pthread_yield() is a non-posix extension and was deprecated for a long time.
It's been removed recently at least from Fedora 35. Use sched_yield() instead.
Change-Id: Iae47fa09cc89005aa466446149be87e1b673c074
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
for QInputDevice::primaryKeyboard() and
QPointingDevice::primaryPointingDevice().
This also reverts ae9fefe3c8.
Fixes: QTBUG-100790
Pick-to: 6.3
Change-Id: Id02f277db25f823eb29e939e25801325df8e4076
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Found when retesting the testcase completer.zip from QTBUG-54642
Pick-to: 6.3 6.2 5.15
Change-Id: Id84eefeb3a33dc6d790cfa23755352381cc097a9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And remove their uses.
[ChangeLog][QtCore][Deprecation Notice] Deprecated QString::count()
and QByteArray::count() that take no parameters, to avoid confusion
with the algorithm overloads of the same name. They can be replaced
by size() or length() methods.
Change-Id: I6541e3235ab58cf750d89568d66d3b1d9bbd4a04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a test crashes it might leave local sockets, causing test failures
on subsequent runs due to the socket already being "in use".
Pick-to: 6.3
Change-Id: Ie1107c414f4819026907071c7b8281b2e27b8541
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
RFC2397 doesn't explicitly mention it, but references RFC2045, which,
in Section 2, states:
> All media type values, subtype values, and parameter names as
> defined are case-insensitive.
and goes on, in 6.1:
> mechanism := "7bit" / "8bit" / "binary" /
> "quoted-printable" / "base64" /
> ietf-token / x-token
>
> These values are not case sensitive
So regardless of whether "base64" is a parameter name, or a mechanism,
we need to treat it case-insensitively.
Use QLatin1String::endsWith() instead of QByteArray::endsWith(),
because the former takes Qt::CaseInsensitive while the latter would
need a toLower().
Add a test.
As a drive-by, use the same trick for the existing case-insensitive
comparison with "charset".
As a further drive-by, fix inappropriate uses of QLatin1String (=
where they don't prevent allocations).
[ChangeLog][QtCore][QUrl] Now recognizes the ";base64" marker in
"data:" URLs case-insensitively.
Pick-to: 6.3 6.2
Change-Id: Ife6ba771553aaad3b7c119c1fa631f41ffa8f590
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We want to mark the corresponding QColor ctor(s) explicit.
Use Qt::GlobalColor or the new QColor::fromString() instead.
Change-Id: I68bf75a094e6821b97682de5a0ffd975834d22d0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QObject's cache the binding status pointer to avoid TLS lookups.
However, when an object is moved to a different thread, we need to
update the cached pointer (as the original thread might stop and thus no
longer exist, and to correctly allow setting up bindings in the object's
thread).
Fix this by also storing the binding status in QThreadPrivate and
updating the object's binding status when moved. This does only work
when the thread is already running, though. If it is not running, we
instead treat the QThreadPrivate's status pointer as a pointer to a
vector of pending objects. Once the QThread has been started, we check
if there are pending objects, and update them at this point.
Pick-to: 6.2 6.3
Fixes: QTBUG-101177
Change-Id: I0490bbbdc1a17cb5f85044ad6eb2e1a8c759d4b7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QComboBox is included because it works like a button when it is not
editable. QGroupBox is included because it has a checkbox and QCheckBox
is a subclass of QAbstractButton.
Change-Id: Iad89259314e77f78c915dce83ec601df94c88941
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Qt Creator crashes when max is INT_MAX and min is -1, see bugreport.
Change-Id: I441e76c0ff87052083ed3d77e6085b186402e5d8
Fixes: QTBUG-101581
Pick-to: 6.2 6.3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Required for the API symmetry between QStringView and QLatin1String.
[ChangeLog][QtCore][QStringView] Added an overload of
QStringView::count() for QLatin1String.
Change-Id: Ic49a4b31e8f6f0969eff0f792654d23a60e06c49
Task-numer: QTBUG-98431
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Also contains some fixes which fix the Windows build, amending
e1b8257dee.
Pick-to: 6.3
Fixes: QTBUG-101294
Fixes: QTBUG-101304
Change-Id: I779f50fc705ed32f0314daf28b39b477a7fe925d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check that the expected overloads are selected in
QString/QAnyStringView overload sets.
Pick-to: 6.3
Change-Id: I38148c20a72eb60cf86844a39fe0ed419d2fa562
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It is customary for Qt types that can be constructed from string-ish
to provide a fromString() named constructor. QColor didn't, relying
instead on a set of overloaded implicit and explicit constructors.
Add the named constructor, with the intent to deprecate the string-ish
QColor constructors after a grace period.
To prevent new users from using known-to-become-deprecated API, mark
the old functions as \obsolete.
Also rename isValidColor() to isValidColorName(). The only reason why
these are lumped together in single commit is so that their docs can
refer to each other instead of having to temporarily refer to obsolete
API.
[ChangeLog][QtGui][QColor] Added fromString() and isValidColorName(),
both taking QAnyStringView.
Task-number: QTBUG-101389
Change-Id: I2857c728257ad2f14c7c968b45547bdf07c44b63
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Without this change, the test fails when run twice in a row. Also, skip
the test if we can't move the cursor.
Pick-to: 6.3
Change-Id: Ic45c073007d114fbd7825cedef6761c1e410b4af
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Also include the comprehensive tests for bool cast compilation which I
originally wrote to confirm that the QTEST_ASSERT() change should be™
correct.
Pick-to: 6.3
Task-number: QTBUG-101406
Change-Id: I9a2871bfd4be9999b7a720bec775bba7aeffbe24
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
QDateTimeEdit's default constructor instantiates the start of
1752-09-14 as its default earliest time; however Friedeman has seen
this triggering an assertion. The QDTE tests should be picking that up
anyway, but let's overtly test it in QDate's startOfDay testing, too.
Change-Id: Ifae87f2695ac3a7993c173a7c21809c87d5daa71
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The test crashed for some reason, so other testcases are also not
executed. Skip the test for now to enable more tests in the CI
Task-number: QTBUG-89402
Pick-to: 6.3 6.2
Change-Id: I5ad38645d1b8f86c64da7208c0ae4f66d126c7d9
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Most of the blacklisted tests were already fixed earlier.
The tst_QPlainTextEdit::adjustScrollbars() test needed a small fix
to show the window non-fullscreen, so that the scrollbar could appear.
Task-number: QTBUG-87423
Task-number: QTBUG-89402
Pick-to: 6.3
Change-Id: I849f411a5798053742323fc4db3fe30f2b690a8b
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This overload set may come in handy to cushion some of the concerns
regarding replacing QString functions with QAnyStringView ones.
Overloading with a Q_WEAK_OVERLOAD QAnyStringView function requires
users to jump through hoops in order to avoid the QString overload,
but with the Q_WEAK_OVERLOAD roles reversed, the QAnyStringView
overload becomes the preferred version, relegating the QString
overload to a fall-back to facilitate sharing where it makes sense
(e.g. for QObject::setObjectName()).
Pick-to: 6.3
Change-Id: Ic65ead505beee627976a306e2d430e800540a600
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Use two template parameters for the haystack and needle types, to test
all possible combinations of all argument types.
Note that the tests for QByteArray::count() are removed: it doesn't
make sense to have them in tst_qstringapisymmetry, and we already have
the symmetry tests for QByteArray in tst_qbytearrayapisymmetry.
Change-Id: I33901fd135eb7433f0d45300a7248aef4d40324a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Don't use the haystack as needle when testing count() for QLatin1String.
This wasn't caught earlier, since QLatin1String has no count() yet, and
the codepath was never tested.
Pick-to: 6.3 6.2
Change-Id: I2764070894ddce047eceaea52456e5a521252dab
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The test is no longer failing on Android in dev and 6.3, but still
failing in 6.2.
I think it's fixed by 63a35898f4
which is integrated into dev and 6.3
Task-number: QTBUG-87396
Pick-to: 6.3
Change-Id: I82e0aac1547f8e43353f0948cd3f91b4b8f9720e
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The operators are declared in the Qt::Literals::StringLiterals
namespace, to avoid collisions in the global namespace.
[ChangeLog][QtCore][QLatin1String] Added literal operator""_L1 that
converts string literals and chars to QLatin1String and QLatin1Char.
Fixes: QTBUG-98434
Change-Id: Ia945a6acf4b8d4fbbb5f803264e4d79d7b17a8da
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Our associative containers' iterator's value_type isn't a destructurable
type (yielding key/value). This means that something like
for (auto [k, v] : map)
doesn't even compile -- one can only "directly" iterate on the
values. For quite some time we've had QKeyValueIterator to allow
key/value iteration, but then one had to resort to a "traditional" for
loop:
for (auto i = map.keyValueBegin(), e = keyValueEnd(); i!=e; ++i)
This can be easily packaged in an adaptor class, which is what this
commmit does, thereby offering a C++17-compatible way to obtain
key/value iteration over associative containers.
Something possibly peculiar is the fact that the range so obtained is
a range of pairs of references -- not a range of references to pairs.
But that's easily explained by the fact that we have no pairs to build
references to; hence,
for (auto &[k, v] : map.asKeyValueRange())
doesn't compile (lvalue reference doesn't bind to prvalue pair).
Instead, both of these compile:
for (auto [k, v] : map.asKeyValueRange())
for (auto &&[k, v] : map.asKeyValueRange())
and in *both* cases one gets references to the keys/values in the map.
If the map is non-const, the reference to the value is mutable.
Last but not least, implement pinning for rvalue containers.
[ChangeLog][QtCore][QMap] Added asKeyValueRange().
[ChangeLog][QtCore][QMultiMap] Added asKeyValueRange().
[ChangeLog][QtCore][QHash] Added asKeyValueRange().
[ChangeLog][QtCore][QMultiHash] Added asKeyValueRange().
Task-number: QTBUG-4615
Change-Id: Ic8506bff38b2f753494b21ab76f52e05c06ffc8b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][Network][QNetworkCookieJar] It is possible to use
system's copy of publicsuffix database when it is available.
This behavior is enabled by default on Linux and can be
controlled using new command line switches -system-publicsuffix,
-qt-publicsuffix, -no-publicsuffix, and -publicsuffix=all.
Fixes: QTBUG-95889
Change-Id: I911e1a13c1422cdc35851953309fff064e7c5f26
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The existing API of QFlatMap did not allow efficient removal of
elements:
- std::remove_if does not apply, because it works by moving elements
back in the range onto those that need to be removed, which doesn't
work in flat_map's case, because, like for all associative
containers, the key in value_type is const.
- The node-based erase-loop (over it = cond ? c.erase(it) :
std::next(it)) works, but, unlike in traditional associative
containers, is quadratic, because flat_map::erase is a linear
operation.
According to Stepanov's principle of Efficient Computational Basis
(Elements of Programming, Section 1.4), we're therefore missing API.
Add it.
I couldn't make up my mind about the calling convention for the
predicate and, despite having authored a merged paper about erase_if,
can never remember what the predicate is supposed to take, so be fancy
and accept all: (*it), (it.key(), it.value()), (it.key()). This means
that unary predicates can either not be generic or must be properly
constrained to distinguish between pair<const K, V> and K, but that's
not necessarily a bad thing.
There's no reason to supply a Qt-ified removeIf on top of the standard
name, because this is private API and doubling the names would do
nothing except double the testing overhead.
Fixes: QTBUG-100983
Change-Id: I12545058958fc5d620baa770f92193c8de8b2d26
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
... if there aren't any.
Pick-to: 6.3
Change-Id: I8531e0c1c3ca41d1b1a9d55c9d11782bd63b6f76
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
As a drive-by, fixed misleading wording used in docs.
[ChangeLog][QtCore][Potentially Source-Incompatible Changes][QLatin1String]
Added QLatin1String(std::nullptr_t) constructor, which makes
QLatin1String(0) call ambiguous. To fix the ambiguity, nullptr
must be passed instead of 0.
Task-number: QTBUG-98433
Change-Id: I2b888aa23469343d78aa640dc39a6028b77165dd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
on Wayland
Task-number: QTBUG-100917
Pick-to: 6.3 6.2
Change-Id: I66c42bb0ceca83fd0531159c606d22c58b18b371
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In QPainter, clipping can only be done on whole pixels. The various
ways of specifying a clipping rectangle to the QPainter API have been
inconsistent in how fractional rectangles (either specified directly,
or as a result of fractional scaling) are mapped (rounded) to integer
coordinates.
Also, the mappings have not made sure to keep the edge-to-edge
property of clip rects under scaling. This is particularly important
when scaling QRegions with multiple rects, as QRegion is designed on
the assumption that an area can be described as a set of edge-to-edge
rects.
The fix rounds a clip rect identically with a fill rect. (Indeed, a
followup plan would be to merge QRasterPaintEngine's
toNormalizedFillRect() with the rectangle rounding function in this
commit).
Notably, a QRectF clip is now interpreted the same as a QPainterPath
clip describing the same area.
This modifies d9cc149995
Task-number: QTBUG-100329
Fixes: QTBUG-95957
Task-number: QTBUG-100343
Pick-to: 6.3
Change-Id: Iaae6464b9b17f8bf3adc69007f6ef8d623bf2c80
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
tst_qxmlstream was disabled because it crashed. It does not any more.
But it extracted an input zip archive in-place, which is not
possible on Android. To resolve this, input files are
copied to a temporary directory first.
Also, input directories were given to rcc. rcc has a problem
with recursive directories. To circumvent this,
the file list is created in CMake and then given to rcc.
Task-number: QTBUG-87671
Pick-to: 6.2 6.3
Change-Id: I88bb823b9e5c085404e263d4a648d65c9cd6024c
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
QNX tests are run under QEMU so have the same problem as b2qt
Pick-to: 6.2 6.3
Task-number: QTBUG-100948
Change-Id: I2abc8a4bca9e8ba414197721301d493296e7ce0b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This test crashed and prevents other testcases from execution.
The test requires a proper fix, but that's not trivial, so skipping
to enable more tests in the CI for now.
Task-number: QTBUG-101321
Pick-to: 6.3 6.2
Change-Id: I1bd4b1182cc868a36391a718457eae647675fc17
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
This test uses the cursor. However we have no cursor support on Android.
Skip the test instead of blacklisting it, because that is the correct
behavior.
Fixes: QTBUG-87389
Pick-to: 6.3 6.2
Change-Id: I1a2d2dd406b3d7da1bc70b51c2072a83d9a29ca5
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
