Remove previously defined insignificant test flag as the number of
tests failing has been reduced.
Task-number: QTBUG-24406
Task-number: QTBUG-23058
Change-Id: I01b41f30469cf7a440e21195e105cb30a8db76e2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QFINDTESTDATA to locate the helper applications.
Change-Id: I604d10e37c9367f2e95225864edf5bf705f1d961
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The tab key behavior in Qt5 no longer respects the "Text boxes and lists
only" tab navigation option in OSX, which is the default. This is a
regression since Qt4.
Task-number: QTBUG-24372
Change-Id: I54c1663f8fb259dd847083432102a0bfad7dd69c
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
- Made test depend on subprogram
- added install of subprogram
Change-Id: Ib263e9e75ed3c900b52fb1c9b6d319e71d19bdbb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test was written incorrectly in a way which happened to allow it to
pass most of the time (but not all the time).
Reset the state of test objects between each test function, and mark the
broken functions with QEXPECT_FAIL and a link to a task.
Replace the unusual WaitForPinger construct with the usual
QTRY_VERIFY/QTRY_COMPARE method of verifying asynchronous operations.
Task-number: QTBUG-24262
Change-Id: I82d09002307c0b500bf60cd5b583674321b37609
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They create noise in the test results.
Change-Id: I40e7239ba7cd41bec577fe8220c86476553a6502
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Change-Id: I70c324e6fcfd2bba3ab44837c5ce2c007de8896f
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Many (most?) strings written aren't in fact UTF-8, and we can check at
compile-time which are and which aren't, so don't hard-code fromUtf8()
but use the much more efficient QStringLiteral() where applicable.
This is low-hanging fruit. This patch only optimises US-ASCII string
literals, not those that are latin-1 or even UTF-8, because that would
require more extensive changes to the original fixString() function.
Likewise, there are also other calls to QString::fromUtf8() being
generated (e.g. in the pixmap code) that could benefit from being
turned into QStringLiterals, but their code paths are more involved
than those this patch fixes.
This patch at least suffices in turning all the setObjectName()
arguments into QStringLiterals, which was the main goal.
The autotest baseline has been updated with the new expected results.
Change-Id: Ic1ef67f500f9ff92d36164d515f4e004ef2a10bc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This function provides a proper way of determining whether a function
returned by QMetaObject::method() is valid. (Checking whether
signature() returns a 0 pointer, which e.g. testlib does, is not an
ideal API -- especially given that signature() will soon be removed
and replaced by a function that returns a QByteArray.)
Change-Id: I644f476b09904925f2042945f5d0ad744482b682
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The helper functions contained QSKIP macros which do not also skip their
parent function. These QSKIP function were removed and replaced with a
return success value.
Change-Id: I533f57842fc95beaeb1fcde5235678e9807db056
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This autotest seems to be caught in an event loop preventing further
correct signalling. Mark test function skipped with QSKIP.
Task-number: QTBUG-24374
Change-Id: Ic943a33b71fa87d0873278cb7b7b134c22602be3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For shadow builds where "make install" had not been run, the
tst_QLocale::emptyCtor test function would fail to find its helper
application because QFINDTESTDATA was not searching for it in the build
directory due to the test not instantiating QCoreApplication.
This commit fixes the test by instantiating a QCoreApplication using the
QTEST_MAIN macro, which also allows some special case code for Windows
CE to be removed.
Change-Id: Ic81d4699da2538c24b36b3d6bd52c4a02ad417f4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Prior to this commit, a benchmark test could report 0..n passes and 0..m
fails or skips, where n is the number of accumulation iterations used to
collect benchmark data and m is the number of times the test function
was invoked. Depending on the type of benchmark measurer being used,
this could result in a very large volume of test output and inconsistent
pass, fail and skip counts between test runs.
This commit changes the behaviour so that each benchmark test reports
one pass, fail or skip, regardless of the number of iterations used to
collect benchmark data.
This commit also prevents benchmark data being reported in the test
output if the benchmark test failed or skipped, as any benchmark data is
of dubious value in such cases.
The latter change in behaviour requires a minor modification to the
badxml selftest, which now tests quoting of literal strings in xml test
output for both passing and failing benchmarks.
Finally, this commit also adds a new selftest specifically for verifying
correct behaviour for benchmarks that fail or skip.
Task-number: QTBUG-24313
Change-Id: I3426dc659a7511b62fd183a031c7235bc753f497
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Made test depend on subprogram to make sure it was there when
test ran.
- install signalbug subprogram
Change-Id: Ie0a19e52d131adcd17c97b263389aecffb81520e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Prior to this commit, when an unexpected pass occurred the test output
showed the message "XPASS : tst_foo::function() 'expr' returned FALSE",
where the problem was actually that the expression evaluated to true
when it was expected to be false.
This commit changes the output to make it clear that the expression
evaluated to true unexpectedly.
Task-number: QTBUG-22118
Change-Id: Id22c178073d3b75789675ca37a8ef019029b1f91
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reduce the thread and iteration counts to make this test execute faster.
This change reduces the runtime to 14 seconds (from 5 minutes, 38
seconds).
Change-Id: Id5ea056cfd33022da5a06809f0598a5cdb02b27b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
History of the development before the import:
ssh://codereview.qt-project.org/playground/mimetypes.git
Mimetype definitions come from shared-mime-info where available (UNIX systems),
loaded using a mmap'ed binary cache generated by update-mime-database.
As a fallback if no cache is found, we parse the raw XML files otherwise.
This makes the MIME type support fast and with very low memory usage on UNIX,
and it makes it easy to use on Windows (no dependency on shared-mime-info,
Qt even includes a freedesktop.xml file to use if none are found on the system).
Change-Id: I27b05008216ff936dc463bd80d3893422bfb940e
Reviewed-by: Richard J. Moore <rich@kde.org>
Emit changed signal only if the clipboard is not owned,
in which case QClipboard does it.
Task-number: QTBUG-24184
Change-Id: I27420583a718a5f8cd93b9d361b1e422a75df300
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
- Save & Restore style and geometry when switching to
full screen and back since it is not a real state on
Windows.
- Obey the positioning policy in setGeometry.
Task-number: QTBUG-24185
Change-Id: I18dea4fd372e0b2e46273a7a27e0c6f4f4bde771
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
QNetworkAccessManager was ignoring the supplied credentials, although
webkit seems to support these urls at a higher level.
Following the behaviour of browsers:
We use supplied credentials if authentication is required.
We add supplied credentials to the authentication cache.
We emit authenticationRequired signal if the credentials were wrong.
We do not use previously cached credentials for that url
Synchronous http requests fail, if the credentials were wrong.
Task-number: QTBUG-18107
Change-Id: If46e8eab1511ba8a0f4bbe0d4efaabc4df0b8ab4
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Marked a bunch of tests insignificant, and skipped one crashing test
case in QApplication test, as that couldn't be made to pass simply by
marking the test insignificant.
Once the underlying issues are fixed, the tests need to be re-enabled.
Task-number: QTBUG-24203
Change-Id: I9aea4fa207d307793445efdcaead72219fbf6c4f
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
A number of network autotests are unstable in Windows, so don't
generate check target for them as is done for mac.
Once the tests are acceptably stable, this needs to be reverted.
Change-Id: I18262e28ce40eba541aecf3cfb651bff34698ead
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This is similar to the focusColors() failures in QTBUG-23686.
Task-number: QTBUG-23686
Change-Id: I1f01a4e41e61a7a664309be34cfa4fe916a92b15
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test fails intermittently, and at random locations.
Task-number: QTBUG-24322
Change-Id: Ied6dd4d1593066debc0fb48c6ca2a17a1f4d51b7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
All of these tests currently hang.
Task-number: QTBUG-24321
Change-Id: I7664b57f6539d4c03008701da66e193019a4440a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
tst_QColorDialog::native_activeModalWidget() hangs, so skip this test.
tst_QColorDialog::task247349_alpha() fails, so XFAIL this failure.
Task-number: QTBUG-24320
Change-Id: Ie4d69e07063e9a648ec4fa3337274143a52ea3e3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The first block of tst_QApplication::quitOnLastWindowClosed() hangs
on Mac OS X, so skip that block for now.
tst_QApplication::testDeleteLAter() both hangs and fails on Mac OS X,
so skip the test and XFAIL the failure.
Task-number: QTBUG-24318
Task-number: QTBUG-24319
Change-Id: Ice11292d84e63215f1bb9e03f3ef369943d1d887
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The default constructor for QSettings does not set NoAccess status, even
if the organization domain, organization name, and application name are
empty. Instead of trying to fix QSettings, keep the existing behavior,
and test for it.
Failures from tst_QSettings no longer need to be ignored, so
mac:CONFIG+=insignificant_test has been removed from the .pro file.
Task-number: QTBUG-22745
Change-Id: Ic9f8b6821c483c217e1ef2ece704be2da169e340
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
- Move palette() from deprecated QtWidgets/QGuiPlatformPlugin
to QtGui/QPlatformTheme, Make it return a const * since
QPalette does not have isNull().
- Initialize QGuiApplication::palette() and
QApplication::systemPalette() from it.
- Do not initialize QPalette from QGuiApplication::palette()
unless app_pal is non-null (default to Qt::black if it is 0).
This avoids initialization order crashes/recursions in the
QPA plugin. Streamline initialization function.
- Remove styleName(), systemIconThemeName() and iconSearchPaths()
from QGuiPlatformPlugin and re-add them as
QPlatformTheme::themeHint().
- Remove styleHint() from QGuiPlatformPlugin, add it to
QPlatformTheme::themeHint().
- Add UNIX themes with factory function (Generic,
KDE, Gnome), taking it from Qt 4.8 code (stripping the
KDE 3 code).
- Implement Windows palettes.
Task-number: QTBUG-24204
Change-Id: Ie27ec035df4f84c42deaffc4816b2e53ce705462
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
- made subdir test depend on echo
- remove SRCDIR and changed to use TESTDATA and QFINDTESTDATA
- added waitForFinish() to handle slow networks
- removed core module header from echo subprogram and replaced
with needed header only
- Added ipv6 skip to connectToIPV6Address() if not available
- Added check QT_BUILD_INTERNAL and skip tests if backend
not available
- Skip permission tests if run as root
- Removed win32 debug and release directory locations so that
application is in known location relative to test data
Change-Id: I58c3c2fca3cd2fee72fdb81d016bb4fd7fe08ac2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- no longer needed after test that used it was removed
Change-Id: I63fc8a9db07f9250507becb9bf6c2aefe0fdc254
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The architecture is detected at compile time based on the predefined
macros from the compiler. Don't use QT_ARCH in .pro, .pri, or .prf
files. The PNG_NO_ASSEMBLER_CODE define from libpng.pri is not present
in the current copy of src/3rdparty/libpng, so no change in
functionality is expected.
The conditional for the SUPPORT_JIT define in pcre.pri is moved to
src/3rdparty/pcre/config.h, again so that we can use the compiler's
predefined macros to detect the architecture at compile time.
Replace QT_ARCH_ARM, QT_ARCH_MIPS, and QT_ARCH_SPARC with their
Q_PROCESSOR_* equivalents.
Replace QT_ARCH_INTEGRITY, QT_ARCH_VXWORKS, and QT_ARCH_WINDOWSCE with
their Q_OS_* equivalents.
Note that this commit also effectively disables the SPARC atomic
implementation. An inline implementation for SPARC needs to be added,
or we remove the current code and instead rely on the GCC intrinsic or
C++11 std::atomic support on SPARC.
Note also that this commit does not remove QT_ARCH from configure or
qconfig.h. This will continue to be set until all Qt 5 projects can be
moved away from using QT_ARCH.
Change-Id: I5de747cc4436d21941329974cff3016970f497b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Change-Id: Ib5a8513cc2d08adce49602b2590059b918b1ffda
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The helper process 'app' wasn't built in release configuration.
Also improved finding the helper executable to utilize
QFINDTESTDATA and print out a proper errors if it could not be
found or started.
Note that adding ".exe" to process name in Windows is unnecessary
as QProcess already does that for you, so removed the ifdeffing.
Task-number: QTBUG-24330
Change-Id: Ibe75e0ecd24181ab623d0a60f17ecaf92052b0dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This allows to drop or paste them into lineedits and text widgets
(including such widgets in non-Qt applications)
Implementation note: this is done on-demand rather than in setUrls
so that it's still possible to setText explicitely; the new code
is only a fallback for when no text/plain data is available.
Change-Id: Ie90c43a30bfa64a6047b627e7351d20bf5ec8e03
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Historically, we've calculated font height as ascent+descent+1.
In Qt 4, a patch was added to work around this by subtracting
1 from the descent of the font engines. We now remove the +1 and
the work arounds.
Change-Id: I7e25d49b97ac892015d3328f32d70eb9a7c2d88f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The watchFileAndItsDirectory() test would fail due to atime updates for
the first watched file coming up to 2 seconds after the file was closed.
Observation shows that the atime has a 2 second resolution on Mac OS X
using HFS+, so add an appropriate delay to make sure that the atime
update from the kqueue based file system watcher can dispatch all
updates.
Task-number: QTBUG-22744
Change-Id: Ie79af20d6b4c154021307c8a8f6d336369720337
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Prior to this commit, the following statement in the qtestlib
documentation was untrue: "If init() fails, the following testfunction
will not be executed, the test will proceed to the next testfunction."
If init() called QSKIP, the test function would be skipped, but if
init() reported a failure, the test function would still be executed
(even though doing so could be unsafe).
This commit makes testlib skip a test function if init() reports a
failure and enhances the selftests to cover skips and fails in both
init() and cleanup().
Task-number: QTBUG-20371
Change-Id: Id1cc8464ae0b8c257ae1b74dbe9189a501f5366b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed to use TESTDATA and QFINDTESTDATA instead of SRCDIR
Change-Id: I30bf175c2c9044e1f8556260a032467ca0dfc09f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to use TESTDATA and QFINDTESTDATA instead of SRCDIR
Change-Id: I1957ef287ba2f337b5e0b2c6245d872eacb6316f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed qcryptographichash to use TESTDATA and QFINDTESTDATA
Change-Id: Ic3a1bdccc9f81605c648dab2a642421d17f7fe80
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
