Focus change happen as: FocusAboutToChange event -> focus change
-> FocusOut event -> FocusIn event.
Input method need to have focus when calling commit(). Notification
on focus about to be lost allows QWindow implementations to commit in
time.
Also changes QWidget documentation to match code reality.
Change-Id: I17a8a374a33dd700909f79e370b42348869261a6
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Q_DECLARE_METATYPE macro is much better for a custom type registration
then a handwritten template specialization.
Change-Id: Ia15688d89f708fbff0c1da93e08052d31f3b3fc0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
show() on a window is asynchronous. Wait for it to complete before
continuing with the test.
Note the test already contained code for this, but it was inside of
a Q_WS_X11 block, making it dead code in Qt 5.
Change-Id: I06f892eea86278c56b1773a7e968bbe065f86260
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Otherwise metacity was crashing when a QWindow was destroyed immediately
after being activated, because metacity was trying to select events
(XSelectInput) for the already destroyed m_netWmUserTimeWindow.
Task-number: QTBUG-24492
Change-Id: Iedbe7bdd6b26110ca8bec6f33525209ae551ffd5
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
tst_qclipboard.cpp still has Q_WS_WIN which must be clear away. After
clean up, auto test will fail under windows: When setMimeData() is
called, dataChanged() signal will be emited twice.
The solution for QTBUG-24184 has partially solved the problem, but it
still there. Make sure emitChanged() only called by QPlatformClipboard
will give our more control for this.
Task-number: QTBUG-24484
Change-Id: I23566c6d3b32828b6865234c311af3635fe9e299
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This commit reverts partly 7401832a7d
There is something wrong with DummyWindow/XCB/Metacity, Metacity
crashes quite often when QWindow is activated.
Change-Id: I611af2678814f41c941cb697054135f561a77878
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Use QRectF consistently to avoid the rounding done in the conversion
to QRect.
Task-number: QTBUG-24463
Change-Id: If9ea858ebabf8c449ea058b9d379d4a57cb6c82d
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Remove previously defined insignificant test flag as the number of
tests failing has been reduced.
Task-number: QTBUG-24406
Task-number: QTBUG-23058
Change-Id: I01b41f30469cf7a440e21195e105cb30a8db76e2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Emit changed signal only if the clipboard is not owned,
in which case QClipboard does it.
Task-number: QTBUG-24184
Change-Id: I27420583a718a5f8cd93b9d361b1e422a75df300
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
- Save & Restore style and geometry when switching to
full screen and back since it is not a real state on
Windows.
- Obey the positioning policy in setGeometry.
Task-number: QTBUG-24185
Change-Id: I18dea4fd372e0b2e46273a7a27e0c6f4f4bde771
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This test fails intermittently, and at random locations.
Task-number: QTBUG-24322
Change-Id: Ied6dd4d1593066debc0fb48c6ca2a17a1f4d51b7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Marked the following tests insignificant due to failures, these need
to be fixed later and then re-enabled:
tst_QPixmap
tst_QClipboard
tst_QWindow
tst_QGuiApplication
tst_QPainter
tst_QPrinterInfo
tst_QPrinter
tst_QOpenGL
tst_QFontDatabse
tst_QFontMetrics
tst_QGlyphRun
tst_QRawFont
Task-number: QTBUG-24128
Change-Id: I39ade8a693c4580b5cd618624e892cdcac21d78c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Since some GUI event dispatchers are complete reimplementations and do
not build on the corelib ones, we want to run the same tests with the
other dispatcher.
Since this is a GUI test now, we need to make sure to drain system
events queued during application startup to make sure we can reliably
run the test functions.
Change-Id: I4905db70bc8f8584c4ef1f4d767824040281452c
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
QInputMethod better describes what the class is about, input methods
in general, be they panels or just composing input from key events.
Compatability headers added for old name. Not bulletproof but should be
enough to get transition done.
Change-Id: Iefde6e7ccb1ec4a3b226cef3469089e751c60fc1
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
As discussed on the development mailing list, the window list returned
by QGuiApplication::topLevellWindows() included all QWindows, even the
non top-level ones.
This commit introduces the new method allWindows(), which returns the list
of all QWindows, fixes the list returned by topLevelWindows() and also
introduces tests for both methods.
Change-Id: I761f0fcdec79f83949012c628655ed12cd18572c
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Deprecated QInputPanel::inputWindow() which is already
just returning QGuiApplication::activeWindow()
* Deprecated QInputPanel::inputItem() and introduced
QGuiApplication::focusObject(). Input methods can check
input method support by Qt::ImEnabled query.
Change-Id: I70a9c1c3f79aadb75c839d0489a9428f7a221df5
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Implement the public slot QWindow::close() and add the correspondent test.
Change-Id: If3f07cce3b26640f06fc52d0e4dca875d9894b3d
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
To match the previous QWindow::orientation() property which can be
useful to access from QML. Also, removed the automatic translation of
Qt::PrimaryOrientation to QScreen::primaryOrientation() on the QWindow
level, as it leads to a lot of complexity regarding the
QWindow::contentOrientationChanged() signal, and makes it hard to
distinguish between the case where the window's orientation follows
that of the screen, and the case where the orientation just happens to
be set to that of the screen.
Change-Id: I6950d1337b7f929815eff1328181855090d8066b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Previously we only had QWindow::setOrientation() which was a hint about
the orientation the window's contents were rendered in.
However, it's necessary to separate between the orientation
corresponding to the window buffer layout and orientation of the
contents. A game for example might typically want to use a landscape
buffer even on a portrait device. Thus, we replace
QWindow::orientation() with QWindow::reportContentOrientationChange() and
QWindow::requestWindowOrientation().
Change-Id: I1f07362192daf36c45519cb05b43ac352f1945b5
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
There is no guarantee the touches will be listed in the same order in
an update: the platform/generic plug-in, the drivers, etc. are all
free to shuffle the list of touch points in each report (even though
the order is fairly stable with most systems).
Therefore, to be safe, move and release events should be generated not
from the first point in the list but from the one with the matching
id.
Change-Id: I6615224cbf2cfdc440143eb3191482a23d85c6a4
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Change-Id: I6d69ac96597f27575dd40e4c80c982f06fa88f51
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
- made test depend on copier and paster to make sure they are built first.
- Changed to use installTestHelperApp() to deploy helper apps.
Change-Id: I39e4f2ddcc3c735e17256db5638bf8a3495362f6
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The current way we do it of having the platform or touch plugin send
both mouse and touch events is not ideal. There's no good way to write
an application that works sanely both on a touch-only device and on a
desktop except by restricting yourself to only handling mouse events. If
you try to handle touch events you don't get any events at all on
desktop, and if you try to handle both, you end up getting duplicate
events on touch devices.
Instead, we should get rid of the code in the plugins that automatically
sends mouse events translated from touch events. This change enables
that by making the behaviour fully configurable in QtGui.
Two new application attributes are added to explicitly say whether
unhandled touch events should be sent as synthesized mouse events and
vice versa, and no duplicates are automatically sent as the current
situation. Synthesized mouse events are enabled by default.
We also get rid of the QTouchEvent::TouchPoint::Primary flag, which
was only used to signal that the windowing system automatically
generated mouse events for that touch point. Now we only generate mouse
events from the first touch point in the list.
Change-Id: I8e20f3480407ca8c31b42de0a4d2b319e1346b65
Reviewed-by: Laszlo Agocs <laszlo.p.agocs@nokia.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@nokia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
This makes it possible for platform plugin independent code (such as
generic plugins) to report changes to screen properties. An example
would be an accelerometer plugin that reports orientation changes
without knowing anything about the windowing system.
Change-Id: I984984b6d064327772c264bc942269422451da37
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
The previous change missed some headers from years prior to 2011, and a
few new files were merged after the previous change.
Change-Id: Ib7d1a2b7062228c2a5373da64242b2ee1f0981e1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously they would fall into the unicode handling and return very
strange values.
Change-Id: I62a53894c0983bf53fd79f924b40a6fd3ba02993
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
We need that information to perform some optimizations in QVariant.
Change-Id: Id9a1716e49e4cedd17cd09a32fea4ff003ef61f2
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
When decoding a string don't assume valid modifier strings. If a
modifier string is unknown return Qt::Key_unknown instead of skipping
the modifier.
Currently 'Win+a' is decoded to 'A' but should be Qt::Key_unknown.
Change-Id: I1c82031159a8b3c19924a7c9e991bc6b1f90d617
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The duplicated hash tables in QGuiApplicationPrivate and
QApplicationPrivate are now unified into one single hash table in
QGuiApplicationPrivate. This also reduced the number of lookups.
The extra processing needed to keep the touch points' first/lastPos
values in sync is now done only once, in QGuiApplication. This
eliminates the performance penalty (for widget-based apps) that was
introduced during the QPA migration.
As an added bonus the patch adds support for touch events arriving
simultaenously from multiple devices. This was broken before: As there
is no guarantee that two devices/drivers will not send touch points
with the same ID, using structures with only the ID as key is
wrong. The proper key is composed of the device ID (that is, a
QTouchDevice pointer) and the touch point ID.
The exported internal function qt_translateRawTouchEvent() has been
removed. This function cannot work properly in the QPA world: It
injected touches into the widget subsystem (QApplication) only which
is wrong, and would result in half-filled touch events due to not
routing the injected data through QGuiApplication. Autotests using
this function are migrated to
QWindowSystemInterface::handleTouchEvent().
Change-Id: I7632781d77f9e0ac4626fd7c9933511c94492156
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
