the field was "over-expanded", which led to always querying the
non-existing source with an empty name. this broke the handcrafted
openssl library export which uses the feature.
amends c0cc50520.
Task-number: QTBUG-55530
Change-Id: Id019fcb3e7adcecaf47d7a65820179da1617c0f7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This scheme is needed to define Bluetooth (LE) capabilities on Windows
Phone 8.1. Setting these capabilities is a bit more involved than what
we currently support from qmake (see
https://msdn.microsoft.com/library/windows/apps/dn263090.aspx) but this
way we at least prepare the template for these steps.
On Windows 10 the bluetooth capabilities are set automatically similar
to the way it happens for other modules.
Change-Id: Ib3aa88802c3b421c9c3d02ec4db647cde2191f16
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Previously, manifest files always got processed to perform, e.g., variable
expansion.
This change introduces the 'verbatim' flag for WINRT_MANIFEST.CONFIG to
disable those steps and perform a simple copy of the source manifest.
Task-number: QTBUG-43468
Change-Id: Ie7d4d27376efb3bcf5bc38163496f0a1f1319742
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Split them and add -I flags to INCLUDEPATH and -D flags to
DEFINES. Anything else gets reported as a problem and dropped.
This has the benefit that qmake will automatically use -isystem for
those paths if they lie in a system directory. As a consequence of that,
we won't get any warnings in headers located there. There are multiple
cases of glib, gtk, etc. headers producing warnings (such as enums
ending in comma). This does not fix warnings produced by use of macros
declared in system headers, though...
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I4b844cb518dbae5ea499811221f9015af985110a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is now centralized in configure.pri except where it explicitly
needs to be overridden.
Change-Id: If829d6b5eecf9a5fc403d0a0600d12c9e5781525
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
convert the ugly config.tests/[...]/freetype.pri file into a custom
callback in configure.pri, and reinstate pkg-config use for freetype.
subsequently, use QMAKE_USE for the actual library references.
this fixes in particular cross-builds, as the new configure was not
passing the necessary information to the test any more, so the old .pri
file misbehaved.
Task-number: QTBUG-54911
Change-Id: I5fc9c254334a2675f7db4d54df4c77637e8e2487
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
it's now possible to declare references which don't cause linking (or
cause only linking).
make use of this in the xcb-static library.
Change-Id: Ic429e0a1200b3a333738ea8d8e576ff64b6cac21
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this makes it possible for features added via CONFIG to use QMAKE_USE*,
as default_post.prf is processed before all features in CONFIG.
Change-Id: Id0812a0fb1aa5e658548bd2bc6003234085545e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The "args" variable would contain the original -spec XXX flags in
addition to the -spec macx-xcode passed in the system command invocation
below. The last use of -spec takes effect, so this code was entirely
ineffective. Consequently, uikit/default_post.prf in the nested qmake
call thought it's still the top-level call and thus added xcodebuild
again, which caused an infinite recursion.
Change-Id: Ie98d8a7f3c1cd875f4a4146af9a66a66b48cc6cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this is, in fact, not the same as --proxies=system, and the old
configure handles this by putting special cases before the catch-all
patterns. we achieve this by trying the verbatim names (of all options,
which is admittedly a tad inefficient) before applying the -qt/-system
transformation.
Change-Id: Ic85a9d76d6e8ca95b2e1b5566f047f4b7ac38b98
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- generic --* options are defined to be booleans, without the
possibility of having an additional parameter
- -qt and -system options don't exist in the --* form
- --foo=bar options exist only in the --* form
Task-number: QTBUG-55610
Change-Id: Ib0480ac6f479df48045c9de8e854a525862ee363
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
every repo's .qmake.conf is expected to do it already.
Change-Id: I87ed75d80493d8f1c4548c5b9dadfdaf07b86d7e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this is a relic from the early times of the modularization.
Change-Id: I9ca46fa6457bf9ca207b6be1f0637f0349569ddf
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The order in which exclusive builds are added affects the order of
values in SUBTARGETS. xcodebuild.mk parses the value of SUBTARGETS in
the Makefile and selects the first entry, which would always be
release-iphonesimulator regardless of the build type. This obviously
caused -sdk iphoneos builds to fail.
This patch switches the order of in which exclusive builds are added so
that the entries which are not present in a particular build type are
always added last.
Change-Id: I306d6f7430c1dff3d741a8c5182b7af81d000e7f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
26d44fce3d added support for passing the
configure options to qmake following a "--" argument. This interacted
badly with xcodebuild.prf as the "args" variable would contain the
standard qmake arguments AND the extra arguments following "--"... which
were placed prior to -spec macx-xcode and the path of the .pro file,
causing them to be ignored and thus qmake to print its usage when
attempting to generate Xcode projects for Qt apps on UIKit platforms.
Amends 6a9f38a11d, which fixed the same
issue inside qmake itself.
Change-Id: I3056bd811c2ce958952fec8e05ddef7a063c0646
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This essentially emulates Xcode behavior for QMAKE_BUNDLE_DATA.
This is mostly for our own internal use. No documentation is provided.
Variables introduced:
- QMAKE_ASSET_CATALOGS
- QMAKE_ASSET_CATALOGS_APP_ICON
- QMAKE_ASSET_CATALOGS_BUILD_PATH
- QMAKE_ASSET_CATALOGS_INSTALL_PATH
Change-Id: I9577415d637f022d05f301c5a0d799483cd2a963
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this makes build dirs consistent with install dirs, which fixes
launching tests, examples, and build tools in some configs.
unfortunately, this makes prefix builds slower and their build dirs
bigger due to the DLLDESTDIR implementation being stupid (QTBUG-11435),
but i'm not inclined to fix that now. it isn't actually worse than for
non-prefix builds, so whatever.
Task-number: QTBUG-54438
Change-Id: Idbd034620e95cb23f7699d243678c4e9fa6353ac
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This makes use of the new -quiet option in xcodebuild 8 to reduce the
noisiness of output when make is invokved in silent mode.
Change-Id: I3730dddcc1d9dae329b5ff254448533cdd573a30
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
5971b88e is not needed in new configure.
This merge also reverts "fix QMAKE_DEFAULT_*DIRS resolution with
apple SDK", 2c9d15d7, because it breaks iOS build with new
configure system.
Conflicts:
mkspecs/features/default_pre.prf
mkspecs/features/mac/toolchain.prf
mkspecs/features/toolchain.prf
src/dbus/qdbusconnection.cpp
src/plugins/sqldrivers/mysql/qsql_mysql.cpp
src/sql/drivers/mysql/qsql_mysql.cpp
src/widgets/widgets/qmenubar.cpp
src/widgets/widgets/qmenubar_p.h
tools/configure/configureapp.cpp
tools/configure/environment.cpp
tools/configure/environment.h
Change-Id: I995533dd334211ebd25912db05b639d6f908aaec
This macro expands into a static_assert and can be used to
trigger a compile error if a certain feature is not available
when trying to compile some code.
This is especially useful to protect against accidental inclusion
of headers that implement functionality related to a feature.
Change-Id: I456c55b989ce5f35f3af0e13c1886a85c23dfe29
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the code got factored out to an own toolchain.prf file, which is
load()ed from default_pre.prf, so no change at first.
however, on mac, we shadow toolchain.prf, and make it load() sdk.prf
first.
a side effect of this is that project files may not override
QMAKE_MAC_SDK any more, which seems to be no big loss. it is still
possible to override the sdk on the configure command line (but note
that this only ever worked for the target sdk).
it has also become harder to disable the use of an sdk altogether:
putting CONFIG-=sdk into a project file or the qmake command line has no
effect now. instead, it's possible to put it into .qmake.{conf,cache}.
to make it simpler again, it's conceivable to finally add qmake -pre,
which would allow setting variables before default_pre.prf is executed.
Change-Id: I149e0540c00745fe8119fffd146283bb214f22ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... to the new qmake based configuration system.
This removes the old qfeatures.txt (distributed over configure.json
files) and qfeatures.h (distributed over qconfig-<module>.h files).
qfeatures.prf is gone without replacement, as attempts to use it would
lead to followup errors anyway.
Change-Id: I1598de19db937082283a905b9592d3849d2199d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
"description" suggests something slightly longer.
this may seem like a gratuitous change, but the upcoming replacement of
the old feature system clarifies makes it seem much less so.
Change-Id: Ibe702e01cb146b59127bf1f990b4acaef1c61d55
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This change implements the required infrastructure to modularize the new
configuration system.
This requires a hierarchy of configuration files, both for handling
multiple repositories and for individual modules inside the same
repository.
When configuring, they all need to get loaded first, as command line
processing needs to know about all possible command line options.
When the command line has been processed, the individual configuration
files need to get processed one after the other and independently from
each other.
Configure is now automatically invoked when building the a project
tree's "root" project; this works with both modular and top-level builds
of Qt (the latter with an according change in the super repo). As an
immediate consequence, the -skip option moves to the super repo with a
different implementation, as configuration is now done after the repo
list is determined. The option belongs there anyway.
This commit also adds an optional testDir entry to the json file. Like
this, we can still have all configure tests in qtbase/config.tests and
the configuration file in, e.g., corelib can reference those.
The files section can now be left out as long as a 'module' entry is
present, specifying the module name. The names of the files to generate
can then be deduced from that name. We still need to be able to specify
names directly for the global configuration files.
qtConfig() now also queries features which are module-specific. As it is
sometimes necessary to query the configuration of modules which should
not be actually linked (and cannot in the case of subdirs projects), the
new variable QT_FOR_CONFIG which allows specifying configuration-only
dependencies is introduced.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Id1b518a3aa34044748b87fb8fac14d79653f6b18
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Ignore everything that after the initial period separated numbers.
Change-Id: I376b154ff0ab6e3877223ec1383ed4708ecd2164
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
For platforms which require packaging the testdata into the application
resources, the BLACKLIST file needs to be added. Otherwise it will not
be found during runtime.
Change-Id: I2d5c3b3040b3b268bc73254459b8b902b7fae4e2
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This reduces unnecessary OS conditions in qmake since these platforms
are mutually exclusive, and also opens up their potential for use on
future devices (like carOS(?), which is device idiom '5').
This is also more similar to what Xcode does, as the
TARGETED_DEVICE_FAMILY variable is not platform specific.
Change-Id: I29d209cd8e0779f492bda829008264773e13c75c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This reduces unnecessary OS conditions in qmake since these platforms
are mutually exclusive, and also opens up their potential for use on
macOS to transparently support multi-arch builds like UIKit platforms.
This is also more similar to what Xcode does, as the DEPLOYMENT_TARGET
variables are platform specific, while the ARCHS variable is not.
DEPLOYMENT_TARGET has a use case for being OS specific in qmake (host
tools vs targets), while ARCHS does not.
Change-Id: Icee838a39e84259c2089faff08cc11d5f849758d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch moves towards a more sensible layout for UIKit platforms,
where both the device and simulator architectures for binaries are
combined into a single Mach-O file instead of separating out the
simulator architecutures into separate _simulator.a files.
This approach is both more common in the iOS ecosystem at large and
significantly simplifies the implementation details for Qt, especially
with the upcoming support for shared libraries on UIKit platforms.
This patch takes advantage of the -Xarch compiler option to pass the
appropriate -isysroot, -syslibroot, and -m*-version-min compiler and
linker flags to the clang frontend, operating in exactly the same way
as a normal multi-arch build for device or simulator did previously.
Exclusive builds are still enabled for the xcodebuild wrapper Makefile,
which builds all four configurations of a UIKit Xcode project as before,
as expected.
A particularly advantageous benefit of this change is that it flows very
well with existing Xcode workflows, namely that:
- Slicing out unused architectures is handled completely automatically
for static builds, as an executable linking to a library with more
architectures than it itself is linked as, the unused architectures
will be ignored silently, resulting in the same behavior for users
(and the App Store won't let you submit Intel architectures either).
- Removing architectures from a fat binary using lipo does NOT
invalidate the code signature of that file or its container if it is a
bundle. This allows shared library and framework builds of Qt to work
mostly automatically as well, since an Xcode shell script build phase
can remove unused architectures from the embedded frameworks when that
is implemented, and if Qt ever starts signing its SDK releases, it
won't interfere with that either (though binaries are just resigned).
Change-Id: I6c3578c78f75845a2fcc85f3a5b728ec997dbe90
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is done because a followup patch will cause simulator_and_device builds
to no longer use exclusive builds and so this feature could not work,
but it is not strictly necessary anyways because users do not need to be
able to do this.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: If869fbfea776751553c352c2d652edf745a3638d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The actual blocker for precompiled headers is not the iOS/tvOS/watchOS
platforms, but the way qmake handled multiple-architecture builds on
Apple platforms.
This patch allows multi-arch builds to be performed while using
precompiled headers.
Since df91ef3d6c55692a0236f67b6c6b134a3bf84098 (April 2009), Clang has
had support for PCH files in the driver, which allows to use the
-include flag to automatically translate to -include-pch. We can then
take advantage of the fact that the -include option is allowed to not
be separate from its argument, which lets us take advantage of -Xarch to
specify a per-architecture precompiled header file.
This is done through some magic in the qmake Makefile generator which
"multiplexes" the PCH creation rule across multiple architectures and
replaces a series of tokens with the proper precompiled header paths
and architecture flags at usage point.
Change-Id: I76c8dc9cda7e218869c2919f023d9b04f311c6fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
