There should be no need for CMake to add rpaths pointing to
directories outside of the build tree to the installed libraries.
All relevant install rpaths are handled by qt_apply_rpaths().
Change-Id: If554b1e3c790c2bb04a34e8b0524aab3febf5afc
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Allow such a combination
- staging prefix (CMAKE_STAGING_PREFIX / -extprefix) set to the
qtbase build dir
- install prefix (CMAKE_INSTALL_PREFIX / -prefix / on-device prefix) set
to some custom location
even for non-cross builds.
An example would be
configure -prefix /usr \
-extprefix ~/qt/qtbase_build_dir
CMake will put the Qt libraries in the qtbase build dir, ninja install
will not be required, but ultimately in order to run applications,
the Qt libraries are expected to be in /usr.
Support for this scenario was originally added for cross-builds in
062318feb2 , but not desktop builds.
Such a build is useful when you want to have install rpaths different
from where Qt is initially installed to (the staging prefix).
This case doesn't really happen often when targeting desktop
platforms, it's mostly used for cross-compilation (e.g yocto).
Being able to have the same setup with a desktop build is nevertheless
useful for faster iteration on build system issues in such a scenario.
Amends 062318feb2
Pick-to: 6.2 6.3
Change-Id: I42be3628a30025f14eebaf0a79401b54e95cde26
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
After the update to the CMake based build system the ability to
generate pkgconfig files, like it was with QMake, was lost.
This patch adds pkgconfig generation again via a new internal command
named qt_internal_export_pkg_config_file.
The functionality of this command consists in checking if the target
is internal. Then gets the compile definitions. It performs a search
for dependencies that is somewhat similar to
qt_get_direct_module_dependencies, although it won't recurse down for
more deps. Each dependency is then again, checked if it's internal or
has a public interface. Later these deps get deduplicated and lastly
a pkgconfig file is filled.
The resulting pkgconfig files of many of the Qt6 packages were
validated via invocations of `pkg-config --validate` and
`pkg-config --simulate` commands and later used to build local
projects plus tests that use the pkg-config provided details at
compilation time.
Although it has some limitations, with qt_internal_add_qml_module if
it specifies non-public deps these won't be listed and with non-Qt
requirements, notably in static builds, not being appended to the
PkgConfig file.
Task-number: QTBUG-86080
Change-Id: I0690bb3ca729eec328500f227261db9b7e7628f6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Qt6QmlMacros uses the value of GNUInstallDirs's CMAKE_INSTALL_LIBDIR
to calculate the rpath from a Qml plugin's location to the Qt
libraries.
By default CMake detects the value of CMAKE_INSTALL_LIBDIR, and on an
RHEL system it is set to 'lib64', whereas we usually configure Qt with
the lib dir set to just 'lib'. This might cause issues with Qml
plugins not locating the Qt libs due to an incorrect rpath.
Ensure that when building Qt libraries and plugins,
CMAKE_INSTALL_LIBDIR is set to the same lib dir value that Qt was
configured with.
Pick-to: 6.3
Fixes: QTBUG-99707
Task-number: QTBUG-100432
Change-Id: I17b2a22d46ef3b40084a2f6a4992f0e23b35d4d3
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Use IMPORTED_LOCATION of rcc target when generating Android
deployment settings, instead of the hardcoded host path.
Introduce a helper function to find the location of the imported tool
target.
Change-Id: Icfa51ee7a01b3f58fc4892da03055f9ed531cc0b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add a "HURD" CMake platform specification, so it can be properly
checked in the build system.
Set QT_DEFAULT_MKSPEC to the existing hurd-g++ mkspec.
Hurd supports $ORIGIN in RPATH, so enable it.
Hurd uses X11, so add it to the X11_SUPPORTED list.
Enable few more feature checks that apply to Hurd as well: either
because they are provided by GNU libc itself, or because they are
implemented on Hurd.
Check and set the ELF interpreter, as it is a common functionality of
the GNU toolchain.
Change-Id: Id347033560bbc5a2a4e2c3abb493c948c002b40e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This amends commit 0bea727cac or rather
reverts it and applies a different fix for QTBUG-98843.
Use file(WRITE) instead of configure_file or file(CONFIGURE). This
command doesn't have the line endings issues in CMake 3.19 (see
QTBUG-98843). It's not problematic that the .bat file gets a new
timestamp on every configuration step, since we don't add dependencies
on it.
Fixes: QTBUG-99223
Task-number: QTBUG-98843
Change-Id: Ibdcd0e4703bf6df42c6a6d0bb2f35c5144bbe30a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
qt_setup_tool_path.bat did not have proper line endings on Windows with
CMake 3.19, breaking the invocation of tools that use the wrapper, for
example qmltyperegistrar.
The reason was that file(CONFIGURE) doesn't properly write line endings
with CMake 3.19. See upstream issue #21769.
Use configure_file with a proper input file to work around this issue.
Pick-to: 6.2
Fixes: QTBUG-98843
Change-Id: I2a4da15f306dc844cf83ca9721a77196c42af2ad
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And bump NTDDI_VERSION to 0x0A00000B (NTDDI_WIN10_CO) at the same time,
to unblock the developers from accessing the latest Windows APIs.
Pick-to: 6.2
Change-Id: Ifbc28c8f8b073866871685c020301f5f20dc9591
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
file(GENERATE) might fail if an unrelated configuration error happens,
and yet QT_TOOL_COMMAND_WRAPPER_PATH would already be set. Set the
cache variable only if generating was successful and replace the
QT_TOOL_COMMAND_WRAPPER_PATH valiable check with GLOBAL property to
protect the function from double call.
For CMake versions higher than or equal to 3.18 replace 'file(GENERATE'
call with 'file(CONFIGURE' to generate the wrapper at configure time
with the use of a plain semicolon character.
Pick-to: 6.2
Fixes: QTBUG-96870
Change-Id: Icf9c40f571d9c069043604f67ffcf2762966f6d0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This hasn't worked for some time. It's not in our CI and I don't think
it was working at all. When I tried to build it, I ran into several
problems with C++17 and an Internal Compiler Error I did not have any
interest in working around.
After discussing with the Intel compiler team, it was decided that
fixing those issues in the old compiler is not going to happen. Instead,
their recommendation is to adopt the new LLVM-based compiler, which
the last commit added support for.
This commit does not remove qmake support for the old ICC. It's possible
someone is using qmake with a non-Qt6 project and ICC.
Change-Id: Icb2516126f674e7b8bb3fffd16ad6350ddbd49e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The EXE_FLAGS option wasn't being used anywhere in any Qt repo
and it had no documentation as to its intended use. Remove it.
Pick-to: 6.2
Change-Id: I2f67ec57c1da7dc6eab81d5351361e770d19d7d5
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There is no need for this variable to be stored in CMake's cache. We
don't perform expensive operations to set up QT_SYNCQT, and we even
unset the cache variable to ensure it gets recomputed on
reconfiguration.
We still store QT_SYNCQT in a global property, because the function
qt_ensure_sync_qt is called in different directory scopes, and we want
to avoid re-calculations for every subdir.
It's now possible for the user to set QT_SYNCQT (see QTBUG-88088 for
motivation). Also, in a non-prefix build, changes to syncqt.pl in the
source dir are reflected upon re-configuration in the build
tree (because qt_copy_or_install is called on every configure).
Pick-to: 6.2
Fixes: QTBUG-88088
Task-number: QTBUG-75290
Change-Id: I6137b060d200d3dafd4a64d5a6c1bd2549723d78
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since platform definition directory is used as an interface include
path of the Qt::Platform target, it makes sense to define it for this
target only. Also the definition of cached values that contain
path to platform definition looks redundand.
The definition of QT_PLATFORM_DEFINITION_DIR from command line
doesn't make any sense since build procedure doesn't take it into
account when installing mkspecs and the use if the user-provided
QT_PLATFORM_DEFINITION_DIR value as a Qt::Platform include directory
causes inconsistency in the prefixed builds. INSTALL_MKSPECSDIR
and QT_QMAKE_TARGET_MKSPEC should be used instead.
Change-Id: I3636c57b835cb84511a358a0910cc482c5fbd81e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QT_BUILD_DIR should be used instead of CMAKE_BINARY_DIR as a base
directory for platform definition when building a non-prefixed
build since artifacts are copied to qtbase directory for top-level
build.
Amends 478f5fcde6
Pick-to: 6.1 6.2
Task-number: QTBUG-94973
Change-Id: I5cce16fdc7f760b954222ae67a4b85d4beea7f13
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Platform definition directory is defined when building qtbase.
Depending on the build type (prefixed/non-prefixed) it should point:
- To the source directory when building prefixed qtbase.
- To the installation directory of the prefixed qtbase when building
consumer projects.
- To the build directory of non-prefixed qtbase when building
non-prefixed qtbase or consumer projects.
TODO: It is desirable to move the logic asssociated with Qt platform
definition to the qt_internal_setup_public_platform_target function.
Pick-to: 6.1 6.2
Fixes: QTBUG-94973
Change-Id: I8530613f9b2029834c66206bbdf02475528a4640
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If user specifies non-existing platform build fails in some non-obvious
place, since qplatfromdefs.h couldn't be found.
Add an explicit error if the defined platform folder doesn't exists in
Qt sources.
Change-Id: Id847d57a6f9cc4f463e697b474b8a669cd041fb8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Dependency lookup mechanism is the same for modules and plugins. It
makes sense to wrap it using macro.
Pick-to: 6.2
Change-Id: I73727743b0f5f40b2d94624f65ebfcf85e8dcc59
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This makes qt_internal_disable_find_package_global_promotion available,
which is needed when linking against QtMultimedia in a static build
Pick-to: 6.2
Change-Id: I9b8f6d7b74a8693ac471f8a280e893f4da80a44b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qmake had support for building with clang-cl as the win32-clang-msvc mkspec.
Task-number: QTBUG-89642
Task-number: QTBUG-88081
Change-Id: I0709c289f90fedb121620d1e67ef841602219816
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
All repositories define QT_NO_INTERNAL_COMPATIBILITY_FUNCTIONS by now,
and we can remove QtCompatibilityHelpers.cmake altogether.
Change-Id: I4d8104246e96a4514d5651c104607d651d208d95
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce the concept of repository target sets, which is a named set of
targets within a Qt module repository.
In a Qt repository, a repo target set 'qtfoo' can be defined in the
top-level project file with
qt_internal_define_repo_target_set(qtfoo DEPENDS Bar Baz)
The DEPENDS argument specifies Qt components that need to be
find_package'd when building the targets that belong to qtfoo.
In subdirectory project files, use
qt_internal_include_in_repo_target_set(qtfoo) to mark the file as
belonging to the repo target set.
To build and install a single repo target set, specify
QT_BUILD_SINGLE_REPO_TARGET_SET=qtfoo when configuring the Qt
repository.
Change-Id: Ic9e6213e3225988fd561f315bc857ee44ff17420
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Needed for the upcoming static plugin mechanism, where we have to
extract the list of Qt module dependencies of a target and then extract
the plugins associated with those modules.
To do that we need to recursively collect the dependencies of a given
target.
Rename the moved functions to contain the __qt_internal prefix.
Also rename the existing QtPublicTargetsHelpers.cmake into
QtPlatformTargetHelpers.cmake to avoid confusion with the newly
introduced QtPublicTargetHelpers.cmake.
Task-number: QTBUG-92933
Change-Id: I48b5b6a8718a3424f59ca60f11fc9e97a809765d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Extract common static plugin handling functionality into a separate
QtPublicPluginHelpers.cmake file which is loaded by the Qt6 package.
Split the code into smaller functions that will be re-used by each
templated QtPlugins.cmake.in file, rather than copy pasting the same
code into each QtFooPlugins.cmake file.
As a drive-by, handle QtFeatures.cmake and QtFeaturesCommon.cmake
as public helper files just like QtPublicPluginHelpers.cmake.
This makes it clearer that the functions are available outside
the internal Qt build and also provides a way for not dumping new
helper functions into Qt6CoreMacros.cmake.
Task-number: QTBUG-92933
Change-Id: Id816ef009b4fac1cd317d3ef23f21b3530028067
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QT_TOOL_PATH_SETUP_COMMAND is used in COMMAND list when call
add_custom_command/add_custom_target. This is necessary to setup
the necessary environment for the tool to run correctly. This approach
is weak according to CMake documentation:
"If more than one COMMAND is specified they will be executed in
order, but not necessarily composed into a stateful shell or
batch script."
This change introduces the _qt_internal_wrap_tool_command function
that uses a wrapping script that setups necessary environment for
the tool and runs it in a single shell.
The script is generated by the _qt_generate_tool_command_wrapper
function.
Change-Id: Id5270b91619b607a0c1e3a19b8c706edec43f388
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add SOLARIS cmake platform definition.
Add settings for QT_DEFAULT_MKSPEC so that qplatformdefs.h can be found.
Solaris has its gssapi symbols in libgss.
Solaris supports @ORIGIN.
Solaris ld does not support --dynamic-list needed for reduce relocations.
Make solaris fail the reduce relocation test.
getauxval is specific to GNU libc and some other libc implementations on
Linux but sys/auxv.h is not. The bootstrap uses sys/aux.h as the only
indication for getauxval. This breaks builds on Solaris, so only make
sys/auxv.h an indicator for getauxval on linux or glibc based systems.
Solaris uses X11 so add it to the X11_SUPPORTED list.
Solaris network libraries for sockets etc are in socket and nsl.
ifreq does not have a member ifr_ifindex on Solaris, it uses
ifr_index. Add test to check if ifr_index is a member of ifreq.
The first struct in the in_addr union on solaris is defined as four
uint8_t, therefore four arguments are needed for its initializer list.
Change-Id: Ieed4c1bbac8559a7ae1db9c4e1e91f609f150270
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A few configure defines get changed:
QMAKE_WASM_PTHREAD_POOL_SIZE is now QT_WASM_PTHREAD_POOL_SIZE
QMAKE_WASM_TOTAL_MEMORY is now QT_WASM_INITIAL_MEMORY
QMAKE_WASM_SOURCE_MAP_BASE is now QT_WASM_SOURCE_MAP_BASE
device-option EMSCRIPTEN_ASYNCIFY=1 is QT_EMSCRIPTEN_ASYNCIFY=1
To create source maps for debugging. use
device-option QT_WASM_SOURCE_MAP=1
Task-number: QTBUG-78647
Change-Id: If9f30cd7fb408c386d6d69b5f7b1beecf1ab44b5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Remove code duplication by calling qt6_add_plugin() from
qt_internal_add_plugin().
Separate out the public and internal arguments for the
variables defined in QtBuild.cmake for these functions.
Provide them via commands instead for greater robustness.
This separation allows other Qt repos to access the appropriate
set of keywords where they define commands that forward
on to *_add_plugin() in their implementations. Retain
the old variables for now to simplify the integration
steps for updating other repos. The old variables can
be removed once there are no more references left to
them in any repo.
Task-number: QTBUG-88763
Pick-to: 6.1
Change-Id: I0105523afd95995923bd20fc963d245bbb15d34d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Set QT_DEFAULT_MKSPEC for various bsd systems, this is needed to
find qplatformdefs.h when compiling.
Change-Id: I9450193b737930548f32c87be3525c5ecd1e0e13
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Associated changes in the qtdeclarative repo now ensure that arguments
for qml plugins are handled on the calling side. This reduces the
qml-specific logic needed in qtbase and gives qtdeclarative clearer
control over qml build and install locations.
As part of that work, the INSTALL_LOCATION keyword used in
qt_internal_record_rcc_object_files() has been renamed to
INSTALL_DIRECTORY to make it consistent with the keyword used for the
same concept in other commands.
Pick-to: 6.1
Change-Id: Iebd319899f63d79fbe15ce965b84ce324c28a508
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Move the qmake-specific logic of the QLibraryInfo class to
qmake internals. 'qconfig.cpp.in' now stores information about
the library info entries to keep them consistent between qmake
and the Core library. qmake requires specific features enabled
in the Core library, so building qmake will be skipped if the
features are not enabled.
All flags directly related to the qmake have been removed from
Core lib.
Remove all bootstrap related sections from qmake CMakeLists.txt
Task-number: QTBUG-89369
Change-Id: I26de157d3bfd4a5526699296e9d46e1c180b89ae
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Putting each keyword on its own line makes it much easier to read and
improves maintainability. It is friendlier to source control when
keywords need to be added or removed.
This commit introduces no functional change.
Pick-to: 6.1
Change-Id: I79efd039e5afa5f11f1d859405d6487ad6b3beb2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Commit 18fc9e1bf8 introduced a
Windows-only QT_TOOL_PATH_SETUP_COMMAND to make it possible to
call the tool of a module while building the module itself.
The "set PATH=..." command in QT_TOOL_PATH_SETUP_COMMAND was flawed,
because it contained escaped double quotes which made the set command ineffective.
Fix this by removing the escaping of the double quotes.
This was uncovered when porting qtscxml to CMake.
Change-Id: I5909aa841e7895d6d0feb4037a935b805ccfdc99
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In QtSetup.cmake the PROJECT_VERSION_MAJOR variable was used to
identify prefix of 'Qt<version>HostInfoConfig.cmake'.
Qt<version>HostInfo is not found, if project version differs
from qtbase version.
Move the 'INSTALL_CMAKE_NAMESPACE' and 'QT_CMAKE_EXPORT_NAMESPACE'
variables to 'QtBuildInternalsConfig.cmake'. In this case
variables will be exposed for a wider list of internal routines.
Use the 'INSTALL_CMAKE_NAMESPACE' variable as prefix to find
Qt<version>HostInfo module.
Fixes: QTBUG-90345
Change-Id: Ic595d1c5beb74f34e69b58e18590a3afc2f346f7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Move UNICODE and _UNICODE definitions from the public Qt::Platform
target to the private Qt::PlatformCommonInternal target.
Fixes: QTBUG-89951
Change-Id: Ib4c1c4cab74acda0a43c4ddb3cffd3954393dc89
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
If CMake version is 3.19 or greater, use cmake_language(DEFER CALL)
for Qt internal scope finalizers, instead of the homegrown
implementation.
Apart from not depending on the hacky homegrown solution, it
significantly improves the readability of --trace-redirect logs.
Pick-to: 6.0
Task-number: QTBUG-77377
Change-Id: I5ce374bb313865662c536826e86052bc762438b9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
...and include it in QtBuild.cmake.
Commit e8d8b1a5e4 added two different code paths to include
QtBuildInternalsAndroid.cmake.
This was needed, because:
In a top-level build, we must not include files that are not yet
installed. We have the source tree available, and
"${QT_SOURCE_TREE}/cmake" is in CMAKE_MODULE_PATH.
We can use the "module syntax" of the include() command.
In a per-repository build, when building against an installed qtbase, we
must not include files of the source tree, because that's not guaranteed
to be available. However, Qt6BuildInternalsConfig.cmake is installed,
and we can directly include QtBuildInternalsAndroid.cmake, which is
right next to it.
We can circumvent this whole issue by moving the Android-related
functions out of the Qt6BuildInternals package and including it in
QtBuild.cmake.
Pick-to: 6.0
Task-number: QTBUG-88718
Change-Id: I5192ba19bb77952505c20d053d7285f798d16ac5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Updates due to newer compiler version in QNX7.1
Task-number: QTBUG-88300
Change-Id: If9bbc08d49a077d80174a1807e069b5d4ef61c0d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The EntryPoint interface target now contains all the logic
for what flags and optional static libraries to add when the
entrypoint is enabled.
The target property QT_NO_ENTRYPOINT can be used to disable
the entrypoint.
Change-Id: I9b14ff729366cd6307789c969ebd4b2ca19de77d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In multi-config builds (which equals the debug-and-release feature) we
exclude tools of the non-main configurations from the default build.
But we still create installation rules for them. Mark those as optional
to avoid "cmake --install" yielding errors if those tools weren't built.
Fixes: QTBUG-85411
Change-Id: Ic2d3897d1a1c28a715d9a024ec8606fff00e0315
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The value of this variable must be exactly "mkspecs" or end with
"/mkspecs".
Change-Id: I39f83e9660794dfe23f5fd39fb1084b87ba1f140
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For top-level builds it's desirable to have "ninja generate_docs" build
all tools needed to generate the documentation.
This is problematic since the doc-generating targets are created before
the doc tool targets. Thus, we must defer the dependency connection if
the doc tool target is not yet available.
This patch adds the functions qt_internal_defer_dependency and
qt_internal_add_deferred_dependencies.
Change-Id: Ica940b80882e67cb0e0943e95541f7f4d1885948
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add an abstraction over Qt::WinMain (aka qtmain.lib) and
iOS's runtime linker entry point (_qt_main_wrapper).
The Core target will now link against the Startup target on all
platforms, instead of just WinMain on Windows.
The creation and linkage interface definition of the Startup target
is done at find_package(Qt6Core) time via the private call of
_qt_internal_setup_startup_target().
This will add automatic linkage of WinMain to executables marked with
the WIN32_EXECUTABLE property on Windows.
As well as the addition of the '-Wl,-e,_qt_main_wrapper' linker flag
when linking iOS executables.
Qt users can opt out of this behavior by either setting the
QT_NO_LINK_QTMAIN property or variable. This is in line with
Qt 5 behavior.
Task-number: QTBUG-87060
Change-Id: I7d5e9f1be0e402cf8e67e6f55bfd285f9e6b04f4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
As there is no other way of obtaining information about Qt's paths at the
moment, windeployqt is still querying qmake for these information. For a
cross compiled Qt, the proper target mkspec has to be set in this case.
Change-Id: I0b7b7719c9055d432576185ac4f7572a5ba1dd6b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
All usages should be replaced with qt_internal_add_executable instead.
This should fix configuration failure of benchmarks and manual tests.
Amends e0c62a48b8
Task-number: QTBUG-86815
Change-Id: I0791d849998ed9517e32f699d843367949b97cb9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If no mkspec is provided, we default to the macx-clang-ios mkspec when
building for iOS. This ensures that the wrapper qmake script is usable
for building iOS apps with qmake.
Task-number: QTBUG-87218
Change-Id: Ib02b580c8382b04455c9f820163062591d14a15b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
