unlike before, the output dir is now important already during the project
evaluation phase, as finding .qmake.conf depends on it if .qmake.cache is
also present.
ChangeLog: fixed qmake -tp vc (and configure without -no-vcproj)
Change-Id: Ifdb95f3b38a70c0d08e71238059292e761dcfa53
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
note that the value is written verbatim to the qmake file, so additional
quoting may be required on the command line.
Task-number: QTBUG-30102
Change-Id: I02ca9a44fae82b6932982e6385508b8a304cc1e7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this affects only webkit when doing module-by-module installation, so it
went unnoticed.
Change-Id: Iab87f4a76fcb0fa9a1b1d6bcab9a73756e416120
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QT_CONFIG is supposed to contain configure output, not a list of
modules. for example, enumerating modules is not cleanly possible if
modules are mixed with other flags.
the conflation was merely historical, due to webkit and phonon doing
it this way in the preliminary qt4 modularization.
we now have a much cleaner way to query modules (qtHaveModule(<module>),
or less recently, !isEmpty(QT.<module>.name)), which is already used
throughout Qt.
the old way was supposed to be removed for 5.0 already, but it slipped.
better do it now, before people actually start using it.
Change-Id: Iabdf0cdfaab9cd674f634f4c6ece105b2039c850
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
modules which demand it (i.e., qtwebkit) need forwarding pris, etc.,
even when not making a -prefix build.
Change-Id: Id405be8763e94cc074854f799bd785e9cdf62e8e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Andras Becsi <andras.becsi@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
unlike unix' mkdir -p, windows' md complains if the directory already
exists. the workaround is a quite complex command, so the so far used
concept for assembling the command line from pieces was replaced with a
single template. for symmetry, adapt the makefile existence check to the
new concept as well.
QMAKE_CHK_EXISTS and QMAKE_MKDIR_CMD were added, with hard-coded
fallbacks (ugly).
QMAKE_CHK_FILE_EXISTS and QMAKE_CHK_EXISTS_GLUE (introduced in 5.0.0)
are simply deleted again.
QMAKE_CHK_DIR_EXISTS and QMAKE_MKDIR remain for legacy reasons, as qmake
emits them into the Makefiles, and custom commands may rely on their
presence.
Task-number: QTBUG-28132
Change-Id: I3d049cb5d26947e5c3d102d0c2da33afb2a95140
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
There is no definition for Yi, Tagalog...Braille in
QFontDatabase::WritingSystem, see the header file.
Change-Id: I0187b0ea23cdb49c4c3306217296d727d4983652
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
unlike the real compiler, moc does not have these directories built in,
so it would not find headers from a system install of qt.
Task-number: QTBUG-28870
Change-Id: I86f18cdc8953145190163746dae59f4e784f2d78
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Desktop OpenGL builds on windows correctly define APIENTRY whereas at
present the ES2 (ANGLE) builds do not. This leads to QOPENGLF_APIENTRY
having the wrong calling convention.
This fix is required for https://codereview.qt-project.org/#change,48660
but may also fix any random crashes that people may be seeing with
other Qt-wrapped OpenGL functions in ANGLE builds.
Change-Id: I8068c181d41be949d29168bd5ca1a181cc2245c7
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Change-Id: Ib6347360d678bbe54445ebb0680ad66d77a7f3c7
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There is no need to list the dependencies of the Widgets module.
Change-Id: I9469d4f352685f7122a258f1a44bd017fdc5b3a7
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I16e05b72e57473239b89498313ba7745ffa6a346
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It is flakey and often blocks integration.
Task-number: QTBUG-29730
Change-Id: I8acfc243ec6a6782b7f7d78fc27827f3fdc1ce52
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If a line segment isn't filled we keep using the same point of origin.
Task-number: QTBUG-26156
Change-Id: I20af8410a7039b69848f201ab62fd3c01b95531b
Reviewed-by: Titta Heikkala <titta.heikkala@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This bug was introduced by the XEMBED implementation (carried over from
Qt4, but there it applied to QX11EmbedWidget only): the _XEMBED_INFO
property is used to inform the *embedder* whether the embedded window
should be mapped when embedded.
Task-number: QTBUG-30084
Change-Id: I8d1c467874bdee3300a1b18b8174b2d62f498713
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The capitalization settings is attempted read via specialData->addFormats,
but the QTextCharFormat there is reset when added, and should instead be
accessed through specialData->addFormatIndices.
Change-Id: I190c419f07c3f7e803ca1d44059e8f538216b9ab
Reviewed-by: Pierre Rossi <pierre.rossi@gmail.com>
bootstrapping is only necessary if we are cross-compiling or have a
circular build dependency.
Change-Id: I17244457652ca9d4fc797043e57070c2ae3ee5d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this just factors out the common sources from the qdbus tools, to avoid
double compilation, and to clean up the project files.
Change-Id: I330d108ebffda4bc7c0e0e9ec00e51ddd48d5289
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we already have the syncqt'd include paths set, so use them.
Change-Id: I9d0047a79b493dd8b65f0f5495f3592ce2e2fb1d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it was already bootstrappable, but it was used only for configure.exe.
needed for bootstrapping lupdate
Change-Id: I0c2bf7db293dda47b3342dfe897a28b34383b1b4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this required making it compile with QT_NO_QOBJECT. of course this
disables anything related to threading and event processing.
needed for bootstrapping qmldevtools (qmlmin, lupdate)
Change-Id: I6f8bd3996ac7b6eee49a5b8a55143d358abe35ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the exclusion came in with the original winCE port. the reason for this
is not clear.
Change-Id: I8cd59d27fcc292186e5eef3238f56bad2cf320c1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
don't test for building specific tools when we actually only want to
know whether we are bootstrapping. so far, this was only redundant; with
the upcoming change of not bootstrapping unnecessarily it would be
outright broken.
Change-Id: I7600d8ebb14a4194640c50035e35a04263f2ccce
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is still the same trivial implementation with the only difference in that
that it properly handles surrogate pairs and combining marks.
This temporarily makes QTextEngine::itemize() insignificatly slower due to
using intermediate buffer, until refactoring is done.
Change-Id: I7987d6306b0b5cdb21b837968e292dd70abfe223
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Qt uses a lot of minor C++11 extensions such as long long, commas at the
end of enumerator lists, and extra ';' outside of a functions, and not all
of these can be silenced, so we build without warnings for C++11 extensions,
since we plan to enable C++11 at some point anyways.
Change-Id: I3ede2fb653c25475a3bd2b860c0c80c6cf6abef5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using JIT, pcre16_study causes a segfault.
Change-Id: I43a13579b240edcd75e64a4c291712a96a6ac273
Reviewed-by: Wolfgang Bremer <wbremer@blackberry.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Change the data type of PI from qreal to double, because qreal is defined as float and not as double on arm.
The testcase however expects PI to be a double value.
Change-Id: I003481071ecb2c1f54e6dcee9b450da2f1654969
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Laszlo Papp <lpapp@kde.org>
The values are Top/Left/Right/BottomEdge and values
specified so that it can be extended as flags later.
Change-Id: I67482265e14d89942a8f59bf09e9e3fadab8243f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
The 'silent' option to CONFIG will mangle QMAKE_CXX and friends by prepending
an @echo, which sdk.prf doesn't handle (it assumes the variables contain
names of executables, with optional arguments). Instead of teaching sdk.prf
generic command line parsing we ensure that silent.prf does its job at the
very end, when the tools have already had their paths fixed by sdk.prf.
Change-Id: I7093232e5cc37ed8106a3b838f42ad8f1a43fb86
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This should have been done right from the start,
instead we only made the documentation internal.
Also remove the classes from the BIC data.
Change-Id: I238a7a7cc5d26980b23931c78e7e5a4477d46920
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Since we use the Clang from Xcode's toolchain now, the OS version is
not relevant.
In practice this means we will use clang for Xcode 4.2 and up, which
means it's possible to use clang also on Mac OS 10.6 (Snow Leopard),
where Xcode 4.3 is not available.
Change-Id: I9817e237cdd82d10b93aaaa3c90e35767cdca751
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As this is a static library, no export macro is needed at all. With
the wrong export macro, attempting to use this library fails on Windows.
Change-Id: I618d7f02e374761fc8d8a5a0afb8d6d80e380389
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Expanding on the change fixing QTBUG-24762 with the realization that any
line needs to be drawn in a consistent way regardless of system or
painter clip, not just dashed lines.
Task-number: QTBUG-25036
Change-Id: Ief7ef19cc92c52e7d792500a581a072ba032767e
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Currently, QCoreApplication::startingUp() returns true even after
a QCoreApplication has been constructed. This patch makes it return
false after it has been constructed and adds checks to QApplication
and QGuiApplication to ensure that it returns true within the
constructor of these classes.
Task-number: QTBUG-2591
Change-Id: Ie511522d35b5658c20be43dd112eae18c205277f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
