Just sending the event to the embedded widget is not enough, we
have to perform hit-testing for the different touch points, and
send the event to the child widget under the point. Fortunately,
QApplicationPrivate::translateRawTouchEvent provides the logic
that generates multiple events for groups of touch points.
Since that helper always sent events spontaneously, add an
optional parameter to allow sending of non-spontaneous events.
Add a test case that simulates touch events to different widget
configurations inside a QGraphicsProxyWidget.
Fixes: QTBUG-67819
Task-number: QTBUG-45737
Pick-to: 6.2 6.1 5.15
Change-Id: Iffd5c84c64ee2ceadc7e31863675fdf227582c81
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The nested widget might be a QGraphicsView as well (documented to be
supported), and QGraphicsScene maintains it's own activation status by
counting Window(De)Activate events. We need to make sure that the
embedded widget is informed about its activation status so that deeper
nested children can receive focus.
Forward WindowActivate/Deactivate events to the nested widget, which
will pass it on to all its children. Add test case, which without this
fix fails when verifying the inner scene's isActive state, or later
when testing that focusInEvent is delivered to the embedded widget.
Fixes: QTBUG-94091
Pick-to: 5.15 6.1 6.2
Change-Id: I4e0ecef50685ed081d15c7f76b6c1a4a40ed2682
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When forcing software scrolling through QScroller::scrollTo,
it will start from (0, 0). QGraphicsViewPrivate::canStartScrollingAt
should consider the locationof points, not just the flags of item.
Fixes: QTBUG-70255
Pick-to: 5.15 6.1 6.2
Change-Id: Iebdd5568baa3bdb41c705204dadb2895cfe9c0e2
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
In order to fix QTBUG-95552 properly we have to add APIs to
QGraphicsSceneWheelEvent that informs QGraphicsProxyWidget about
whether the event is a high-precision event where Qt grabs the
wheel.
If it is, then the wheel grabber will be the QGraphicsView's viewport,
and any wheel event sent to any widget will be grabbed by it. This
results in infinite recoursion, partly fixed in change
I78400ceae8da7a4e22a988c06ed58f99f1a979f4.
The proper fix is to re-grab the wheel by the embedded widget
if it (or any of its children) accepts the ScrollBegin event (and if
not, return the grab to the QGraphicsView).
This fixes the scenarios that failed in the test case, so now scrolling
through nested widgets and scrolling in nested widgets works as the
user would expect.
Fixes: QTBUG-95552
Pick-to: 6.2
Change-Id: I3e1f31cbff999c70f8c63c034f77cd2ae567d7e3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
For high-precision wheel scrolling sequences, the widget that gets
the first (typically ScrollBegin) event grabs the wheel. Qt directs
all future wheel events within the same sequence (i.e. until ScrollEnd)
to that widget.
QGraphicsView passes wheel events through to the item under the mouse,
and QGraphicsProxyWidget implements wheelEvent to forward a synthesized
QWheelEvent to the embedded widget. Since QGraphicsView's viewport has
already grabbed the wheel, any forwarded event would end up back in
QGraphicsView, resulting in infinite recursion (if the assert doesn't
fail first in debug builds).
The correct fix requires that QGraphicsProxyWidget knows that this is
a high-precision wheel event, allowing it to adjust the wheel grabber
temporarily to the embedded widget. However, QGraphicsSceneWheelEvent
doesn't provide this information.
To fix the infinite recursion, mark the generated event as synthesized
by Qt (but still send it spontaneously to enable propagarion within
the proxy widget hierarchy). In QApplication's notification routine,
interpret such events then to override the wheel grabber.
Add a test case for the various scenarios. This 6.1 compatible fix
does not pass all situations. A follow up commit that introduces the
missing APIs to QGraphicsSceneWheelEvent then fixes those as well.
Task-number: QTBUG-95552
Pick-to: 6.1 6.2
Change-Id: I78400ceae8da7a4e22a988c06ed58f99f1a979f4
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Change the rounding of negative half values to match standard C++
round, this will also allow future optimizations.
Change-Id: I8f8c71bed1f05891e82ea787c6bc284297de9c5c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change shouldn't matter much to widgets, since style names
there are case insensitive. But for controls style names are
case sensitive, and in that case, "macOS" looks more correct.
Change-Id: Ia1d442bce465692ff58fecba1cc68ecbb2e52549
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change the name/key of the style to 'macos'. Besides the
name 'macintosh' being archaic, we also need this
change to avoid creating 'macintosh' style folders
in QtQuickControls, now that we plan to use QPlatformTheme
also there to resolve the style.
[ChangeLog][Widgets][QStyle] The 'macintosh' style
has been renamed to 'macos'.
Change-Id: I14b8a8b4dbd369e7a7d16b94e4ad27e501e7e8d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Both normal and relaxed constexpr are required by our new minimum of
C++17.
Change-Id: Ic028b88a2e7a6cb7d5925f3133b9d54859a81744
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
It is unnecessary to create a QList container just for comparison.
Split out helpers for comparing sequence sizes and sequences from
qCompare(QList) and add a template for an array with a non-type template
parameter for the size.
One can then write something like:
const int expected[] = {10, 12,...};
QCOMPARE(QFontDatabase.pointSizes(...), expected)
Unfortunately, any commas in such an array will be misread by macro expansion
as macro argument separators, so any expected array with more than one entry
needs an extra macro expanding __VA_ARGS__.
Change-Id: Ie7c8dc20bf669bbb25f6d7f8562455f8d03968c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This test doesn't test whether window activation works, so there is
no reason to fail the test if it doesn't. Instead, abort the test, so
that we can record it as a skipped test.
Change-Id: Ia44308ef17f110d40c6455d7ee85d90914face4f
Fixes: QTBUG-22455
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Reviewed-by: Levon Sargsyan <levon.sargsyan@qt.io>
Same pattern as QtQuickWidgets. Gets rid of QtOpenGL's dependency on QtWidgets.
Task-number: QTBUG-74409
Change-Id: I4f9b55c23e25a1e0519734037b768a16e870c7d2
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
These tests fail locally, and have been reported to
fail on the CI system.
Change-Id: Ia76bb15c288af4171ebe47b3c30f3651a63df3f2
Task-number: QTBUG-75786
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Replace QWidget::repaint() with update() + wait until the paint event is
received.
Task-number: QTBUG-80237
Change-Id: I57da7cd8fa119344484b849a88729bca7b48616c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Either by testing for platform name or window activation.
After this gets in, we can enable widget tests in the Wayland bot, which
hopefully will reduce the number of regressions in the Wayland plugin.
Fixes: QTBUG-62188
Change-Id: I71ce8abd6b5891e5b953126b1c35345892585931
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The enum OptimizationFlag::DontClipPainter is deprecated and not used in
the code since Qt4 times. Therefore also mark it as deprecated so it can
be removed with Qt6
Change-Id: I318a55cf42e7a233d13d4ec0144e1977251f5c92
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The sendMouseMove() function calls QTest::mouseMove(),
which again calls QCursor::setPos() to move the cursor.
It then creates and sends a MouseMove event, using
the constructor which picks up the global position
by calling QCursor::pos().
On macOS 10.14, QCursor::setPos() may silently fail
if the user does not grant the application permission
to move the cursor (via a dialog). As result of this
the mouse move event gets an incorrect global position.
Provide the global position directly when creating
the event to make sure it gets the correct value.
Task-number: QTBUG-75786
Change-Id: I3e8df450fea802783a3d1dbe471753f502b42de3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Done-with: Sona Kurazyan <sona.kurazyan@qt.io>
Change-Id: I5b584cbe468429c53c2d661a0d7957d74e7ad691
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
