It seems the value name correction is not needed at all,
and we must not do such correction.
Amends commit 738e05a55a
Task-number: QTBUG-107794
Change-Id: I903a762aafab4b55275beb8438e6769285821567
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
We have done the same thing when calling SetProcessDpiAwareness(),
but it's also needed for SetProcessDpiAwarenessContext(), otherwise
there will always be a warning message when the user uses a manifest
file to set the DPI awareness mode for the application (which is highly
recommended by Microsoft).
Pick-to: 6.4
Change-Id: I31894d41c89581b6edd7826cb3dabad492f6c2a8
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Currently we have a narrow version entry point, add a wide
version entry point as well, make them share exactly the same
implementation. The linker can choose the appropriate entry point
during linking.
The linker will always try to use wWinMain as the entry point
function if the UNICODE/_UNICODE macros are passed to it and
this will cause compilation failures without a wWinMain
implementation. This patch fixes such issue, though it usually
won't happen in most cases.
Change-Id: I7bc22d5bdc1cf35514a335a280a9f18732531b25
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Use the minimum of "len" and "size() - pos", logically we'll only ever
remove characters up-to the end of the array.
This eliminates one if branch, and d->erase() can handle all the use-cases.
After making this change I looked at QByteArray::remove() and it has
similar logic, so it should be correct™.
Change-Id: Ife6c552f8a3f3dda1d5a1da12b80a60790f3bae4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added command line option for passing core5compat module in windeployqt
Task-number: QTBUG-104845
Pick-to: 6.2 6.4
Change-Id: I6a0e13532edac4580e03d83be79f7db4ac54e3bf
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
To make it look more natural (without outline and with proper colors).
Otherwise this thing looks bad in both Aqua and Dark themes -
can be seen if scrollbars always shown (this option is set in "General"
settings).
Tried so far:
- not to draw this element at all - gives a visible hole in the corner
- ask the horizontal bar to render its knob track a bit longer (resetting
a clip properly) - gives a weird side-effect when scrolling in Dark
mode + unfortunately outline of a track is still visible (it overlaps
the vertical bar's track).
Alas, good old hardcoded colors/alpha values as a last resort.
PE_Frame had -1,-1 adjustment, making a frame line visible in the
corner below scrollbars, giving another strange effect.
Fixes: QTBUG-106927
Change-Id: Ie0367c3bd6f40b3fa4ca6afac09f27e446fc007d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Some modules may have header files that do not pass headersclean check
under some conditions. It's nice to have an option in the
qt_internal_add_module function to disable the check for the modules of
this kind. At the moment this flag is useful for the ActiveQt module,
since it syncs and installs header files that don't belong to it.
Amends b89d63515b
Task-number: QTBUG-103196
Change-Id: I21a82d50d50bdac225ed483ab0cc50339c2a4873
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since QtAutoDetect is called before the project, we still don't have
access to our IOS, WATCHOS, TVOS variables, and we must use
CMAKE_SYSTEM_NAME variable instead.
Pick-to: 6.4
Change-Id: I61afe216baec85b3fcd489957f4b6774134f8078
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It doesn't like 0x80 passed to a char, causing a warning
qstringconverter.cpp(196): warning C4309: 'argument': truncation of constant value
Pick-to: 6.2 6.4
Change-Id: I07ec23f3cb174fb197c3fffd17215b6f83476ebf
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Update Theme's style according to current UiMode.
New style.json file for dark mode was added (stored in separate
subdirectory 'darkUiMode/'). Theme_DeviceDefault_DayNight[0] is used for
extraction for API 29 or higher. Style is updated each time when UiMode
is changed.
[0]https://developer.android.com/reference/android/R.style#Theme_DeviceDefault_DayNight
Task-number: QTBUG-83185
Pick-to: 6.4 6.2
Change-Id: Id26059231f41761d822d494ac6c641bf3cba3322
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
In addition, I simplified some of the routines as we don't need the
extra check for them.
Task-number: QTBUG-107903
Pick-to: 6.4
Change-Id: Idaf6ab1338a54bc1a9f242fcc8400ae200174beb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Based on the discussion on logging style in the
Gerrit change for commit
5145d3899d
("a11y atspi: Support AT-SPI table cell interface"),
clean up the logging in AtSpiAdaptor a bit:
* convert uses of qCDebug to qCWarning where the
log message contained "WARNING"/"warning"
or it seems worth that severity.
* drop extra prefixes of "Qt AtSpiAdaptor:"
in the log messages, since the logging
category is already named "qt.accessibility.atspi"
and only used here
* more consistently start log messages with
uppercase letter and drop unnecessary extra spaces
The switch to qCWarning implies that these log
messages are output by default.
Change-Id: I1665a8ee8d64e4eab33a3b15906a7cb7357fd73c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's not in 6.4.0, but realistically people who look at the docs now
will be using 6.4.(x>0).
Change-Id: If176c0daee11a6cc13d64255e398f767896f01a4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If the last pipeline had a different stencil (write) mask, that
would affect the clear. That is not ideal.
Exercised by the upcoming stenciloutline manual tests.
Pick-to: 6.4 6.2
Change-Id: I925e85a2b7fb884e5ae9ed327b4b05c9bf36484b
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
- Extending QtNative.java with access to DisplayManager and get
details about available displays
- Extending Android Platform Integration with display's list
handling
- Change QAndroidPlatformScreen to initialize itself from QJniObject
representation of an android Display object
- Move initialization of Primary display from QAndroidPlatformScreen
to QAndroidPlatformIntegration
Change-Id: I3d8f97f5cf9f81bbecc8716c25ff323097e57a15
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This amends 23780891a5 which moved the.txt
test to tets/auto/corelib/platform/android and kept the old location
mistakenly.
Pick-to: 6.4 6.2
Change-Id: If58422f9a94cfe4d6a941cc5453d8f0506057dcb
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
MinGW-clang gives warning(-as-error) because the overridden function
which is there shadows the other overload, making it inaccessible.
Pick-to: 6.4 6.2
Change-Id: Ie5684b60a13d71966b9741fcfcdacbd37fe0df85
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When we say 'this feature', it can be misunderstood to mean
the subject of discussion in the immediately preceding paragraph.
Pick-to: 6.4 6.2
Fixes: QTBUG-107720
Change-Id: I726c7a591f01e59c3c36c802abeb17b51abf0777
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
A case where the accessing the clipboard is done when the application
does not have the input focus. Android does not allow access in this
case and returns null on the getPrimaryClip. This happens on some
examples like Analog Clock. Does not happen on autotests.
Fix was adding a test for null.
Fixes: QTBUG-107926
Change-Id: I685594545e5ae8102c257c033fffbcc4f20cef9a
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
In bootstrap mode, we don't build qsimd.cpp and don't check for CPU
features, but specifying -maes in the compiler command-line can still
enable the AES hash support in qhash.cpp. This has probably been broken
since Qt 6.4 with commit 4be85491e0.
qhash.cpp:(.rdata$.refptr.qt_cpu_features[.refptr.qt_cpu_features]+0x0): undefined reference to `qt_cpu_features'
Pick-to: 6.4
Change-Id: I07ec23f3cb174fb197c3fffd17216241cfd1ab19
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Removes a warning in the build.
Pick-to: 6.4
Change-Id: I07ec23f3cb174fb197c3fffd17215c40b40333cb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QSystemLocale is now defined for QT_NO_SYSTEMLOCALE builds (bootstrap),
but no implementation will be present. That's just to get the enum
declarations.
Pick-to: 6.4
Change-Id: I3c79b7e08fa346988dfefffd171fa00fde8ab080
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
I don't think I understood what this does when I coded it. It wasn't
needed with the Linux kernels of the era.
[ChangeLog][QtTest] Specifying attributes with the -perfcounter command-
line option for Linux performance counters is deprecated. QtTest will
ignore the colon and any attributes listed there, though future versions
of QtTest may reintroduce attributes if needed.
Change-Id: I3c79b7e08fa346988dfefffd17202684fc2cf650
Reviewed-by: David Faure <david.faure@kdab.com>
The kernel has become more paranoid since 2013, when I originally wrote
this code. The kernel.perf_event_paranoid sysctl controls the paranoia
level[1]:
=== ==================================================================
-1 Allow use of (almost) all events by all users.
Ignore mlock limit after perf_event_mlock_kb without
``CAP_IPC_LOCK``.
>=0 Disallow ftrace function tracepoint by users without
``CAP_PERFMON``.
Disallow raw tracepoint access by users without ``CAP_PERFMON``.
>=1 Disallow CPU event access by users without ``CAP_PERFMON``.
>=2 Disallow kernel profiling by users without ``CAP_PERFMON``.
=== ==================================================================
Since the default is 2, we QBenchlib has been failing with EACCESS:
PASS : tst_MyClass::initTestCase()
QBenchmarkPerfEventsMeasurer::start: perf_event_open: Permission denied
[ChangeLog][QtTest] Fixed support of Linux performance counters for
QBENCHMARK, which used to fail with "Permission denied" errors in
default configurations. Now, QtTest will automatically fall back to
profiling only userspace, like the perf(1) tool does.
[1] https://github.com/torvalds/linux/blob/master/Documentation/admin-guide/sysctl/kernel.rst#perf-event-paranoid
Pick-to: 5.15 6.2 6.4
Change-Id: I3c79b7e08fa346988dfefffd171f897be7794935
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Each module now identifies its actions during the configuration by a
prefix, e.g., `[QtBase]`. In addition,
- I have slightly modified some of the `message()` commands to get
a more coherent output.
- `syncqt.cpp` prints its output as WARNING if any
Change-Id: I3922d75a668d94f402068f4121751b7fcb6522b4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Just to make sure it is not broken and will not break.
Change-Id: I947f8225027d6b6744eb8b774058b7e4d923b61d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pick-to: 6.4
Change-Id: I9504b41b743b9874fcc6324d98b66a9c5160e845
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The purpose of warming up is to get all code paths executed, so any lazy
function resolving is processed, statics are allocated, etc. There's no
reason to run it more than once -- if you're trying to train the Branch
Predictor Unit, you'd want to do it another way anyway. This is useful
when benchmarking with -iterations N, because QBenchlib currently runs
2*N iterations because of the warm up. That just wastes time.
Change-Id: I3c79b7e08fa346988dfefffd172030c889b31a1f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
From CMake 3.7 both flavors of `cmake_parse_arguments` are natively
available in CMake, and loading the
`CMakeParseArguments` module is not needed anymore.
Fixes: QTBUG-107574
Pick-to: 6.4
Change-Id: I7c8a6c5871cdb2f92a4aa43932b6f2ee99e1f57f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
As stated in `QtBuildInternalsConfig.cmake`, `cmake_minimum_required`
versions should be synced with `qtbase/.cmake.conf`, but it wasn't at
the moment.
Change-Id: I8100370778707d46abe973b681fd4aba182a7513
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Avoid using top-level ${target} variable in the function. Align the
module's '_header_check_exceptions' file name, so it should use
_qt_module_interface_name property, but not the qt_module_include_name
proeprty as the prefix.
Amends b89d63515b
Task-number: QTBUG-87480
Change-Id: I1a3ceee1a29f2f4a7cb727310b4fdac63d8144e1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building Android multi-ABI application in source tree the
ExternalProject_Add call generates a ninja rule that looks as
follows:
cd <BINARY_DIR> && cmake <CMAKE_ARGS> <SOURCE_DIR>
In general case the rule works correctly unless SOURCE_DIR contains
CMakeCache.txt. In this case the cmake call uses the existing
CMakeCache.txt as the reference and tries to reuse the build directory
of the main ABI. It leads to the inconsistency for multi-ABI builds
and rewriting CMakeCache.txt. Passing both '-B' and '-S' arguments
explicitly avoids using CMakeCache.txt from a main build/source
directory and fixes in-source multi-ABI builds.
Fixes: QTBUG-107843
Pick-to: 6.4
Change-Id: I010b47bff81052401aebe459e7893838a9b99bc1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
MinGW-clang warns(-as-error) that the overridden functions are not
marked noexcept like in the original class.
Pick-to: 6.4 6.2
Change-Id: I7c5663b82e0f4449e27fd3842f7b37015fd5f4ea
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Adds a consteval QPropertyBindingSourceLocation::fromStdSourceLocation
to make sure the QPropertyBindingSourceLocation is created at compile
time.
This is a workaround for what seem to be bugs in MSVC 2019 and 2022,
which otherwise don't regard
QPropertyBindingSourceLocation(std::source_location::current()) as a
constant expression.
Fixes: QTBUG-106277
Pick-to: 6.4 6.2
Change-Id: Ic2379987b278cc0c43c1eb929120c99f5cd95fdf
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The `rcc_PREFIX` will be set to `/` if it is not passed to the
function and it is not defined in `QT_RESOURCE_PREFIX`.
I also removed an unnecessary check of the `rcc_PREFIX`.
[ChangeLog][QtCore][CMake] The `PREFIX` parameter of the
`qt_add_resources` is now optional. If not passed, and
`QT_RESOURCE_PREFIX` is not defined, `/` will be used as the path
prefix.
Fixes: QTBUG-104938
Change-Id: I6524ab5dc54f035272e4c2e3154eb67591efb650
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
With -no-feature-sql, CMake would error out because the target Qt6::Sql
didn't exist. Fix this by checking if the target exists.
Task-number: QTBUG-102480
Pick-to: 6.2 6.3 6.4
Change-Id: I411631acfd336ea699833954f86711067d160c04
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
While the strlen() calls don't raise warnings themselves, it seems like
they were artifacts of indexOf() returning int instead of qsizetype.
Task-number: QTBUG-103527
Pick-to: 6.2 6.4
Change-Id: I32fbf69feca38a5977dde084bef9993f24843ccf
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Recent versions of Emscripten may abort if module_property()
is used to look up specialHTMLTargets, which makes run-time
checking impossible. The abort is implemented on the JS property
getter on the Module object, which means that it's not possible
to bypass this by using e.g. EM_ASM instead of the C++ API.
Disable usage of specialHTMLTargets on emsdk > 3.1.14 for now,
until we can add API (or find some other means) for opting in.
This commit also adds functions for comparing Emscripten
versions.
Pick-to: 6.4
Change-Id: Ibe5d1a82f267fa95dd62cdfc66595bc23036933f
Reviewed-by: Aleksandr Reviakin <aleksandr.reviakin@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Move install paths from CoreConfigExtras.cmake to a separate file
for the easier usage. This specifically can be useful to detect
read required paths for android deployment in multi-ABI builds.
Change-Id: Iacdf3a8d3ae7615ac6669a067e6f12bdf5043d5a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Many applications offer shortcuts for quick interaction with the
application. It is also common in such applications to offer a shortcut
editor in the preferences or separately in a dialog.
However, even though this is a fairly common use case for applications
with more than a couple of shortcuts, there is no good and comprehensive
official Qt example how this could be achieved.
This change is an attempt to bridge the gap.
Change-Id: Ic01a404e6157bda1b0a75a0b792cbfe5d910d48f
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
All *deployqt tools are user-facing and should have a versioned link in
the installation prefix.
Change-Id: I26dde529657da0a68401e4fd721926d9978eb879
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
