Instead of QCoreApplication::quit() directly calling exit(0), which would
leave QGuiApplication and client code out of the loop, we now send the
Quit event, and let it pass through event delivery, before finally ending
up in QCoreApplication::event(), where we call exit(0).
This has the advantage that QGuiApplication can ensure all windows are
closed before quitting, and if any of those windows ignore the close
event the quit will be aborted. This aligns the behavior of synthetic
quits via QCoreApplication::quit() with spontaneous quits from the
platform via QGuiApplicationPrivate::processApplicationTermination.
Clients who wish to exit the application without any event delivery or
potential user interaction can call the lower level exit() function
directly.
[ChangeLog][QtGui] Application termination via qApp->quit() will now
deliver Quit events to the application, which in turn will result in
application windows being closed as part of the application quit,
with an option to cancel the application quit by ignoring the close
event. Clients who explicitly want to exit the application without
any user interaction should call QCoreApplication::exit() explicitly.
Task-number: QTBUG-45262
Task-number: QTBUG-33235
Task-number: QTBUG-72013
Task-number: QTBUG-59782
Change-Id: Id4b3907e329b9ecfd936fe9a5f8a70cb66b76bb7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is a source incompatible change for widget implementors.
Leaving the old enterEvent as a virtual overload is problematic due to
shadowing. Best to make a clean cut, widget reimplementors will get a compile
time warning if they mark their override as such, or if they try to call the
parent class implementation.
Addresses ### Qt 6 comment.
[ChangeLog][QtWidgets][QWidget] The virtual enterEvent handler now receives
a QEnterEvent, which contains information about mouse position and button
states, rather than a plain QEvent.
Change-Id: I233f594fd79c0c090983b3db8532913d00132fde
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Having three methods with the same name doing different things is
unnecessarily confusing, so follow the standard naming convention in
Qt and call the getter of the resolve mask resolveMask, and the setter
setResolveMask. These methods were all documented as internal.
The publicly documented resolve() method that merges two fonts and
palettes based on the respective masks remains as it is, even though
'merge' would perhaps be a better name.
Change-Id: If90b1ad800834baccd1dbc38fc6b861540d6df6e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
And remove one of the type id to name mapping that still
existed in QMetaType. QMetaTypeInterface can provide that,
so there's no need to have a second copy of the data.
qMetaTypeTypeInternal() can still map all the names of all
builtin types to ids. That functionality is for now still
required by moc and can't be removed yet.
Change-Id: Ib4f8e9c71e1e7d99d52da9e44477c9a1f1805e57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Export some private functions from QUtf8 to resolve
undefined symbols in Qt5Compat after moving QStringRef.
Task-number: QTBUG-84437
Change-Id: I9046dcb14ed520d8868a511d79da6e721e26f72b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Follows the QWindow semantics, and is a replacement for creating
a QWidget with a QDesktopScreenWidget as the parent.
We can now remove much of the special handling of QDesktopWidget and
the Qt::Desktop window type, and get rid of QDesktopScreenWidget.
Add a manual test that allows local testing. Our CI environments
only have a single screen, and no multi-head display server setup
which is the primary case where QWidget::setScreen is interesting.
For the more common case of a virtual desktop, QWidget::setScreen
has no real impact (just as QWindow::setScreen doesn't).
Change-Id: Id0099e069d316741bacd8c795c396ccad37be297
Fixes: QTBUG-85483
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It was marked internal anyway. Use the constructor taking a
QMetaType instead.
Change-Id: I15b9cd0911aac063a0f0fe0352fa2c84b7f7c691
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both normal and relaxed constexpr are required by our new minimum of
C++17.
Change-Id: Ic028b88a2e7a6cb7d5925f3133b9d54859a81744
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
A QWindow should only become Active when it's inside an
NSWindow that is Key. If the NSWindow is not key, we need
to wait for it to be so, and handle window activation
from QCocoaWindow::windowDidBecomeKey() instead. Otherwise
Qt will report a QWindow as Active when, in reality, it
is not.
Change-Id: Ib7e63b374f26af527a668c7f7d863c4168a4446d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Before 0a93db4d82 we would polish the
application palette even when it was the default palette, as we
always recreated the system palette each time a style was set.
After the change we skipped polishing the palette unless it was set
by the user, under the assumption that the style would set its
own default palette if it wanted to override the system palette.
This turned out to break the style's ability to slightly tweak the
palette via polish (versus the more full on standardPalette approach).
We now polish both the default palette and user palettes, and we do
so as part of the normal palette update logic. This ensures that
the style also gets a chance to polish the palette when the platform
theme changes.
The polish will not have an effect on the resolve mask of the palette,
as the polish is conceptually the same as a base palette, and should
not affect e.g. Qt::AA_SetPalette.
Fixes: QTBUG-85469
Fixes: QTBUG-85188
Pick-to: 5.15
Change-Id: I869e9c442b177de4f1dc49eb75220709306f4d12
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change the functions to operate in float and add the
QPoint versions as overload calling them. This is
more in-line with the event accessors using float
and allows for removing some workarounds using a delta when
converting touch points.
Leave QPlatformWindow::map(To/From)Global() as is
for now and add helpers for float.
Change-Id: I2d46b8dbda8adff26539e358074b55073dc80b6f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Some goals that have hopefully been achieved are:
- make QPointerEvent and QEventPoint resemble their Qt Quick
counterparts to such an extent that we can remove those wrappers
and go back to delivering the original events in Qt Quick
- make QEventPoint much smaller than QTouchEvent::TouchPoint, with no pimpl
- remove most public setters
- reduce the usage of complex constructors that take many arguments
- don't repeat ourselves: move accessors and storage upwards
rather than having redundant ones in subclasses
- standardize the set of accessors in QPointerEvent
- maintain source compatibility as much as possible: do not require
modifying event-handling code in any QWidget subclass
To avoid public setters we now introduce a few QMutable* subclasses.
This is a bit like the Builder pattern except that it doesn't involve
constructing a separate disposable object: the main event type can be
cast to the mutable type at any time to enable modifications, iff the
code is linked with gui-private. Therefore event classes can have
less-"complete" constructors, because internal Qt code can use setters
the same way it could use the ones in QTouchEvent before; and the event
classes don't need many friends. Even some read-accessors can be kept
private unless we are sure we want to expose them.
Task-number: QTBUG-46266
Fixes: QTBUG-72173
Change-Id: I740e4e40165b7bc41223d38b200bbc2b403e07b6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Qt::UNICODE_ACCEL had no effect since at least Qt 4.0. We can drop
it in Qt 6. The whole Qt::Modifier enumeration is still widely
used, so we can't drop it yet, but we should aim at doing so in
Qt 7. Add a note.
[ChangeLog][QtCore][Qt::Modifier] The Qt::UNICODE_ACCEL enumerator
has been removed. It had no effect since Qt 4.0.
[ChangeLog][QtCore][Qt::Modifier] Usage of the enumerators in
the Qt::Modifier enumeration is discouraged. The enumeration
will likely get removed in the next major version of Qt.
Change-Id: If25f30d920878d32903b91a38044f5da042c7eab
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
And generate a few more test projects that were missing.
Change-Id: I5df51106549aa5ae09bc3c42360e14b143719547
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Amend d934fd7f54, which was too naive in
assuming that any change to the popup stack while a popup had been
pressed into should result in mouse move events to be delivered without
buttons.
Instead, add a new flag that is set explicitly when the qt_popup_down
widget is closed, and remove buttons from the move move events only when
that flag is set.
Add the sorely missing test case as well, even if we have to accept that
not all behavior can be tested reliably. Ie. on macOS, the simulated
mouse event differs from the event we do get from the QPA plugin or the
system; on Xcb, some of the behavior depends on the window manager.
This is something we could try to clean up for Qt 6.
Change-Id: Ibf0a0a6fb7d401915057365788947e5a35aa20c3
Fixes: QTBUG-84926
Task-number: QTBUG-82538
Pick-to: 5.15
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Fixes regression introduced in b4981f9d4c,
due to which it was possible to back-tab into a widget even though it or
its focusProxy had a NoFocus policy.
As a drive-by, split the complicated if-statement up a bit for improved
readability.
Change-Id: Ib0ac2604076e812e340b11534c23ae8ae958d082
Fixes: QTBUG-76924
Pick-to: 5.15 5.12
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Remove QDestopWidget public header, simplify the implementation that
maintains a Qt::Desktop type QWidget for each QScreen, and turn
QWidget's initial target screen into a QScreen pointer.
QApplication::desktop() now takes an optional QScreen pointer, and
returns a QWidget pointer, so that applications and widgets can get
access to the root widget for a specific screen without having to
resort to private APIs.
QDesktopWidgetPrivate implementations to look up a screen for an index,
widget, or point are now all inline functions that thinly wrap
QGuiApplication::screens/screenAt calls. We should consider adding those
as convenience APIs to QScreen instead.
Note that QWidget::screen is assumed to return a valid pointer; there is
code that handles the case that it returns nullptr (but also code that
trusts that it never is nullptr), so this needs to be defined, verified
with tests, and asserted. We can then simplify the code further.
Change-Id: Ifc89be65a0dce265b6729feaf54121c35137cb94
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Many of these were generated by clazy using the new qevent-accessors check.
Change-Id: Ie17af17f50fdc9f47d7859d267c14568cc350fd0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Starting from Qt 5.11 QWindow::event is called after QDialog::closeEvent
which would cause a crash if "delete this" was called on closeEvent. The commit
that changed this was e0b5ff4ad5. Added
a check before QWindow::event call utilizing QPointer to prevent the
function call in case object is destroyed by a user in close event handler.
Change-Id: I64a4a0f3271714e55bf7e806177f0d8b39b67fa3
Fixes: QTBUG-84222
Pick-to: 5.15 5.12
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Tests focusProxyAndInputMethods and
multipleToplevelFocusCheck will be blacklisted
Task-number: QTBUG-84259
Change-Id: I7d5baf1e700192eed3c7c8dcfe671e247f11b8c7
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The class is documented as obsolete, and the majority of APIs is marked
as deprecated. In this first phase, remove all explicitly deprecated
APIs and trivial implementations.
The test case is complete removed; what's left when code that uses any
of those deprecated methods is removed is not testing anything
meaningful.
For some methods, there is no practical replacement using QScreen yet,
and QDesktopWidget is still used in QWidget internals. Those require
refactoring to only use QScreen before the rest can be removed.
Change-Id: I8f7c968ec566820077221d37b817843758d51d49
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Rather than have a paletteChanged() signal which can be connected to for
tracking when the application palette has changed, then it is better to
use the event that is sent to all windows and the application itself.
That way it is easy for a window/widget or item that cares about the
change to the application font to catch it in the event() function.
[ChangeLog][QtGui][QGuiApplication] Deprecated paletteChanged() signal
in favor of QEvent::ApplicationPaletteChanged.
Change-Id: I95da211e30590e357007cc14d8ee266baceba7b3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... without moving the mouse.
This allows to update drop action and cursor.
Task-number: QTBUG-56218
Task-number: QTBUG-82934
Pick-to: 5.15
Change-Id: I8b0ac2a008a9dbcc4c2d6abce282e6f169c2f542
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Handle wheel grabbing via wheel_widget in a single place, and
propagate events in the same way for all (spontaneous) events.
Handle ScrollMomentum the same way as ScrollUpdate to allow
partial sequences.
Fix the incorrect ignoring of wheel events by default; like all
other input events, they are now again accepted by default and
ignored in the default event handler implementation of QWidget.
This way, implementing the handle suffices to accept the event.
Note that QWidget::wheelEvent doesn't need to be changed, as the
event is ignored there today (an oversight of the change made in
f253f4c3, perhaps).
This also fixes changing of direction of a wheel event while
the event sequence is grabbed by a widget.
Change-Id: Ia0f03c14dede80322d690ca50d085898a0497dbe
Fixes: QTBUG-67032
Task-number: QTBUG-79102
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This amends 23b998fa45, and the commits
3e7463411e and
947883141d. This change restores the
pre-5.13.1 behavior of setFocusProxy to not move focus away from a
previously set focus proxy.
With the previous changes, focus would move away from a proxy when a
new proxy is set, if the old proxy had focus. While there are arguments
in favor of this behavior, it is a change of behavior that shouldn't
be introduced to 20+ years old functionality in order to fix the real
bugs addressed by the initial commits.
Instead, move focus only to the new proxy when the focus widget was
the widget that gets a focus proxy.
[ChangeLog][QtWidgets][QWidget] setFocusProxy no longer moves focus
away from a previously set focus proxy, restoring pre-Qt 5.13.1
behavior.
Change-Id: Icf2ad7cba5b860014aeef91cb274c442a2ab9d42
Fixes: QTBUG-83720
Pick-to: 5.15
Reviewed-by: David Faure <david.faure@kdab.com>
For kinetic wheel events, Qt tries to make sure that all events in the
stream go to the widget that accepted the first wheel event.
It did so by directing all events from the stream to the widget from
which the spontaneous event was returned as accepted.
However, that widget might have passed the event on to some other
widgets; e.g QScrollArea forwards wheel events from the viewport to the
relevant scroll bar. The event might then have come back accepted only
because parent propagation kicked in (the scrollbar might not accept
the event, so the parents get a chance, and some parent's scrollbar
ultimately accepts the event).
In this scenario, the wheel widget would be the viewport under the
mouse, when it should have been the scrollbar of the parent. The
next events from the stream were then delivered to a widget that didn't
scroll; and parent propagation is not (and should not be) implemented
for the case where Qt has a wheel widget.
Instead, make the first widget that accepts any initial wheel event
the wheel widget, even if the event was not spontaneous. With this
change, all events from the stream are delivered to the widget that
actually handled the event. That has the effect that ie. a viewport
of a scroll area only gets the first event; all following events are
delivered directly to the scrollbar.
The test case added simulates the different scenarios - nesting of
scroll areas, classic wheel events and a stream of kinetic wheel
events.
[ChangeLog][QtWidgets][QApplication] Wheel events from a device that
creates an event stream are correctly delivered to the widget that
accepts the first wheel event in the stream.
Change-Id: I5ebfc7789b5c32ebc8d881686f450fa05ec92cfe
Fixes: QTBUG-79102
Pick-to: 5.15
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
When hiding a popup by clicking outside of its area, a window is closed.
Depending on the platform specific implementation details, this can
result in multiple calls to QWidgetPrivate::setVisible(false). The first
one from the handling of the close event in QWidgetWindow::event; the
second from the destruction of the window in QWindow::event.
Since the first call already sets the Qt::WA_WState_Hidden flag before
calling QWidgetPrivate::hide_helper, we can test if the flag is set
and skip the second call if it is.
The included test does not reproduce the issue, as that issue only
reproduces if the close event is generated by the mouse event handling
in the Cocoa platform plugin (which doesn't call QWidget::close, but
rather sends a native close event to the platform window). However, it
verifies that the fix doesn't introduce any regressions.
Change-Id: Id0eda9326a8adf0cc1f6a3840f9ac0b635ab39a1
Fixes: QTBUG-79134
Pick-to: 5.15
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In the declaration, leave them in as comments so that the gaps in the
numbering of the values doesn't create confusion.
Change-Id: I92ff299416896c471e7c7d80b988cd4642b6b756
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Rather than have a fontChanged() signal which can be connected to for
tracking when the application font has changed, then it is better to
use the event that is sent to all windows and the application itself.
That way it is easy for a window/widget or item that cares about the
change to the application font to catch it in the event() function.
[ChangeLog][QtGui][QGuiApplication] Deprecated fontChanged() signal in
favor of QEvent::ApplicationFontChanged.
Change-Id: Iae8e832238fc85e385a52305bc04f16e597454b0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This follows up on commits 3e7463411e and
947883141d.
The changing of the pointer of QApplicationPrivate does not transfer
focus properly. It updates the pointer, but it doesn't deliver events
or update the widget hierarchy's focus chain. The result is that
multiple line edits might show a blinking cursor.
Instead, use QWidget::setFocus when the focus proxy has changed while
it had focus, and pass OtherFocusReason rather than NoFocusReason.
Add a basic test for QWidget::focusProxy, which exercises this code
path and verifies that pointers are consistent when focus changes as
a side effect of modifying the focusProxy.
Change-Id: I15a4d868bab2b590cfe4a1daa6a3c8cebc9c9ca2
Fixes: QTBUG-83720
Fixes: QTBUG-79707
Pick-to: 5.15
Reviewed-by: David Faure <david.faure@kdab.com>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
DeleteLaterWidget is a main application window of the test. So, its
show() function should be called explicitly before starting the main
event loop. Otherwise, it remains hidden for the whole time, which
causes an incorrect emission of QApplication::lastWindowClosed signal
when a dialog window is closed in the middle of the test.
Also, fix synchronization between deferred deletion and timer event.
Change-Id: Id3ce5adbcd9e5e22508825c52025eeea70202354
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Quit the event loop once the object is destroyed.
Change-Id: I6df1cfe867daacb6af56eb84646be91d98a2f545
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test can trigger timeouts in COIN, split into subtests.
Change-Id: I1fa5d52422275f89b2858d90c5979632aa7058e2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Duplicating the number of classes is a high price to pay to be able to
have some QAction functionality behave differently, or be only available
in widgets applications.
Instead, declare the entire API in QtGui in QAction* classes, and
delegate the implementation of QtWidgets specific functionality to
the private. The creation of the private is then delegated to the
Q(Gui)ApplicationPrivate instance through a virtual factory function.
Change some public APIs that are primarily useful for specialized tools
such as Designer to operate on QObject* rather than QWidget*. APIs that
depend on QtWidgets types have been turned into inline template
functions, so that they are instantiated only at the caller side, where
we can expect the respective types to be fully defined. This way, we
only need to forward declare a few classes in the header, and don't
need to generate any additional code for e.g. language bindings.
Change-Id: Id0b27f9187652ec531a2e8b1b9837e82dc81625c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When _NET_WM_STATE_HIDDEN is not contains in the _NET_WM_STATE
window property, the window should not be considered to be minimized
According to
https://specifications.freedesktop.org/wm-spec/1.3/ar01s05.html
_NET_WM_STATE_HIDDEN should be set by the Window Manager to indicate
that a window would not be visible on the screen if its desktop/viewport
were active and its coordinates were within the screen bounds. The
canonical example is that minimized windows should be in the
_NET_WM_STATE_HIDDEN state. Pagers and similar applications should use
_NET_WM_STATE_HIDDEN instead of WM_STATE to decide whether to display a
window in miniature representations of the windows on a desktop.
For mutter/GNOME Shell, without _NET_WM_STATE_HIDDEN, window manager
will not reply XCB_ICCCM_WM_STATE_ICONIC settings in WM_CHANGE_STATE
client message.
Task-number: QTBUG-76147
Task-number: QTBUG-76354
Task-number: QTBUG-68864
Done-With: Liang Qi <liang.qi@qt.io>
Change-Id: Ic9d26d963979b7f0ef4d1cf322c54ef8c40fa004
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Widgets have a default palette and font that is influenced by several
factors: theme, style, QApplication-wide overrides, and the parent's.
If an application sets a font or palette on a parent, then widgets
inherit those settings, no matter when they are added to the parent.
The bug is that this is not true for widgets that have an application-
wide override defined by the platform theme. For those, we need to merge
parent palette and font attributes with the theme, and this is currently
not done correctly, as the respective masks are not merged and inherited.
This change fixes this for fonts and palettes. Children are inheriting
their parent's inheritance masks, combined with the mask for the
attributes set explicitly on the parent. This makes the font and palette
resolving code correctly adopt those attributes that are set explicily,
while leaving everything else as per the theme override.
The test verifies that this works for children and grand children added
to a widget that has a palette or font set, both when themed and
unthemed. Children with own entries don't inherit from parent.
The QFont::resetFont test had to be changed, as it was testing the
wrong behavior. If the child would be added to the parent before the
font property was set, then the test would have failed. Since this
change makes sure that children inherit fonts in the same way, no
matter on when they are added to their parent, the test is now
modified to cover both cases, and ensures that they return identical
results.
[ChangeLog][QtWidgets][QWidget] Fonts and palette settings are inherited
by children from their parents even if the children have application-
wide platform theme overrides.
Change-Id: I179a652b735e85bba3fafc30098d08d61684f488
Fixes: QTBUG-82125
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
If a widget backed by a QWindow is moved we need to translate the window
geometry into a position relative to the parent widget. In most cases this
was incidentally working due to widgets backed by QWindows always having
QWindow parents too, so the QWindow position was applicable to the widget
as well. But when Qt::WA_DontCreateNativeAncestors is used this is no
longer the case, and we would end up with a widget geometry that included
the parent positions all the way up to the next native widget.
The updatePos() function has been squashed into handleMoveEvent(), since
we need to ensure the position in the move event sent to the widget is
correct as well.
Change-Id: I55894ad7ab42a6d4d65e446a332ecdd7dcdcc263
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
By sending it to all top level windows it will make it possible for
non widget based controls to listen for this event if it cares about it
so it can handle translation updates as appropriate.
Task-number: QTBUG-78141
Task-number: QTBUG-82020
Change-Id: I8f35cdcccd81a199ff780c3f4f3d2c663480d638
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
This test fails sporadically on OpenSUSE, with the widget receiving
multiple resize events. Assuming that window management kicks in at
unpredictable moments and changes the geometry of the managed widget
possibly in several steps, we try to turn off all window management
on X11.
Change-Id: I7d2120c02eb870040b2ee94986a2ac5608d5a423
Fixes: QTBUG-66345
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
When QWidget is being destroyed, its winId is cleared, and
a QEvent::WinIdChange is sent. If a listener of this event
reacted by calling winId() again, we might crash.
A crash can be observed when this child widget is destroyed in dtor of its parent.
E.g. here is a hierarchy of widgets:
1:QWidget
2:QObject
3:QWidget
4:QWidget
If a listener subscribed for WinIdChange events from (4),
and there is a connection to destroy (4) when (2) is destroyed.
This will lead to infinite loop:
1. QWidget::~QWidget
2. QWidget::destroy
3. QWidgetPrivate::setWinId(0)
4. QCoreApplication::sendEvent(q, QEvent::WinIdChange);
5. eventFilter
6. QWidget::winId
7. QWidgetPrivate::createWinId (this=0x555555957600) at kernel/qwidget.cpp:2380
8. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
9. QWidget::create (this=0x5555558f2010, window=0, initializeWindow=true, destroyOldWindow=true) at kernel/qwidget.cpp:1163
10. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
11. QWidget::create (this=0x5555558f2010, window=0, initializeWindow=true, destroyOldWindow=true) at kernel/qwidget.cpp:1163
12. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
Fixes: QTBUG-81849
Change-Id: Ib4c33ac97d9a79c701431ae107bddfb22720ba0d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When the tested widget has a focus proxy, then we should check if the
current focus widget is not the same as that focus proxy before setting
it to be the widget that gets focus. This ensures that when back-tabbing
from a widget like QDoubleSpinBox that it will not get stuck inside that
widget and will back-tab to the next correct one.
Fixes: QTBUG-81097
Change-Id: I3f689c7715da7f3ce8c3d2f616041528f5778a2f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We don't know which versions these blacklistings actually apply on
unless we actually get macOS 10.14 and 10.15 into the CI and running
tests, so let's start with that, and then granularize the blacklists
after that.
Task-number: QTBUG-75786
Change-Id: Id79642afa50cb20efa2cd209286b6933918d3a4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The test expects a very explicit list of events during show, but on
macOS we also get an InputMethodQuery event as a result of the window
becoming active. The test needs to be written significantly to support
these kind of platform differences.
Change-Id: I395c1e9e4e9baf7d9f88f0d067586fc15afb9a16
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For some reason the firstChild gets the focus when clearing the focus.
This seems to be timing dependent, as removing the 30ms qWait 'fixes'
the issue. So does a processEvent call before minimzing. Both of these
require further investigation.
Change-Id: I62833a5541712f97dc24bc63384fa4c051096537
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The platform window may create or destroy its surface from other entry
points than the QWidget API, in which case QWidget needs to sync up
its own state to match. In particular WA_WState_Created and the winId
needs to be recomputed.
Fixes: QTBUG-69289
Fixes: QTBUG-77350
Change-Id: I769e58ead3c2efcf8c451c363108848feade9388
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
When the geometry of a hidden widget was set with setGeometry(),
WA_PendingMoveEvent and WA_PendingResizeEvent were set unconditionally
even if the crect already had the correct value. This lead to
unneeded Move/Resize events within sendPendingMoveAndResizeEvents().
Fixes: QTBUG-75475
Fixes: QTBUG-79906
Change-Id: Ibbe03882f039948b6b7c04887420741ed2e9c0f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Replace QWidget::repaint() with update() + wait until the paint event is
received.
Task-number: QTBUG-80237
Change-Id: I57da7cd8fa119344484b849a88729bca7b48616c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Provide pointer to member function overloads for the QShortcut ctor. The
ctor with two functors but no contexts is not provided since it creates
ambiguousness.
[ChangeLog][QtWidgets][QShortcut] QShortcut ctor has now pmf overloads
Fixes: QTBUG-77816
Change-Id: Ic9a759cde5150dbb94c2fd351b88ee8e447e0852
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use QT_REQUIRE_CONFIG in the headers of classes to be disabled.
Add headers/source files in the .pro file depending on the configure
feature in libraries and tests.
Add the necessary exclusions and use QT_CONFIG.
Only the widgets/kernel tests were made to compile since also
the buttons depend on the action feature and it would become too
involved.
Task-number: QTBUG-69478
Change-Id: Id5bf88bc108f2bbb14dce8625bfdcb7eb0deb8e3
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Simply moving QAction to QtGui was not deemed possible since
it operates on a set of controls of some kind. The approach to
extract a base class was taken instead, named QGuiAction
following the QGuiApplication scheme. QAction remains in
widgets, but changes base class.
For QActionGroup, the functions addAction(text/icon), which
create an action, cannot be implemented in QtGui, hence a base
class is needed, too (unless they are deprecated and removed).
- Extract base classes providing functionality not based on
QtWidgets, using virtuals in QGuiActionPrivate to provide
customization points
- Change QActionEvent to take QGuiAction, removing
the need to forward declare QAction in QtGui
[ChangeLog][QtGui] Added QGuiAction(Group) and made the equivalent
existing classes in Qt Widgets derive from them. This provides
basic functionality for implementing actions in QML.
Task-number: QTBUG-69478
Change-Id: Ic490a5e3470939ee8af612d46ff41d4c8c91fbdf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
