A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
[ChangeLog][qmake] The CONFIG value c++latest was added to select the
latest C++ standard the currently used toolchain supports.
Task-number: QTBUG-75653
Change-Id: I22ddc9d293109d99e652b7ccb19d7226fca4716d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
src/corelib/tools/qlocale_data_p.h
(Regenerated by running the scripts in util/local_database/)
src/gui/opengl/qopengltextureuploader.cpp
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: I12df7f066ed0a25eb109f61c4b8d8dea63b683e2
They will be deprecated, so qmake wouldn't compile anymore.
Change-Id: I42212fdf213df696d736ed34458f7e79bd902dd5
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Information about header files is cached by qmake. The key is the
filename of the #include directive. For system includes (<stdio.h>) this
is unique, according to the search order in INCLUDE_PATH.
For local includes, given as "foo.h", there may be name collisions. Usually a
compiler first searches in the directory of the current file (stored in the
sourceDir variable), and only in case of a miss the INCLUDE_PATH is
considered.
The dependency generation now distinguishes local header files by their full
relative path. This is implemented by forcing the use of the full relative
path as key into the SourceFiles data structure if the flag try_local is set.
Change-Id: Ifd75325b53496824054595f7fc98d71bbd9d8aa6
Fixes: QTBUG-72383
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
CMake will now generate config and target files for each module that
provides tools. As a result, namespaced global targets such as
Qt5::moc or Qt5::rcc can be made available.
Third party projects that require just these tools, and not the Qt
modules themselves, should specify CMAKE_PREFIX_PATH pointing to the
installed Qt location, and call find_package(Qt5CoreTools),
find_package(Qt5GuiTools), etc.
It is also possible to call
find_package(Qt5Tools REQUIRED Core Widgets) where the last option
is a list of modules whose tools should be imported.
Note that all the tools are in the Qt5::
namespace and not in the Qt5CoreTools:: or Qt5WidgetsTools::
namespace.
This commit also changes the behavior regarding when to build tools
while building Qt itself.
When cross compiling Qt (checked via CMAKE_CROSSCOMPILING) or when
-DQT_FORCE_FIND_TOOLS=TRUE is passed, tools added by add_qt_tool will
always be searched for and not built.
In this case the user has to specify the CMake variable QT_HOST_PATH
pointing to an installed host Qt location.
When not cross compiling, tools added by add_qt_tool are built from
source.
When building leaf modules (like qtsvg) that require some tool that was
built in qtbase (like moc), the module project should contain a
find_package(Qt5ToolsCore) call and specify an appropriate
CMAKE_PREFIX_PATH so that the tool package is found.
Note that because HOST_QT_TOOLS_DIRECTORY was replaced by QT_HOST_PATH,
the ensure syncqt code was changed to make it work properly with
both qtbase and qtsvg.
Here's a list of tools and their module associations:
qmake, moc, rcc, tracegen, qfloat16-tables, qlalr -> CoreTools
qvkgen -> GuiTools
uic -> WidgetTools
dbus related tools -> DBusTools
Task-number: QTBUG-74134
Change-Id: Ie67d1e2f8de46102b48eca008f0b50caf4fbe3ed
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Qmake should not rebuild all the code in QtCore, but currently it does.
When linking against QtCore, all the symbols get duplicated. A clever
linker will "deduplicate" the symbols again, so this actually works
with shared Qt builds, but it fails for static builds.
Do not rely on the linker being clever and just do not link Qt at all
for qmake.
Change-Id: I0f79ed9176a19ee884dd425e5f23c26cf69dc422
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Added a sentence to explain how a .qmake.cache file influences the project root.
Task-number: QTBUG-21411
Change-Id: I97766edd96851f1c988ab07f842fb81a339e4ecd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This fixes the "could not parse compiler option" warning when
generating VS project files.
Fixes: QTBUG-75275
Change-Id: Idd98ae5fdb8ebf5a4e311cbb6cd3ed1daba74ca4
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Fix clang warnings that are disabled in the default build.
Change-Id: I4e773a24884db94acdc6c295d3f66da07cd8a5bd
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
QMake searches a .qmake.conf file to determine the source root of the
project, and a .qmake.cache to determine the build root.
If a .qmake.conf exists but no .qmake.cache in the build directory is
found, a build root would be set that is only valid if the build
directory is at the same depth as the source directory.
The invalid build root resulted in the creation of .qmake.cache files
at "interesting" locations (e.g. high up in the directory tree), a
potential cause for even more interesting build failures in the
future.
Fix this by splitting up the loop that determined build and source
root. Both are now determined independently of each other.
Fixes: QTBUG-76140
Change-Id: Ib5c922b87879fcf2f076298a69abcdbc4e8587b3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Those modules are TEMPLATE=aux, so they weren't triggering the file creation
here.
To make this work properly we have to:
- check for TEMPLATE aux in the right places
- add a dummy target to INSTALLS to actually trigger the creation
- initialize PRL_TARGET for aux templates
Fixes: QTBUG-75901
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Idce141629dd34287808bfffd159f92ac28c6c8b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Especially for header modules we don't want a 'Libs:' entry in their
.pc file.
Task-number: QTBUG-75901
Change-Id: I39037d3132e39dd360532e1425f794ebec28e0bd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMake code like
rplc.match =
QMAKE_PRL_INSTALL_REPLACE += rplc
led to the generation of invalid sed calls in the Makefile.
It is already actively checked for empty matches, but if *all* matches
are empty, the sed call looks like
sed foo > bar
which is invalid.
Task-number: QTBUG-75901
Change-Id: I173ed99826414dcf06253a15a247f7d067ee3977
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the whole value of 'name', not just the first element, and also
replace variables like ${QMAKE_FILE_IN}.
This fixes the file_copies feature (COPIES) for Visual Studio
projects, because for every entry in COPIES an extra compiler is
created with a name 'COPY ${QMAKE_FILE_IN}'. Before this patch the
name and the generated file filter would be just 'COPY'. However,
duplicate filters are being skipped by the VS project generator. All
but the first COPIES entry was ignored.
Fixes: QTBUG-76010
Change-Id: Icaa5d2cb8d88ae3ef8ce86220198bca1b9e673f5
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Invalid SUBDIRS values like
SUBDIRS += foo \
bar \ \
baz
would produce a Makefile with a sub-- target that will call the make
on the same Makefile again recursively, letting make run forever.
Ignore values like this and print a warning message.
Fixes: QTBUG-76068
Change-Id: I6ca0f8c8238249f1be02d8c311b4c148fd80e707
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
qmake automatically appends a dir_sep to a few directory paths (see
MakefileGenerator::initOutPaths), and various .pri and .prf files rely on
that. Anyhow, for non-MSys MinGW on Windows this creates a problem,
because mingw32-make will interpret the backslash in
OBJECTS_DIR = some_path\
to escape the following newline. We have been working around this
problem in various ways:
- winmakefile.cpp just removes the trailing \ for OBJECTS_DIR, at the
cost of not being compatible with logic in .prf/.pri files that rely on
the separator.
- winmakefile.cpp adds a '#avoid trailing-slash linebreak' comment for
DESTDIR. Anyhow, this does not seem to work for mingw32-make: If you
reference $(DESTDIR), the variable will contain trailing spaces.
- unixmakefile2.cpp duplicates a trailing \ for DESTDIR.
The last approach is now taken also for OBJECTS_DIR.
Task-number: QTBUG-75257
Change-Id: Ie8171a990a9ce1cfbf1b94037252ef2392313338
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Clang-cl couldn't find the header given to it by -FI when it isn't in
any of the included directories.
Additionally clang-cl 8 has a bug with exported templated classes with
inline methods that causes it to have missing symbols at link time. We
work around this.
Fixes: QTBUG-74563
Change-Id: I7becf05fa8edb07bd4cefe12bee3737e5e1dfa14
Reviewed-by: Yuhang Zhao <2546789017@qq.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The first replacement had missed objective-C++ code some places ourside
the src dir.
In C-files Q_DECL_NOTHROW is replaced with Q_DECL_NOEXCEPT as we still
need to turn it off when compiled in C mode, but can get rid of the old
NOTHROW moniker.
Change-Id: I6370f57066679c5120d0265a69e7e378e09d4759
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When installing directories, QINSTALL must not ignore contained hidden
files to be consistent with the old INSTALL_DIR.
Fixes: QTBUG-66835
Change-Id: I3a7c952dcac9732d5b17c5a258f87ca277b388d2
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The comment hints that it's fixing an issue in Visual Studio 2013, which
we don't support anymore.
In all supported Visual Studio Versions -Gm is actually deprecated
anyhow, and not set anymore by default. So I guess it's safe
to remove the special handling here.
Change-Id: I2e8ff85350ba651d9a763aabba7b6494ba88d82e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
...like the install commands before Qt 5.9 did.
This ensures consistent permissions. Also, we can throw away the code
that took care of removing and re-adding the read-only flag on Windows.
This reverts commit a0b5d6e60f with the
addition of preserving permissions when copying directories to properly
install app bundles (QTBUG-74912).
Fixes: QTBUG-74733
Task-number: QTBUG-74912
Change-Id: Iee6d7c5e86787dd3ada5e5e9441209d418100b1f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This reverts commit 3cdf46059a.
It seems change is causing regression & is reverted now to be able to
proceed with releases
Task-number: QTBUG-74912
Change-Id: Ib2365b96ee98fbbcc8853cc7f8726c157c1913a7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
...starting with Qt 5.0.0.
The text is manually inserted there, because \since does not work
within sections.
Task-number: QTBUG-74737
Change-Id: I0fe2d0a113d48be0266030c8466b062c6f743aab
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
For applications that set VERSION the installation targets of pdb
files were wrong in qmake's nmake Makefile generator.
Replace code that tries to reconstruct that target's versioned
extension with TARGET_EXT which already contains the fully resolved
target extension.
Fixes: QTBUG-74265
Change-Id: I9553a5f70170e077a59c866079ae51647ae80bef
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
...like the install commands before Qt 5.9 did.
This ensures consistent permissions. Also, we can throw away the code
that took care of removing and re-adding the read-only flag on Windows.
Change-Id: I06bc3af8817f18c016119fbcb7360800d6c129bd
Fixes: QTBUG-74733
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
- Fix qmake build
- Fix QtNetwork moc-ing, by including the moc files
inside the cpp files
- Fix sql odbc plugin by including QT_PLUGIN define
- Fix Boostrap to link against the Platform target, to get the
correct Unicode and WIN64 defines.
- Fix vulkan headers to be found
- Fix freetype bzip and png unresolved symbols / linker issues
when building minimal platform plugin (also need to make
sure to use the vcpkg toolchain instead of CMAKE_PREFIX_PATH
because then find_package is overridden, which does magic
to properly propagate static library dependencies).
- Fix qfilesystementry test not to be built without private
tests feature (it led to undefined symbols issues).
- Make sure to remove QT_NO_CAST_TO_ASCII define when building
QtCore, so that the qstringbuilder3 test builds
successfully.
Task-number: QTBUG-74140
Change-Id: I353d08392b604d55f8e62cdd8696d1e19a3c084a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Mark obsolete functions in QString as deprecated so they can be removed
with Qt6:
- QString::sprintf()
- QString::vsprintf()
Change-Id: I9b7748db95291c34b95ff3ad3e3aabc8215aeaae
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Commit 2327944d added the QMAKE_DEFAULT_LIBDIRS to the library search
paths without taking care that explicit library search paths should be
inserted before system search paths.
Copy the behavior of the UnixMakefileGenerator, esp. of commits
5bc9541e and e185f343.
Fixes: QTBUG-73959
Change-Id: I7e951f432bb5f71ce4bcdb18b7102b4380441181
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
QMake's strategy is generally "pretend everything is Latin 1", which
basically equals "do 8-bit pass-through". Change the handling of
QMAKE_SUBSTITUTES input accordingly to avoid conversion losses when
converting from and to UTF-8.
Fixes: QTBUG-72130
Change-Id: Id903bbd2afa99708c92fd09fab3db944aa819a94
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Two changes were needed:
- correctly link against frameworks
- use qcore_mac.cpp instead of qcore_mac_objc.mm, because we don't
link against AppKit
Change-Id: Ibd9d6d367a7fcdf7dce277c1b06d36c491294eeb
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Visual Studio doesn't support files being in multiple filters and
refuses to load such projects. Source files that appear in variables
that are mapped to file filters (SOURCES, TRANSLATIONS, ...) must not
be added to a second filter if they are input for an extra compiler.
Fixes: QTBUG-74004
Change-Id: Id2d752059c98d04e8154a7848c91f29a94bd092a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Use the writeDefaultVariables method also for the
Win32MakeFileGenerator. Remove the initializations that are already done
in Makefile::writeDefaultVariables.
Change-Id: I590cc5d7031de67dd830e6113849ab080dbf2325
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
This is in preparation of deprecating QLinkedList.
There is but one substantial change: Instead of copying the linked list,
we move it now, and instead of copying items between these two lists, we
use std::list::splice(), which just relinks nodes. It is a bit surprising
that the comment on the ProValueMapStack suggests references into the
container must remain stable, and then some code changes addresses by
making copies of the elements.
This was probably a bug waiting to manifest itself.
Since nothing else in qmake is using QLinkedList now, remove qlinkedlist.o
from the qmake build.
Change-Id: I08a5b0661466bf50ad8f9f8abf58bc801aef4ddc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is preparation of moving from QLinkedList to std::list, which is in
preparation of deprecating QLinkedList.
Change-Id: Ief259bc8c7178be5ca04812c6890cf65d86c069d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Users should use range constructors instead to do the conversion.
Keep conversion methods between QList and QVector as these will turn
into a no-op in Qt 6, whereas forcing people to use range constructors
would lead to deep copies of the data.
Change-Id: Id9fc9e4d007044e019826da523e8418857c91283
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
As the non prefixed variants are deprecated
Change-Id: I2ba09d71b9cea5203b54297a3f2332e6d44fedcf
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QRegExp includes can be found in several files where there's not even a
use of the class. This patch aims to avoid needless includes as well as
follow the "include only what you use" moto.
This patch removes a QRegExp include from the QStringList header which
means that there is likely going to be code breaking since QStringList
is used in many places and would get QRegExp in.
[ChangeLog][Potentially Source-Incompatible Changes] qstringlist.h no
longer includes qregexp.h.
Change-Id: I32847532f16e419d4cb735ddc11a26551127e923
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of hardcoding the target's extension to ".exe" we should rely on
target information available in Visual Studio. $(TargetFileName) is
documented as "The file name of the primary output file for the build
(defined as base name + file extension)." so it can be used instead of
$(TargetName) together with ".exe".
Change-Id: I103d8d13456910617b2d53c9c8f4e2935eb93015
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Conflicts:
tests/auto/widgets/itemviews/qheaderview/tst_qheaderview.cpp
Added tests/auto/testlib/selftests/expected_crashes_5.txt to work
round the output of the crashes test (which exercises UB, see
QTBUG-73903) being truncated on one test platform.
Change-Id: I9cd3f2639b4e50c3c4513e14629a40bdca8f8273
MSVC managed to trigger the this != &other assertion in
QString(const QString &other); so just skip creation of the
intermediate string in the function whose body tripped over this.
Change-Id: I687003cfc588531018c6069863ce2a76078c8e3f
Fixes: QTBUG-73802
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
make it "last one wins", consistently with regular libraries. this
isn't really relevant in qmake, because the order matters only for
static frameworks, which qmake defines out of existence.
note that specifying frameworks by full path does not work, so we
don't need to amend 9d76beee5 in that regard.
Change-Id: Ib027109339e1b5973c577d69906b6daf83ba9611
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
IoUtils::isRelativePath() didn't attempt to consider UNC paths, due to
a belief that qmake fails on them so badly that it wasn't worth the
extra code. However, it turns out Qt Creator's copy of this code does
need to take this into account, so start the change off in qmake's
version so as to keep in sync.
Task-number: QTCREATORBUG-21881
Change-Id: I3084b87c1d3ca6508255e94e04ac8db3ceaebb7e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QMake ignored every extra compiler that sets variable_out and whose
output does not have a builtin compiler (C++, C).
What the code wants to achieve is to ignore extra compilers that put
their output into variables that are handled "somewhere else already",
e.g. are in the otherFilters list. Evidence for that is to be found in
the addOnInput == true if branch.
Task-number: QTBUG-71283
Change-Id: I8c1d76febccacb450cd14ad7a1f4b87726832312
Reviewed-by: Brett Stottlemyer <bstottle@ford.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Use xilink for ICC and lld-link for Clang.
Change-Id: I13c74339ae9e3e5c97210afd20a53c7e474b873b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
