The DEFINES -= QT_NO_LINKED_LIST is no longer needed, so just remove it
from .pro and CMakeLists.txt.
Handle $$[QT_INSTALL_TESTS] and $$TARGET in target.path.
When we have DESTDIR set, do not use target.path for OUTPUT_DIRECTORY.
Fixes: QTBUG-78219
Change-Id: I5161a955b25ff2f3b35428dc4b935a7c9d2d425b
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Change-Id: Idcd5d1be7503b50a43954c1b209e48a32cc8eaa9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This fixes the qatomicinteger magic by making $$basename work for one
particular case.
qthreadstorage still needs investigation.
Task-number: QTBUG-78221
Change-Id: I7bb38f6ca24273bcf0443ab25685c8e815814c3c
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is needed to make sure the output directory is in the correct
place somewhere under tests, rather than in $prefix/bin.
Change-Id: I98afa9c0a7517a8a10866b4c626bd4c4d2fd214f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
With a few special cases to make the tests pass.
Biggest one is the qlockfile_test_helper.
Also a few tests have some problems and have not been
ported yet: qfileselector, qresourceengine, qprocess.
Change-Id: I91a5210b13e7a0697774d909449a71f46af0a0ba
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Rename the alias property used by add_qt_resource() to QT_RESOURCE_ALIAS
to match property naming conventions.
Change-Id: I97b12b0b794e158f03dabeed5ec23a3b7d56cfbb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Only qdir, qlockfile, qprocess and qresourceengine were manually
disabled, otherwise all other builds fine on linux.
Change-Id: I09fd0ffffb778057d6bf9c25cad1fcd73fb7e530
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This change makes the PREFIX parameter a required parameter if the
target does not specify a default. This way the behavior is clear when
reading the code: add_qt_resource() without PREFIX means it must come
frmo the target.
Change-Id: I79024e70e7b4d32a5164b93aa08ec9ff409b2d39
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
This show cases the new cleaner subdirs handling code in
pro2cmake.
Change-Id: I25001942ef020e4c4191b355f55309c4fb033ecc
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Makes the conditions nicer to look at.
Change-Id: If07b4f96892e459a7e7a6a4f541311ebda11b1a8
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
If unset QT by default has value: "core gui". This patch adds this
behavior by pre-defining the value in the root scope.
qmimedata CMakeList.txt was re-generated.
Change-Id: Ib8b6064bc46c72d829e0077d09f21bbfb494e137
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
CMake doesn't support removing subdirectories therefore one need to
convert all removal to conditional adds. The resulting code doesn't
win a beauty contest. That is because handle_subdir works on already
processed strings which means it doesn't have access to the boolean
operations. As such it can not minimize the expressions, but it works
and in the most simple cases it is pretty good.
The patch re-generates CMakeLists.txt under tests/auto/corelib/kernel
excluding qcoreapplication, qmetatype, qmimedata, qobject, qtimer,
which are suffering from unrelated problems, like for example Gui,
pthread linkage issues.
Change-Id: I18a02f6eda7a3b41b1313211c8bc9ce277bb67be
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Somehow missed these during my first iteration.
Change-Id: Iaef0ab84d9320a98f49ec071c93cd6f2907d92c3
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
This change removes the leftovers form other cleanup commits.
Task-number: QTBUG-76491
Change-Id: I61440f87c5a280f9666b78e19aac4d8ac603767e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Commit 8010e906d3 accidentally ended up
removing the removal-on-undefined-insertion check by calling insertAt
instead of insert, which had it. This patch moves the check back into
setValueAt.
Change-Id: Ic381e284d3da37e31c4eb29f79dfab9c55c2e3e9
Fixes: QTBUG-77204
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QT_SOURCE_TREE is a variable that is set in qtbase/.qmake.conf.
In qtbase, it's used throughout various
projects to find cpp sources when building standalone tests (among
other things).
Everything works fine with qmake, because even if qmake is invoked
on the tests subfolder, qmake searches up the source directory tree
until it finds a .qmake.conf file, and uses that.
When building qttools with qmake, the qdoc project expects
to have a QT_SOURCE_TREE value, but it's not actually set in the
qttools/.qmake.conf file, so the generated include paths that use
that value are incorrect. Curiously the build still succeeds.
Now in CMake land we replaced QT_SOURCE_TREE with
CMAKE_SOURCE_DIR, but that does not work properly when doing a
standalone tests build, because the project in that case is the
tests one, and not the qtbase one, so configuration fails in a
developer build when trying to configure some private tests.
So far I've found that only qtbase actively uses this value.
A temporary fix is to save the qtbase source directory into a
QT_SOURCE_TREE variable inside the generated
BuildInternalsExtra.cmake file.
The pro2cmake script is changed to handle presence of QT_SOURCE_TREE
in a qrc file path. This is handled by finding the location of a
.qmake.conf file starting from the project file absolute path.
This is needed to stop the script from crashing when handling
the mimedatabase test projects for example.
The change also regenerates the relevant failing test projects, and
thus standalone tests (when doing developer builds aka private_tests
enabled) now configure and build successfully.
Change-Id: I15adc6f4ab6e3056c43ed850196204e2229c4d98
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Now that all our supported compilers know char16_t, we no longer need
QStringViewLiteral, whose only purpose in life was to turn u"" into
L"" for MSVC < 2015.
Change-Id: I25a094fe7992d9d5dbeb4a524d9e99e043dcb8ce
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Also optimized the existing QL1S overload of non-const operator[](), and
applied Extract Method refactoring to the other existing QL1S overloads.
[ChangeLog][QtCore][QJsonObject] Added insert(), remove(), and take()
overloads taking QLatin1String.
Change-Id: I5e737cf2d7d9ffb325d6981db1e4a6a9f093657b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
[ChangeLog][QtCore][JSON] Added overloads of functions taking key
strings as QStringView; in QJsonObject, QJsonValue and QJsonDocument.
Change-Id: I78b40aba8200003acfae257ff06f5f15737005e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
When successfully finishing a parse, it's reasonable to expect that the
QIODevice was advanced to the end of the input data.
[ChangeLog][QtCore][QCborStreamReader] Fixed a bug that caused the
QIODevice that the data was being read from not to show the entire CBOR
message as consumed. This allows the user to consume data that may
follow the CBOR payload.
Fixes: QTBUG-77076
Change-Id: I1024ee42da0c4323953afffd15b23f5d8fcc6f50
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
We have to treat the resources from mimetypes in corelibs specially
as they are reused for two test cases. Since we no longer use the qrc
files, we have wrapped the relevant code in a function that can be
called for every target that depends on it.
This change also corrects formatting for the generate CMake code
regarding resource commands.
Change-Id: I50a05c81151d75aefc9ca165f5ffeb9f5cd77162
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Applications might receive paths with Windows' '\\?\' markers, which
indicates a long path to Win32 APIs, when the application is opened by
explorer via file association. Qt not ignoring those markers will fail
to open such files.
By stripping the marker in QDir::fromNativeSeparators, QFile, QFileInfo
etc automatically are able to handle such paths. QDir::cleanPath is
also documented to normalize separators, so it needs to be done there
as well.
[ChangeLog][QtCore][QDir] Remove Windows specific long path markers
when handling file paths with native separators.
Change-Id: I526a890614edee8c85b39fc12c98e7ddb6e0d793
Fixes: QTBUG-75117
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Current codebases assume isCompressed() implies ZlibCompression, since
there was no compressionAlgorithm() getter. In order to force codebases
to change, deprecate isCompressed() and force handling of the algorithm.
The replacement API is being introduced in 5.14, which is why the
warning is being emitted in 5.15 only.
Change-Id: Ief874765cd7b43798de3fffd15a9f5d978951ea5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Windows has a problem relating to cross-DLL variable relocations: they
are not supported. Since QMetaObject's link to the parent class is done
via a pointer, every QMetaObject in a DLL or in the EXE that derives
from a class from another DLL (such as QObject) will be dynamically
initialized.
This commit changes the meta object pointers in QMetaObject::d from raw
pointers to a wrapper class SuperData, which is almost entirely source-
compatible with the pointer itself. On all systems except for Windows
with Qt 6, it's binary compatible with the current implementation.
But for Windows with Qt 6, this commit will store both the raw pointer
and a pointer to a function that returns the QMetaObject, with one of
them non-null only. For all meta objects constructed by moc, we store
the function pointer, which allows the staticMetaObject to be statically
intialized. For dynamic meta objects (QMetaObjectBuilder, QtDBus, QtQml,
ActiveQt), we'll store the actual raw pointer.
[ChangeLog][QtCore][QMetaObject] Some internal members of the
QMetaObject class have changed types. Those members are not public API
and thus should not cause source incompatibilities.
The macro QT_NO_DATA_RELOCATION existed in Qt 4 but was called
Q_NO_DATA_RELOCATION and only applied to Symbian. It was removed in
commit 24a72c4efa ("qglobal: Remove
symbian specific features").
Task-number: QTBUG-38876
Fixes: QTBUG-69963
Change-Id: Id92f4a61915b49ddaee6fffd14ae1cf615525e92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Caused by commit 01301b0b34, which made
vector.resize(vector.size()) not to detach, which was used by fill() and
assumed that detaching happened. The test does not test the resize()
behavior, only that fill() is not broken anymore.
[ChangeLog][QtCore][QVector] Fixed a regression that caused fill() not
to detach, corrupting shared copies.
Fixes: QTBUG-77058
Change-Id: I6aed4df6a12e43c3ac8efffd15b1b527a8007bf3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Don't call realloc() with all its machinery when we know exactly what
to do: destroy the last element and decrease the size by one.
Extend the test, removing the unused Foo class for a new Tracker one.
Change-Id: I568eef4f6335669689fb16fd23af92cb4d6464bd
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
- Replaced the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Change-Id: Ic38245015377fc0c8127eb5458c184ffd4b450f1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QLinkedList is still used in several tests. Add exceptions for
these subdirs.
Change-Id: I50ccd2a0892129d4a47aa4e2400211690da9a82d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There's like three pages of this when compiling the test :)
Change-Id: I923f2c4f5eff7c709977026666cc5b2a2cbfaa72
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The call to QFileDevice::unsetError() in QSaveFile::open() does
not clear QSaveFilePrivate::writeError. Clear it in addition.
Fixes: QTBUG-77007
Change-Id: I5e5009750f1726d1c74c1b4eb1c33f3a5393fe4f
Reviewed-by: David Faure <david.faure@kdab.com>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Some compilers (hello, MSVC) do not produce literal types in Qt
because their constexpr support has been blacklisted.
Therefore, amend the check for literal types in Q_ARRAY_LITERAL:
only do the check if the compiler supports constexpr.
Change-Id: I7cffe00dde447d975aa6a7d02248df9c351508ff
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
In all of these cases, the effect of the change is local to one file.
Change-Id: I3bda3aadee3b42e7797183c2330183390b92d1f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the recursive mutex use case out of QMutex into a separate class,
unsurprisingly called QRecursiveMutex. As an immediate benefit, 90% of
the QMutex users now enjoy a constexpr QMutex ctor.
This change prepares for a real split in Qt 6, so that both use-cases
are no longer bundled up in one class.
[ChangeLog][QtCore][QMutex] Added QRecursiveMutex as a replacement of
QMutex(QMutex::Recursive).
Change-Id: I79b8724e8a8ee65e4bd0f06acd76103fe4197b8c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
