-50136
Task-number: QTBUG-52507
Change-Id: I507e0bccd546250fe9c2d1b74ef38657d61490b4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The QFontDialog test will currently fail for some PCF bitmap fonts
because the list of smooth sizes it uses to populate its size list
contains unsupported sizes. We work around this by adding
QEXPECT_FAIL when we detect that the failure is going to happen.
Task-number: QTBUG-46056
Task-number: QTBUG-53299
Change-Id: Ia665cca220f3622405d1a2336e8d587545cccbc6
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Create parent nodes with the corresponding paths, not with
the absolute path of the child node. Otherwise we will get
incorrect QFileInfo at least in the following case:
QFileSystemModel model;
model.setRootPath("/usr/bin");
QModelIndex idx = model.setRootPath("/usr");
qDebug() << model.fileInfo(idx).absoluteFilePath();
Without the fix it prints "/usr/bin".
It's a regression triggered by 61cefb2f7a
(De-inline QFileSystemModel::fileInfo() and implement it efficiently).
Change-Id: I3b4e5f5b256711e27ad50824eaa8492dbc096808
Task-number: QTBUG-51586
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The test passes on OS X now.
Task-number: QTBUG-8941
Change-Id: I7b57dc30ede7c1ed0bcb8bacb458ea56f222d987
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Sheets are no longer transparent on newer OS X
versions.
Change-Id: Iaaed5aea9c9b130a5d991acd36717b76c3927cfb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The Qt 5 unified toolbar implementation does not move
the toolbar to the “non-client” area. This test is
no longer relevant.
Change-Id: Ia32de2260f8ef400a0dc5acf3e5e3ff59083657a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
On some X11 window managers, 2 events are received when
hiding/reshowing and activating the window, which became
apparent after 91f536dd71.
Change-Id: I66fdc4f69d87ac898b18d5dfddc957617bb8f916
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The old code sometimes made incorrect selections when rows or columns were
hidden or moved. It used logical top left and bottom right indexes to create a
selection rectangle. However on moved or hidden cells a wrong rectangle was
made. This fix calculates a simple rectangle without hidden cells and makes use
of the row/column select functionality provided by the selection model, to make
the right selection.
[ChangeLog][QtWidgets][QTableView] Fixed a selection bug when rows or columns were hidden (QTBUG-50171)
Task-number: QTBUG-50171
Change-Id: Id186012af26da7b2051ff5eb1c13e6b7494cca77
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This patch QSKIPs all tests that:
- take to much time sitting in some QTRY_VERIFY or similar before failing
- result in 'not in fullscreen mode' warning (with PASS) - thus completely flaky.
- Where previously determined to not apply to OS X using QT_OS_MAC
The intent is to make the test run-time more reasonable,
both when running the test locally and on the CI system.
Reduce the BLACKLIST - to avoid a 'double elimination' the tests that are skipped now,
should not be BLACKLISTed so that we fix them for good.
Task-number: QTBUG-52974
Change-Id: I34dc2010d0debc6b5b99f2375a6da902b7a17b29
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Q_OS_DARWIN is the general replacement for Q_OS_MAC,
but most/all of the MAC sections in this test are
OS X specific.
Change-Id: Ic54af9d3dce1e1952a57e15b74acdedf2af60c79
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Fix regression in a7b0cb467c which caused
it to be hard to start scrolling at the ends of a scroll-view if using
fine grained scrolling events.
Change-Id: I55f3210150b993281545c3ad5a7356d892fa30b5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The widget is hidden, reshown and tested for active window, which
is flaky. Add a call to activateWindow() which increases
the chances of it becoming the active window should another window
appear.
Change-Id: Ibbecdbc43e2ac9638aec497c47fffaaffa1855af
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Pushing the mouse rapidly to the top left corner causes KDE / KWin to
switch to "Present all Windows" (Ctrl+F9) mode, showing all windows.
This has been observed to be triggered programmatically by
QCursor::setPos(0, 0) if there is no other window beneath and apparently
depending on the perceived mouse "speed".
Suppress this by using the bottom right corner for XCB.
Change-Id: Id18d2f45a095ed4d4f365f010cf45a20b0d9435e
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Use the correct parent path for the renamed file when creating
QFileInfo. It must be a path to the parent directory, not to the
root directory of the model.
Modify tst_QFileSystemModel::setData() to test renames in subdirs
of the root directory of the model.
Change-Id: I69d9e3a937616857a81617791ed118af3f6eea05
Task-number: QTBUG-52561
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
