Change qtConfig(opengl(es2)?) to qtConfig(opengl) as that covers
the case without any regular expression.
Change-Id: I935e3150f87e195e8bd3d0e55b4ed43572b131cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Update URLs in jennifer.xbel and remove frank.xbel, which
has too many outdated URLs
Change-Id: I8cbc1e3988f45230f849e68202780c76cf4353d9
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
xcode variable expansion should be done exactly when xcode is used.
Change-Id: Icea8cb7bf9a51811052789bd66354b1b165127d6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this is a vestige from an earlier version of the watchos introduction.
amends 57378a108.
Change-Id: I7d15149b94d12d84e041079b563175bd4e385d50
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
A separate flag is no longer needed now that simulator and device builds
are not exclusive any more (*) - both 'simulator' and 'device' being set
at the same time is a sufficient indication (uikit/default_pre.prf sets
this up according to the simulator_and_device feature and the
QMAKE_MAC_SDK variable).
(*) xcodebuild mode actually still uses exclusive builds, but this is
activated locally in uikit/default_post.prf, and uikit/xcodebuild.prf
implements the actual build passes manually anyway, so this change does
not affect it.
Change-Id: Idf173a7bfeb984498d3a49ed6b8d1a16da6c2089
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the opengl feature is defined in the gui module.
Change-Id: Ibf63395729540092ca82ee4ffc4e2ff4971c2a29
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Protection against short reads was already half implemented,
blockSize was being sent by the server but never used by the client.
Also, blockSize was bumped to quint32: If you're in a position where
short reads can happen then quint16 is probably not enough to hold the
size of your data. On Linux I could only reproduce short reads for
messages > 500K.
Change-Id: I191a3d781da1d8a119debbdafae641c8340a1da2
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
5971b88e is not needed in new configure.
This merge also reverts "fix QMAKE_DEFAULT_*DIRS resolution with
apple SDK", 2c9d15d7, because it breaks iOS build with new
configure system.
Conflicts:
mkspecs/features/default_pre.prf
mkspecs/features/mac/toolchain.prf
mkspecs/features/toolchain.prf
src/dbus/qdbusconnection.cpp
src/plugins/sqldrivers/mysql/qsql_mysql.cpp
src/sql/drivers/mysql/qsql_mysql.cpp
src/widgets/widgets/qmenubar.cpp
src/widgets/widgets/qmenubar_p.h
tools/configure/configureapp.cpp
tools/configure/environment.cpp
tools/configure/environment.h
Change-Id: I995533dd334211ebd25912db05b639d6f908aaec
... to the new qmake based configuration system.
This removes the old qfeatures.txt (distributed over configure.json
files) and qfeatures.h (distributed over qconfig-<module>.h files).
qfeatures.prf is gone without replacement, as attempts to use it would
lead to followup errors anyway.
Change-Id: I1598de19db937082283a905b9592d3849d2199d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This example uses QProcess which is not available on UIKit platforms.
Change-Id: I126d20369ccf307579a60956de7769e92e17548a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
As of version 10.12 (Sierra), the name of Apple's desktop operating
system will be macOS. Change the occurrences where the Mac platform
is discussed to use a macro \macos, which expands to 'macOS'. This
helps with adapting to future renaming.
Update the instructions on mac-specific Q_OS_* macro usage.
Add a \target for the old 'Qt for OS X' topic to keep links working
for other documentation modules that try to link with the old name.
Change-Id: Id33fb0cd985df702a4ae4efb4c5fd428e77d9b85
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
This is only when the attached MIME data contains text, and we
fall back to rendering that text into a pixmap. It requires
getting the device pixel ratio from the source which, for now,
may be a QWidget or a QWindow. Other cases may exist, but that
would bring more dependencies than desired.
Similarly, it fixes the draggabletext example. Other examples
would require either to get updated pixmaps or change substantially
in order to support HiDPI (e.g., the fridgemagnets example).
Change-Id: I66198214233e3e06c87505744e2aaa9691fe1bb6
Reviewed-by: Filipe Azevedo <filipe.azevedo@kdab.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
At least with the eglfs platform plugin, the QBackingStore constructor
results in a null pointer access if done before creation.
Change-Id: I2e78e70700fa48499a35c55797e1b962b6e6285a
Reviewed-by: Rebecca Worledge <rebecca.worledge@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
- Simplify the code, remove unused members
- Fix the translations of plurals to use %n
- Add tooltip displaying full paths in list
- Add context menu allowing to copy the name and open
- Display the correct slashes on Windows
- Connect the returnPressed() signals of the line edits
- Make the search recursive
- Do not search binary files by checking the mime type
Change-Id: I3663799c88931db1f58c03ea35211e7ab03737ec
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
- Port to Qt 5 connection syntax.
- Remove unneeded member variables.
- Adapt to screen size.
- Add a tab widget with a hex dump view to the preview dialog.
- Handle conversion errors in preview dialog,
add status label displaying errors and warnings about failures
and invalid characters encountered.
- Fix translated messages.
Change-Id: I916100c903e73d0d2326523753ed7398b1c34df0
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
- Introduce a common header file for client and server;
- Update license headers;
- Fix minor issues.
Change-Id: I3fc42fd5ba32141c702fc6679a27bf0b6a16fd26
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Use Qt 5 connection syntax.
- Introduce helper function to calculate the square size, remove
the existing 24 pixel limitation since that makes it impossible
to render 20pt fonts.
- Add filter chooser for font filters.
- Add menu and info dialog showing DPI and default fonts.
- Streamline code
Change-Id: I0cd4d0475b5a7ed3c475de7a413abebbe688dfe2
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Show QMimeType::genericIconName() to description pane.
Change-Id: I698d07084b6396469686057ea53e2f497fdbe287
Reviewed-by: David Faure <david.faure@kdab.com>
Examples should show idiomatic Qt, and QSignalBlocker is idiomatic
since it's inception in Qt 5.3. Just updating the examples was
forgotten.
This commit makes good for that.
Fix coding-style issues as a drive-by.
Change-Id: If138e87ea2ab7a444599734113f7cc6df11fb42d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
