this goes at the cost of <into> without the subsequent dot not being
filtered before the result insertion any more. that's not expected to
be a problem, as it's not particularly useful to iterate the target
namespace without the dot in the first place.
Change-Id: Ib3497a60613b4c8c26676fe76b731239e427b8a7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
we have all necessary overloads now.
Change-Id: Ic4472eba15d4234e968fcb9443d0f79011aa43fd
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Plugin bundles are not frameworks, so this fixes the case where a lib
template with plugin and lib_bundle in the CONFIG would be mistaken
for a framework bundle, which has a different filesystem layout and
handling.
Change-Id: I9ce9daf22d4e3de70bfe7bc8bb219068de0bca42
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is a prerequisite for properly constructed framework bundles.
On certain Apple platforms (iOS, tvOS, watchOS), bundles are used
in "shallow" format, meaning that the directory structures are
flattened compared to the one used in macOS bundles.
shallow_bundle allows the difference to be expressed independently
of the platform. Note that the term "shallow bundle" is used by
Apple in Xcode internals.
Change-Id: I1189c52b0ea66843c313783176c11cc2af97ad25
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Replaces our mix of comments for annotating intended absence of break
in switches with the C++17 attribute [[fallthrough]], or its earlier
a clang extension counterpart.
Change-Id: I4b2d0b9b5e4425819c7f1bf01608093c536b6d14
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MakefileGenerater::Compiler is larger than a void*, so holding
it in QList is horribly inefficient.
Fix by using QVector instead.
Change-Id: I9ea173271caf9b4995d311c3864c6967da049380
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's empty, but non-trivial, thus preventing move special member
functions from being generated by the compiler (now that qmake
is compiled as C++11, too).
The default ctor was also empty - removed, too.
Change-Id: I714db524f681f1fc250d21926245757e97351e87
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Has a few too many fields for defining a member-swap
(which would be required to mark it shared).
Change-Id: Iecbeec9e60a9884cb4a984c58cb192918cef799d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's empty, but non-trivial, thus preventing move special member
functions from being generated by the compiler (now that qmake
is compiled as C++11, too).
Change-Id: I7e4b6d7f604020dd5e6da81f7a046202c8b78e09
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's empty, but non-trivial, thus preventing move special member
functions from being generated by the compiler (now that qmake
is compiled as C++11, too).
Change-Id: I9431311d24da802f147ce10e475936838bb85d41
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It doesn't save any memory, generates worse code, and
prevents a member-swap from being added.
Change-Id: Iddc0f1338478e465f34076857e266f1912fbaba6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
As of version 10.12 (Sierra), the name of Apple's desktop operating
system will be macOS. Change the occurrences where the Mac platform
is discussed to use a macro \macos, which expands to 'macOS'. This
helps with adapting to future renaming.
Update the instructions on mac-specific Q_OS_* macro usage.
Add a \target for the old 'Qt for OS X' topic to keep links working
for other documentation modules that try to link with the old name.
Change-Id: Id33fb0cd985df702a4ae4efb4c5fd428e77d9b85
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Visual Studio automatically defines _WINDLL when building a DLL,
regardless of project settings
(https://msdn.microsoft.com/en-us/library/8x480de8.aspx). This define
is therefore widely used to detect DLL vs. static library or executable
build target on Windows.
For makefiles, _WINDLL need to be manually defined, which QMake failed
to do so far.
Task-number: QTBUG-55183
Change-Id: Ic62201666c44e730e6881706d568ce9eaf22b7a4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this is useful when an adequate message has already been emitted by
other means, like various built-ins do.
Change-Id: I092771f55969fad8b214204d666327664727c572
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Conflicts:
src/corelib/io/qtemporarydir.cpp
One side encapsulated a repeated piece of #if-ery in a local define;
the other added to the #if-ery. Made its addition to the other's.
src/corelib/kernel/qeventdispatcher_unix_p.h
One side moved some members into a struct; this collided with a #undef
check that neither side now has. Discarded the #undef part.
src/gui/opengl/qopengltexturehelper_p.h
5.7 deleted a bunch of methods; not clear why merge got confused.
src/tools/moc/moc.cpp
One added a name to the copyright header; another changed its URL.
Change-Id: I9e9032b819f030d67f1915445acf2793e98713fa
these are the two signals unhelpfully suppressed by system(2).
Change-Id: I5e5df9f6d136601f0f36a8d645f90a1cab9995ad
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In order for moc to properly parse #ifdefs and family, we've had
QMAKE_COMPILER_DEFINES as a list of pre-defined macros from the
compiler. That list is woefully incomplete.
Instead, let's simply ask the compiler for the list. With GCC and
family, we use the -dM flag while preprocessing. With ICC on Windows,
the flag gains an extra "Q" but is otherwise the same. For MSVC, it
requires using some undocumented switches and parsing environment
variables (I've tested MSVC 2012, 2013 and 2015).
The new moc option is called --include to be similar to GCC's -include
option. It does more than just parse a list of pre-defined macros and
can be used to insert any sort of code that moc needs to parse prior to
the main file.
Change-Id: I7de033f80b0e4431b7f1ffff13fca02dbb60a0a6
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Conflicts:
qmake/library/qmakeevaluator.cpp
One side changed the iterator to use ranged-for, the other changed its
body; they only conflicted because the latter had to add braces around
the body, intruding on the for-line. Trivial resolution.
Change-Id: Ib487bc3bd6e3c5225db15f94b9a8f6caaa33456b
when the file name is empty, the path will be returned verbatim. this
must be considered when constructing the return value.
Task-number: QTBUG-54550
Change-Id: Ie108ed52275e66a154ef63bd6f7193f55b3e0454
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
that can make sense if a function which determines the availability of
a dependency fails to do so for unexpected reasons.
Change-Id: If6cd113df25aee66830c120a2fab067c822a4543
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
if() would simply "downgrade" a fatal error to a false condition, which
is certainly not expected.
Change-Id: Ie9c54f2bddf588856498bf795007b341b7c9363a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This was only used to specify XP as a target which is
not supported on 5.8 anymore. Clean up all associated
special handling in the mkspecs and pro files.
This effectively reverts change 10a0ac75.
Change-Id: I420d73002912989f1a5be961a2d09277ec4a4425
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
At least report the error string and the file offset where
the error happened.
Change-Id: Iaa1733593b8af2a7a52b67c0f495731f045d2c11
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
A bug in the Windows C Runtime causes text mode pipes to drop newlines
sometimes. This bug was hidden because of another bug in rcc which
caused newlines to be redundantly duplicated. When the latter bug was
fixed (commit 53d5811b) the former bug was exposed, causing invalid
vcxproj files to be generated. The Windows bug is described here:
https://connect.microsoft.com/VisualStudio/feedback/details/1902345
The workaround is to avoid text mode, and do the conversion of "\r\n"
to "\n" ourselves (which we were already doing anyway).
Change-Id: I792599a4cd7822f109fa921f02207fb1b144b1d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This resolves an issue where qmake would generate a Makefile with an
install command immediately followed by a test command, with no
intermediary newline and tab to separate them.
Task-number: QTBUG-54035
Change-Id: I7f9226f25e92b49ce689d252e9c4a58b877f2972
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The two PDB files that the MSVC compiler and linker create are supposed
to be handled differently and should not share the same file path.
Using the same file path for both can result in corrupted PDB files and
longer build times.
Use $${TARGET}.vc.pdb in the OBJECTS_DIR for the compiler and
$${TARGET}.pdb (the default) for the linker.
Task-number: QTBUG-53895
Change-Id: I31f06d4a674a3aa2afe5b30499bae820e5caf2c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
just like $$member(), but operates on a string value rather than a list
variable. it is the swiss army knife of cutting, providing equivalents
of left(), right(), mid() and reverse() all in one.
[ChangeLog][qmake] Added $$str_member() function.
Change-Id: I7c7c6c971db402fff41b428d32a4451f45400728
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
this is strlen(), but the name is matched to $$size(), just namespaced
to reflect that it operates on a string value rather than a list
variable.
[ChangeLog][qmake] Added $$str_size() function.
Change-Id: I56c8b863da244e66bd283257a66b197aa73b0e57
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
amazing how we managed to do without it for so long. ^^
the name is intentionally somewhat obscure to avoid clashes, and some
namespacing is good anyway.
[ChangeLog][qmake] Added $$num_add() function.
Change-Id: Ib7648b1f425ef096a87b51f158d0f1409e5c4daa
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
while implementing stacks and queues was possible before with the help
of $$member(), these functions make it much more straight-forward.
[ChangeLog][qmake] Added $$take_first() and $$take_last() functions.
Change-Id: I4922a5331780e468a42c663c9ad3c6456a95a6bf
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
we have perfectly good overloads which work with ProString itself, or
at least with QStringRef.
Change-Id: I45f39b8c2f83216f20849dd58eb3b8d78726083d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
this also saves some of the cheap but ugly toQString() calls.
Change-Id: Iebe644986501db3878306521c76e4ba2c2fb97b4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the only place where this actually saves a deep copy is the evaluation
of if(), but as a side effect the parser is now able to deal with not
null-terminated strings, which is kinda nice as well.
Change-Id: Ib6d08617aa79d2f9eaecd4906d4d548f34bf377d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
saves some more cheap but pointless conversions to QString.
this makes the introduction of the ProStringList::contains(QStringRef)
overload necessary.
Change-Id: Ic61993bd9a4b28fbba1b8e346345fd5f5636c6f0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
this introduces an ambiguity, so some char* arguments need explicit
QString construction now.
Change-Id: Ic3919a1fa9419bbb3b57dd1aa7eb95643ee59e53
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
While previous SDKs used the form "CE_SDK (CE_ARCH)" in their
configuration/platform names, this is not true fo the Toradex SDK.
Inside Visual Studio the platform is only called "Toradex_CE800"
instead of "Toradex_CE800 (ARMV7)".
In order not to break other SDKs CE_PLATFORMNAME is introduced and
used in the wince80colibri-armv7-msvc2012 mkspec. If the variable
is set qmake uses it as the platform name in its vcproj generator.
Change-Id: Icb501bf6446a9f617745a0d2c7a80b240680b043
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
this is done by recognizing the -- option and putting everything that
follows it into the QMAKE_EXTRA_ARGS variable.
the purpose of this is being able to pass "alien" arguments (for example
configure options) without having to marshal them into a qmake variable
assignment manually. this is expected to greatly enhance the convenience
when no wrapper script (i.e., configure itself) is used (which will be
the case outside qtbase).
Change-Id: I47735bdab2811d17d7d394fbf638ebd14332ea73
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Port the last four remaining Q_FOREACH users in qmake
and uic to C++11 range-for and mark all qtbase tools
(incl. qmake) as Q_FOREACH-free, using QT_NO_FOREACH.
Change-Id: Ief4e5877269e7a853e4cf05e58861a448e822d3d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
- QMAKE_FILE_IN_EXT as an alias for QMAKE_FILE_EXT, for consistency with
QMAKE_FILE_IN_BASE
- QMAKE_FILE_IN_NAME to make pairing _EXT/_BASE to get a full name
unnecessary (finally ...), and make use of it
- QMAKE_FILE_OUT_PATH, because i'll need it
Change-Id: I3d91ddb84f9cce52a665d562da11d165c92550c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it's beyond me why they shouldn't be.
Change-Id: I2493469636e4f196bfeb2eb00a691aeae0f1881d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
CID 155005: Possible illegal access in string. Some loops were
reading the buffer without checking the bounds.
Change-Id: I910671a6d56808138ec2bb5d96bd7edf78b20f73
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
CID 21629: The QMakeProject::read result was ignored.
MetaMakefileGenerator::createMakefileGenerator will be called if the
project was read.
Change-Id: I9187c82efd1abedcaa8e394f1fdb0b7f35a2b1d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Xcode does not recognize "<Group>" with a capital G, only "<group>" with
a lowercase g. As a result, paths of files within these groups are
calculated incorrectly. For example, dragging any external file into the
Xcode project would result in its leading slash being removed (while
still treated as an absolute path - broken reference). Furthermore, the
dropdown in Xcode displayed the Group location as an invalid string
instead of the correct "Relative to Group". This patch restores correct
behavior.
This fixes a regression introduced in
f09ec09c208c75a16abe05b6bb505a1fc58775a6.
Task-number: QTBUG-52701
Change-Id: I9af5360049a79e7958301e4090a9a542bab0af8c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Update files using old header.LGPL3 to header.LGPL
Update files using old FDL template to use new one
Update files using old BSD template to use new one
Change-Id: I36a78272516f9953d02956522f285b40adfc8915
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This fix repairs the mechanism to deploy Qt dlls as well as C++ runtime
to a wince target in Visual Studio.
Do this by adding a deploy section in the Visual Studio solution and
adding the C++ runtime from the mkspec to the files deployed to the target.
Deploy target path is set to what the wizard of Visual Studio defaults to.
Before, the c++ runtime was only deployed for executables which were built
as part of Qt.
Task-number: QTBUG-50924
Change-Id: I478010dc16e35c68578281895aa3ae14b5c96bb4
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
we can rely on the super class to get it right.
as a "side effect", we won't try to install .pdb files for aux projects
anymore - the duplicated conditional was incomplete.
Change-Id: I9b66f32ab50ed2a1d4e6e03a9d205686a4b4a981
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
The platform has been removed in Qt 5.7.
Change-Id: Ie768b5ffbe60270c27b4a670dcf580ea361cb361
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Found by UBSan:
qmake/library/qmakeparser.cpp:278:33: runtime error: null pointer passed as argument 2, which is declared to never be null
Guard the call.
Change-Id: I99341ab439a511f366dae9344ddcc8727c33b9b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The user-defined copy assignment, copy constructor
and dtor inhibit the move special member functions.
Implement them manually.
Change-Id: I0d38d7cf6c9611e13b5b081d734d01d6fe4d5276
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
evidently, nothing and nobody sets this option, as it's been completely
broken since 6234dec41f (qt 5.5) and apparently nobody noticed.
Change-Id: I5a82ebd963a292af4689397875dde096f63d751a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
They prevent move special member functions from
being synthesized by the compiler.
Change-Id: I90c4a6e286734ef3906ee833826bd3bfbdad3874
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This adds the functionality to build Qt with clang under Windows against
the Microsoft Visual Studio 2015 runtime.
In order to replicate this, a Clang 3.8 build with Visual Studio 2015
Update 1 is needed.
Adds compiler detection to Qt to distinguish correctly the clang compiler
and Windows with Visual Studio.
Clang has some built-in numeric functions, there is no need to use the
Microsoft versions, which also conflict here.
Task-number: QTBUG-50804
Change-Id: Ia4b267a298310ac7d73edf473b12792991249d8a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Iterate only once over QJsonObject, create key list by
existing loop instead of create by QJsonObject::keys(),
which contains internal loop.
In common case if loop's statement is lightweight,
then effect of optimization is significant, and vice versa.
Also make addJsonArray() and addJsonObject() functions
more homogeneous.
Use reserve to optimize memory allocation.
Change-Id: Id122cd1becfd34bb06640876b1c79e1d396d2a6b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Java-style iterators are slower than STL-style ones, so
they should not be used in library code.
Replaced them with C++11 range-for, STL iterators or, in
one case, qDeleteAll().
In one case, avoid a double hash lookup by using erase(it)
instead of remove(it.key()), which we can now do without
detaching, due to the new erase() taking const_iterator.
Change-Id: I96174657fed70f76120b2c9d8190b4e70d5d8179
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
In VcprojGenerator::collectDependencies(), a temporary QLinkedList
is created, then iterated over. There's no reason to use a node-
based container here: no references are taken, no erases happen,
esp. not in the middle...
Port to QVector instead and reserve it, since the maximum size is
known ahead of time, and the lifetime of the container is very
short.
Since the loop iterating over the linked list needed touching
anyway, port directly to C++11 range-for.
Change-Id: Ic5dfeebcd9da37c214f54abc6025a0a2b8fa3b5d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
(or trivially marked const) ... by replacing them
with C++11 range-for loops.
Change-Id: I1522e220a57ecb1c5ee0d4281233b3c3931a2ff8
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
To avoid detaches of these mutable Qt containers,
wrap the container in qAsConst().
Change-Id: If086bea06fe26232a7bb99fad8b09fce4dc74c27
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
This is the simplest of the patch series: Q_FOREACH took a
copy, so we do, too. Except we don't, since we're just
catching the return value that comes out of the function
(RVO). We can't feed the rvalues into range-for, because
they are non-const and would thus detach.
Change-Id: I5834620bf82f3442da7b2838363d351a0fb960a0
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
The functions QMakeProject::values(), QMakeMetaInfo::values()
and QHashIterator::value() all return by const-reference,
so they can be passed to range-for without further changes.
Change-Id: Ic3b39ed8ff8cd7a6f287f1aa9d61a1acd67d7aaa
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... iterate over the container itself instead. Avoids
temporary QList creation as well as the lookup cost
when actually calling value(key).
Change-Id: Icac867c30e63863cfa44a382eedd4d6df2070a59
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QFileInfo::exists(f) is somewhat faster than the version which creates an temporary object.
Change-Id: I5f931a86d9dfad57d99efe04ca115422de43def9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When building QNX on MS-Windows, make magically adds the Msys root as
prefix to variables whose values look like paths; this applies to both
environment variables and variables given values on the command-line.
When we don't actually want to install under the Msys root, this is
unwelcome "help". So (for MinGW's make) support a magic prefix of our
own, @msyshack@, that'll make a path value for INSTALL_ROOT not look
like a path to make; we can then strip it off when we come to use it.
Change-Id: I951ad3c8fe3e5cfb49e6e361d7fff779f3a9d716
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Having a precompiled header file without file extension (or without
common file extension) led to an incorrectly generated Visual
Studio project file. The custom build step for automatically
generating the corresponding source file was missing.
Remove the file extension check that apparently was yet another
feeble attempt of runtime optimization.
Task-number: QTBUG-50442
Change-Id: I0552f94be12cbb70e2f32c242c7364699979bd81
Reviewed-by: Karsten Heimrich <karsten.heimrich@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Previously the hardware and camera button handler were guarded inside a
Q_OS_WINPHONE which does not apply to Windows 10.
Instead use WINAPI_PARTITION_FAMILY like on other places, this covers
Windows Phone 8.1 as well as Windows 10.
To find windows.phone.ui.input.h at build time the Mobile Extension
directory needs to be added to the include paths inside qmake. On
runtime we need to check whether we have hardware buttons or not. In
case they exist, register the handlers, otherwise skip registration.
Skipping also helps to keep WACK succeeding.
Task-number: QTBUG-50427
Change-Id: Ibeae15dbde12553cebd2b73b1a40b754c014f426
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
... instead of using erase in a loop, with quadratic complexity.
Change-Id: I4ac03ac0e893fc5dbb5e45131fcbfe82f1564bee
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
the primary purpose is making env var prepend mode work for unset
variables on windows. this is achieved by using a conditional and delayed
variable expansion. however, the latter is disabled by default and can
be locally enabled only in batch files. therefore, write wrapper scripts
and substitute them for the actual commands. we do this also on unix,
both for consistency and simply because the commands look much less
confusing.
this change is slightly backwards-incompatible, as invoking
qtAddToolEnv() multiple times on the same command will now make a total
mess. also, invoking it on a command that contains 'make' macro
expansions isn't a good idea, so testcase.prf needed an adjustment. the
function is an undocumented internal, so Nobody Should Care (TM).
this also reverts 80ebedecf9, as it's obsolete now.
Change-Id: I8394b77868b495abcf27b688996ca74c40b80994
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
In 50bf54c invoking windeployqt was only required in release mode as
MDILXapCompile was not invoked for debug builds with Visual Studio 2013.
However, Visual Studio 2015 invokes MDILXapCompile for debug and
release. Hence we have to use this workaround unconditionally.
Also we cannot limit this to msvc2015 host specs only, as older projects
still might be loaded with Visual Studio 2015 causing the build to
break.
Task-number: QTBUG-49815
Change-Id: Ia120a392967319b945a9746ad489f2db0eed7156
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
while we evaluate the features themselves in precise mode (which is the
reason why they can error out), we do not want them to terminate
cumulative project evaluation.
Change-Id: I70f3e1bcb2ca04a70c74ff484749ca92c1cf6372
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qttools/90ee4094161b427c32581bca2f5286edb4fffdb1)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
After 90e7cc172a, QStringList no longer
includes QDataStream.
This also reverts commit c1be0fbe7d, which
did the same in a worse way.
Change-Id: Ib10622b0da3b3450d29fc65dc5356fde75444a8f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
(cherry picked from qttools/376501ae5a86859821c0e89b2e8fbc9906d11e07)
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
As for the #include-parser, the moc-detector's minimal C preprocessor
could be confused by a raw string into ignoring large chunks of code.
Change-Id: Id688e9a1f04628ce75a51a7d15269078c734288e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If a / wasn't part of a comment-start, it and the character after it
were none the less stepped over. If the character after started an
enclosure, this would duly be missed, leading to mis-parsing of the
subsequent text. As for similar bug recently fixed in findDeps().
Change-Id: Ie5329ec633c23a554b42a6351723c980e27fb9a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The C preprocessor allows backslash-newline anywhere and allows
comments anywhere it allows space. Testing wilfully perverse
applications of that revealed qmake's parsing of #include directives
wasn't very robust. So rework to actually follow the rules and add
those tests.
Change-Id: If5cc7bfb65f9994e9ab9ed216dd1ee7285c63934
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The parser in QMakeSourceFileInfo::findDeps() would step over the
closing quote of a string, only to have a for loop then step over the
character just after that closing quote, which was thus never studied;
this could lead to problems in various ways. Fixed that and expanded
findDeps() test to catch regressions.
Task-number: QTBUG-17533
Change-Id: I7dec5222e38fa188495b39376ffee70bc7bbc87f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This information is outdated.
Change-Id: Ic2e10f7c858eed6f1b7c550995cb29004b4bd280
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Can't sensibly test unless the compiler does support raw strings,
since any test that would catch qmake's (prior) inability to parse raw
strings would necessarily confuse the C++ compiler in the same way.
This even applies (in test app code) to any #if-ery around the raw
string, since tokenization happens before preprocessor directives are
resolved. So the #if-ery on Q_COMPILER_RAW_STRINGS has to be in
tst_qmake.cpp, not the test app it builds.
Change-Id: I4a461f515adff288b54fb273fd9996f9b906d11c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The Visual Studio registry keys are stored in the 32 bit view.
Extend qt_readRegistryKey with an option that enables the caller to
choose the 32 bit or 64 bit registry view.
We now read the Visual Studio registry keys from the 32 bit registry
view even in a 64 bit build.
Adding the next Visual Studio version will become a bit easier.
Change-Id: I7300b992be6058f30a422e3f1fe0bafade6eea54
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
For some reason, the solution generator was looking for the vcproj
files in the source tree. It should look for them in the output tree
instead (suggested by Joerg Bornemann). This should handle both
in-source and out-of-source builds, and the special-case code for
handling out-of-source builds (which had a bug) can be removed.
Task-number: QTBUG-49665
Change-Id: I40b5c5907c52ffb074ccb8f297bb5924eacc1cb0
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
We need to remember where the included file's name starts anyway; if
we move this to before the search for the end, we don't need a
separate variable to keep track of its length.
Change-Id: Ia8d72839ac3fa32f2e748a21ee70dcab614562f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When looking for the keyword in a preprocessor directive, we were
checking for non-word characters to find its end. If that check
failed (i.e. we had a word character) we would then check for EOL
(which necessarily failed, on a word character). That made no sense.
However, we genuinely have no interest in a directive with nothing
after the keyword, so do check for EOL after the loop (once we've
skipped spaces after the keyword).
The loop itself was made needlessly complicated by, on finding the end
of the keyword, skipping over later space inside the loop. Moved this
outside the loop.
Change-Id: Iccc2d445bf44deb75604e7fa60f2464e7397d8ed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The C preprocessor does believe in a # [nothing] line; and we may as
well give up before checking for keywords if we've run out of buffer.
Change-Id: I64dc3ad2808435389d0d7b56dcbc9d92ae72aa6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
A loop to skip space and comments was meant to break on anything else
but would have not broken on a division operator (where it should) due
to it getting caught in the check for a comment-start, without falling
back suitably when it didn't complete that check.
Managed to contrive a suitably twisted change to findDeps test to
reveal the bug; broken previously, now fixed. Not ideal, as it relied
on another bug to fail previously - backslash-newline shouldn't end a
preprocessing directive line - but it should still pass once that's
fixed, too. Exercising a bug in qmake usually involves code that
won't compile anyway, making it tricky to write a test that reveals
the bug but that passes once it's fixed.
Change-Id: I08a1d7cc5e3d7fd1ac0a48e5c09dfdfbb7580b11
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Principally *(buffer + expr) -> buffer[expr] changes, with some hspace
normalization on affected lines. Made some empty loops more visible.
Pulled out a repeated character class test as a function.
Change-Id: I03d1b633550ad1814fa383d69ea04138dd0f82cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
No-one is known to use it - we don't even have a test for it. It
plays poorly with the real preprocessor and it has not produced any
output since at least Qt 4.0 (unless qmake is invoked with at least
one -d flag, drowning the output in level 1 debug output).
This incidentally means no preprocessor directive we care about has an
underscore in its keyword.
Task-number: QTBUG-49487
Change-Id: I123a945c1dfe29d1d3ceee1129cfedc043f2e7d4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Only VcprojGenerator over-rode it; and did so with a replacement
identical to the one on the base, so there was no point to it.
Change-Id: I5b899372247809c82b1cae25817e06c5849cd10d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The Xcode generator iterates trought all libraries and replaces
their suffix (e.g "_debug") with a placeholder that lets Xcode
switch between different library versions depending on the target.
The current way we do this fails when the name of a library happens
to contain the string "_debug" (e.g "qmldbg_debugger"). Since we
replace every occurrence of suffix in the path, we end up
replacing that part as well. The result will be linking errors.
This patch ensures that we only replace the last occurrence of the
suffix in the file path.
Task-number: QTBUG-48961
Change-Id: I9fafbe0ea0ad8b9cfd13448d6b28801106e645ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
This separation makes it possible to make a
canadian cross build of Qt on a linux build machine.
The canadian cross build requires an external Qt that
runs on the build system.
Change-Id: Ifd83a4c6376d3299647e74bb349a3452a6f433fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit 4bb004de94 broke the linker
options in generated Visual Studio projects.
We need to call fixLibFlags on QMAKE_LIBS and QMAKE_LIBS_PRIVATE.
Task-number: QTBUG-48936
Change-Id: I2f12bf0117d27104cd34f2f43fdeb7b948fa375e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use indexOf() to match individual characters, which is a lot faster than
QRegExp. As a side effect, don't try to expand what we just inserted.
Change-Id: I964fbd92055f2f2649e7d8ed5739cf1fc7cae927
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/2cc17a61eb6d0fee80fd388fcc5be03a59e4f2b5)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Qt 5.3 is the minimum requirement these days. Remove all fallback code
from sources and project files.
Change-Id: If6188a471197acadda4d6baee71804ba1a8026c6
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
(cherry picked from qtcreator/847f10e9ccc8c3541782a790e04c85c6b4c701da)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Less typing and less cycles than join(QString) where appropriate
Change-Id: I6ebc0e17e4d7fd9845864dd95b7de4ba4dad6906
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
(cherry picked from qtcreator/6431ab2c799553623ec3fe6a79f1e85484558dd6)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this fixes an assertion failure with qt4 mingw specs when PATH contains
a "." element.
Task-number: QTCREATORBUG-12528
Change-Id: I2b6b7e02cf38881d40bd78bb0d705f7d58d0736c
Reviewed-by: Christian Kandeler <christian.kandeler@digia.com>
(cherry picked from qtcreator/d0428a05220ed0550dd84cdb8299a1fb37b0fe72)
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
assigning a relative path to QMAKESPEC or QMAKESPEC_ORIGINAL (in the qt4
windows legacy code) would lead to an assert further down the line.
just ignore such attempts silently.
Task-number: QTCREATORBUG-8477
Change-Id: Ie53d0ef004c743284b85de4e89f112e0161ff4b7
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/e017a1dc8b2030e509d6198315e9f6a9869667e7)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
just syncing up with qtcreator.
Change-Id: I2bda6961f6f1164bdc58acd78fa3d2221977f0cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/765ad6c3d28813d4baa0aeafd03076ba76557d3d)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it could be only triggered by abusing the function (no expansion
actually done), and nobody is using this to start with, but still ...
Change-Id: I3d4a23ae4d1eea07955572d8213094e0dc218f6d
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/cdc2a0f72334268684e0407e9b04b3188e00d4bf)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This prevents an access to free'd memory when opening qtcreator.pro.
Looks like qml2puppet.pro gets added to that cache in QMakeVfs::writeFile
with part of the including pro-file's filename in it. That part gets
cleaned when that containing ProFile goes out of scope, leaving a key in
QMakeVfs::m_files free'd but accessible.
Change-Id: I80b43d2fbb66c214647497ea97e6e3a587e274d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/336c3159617cdb3edd35021b5fb312d4d43f9a84)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QProcessEnvironment caches keys, so we must not pass it QStrings created with
fromRawData()
Task-number: QTCREATORBUG-9142
Change-Id: I29fade02f3bc4110fafb1b04d44f2e653951a2ae
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/99f15f1706868c4b2f84bc4164451bd69b3b8188)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
we execute foreach loops now. this is (mostly) safe nowadays, because
a previous change added precautions against exponential value list
growth, so it's unlikely that two nested loops would keep the cpu busy
for a day as before.
we continue to exclude forever loops and loops with excessive integer
counts.
Task-number: QTBUG-8550
Change-Id: Iaa116086986cc7fd5023834753f791dd205102e5
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qttools/dd4d594c787a62fa8aa12695c5d115c71b59bacd)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
ProFileCacheManager::discardFile(s) may remove an entry from
the ProfileCache only when it is unused (which is the case iff
ent->locker is zero).
Change-Id: I9df2079087af6bd0d35dd121db6222e8a6ec9389
Task-number: QTCREATORBUG-14730
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
(cherry picked from qtcreator/dedcd25924743e494055c1e0195aeef0f3983a1d)
(cherry picked from qtcreator/b335b2a083e456e2b44b1e9454a0f4cd41e2a397)
(cherry picked from qtcreator/a027cbcd7051c634a51b6029dcb8a5b4bfe8b046)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
... and make use of it in qt.prf.
[ChangeLog][qmake][Unix] Added support for relative paths in
QMAKE_RPATHDIR.
Note that this technically breaks backwards compatibility, as relative
paths were previously silently resolved against $$_PRO_FILE_PWD_. This
was not documented and seems rather useless, so i'm not worried.
Change-Id: I855042a8962ab34ad4617899a5b9825af0087f8a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
msvc-desktop.conf does disable the exception warning for building all
modules, so use the same set of compiler flags for building qmake.
Change-Id: I97026f3cb78e656e8de76e1c8afe19cec6501499
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Since the Qt headers require them now, we need to ensure that happens
properly.
Change-Id: Ib306f8f647014b399b87ffff13f14196c2c75bef
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's easier to parse than qglobal.h. The objective is actually to have
macros with parts of the version number, so the major or minor numbers
could be used in other preprocessor macros.
Change-Id: I42e7ef1a481840699a8dffff1404eda1dd5c308d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the library inside a bundle doesn't have an extension.
this doesn't really fix anything except suppressing the error message,
as we discard the result of the operation anyway.
Change-Id: Idfe3d1714dedb59d9d3e86a65f074e516c431389
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
at least the mingw version we use now interprets the sequence \# as a
literal hashmark, which completely defeats the previous hack.
the new hack escapes the backslash with another backslash, which appears
to work. however, make does *not* remove the additional backslash, so
the result is a bit ugly.
Change-Id: I591a2be443880b162094d04e5a5e624216b59311
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Suffix rules are the old-fashioned way of defining implicit rules for make.
We don't need them as we generate explicit rules for all sources we build.
[ChangeLog][qmake] Makefile output no longer contains implicit
suffix rules, as all sources are built using explicit rules.
Change-Id: I4ecfa5b80c8ae33aea8730836f3baf99dd4951dd
Task-number: QTBUG-30813
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
