Add begin()/end() on QRegularExpressionMatchIterator, making
iterators over an iterator (like directory_iterator).
[ChangeLog][QtCore][QRegularExpression] The iterator object
(QRegularExpressionMatchIterator) returned by a global match
is now usable in a range-based for loop.
Change-Id: If3d31bd2e84e7d1fb626a0b3d2745914dff03e39
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use std::hypot() instead of sqrt() of a sum of squares.
This ensures length() can't be zero when isNull() is false.
Use length() in QLine::setLength() rather than duplicating that.
Clarify and expand some documentation; isNull() never said what
constituted validity, nor did unitVector() mention that is should not
be used on a line for which isNull() is true. Make clear that lines of
denormal length cannot be rescaled accurately.
Given that we use fuzzy comparison to determine equality of
end-points, isNull() can be false for a line with displacements less
than sqrt(numeric_limits<qreal>::denorm_min()) between the coordinates
of its end-points (as long as these are not much bigger); squaring
these would give zero, hence a zero length, where using hypot() avoids
the underflow and gives a non-zero length. Having a zero length for a
line with isNull() false would lead to problems in setLength(), which
uses an isNull() pre-test, protecting a call to unitVector().
(It was already possible for a null line to have non-zero length; this
now arises in more cases.)
Restored QLine::setLength() to the form it had before a recent change
to avoid division by zero (which resulted from underflow in computing
the length of a non-null line) but allow for the possibility that the
unit vector it computes as transient may not have length exactly one.
Add tests against {ov,und}erflow problems in QLine. Reworked the test
added during the divide-by-zero fix to make it part of the existing
test.
Pick-to: 5.15 5.12
Change-Id: I7b71d66b872ccc08a64e941acd36b45b0ea15fab
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
To match QString and QByteArray behavior
Change-Id: Ifce4a5dee6fc9077e855a24499f11f911e359cf5
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ChangeHandler's evaluated the binding to detect if the value actually
changed. This is a valid strategy for lazy bindings, but eager bindings
were already evaluated at that point, and thus the change would not be
detected.
Change the binding loop test, so that there isn't a fixpoint in the
binding loop, and we can still detect it. Changing the binding loop
detection code to deal with this case is left as an exercise for the
future.
Change-Id: Ia5d9ce2cd98a5780e69c993b5824024eb186c154
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The documentation of convert promised that “If the cast cannot be
done, the variant is still changed to the requested type”. This was not
the case so far, because we returned too early if canConvert returned
false.
This commit changes the behavior of the method to reflect its
documentation. The documented behavior seems more useful than the
alternative of not changing the metaType, at least for common use cases
inside qtdeclarative.
Change-Id: I09b5a5efb7344e76e93de278e35c7fb2b2f87dcd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The logic was complex and missed the UTF-8 UTF-8 case. It ended up
calling the UTF-8 to Latin1, resulting in an improperly-sorted
container, which in turn meant keys were not found when searched.
Fixes: QTBUG-86873
Pick-to: 5.15
Change-Id: I0d3ff441bec041728945fffd16379dec418637ca
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
We were missing 64-bit signed mul_overflow on 32-bit platforms and in
those where we did have it, the detection was awful (both for signed and
for unsigned). So if one of the parameters is a constant, we can
simplify the code generated.
Change-Id: Ia99afccf0c474e20b3ddfffd162a60d269eb1892
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The semantics are not very intuitive, and it opens a can of worms
with regards to what should happen with observers that observe
that property.
Change-Id: I6fb00b7693904b968224cc87d098bbd0ea776ba3
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
In the internal hash map implementation, we have to ensure that the
index is in the interval [0, size - 1].
Moreover, in setBinding we have to refetch the binding storage in case a
reallocation happened.
Change-Id: I11c6264f16537699c8908b647e2355a39ce87648
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Before we had the option of eager evaluation, we were able to use the
dirty flag to detect whether we are recursing. However, eager properties
will lead to a evaluateIfDirtyAndReturnTrueIfValueChanged call, and that
in turn will clear the dirty flag.
Introduce a new member to detect that situation, and set the bindings
error state to BindingLoop if we detect that kind of loop.
Change-Id: If40b93221848bd9e9422502318d992fad95b0b74
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It was already used many places directly making the code inconsistent.
Change-Id: I3b14bc6c333640fb3ba33c71eba97e78c973e44b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In the past, string formatting and parsing was done in the users
locale. Now, the C locale is consistently used in QDate(Time) and
localized functions are offered in QLocale. This patch reflects
this change in the documentation.
Change-Id: I81afda9063fa232d06841d63f69e19b49f8083f3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime's comparisons just compare milliseconds when both values are
local times and their statuses (hence DST-ness) match. It can do the
same for time-zones. While doing the same for UTC and fixed offsets
wins nothing, it also costs nothing, given that we're already checking
the spec.
Task-number: QTBUG-75585
Change-Id: Ib6d824569aba8def2f1319ef3a11cca6869a5b5e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add some unit tests using emojis as separator characters to check
utf handling.
Change-Id: I03c4bb5cd349e649c58e8a908c38a0185d80e722
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Binary provider:
It was not possible to remove the first glob in a local override,
because the mainPattern handling would re-add the first glob back.
XML provider:
It didn't support glob-deleteall.
Also, the order of the providers was wrong. We want to pick local
overrides first, the internal DB has to go last in the list.
Fixes: QTBUG-85436
Pick-to: 5.15
Change-Id: I9a4523f37cd962c730df9a6ed992bd01c075bf03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
tst_qguiapplication was missing an Info.plist file.
We can't directly reference the tst_qcoreapplication Info.plist
file like the qmake project does, because that breaks ninja
(says multiple rules create the same output file), so use a
copy instead.
Blacklist the qpluginloader loadMachO test when doing CMake builds.
The qmake projects use multiple custom rules to build the macho
plugins, which need to be ported to CMake.
Task-number: QTBUG-86053
Task-number: QTBUG-86792
Change-Id: Iaff2b2d5e9e84a457b4f2ffc011a580388498f00
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
MSVC has strange problems with it and we don't actually need it.
Change-Id: I2c443946d52d475208800f310b5f910da165c99b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Changes the definition of invalid QRects to be more consistent.
This simplifies the logic, and makes it possible for us to fix
normalized() so dimensions don't change.
The actual API is not changed except for inverted rects.
Only one use-case for the old normalized() function existed,
and has been reimplemented as QRect::span().
Fixes: QTBUG-22934
Change-Id: I29dad2952dc6c8e84a6d931898dc7e43d66780f3
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Do not use QVariant::Type anymore, instead use QMetaType
For some reason, this pushed the qvariant autotest over the limit where
MSVC requires the /bigobj flag, so add that one.
[ChangeLog][QtCore][QMimeData] The signature of the virtual retrieveData()
function has changed and now takes a QMetaType instead of a QVariant::Type.
Change-Id: Ib46773bd731ee2177b1ef74d8162d744be7017ef
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Resolve remaining Qt6 TODO
[ChangeLog][QtCore][QAbstractEventDispatcher] The signature of the abstract virtual registerTime function now takes a qint64 value for the interval parameter.
Change-Id: I10166ad5cfb455edc404d465a3731ff094a8977e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In order to modify a container through an iterable, we need the original
container to be mutable. The iterable, then, is not a conversion of the
container, but rather a view on the container. The concept may be
extended to other types.
In order to facilitate this, provide a set of methods in QMetaType and
QVariant similar to the convert family. The new methods are non-const
and expect the original value to stay available during the life time of
the view.
Change-Id: I363621033f7fc600edcea2acb786820ccba49c86
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
And add mutable iterators. This requires some refactoring of the
existing iterators.
Task-number: QTBUG-81716
Change-Id: I61b3a3e8c0df5fd449679257a29d9f0c3d19c4f0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The constructor taking an array literal will now stop at the first
null-terminator encountered.
And fromArray is introduced which only supports array literals.
Constructs a view of the full size. Explicit so it shouldn't be
surprising.
Change-Id: I1497c33a5c12453a95e87c990abe6335b2817081
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
1. Make the ctor unable to construct a QByteArrayView from
array literals other than 'char'.
With the new behavior it would either be (very likely) unintended to
pass e.g. a std::byte array to the ctor. And it would be confusing
because you would get different sizes based on signed-ness.
2. Introduce fromArray
Only supports array literals. Constructs a view of the full size.
Explicit so it shouldn't be surprising.
Change-Id: Ifdb55eb21057dfe7053b2561bd81e2c9825e9bc6
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use QVERIFY in test functions, and (void)tr.load outside.
Change-Id: I18d2eb3aeaf00f9f2bbe75d0a2d8b12569b541e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
It is lossy, so should be requested explicitly, using a dedicated
fromPixmap factory function.
Deprecate the constructor and assignment operator, and make the
constructor explicit.
[ChangeLog][QtGui][QBitmap] Implicitly constructing and assigning
to a QBitmap from a QPixmap has been deprecated, and the respective
constructor has been made explicit. Use the fromPixmap factory
function instead.
Change-Id: I68ce85b26c901415137b664a1db687021d48bae0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Change the rounding of negative half values to match standard C++
round, this will also allow future optimizations.
Change-Id: I8f8c71bed1f05891e82ea787c6bc284297de9c5c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When QCoreApplication object is instantiated, creation of the internal
message window is delayed until QEventDispatcherWin32::processEvents()
is called or socket/event notifier is registered. But, if the user uses
a native event loop, posted events are not delivered and timers do not
work.
This problem was fixed in a4ac4b3263 for
QWindowsGuiEventDispatcher in the same way. So, the risk of regression
is minimal.
Change-Id: I7bbb721d96046f64d21a7b0e553e46798b37189c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The test was previously using int; I shall be wanting to add tests
that exercise the bounds of qint64. Clean up the layout of the
test-row additions in the process of making a trivial change to them
all. Also const the QFETCH() types so we catch any use of non-const
methods on the values fetched.
Change-Id: I4b0187de71f5f14b39b4eabe8afd12a196f73d23
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of using imprecise QTest::qSleep() to estimate the
elapsed time, we trigger a single shot PreciseTimer and
gather all the data in lambda. We wait for lambda to be
executed - we give it twice as much time as is in theory
needed. Afterwards we verify all the data collected in lambda.
Task-number: QTBUG-82903
Change-Id: I0147b7cd2aaf4bf58a216caff167d2db8712541a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Some CMake files currently assume that QtGui is always enabled and we
get a configure-time failure without these changes.
Task-number: QTBUG-86053
Change-Id: I28e32c180c32221f32519017bac6b518a19d5983
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This requires refactoring of QMetaSequence, as they share a lot of
common functionality. QMetaAssociation provides a low level interface to
an associative container.
Task-number: QTBUG-81716
Change-Id: I273e00abd82f1549ba8803c323d82aa3a2d12ded
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
test.bjon file doesn't exist, however, it's still included in json.qrc.
That causes the test to fail on Android because it's using that resource
file.
Change-Id: I1e93076069073a1a621459a7d90aec5c0c03f768
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The macro BACKTRACE_HELPER_NAME is defined inside a block with
#ifdef __GLIBC__ which is not defined on Android, thus causing the test
to fail on Android.
Change-Id: I55e9b3e3bae2da182481239ad88107c36e3bd438
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This was overlooked when doing the conversion to use UTF-8 as the
standard 8 bit encoding for text.
Fixes: QTBUG-54942
Change-Id: Ib7b1b75b4d694648ab7143f6930b6bb1dcad19c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It has been deprecated and will live in qt5compat from now on.
Fixes: QTBUG-86480
Change-Id: I3744c7cee058d51d0fce633a174ab1a0f9235d2c
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
The seconds and milliseconds default to 0; so omit them when they're
zero, unless there's nearby code that contrasts nicely with them.
Change-Id: Iea049015e976f5a5209fe87a2cbfdae9de49a559
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These were now always defined, hence redundant.
Leave the #define in place so that we can verify we actually do always
define it, in a #else of an existing #if check on it.
Change-Id: Iea4c3dbc8f9982268bcf81da5ef17fe2ebf5c462
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTime() is invalid. Only the seconds and milliseconds are optional,
for valid times. Use startOfDay() for zoned times, QTime(0, 0) for
fixed-offset ones.
Change-Id: I3b65d5c3733ac83dc3a6c214859c3f56a480bb94
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Nothing used defDateTime(), nothing but it used defTime(). The only
other use of defDate() were from one test, which might as well make it
a local variable.
QDateTime's default is invalid, making invalidDateTime() redundant,
and the invalidDate() and invalidTime() it called had no other users.
Change-Id: I0e07ee58478bfe8ba680eafb52e2f73a962edd33
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
