The XCB platform plugin requires several XCB libraries to work. Without
this fix, we get the build error in compileTest only, which is hard to
check.
Change-Id: I6b599f5ad32661e9dc01db11705d702920350cfa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
standard paths should never be added to compiler/linker lines, as they
are likely to mess up the lookup order.
pkg-config does that filtering for us, but the home-grown config tools
don't, so we need to take care of it.
configure.exe does not have such auto-detection, so the change is not
necessary there.
Task-number: QTBUG-26850
Change-Id: I2f523d5cffb27c3d0a16cdef6ca8a4877c9983c0
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This reduces dramatically the command-line for compiling Qt sources.
These are private macros, only to be used by Qt's own modules, so the
compiler setting is either the same or, possibly, better. In other
words, in the worst case, when compiling a module with a better
compiler than for qtbase, such module might not enable all the
functionality it could otherwise do.
If we switch to a buildsystem that can support this properly in the
future, these macros should be removed.
Change-Id: I71f2d12ec98c9dd40eaab9de4a17446bd1066020
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
hard-coding it in unix.conf was no particularly good idea for hopefully
obvious reasons.
the windows version is so far just a stub that does what the makespecs
hard-coded - more doesn't seem worth the effort. the guys interested in
x-building may want to rectify it at some point, but it's not going to
be easy.
Change-Id: I8fedd841a8416f8c0c57018752eae9510b5d00d0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is prompted by the fact that QMAKE_LIBDIR_FLAGS is no longer
honoured by qmake, so we need to use LIBS. It didn't make much sense
to have the flags separate anyway...
Change-Id: Iaec4d58f9dbac25755bbc3bad7550e03edb5332b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this cuts down the enormous duplication of identical command line args
passed to compile.test.
this necessitates the addition of a -config parameter to compile.test,
as QMAKE_CONFIG needs to be extended in some cases.
Change-Id: I677b2fea4a407b9e4395e70a25e4e349efb0a946
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a plugin that bridges the QAccessible world
to AT-SPI 2 on Linux.
Change-Id: I7af22621ee6a3cefc723b137b7f227a611cf6641
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
a module's project file may set MODULE_INSTALL_LIBS before loading
qt_module.prf to have an alternative RPATH linked into the users of that
module.
this is relevant only for linking against non-installed -prefix builds
of that module, as otherwise .libs from the module's pri file is used
for rpath.
Change-Id: Ib240e748cf130a71a5991dc643c368a983092ead
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This fixes a build failure that happens when Qt is configured with
-no-libudev, as reported at https://bugs.gentoo.org/show_bug.cgi?id=430292
Change-Id: I924f023505ab57cca5994f2fd5ff2f8308e61617
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When using [ ] for tests in shell scripts, the ending ] must be a
separate parameter. Otherwise, it won't work. configure was reporting:
configure:5918: ']' expected
Change-Id: I38a843356ee0feb97edb8692a828306821045c77
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
configure will now run qmake without -recursive, as on modern systems
one can get a lot more out of parallelization done by make, which qmake
cannot do.
use -fully-process to get back the old behavior. -dont-process is
unchanged.
Change-Id: I2874321a963175463ae8992f3ab2b01bc13c9922
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
they are an unreadable and unmaintainable mess. the options are properly
documented below.
Change-Id: If2ec683fb7c3740b19798979f8a1f9cd8d84f457
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This option is important if you want to use configure's
and qmake's -sysroot (e.g. PKG_CONFIG settings, device-files),
but the toolchain (in combination with the rootfs)
is not able to handle gcc's --sysroot.
One known case is freescale's ltib setup where the toolchain
itself comes with all the essential files (e.g. crt1.o),
while the rootfs has none of those files, so gcc's
--sysroot can't be used. The rootfs on the other hand contains
all kinds of "less important" files/packages (e.g. libdbus).
For those "less important" files/packages Qt needs pkg-config
to be able to include/link properly. Therefore one needs
configures -sysroot without gcc's --sysroot.
Change-Id: Iaec9b07012f2945f3ecb3ced0ed95176721b5ecd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The arch.test script is now using SDK settings passed to it.
If you install Xcode without the "UNIX Development" option, this
is essential to let the compiler find standard headers and let
the test program compile successfully.
In addition, let configure pass the SDK settings given on the
command line to the arch.test script.
Change-Id: I49601d3068d83a71e21fdbac287857f2b7abedd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In systems where no pkgconfig is available, such as QNX, we set
QT_LFLAGS_SQLITE to the default values.
Change-Id: I24edd589ce7baf2614480a91842ca756ead39463
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The code is exactly the same as what is already done for DirectFB.
Change-Id: I3b84e67a3e999f692da4110f3ac9c82d98b0637c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Tools for each module should be enabled by default.
Prior to qt_parts.prf, they have been enabled by default, but only by
accident - the value of QT_BUILD_PARTS with respect to 'tools' was
generally not respected.
Change-Id: Icd49d6128d4050ff1c865967a563e9ab88c5a3a2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
that way it is actually possible to add additional parts from the qmake
command line.
Change-Id: I42e0b58424292cebafb57538a879204d370397bb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
otherwise we get lots of nasty warning messages about missing pri files.
it is arguable whether it is a good idea to do that, but we preserve
mkspecs/modules, too, and the previously built libraries don't just
vanish, either.
Change-Id: Ieded8d8858f1b0135bc3bea894b4a676024ac8ca
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this makes it unnecessary to dump qmakespec to .qmake.cache and
qmodule.pri.
Task-number: QTBUG-22700
Change-Id: I678c7ee7df2512184b9cd06d7a3be8bbd0b0da15
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
modules other than qtbase also need it.
the windows configure already does it that way.
Change-Id: I9adb469f7a0726663b7939e80d8be1e83a6d12d3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
this will fail now even on unix (and wouldn't have ever worked on
windows), as the full spec name is known only after reading the spec,
and qconfig.pri is read from inside the spec.
matching on the host_build flag is cleaner anyway.
Change-Id: I7da144e89ab3db0fad942d755d8cb0a0f3b85588
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Donald Carr <sirspudd@gmail.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
pkg-config returns glesv2 build flags, which are parsed into a few
variables. However, extra spaces get included in these variables and
quoted, which makes includes paths not work.
This problem can only be hit, if you do not have GL ES 2 headers
installed system-wide, but you do have installed into $prefix, and
pkg-config configured to return the configuration for $prefix. Even
though pkg-config returns correct paths, extra space gets included.
Fix it by parsing the strings returned by pkg-config just like a shell
would parse a command line. pkg-config escapes e.g. spaces, so those
escape sequences need to be interpreted, while doing word-splitting. The
result is a quoted list, as expected in the qmake files.
Done-with: Pekka Paalanen <ppaalanen@gmail.com>
Change-Id: I0593ef7e0606ac5ea80da046e45f86806206951a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The SXE feature was used with Qtopia but is long gone. Clean it up.
Change-Id: I55fba97b6382300ba63e94f3a6c415227f571e37
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The Maemo-specific function have been renamed a bit to prevent them
clashing with the more generic stuff.
Task-number: QTBUG-25865
Change-Id: Id55693159e15d5a0c679546eb48308feb48acac9
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Up until now, we had a mess of different macros used for building
DLLs, for building shared libraries on Unix systems and for building
static libraries. Some of the macros were contradictory and did not
work. From now on, there shall be only:
- QT_STATIC: indicates that it's a static Qt build and the export
macros should expand to empty
- QT_SHARED: indicates that it's a shared / dynamic Qt build and the
export macros should expand to Q_DECL_EXPORT or Q_DECL_IMPORT,
depending on whether the macro corresponds to the current module
being built (the QT_BUILD_XXXX_LIB macro comes from the module's
.pro file)
QT_BOOTSTRAPPED implies QT_STATIC since the bootstrapped tools link
statically to some source code.
QT_STATIC is recorded in qconfig.h by configure when Qt is configured
for static builds. Nothing is recorded for a shared / dynamic build,
so QT_SHARED is implied if nothing is defined. This allows for the
existence of a static_and_shared build: with nothing recorded,
defining QT_STATIC before qglobal.h causes the export macros to be
that of the static form. Linking to the static libraries is out of the
scope of this change (something for the buildsystem and linker to
figure out).
From this commit on, the proper way of declaring the export macros for
a module called QtFoo is:
#ifndef QT_STATIC
# ifdef QT_BUILD_FOO_LIB
# define Q_FOO_EXPORT Q_DECL_EXPORT
# else
# define Q_FOO_EXPORT Q_DECL_IMPORT
# endif
#else
# define Q_FOO_EXPORT
#endif
The type of the Qt build is recorded in QT_CONFIG (in qconfig.pri) so
all Qt modules build by default the same type of library. The keywords
are "static" and "shared", used in both QT_CONFIG and CONFIG. The
previous keyword of "staticlib" is deprecated and should not be used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-April/003172.html
Change-Id: I127896607794795b681c98d08467efd8af49bcf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
they are equivalent to QT_INSTALL_(HEADERS|LIBS)/get.
Change-Id: Ic4b47f3ca7db55785b96f19020a2fa020a8d25bd
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
it only serves to create merge conflicts. the treatment is the same as
for "unclassified" options anyway (they ignore the value, so it can be
"yes" just as well).
Change-Id: I9a75769338b4dc1f58493f1a1f1dd2c2e895290a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we now simply call qmake -r, which is also what we do under windows.
-fast mode is retained for examples and tests, though with moderately
modified semantics (i couldn't be bothered to decipher what the old ones
were supposed to be).
Change-Id: Id2c2d2bed9c8d52ac42f31b388bffc34f4649650
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't mess with the qmake cmdline args any more.
Change-Id: I399d87145d31d25e29951b6acd96387a3c7282f0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
when qmake runs into the new option(host_build) command, it will restart
the project evaluation with a host spec.
the new default host spec is called default-host (gasp!). it is
overridden with the pre-exising -spec / -platform option, while the new
-xspec / -xplatform option overrides the pre-existing default spec.
specifying -spec but not -xspec will set the xspec, too, so the behavior
is backwards-compatible. same for the XQMAKESPEC override read from
.qmake.cache and the environment variable.
the cleaner solution would be adding -hostspec, to be symmetrical with
the override semantics, but that would deviate from configure in turn.
Change-Id: I4297c873780af16ab7928421b434ce0f1d3820da
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This solved QTBUG-26111 in which qtjsbackend gets built with an
incomplete framework on Mac OSX. This was traced back to commit
6a6fd56e66 which moved QMAKE_CONFIG
values from .qmake.cache to mkspecs/qmodule.pri. Since qtjsbackend
contains config tests it creates its own .qmake.cache which was
previously masking this issue.
QMAKE_CONFIG incorrectly contained debug for debug_and_release builds
even though debug and release are already present in the CONFIG variable
in mkspecs/qconfig.pri. The changes to configure prevent CONFIG in
qmodule.pri from containing debug and release variables and ensure
that QT_CONFIG contains build_all and debug_and_release if appropriate.
Configure.app is also adjusted to match this behaviour.
The other part of the change is to qt_module_config.prf and
qt_plugin.prf. These changes take care of populating CONFIG with
the appropriate debug_and_release and build_all variables depending
upon what is present in QT_CONFIG. This ensures that the Qt modules
and plugins get built with the same configuration as qtbase.
The special handling for the qcocoa QPA plugin ensures that it is
built in release mode only to preserve the behaviour introduced by
commit 5603f94eaa.
Task-number: QTBUG-26111
Change-Id: I6f65aba50709e1b2431b8b4411ff30a06f7d8aed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
$VAL just happens to work in resolveDeviceMkspec because it is
set in the parent shell environment when the function is called.
Change-Id: I67350f2a9e790cc7eca2a73ef6a4a0d7f09b8d3c
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Follow-up to 0074cc5d34.
The configure script can be used for cross-building for Windows on
unix.
Change-Id: Ie7f9d0ff308ad5763cdf7b2664fa255e89bd5013
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This is the first step in supporting these checks on Windows.
Change-Id: I77cfd46bd733161ad2e52c2f76a6354b95ff737d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This allows us to have different flags for the compilers for
supporting the same feature. For example, the official flag in GCC to
support AVX2 is -mavx2, but ICC does not support it (yet), requiring
-march=core-avx2 or -xCORE-AVX2. That flag, instead, enables support
for all the features that the "Core-AVX2" processor (codename Haswell)
will support. And clearly, the MSVC flags are different.
Change-Id: I33b6d8617520925e807747180a8dbaafd79b7a9a
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
PLATFORMS is unused. Also remove the loop that printed all the
PLATFORMS when the mkspec couldn't be autodetected. Even if the
PLATFORMS variable was moved up, it wouldn't work anyway since
it detects files and not directories.
Change-Id: Id483c431a179fb01fcf680538e28c81763bc0b90
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
