Added configure test, whether lgmon (liquid graphics performance monitor)
is available. The test is supposed to be positive only for internal
BlackBerry NDKs currently.
Added calls to initialize lgmon and to indicate when an app is ready for
user input.
Change-Id: I5cbc29fb38a86585dcebd14d462436deaa1998aa
Reviewed-by: Wolfgang Bremer <wbremer@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
for in-source builds, we end up attempting to install the modules-inst
dir in case we re-run qmake after some modules have been built.
Change-Id: I50d4d394bfd6f48b9a5f5faa584919710a03dea9
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
... so it will be found when included. That file was added with
commit 3b6b615334,
"export QT_NO_<foo> equivalents to the build system"
Change-Id: I38208aafe5b274d5976cec5d5149a41e6a963798
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change-Id: I1873c1e7c59af02b06566d0e47c020c609d49c9f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this makes it possible to properly exclude entire subprojects based on the
availability of features, rather than stuffing every single source file
with #ifdefs.
the defines are aggregated from the -qconfig <profile>,
-no-feature-<foo> and some other configure flags.
usage:
load(qfeatures)
!contains(QT_DISABLED_FEATURES, textarea): SUBDIRS += textstuff
Task-number: QTBUG-28102
Change-Id: I83400632d64312fa4b907e1318dddfe27c432387
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
the file is not meant to be human-readable and even less editable, so
there is no point in having comments in it.
also, it was completely inconsistent to start with: features without
dependencies were listed as "templates" in form of commented out
#defines to disable them manually, while features with dependencies
had a respective #ifdef block to be automatically disabled, but no
"template" to disable them manually. now only the #ifdef blocks remain.
the actual configuration is done by configure via qconfig.h.
Change-Id: I8b9e56ba570908dad4cc6dfcd24bf0e1da8b290f
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
much more elegant than the checked in file. and less chance to get it
wrong, as people often enough do.
Change-Id: I975a62dfd83ce4f15947ce54f3c40931b1badae0
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as of qttools/18a5e89623815f5355b4173a2e93609eb10289d1
Change-Id: I75cb55e0c404449a4e0d963e09185287a3f6343e
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
the precise syntax depends on what exactly the command is used for, so
we need to resolve it at the last moment. see followup commits.
This logically reverts commits 6f4ff81380
and 731e6bece5.
Change-Id: If285c91d7521069be86d32593b5c2ae2027b3038
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead, teach qmake to use the mkspecs dir from the source dir as well.
Change-Id: I9edac11f8997fcb0594d0a67419d4733dd4ed86b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the fallback is to look in the install dir (which is the build dir when
no -prefix is used), which doesn't work for a script in the source dir.
amends 6b38524b
Task-number: QTBUG-31131
Change-Id: If615ab4e3a2839b6b5be9bf6ef79d3f894b1748d
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
instead, rename it to syncqt.pl and rely on qtPrepareTool()'s new
ability to correctly invoke it as a perl script even under windows.
the wrappers themselves have been trivial at this point, so there is no
added value in keeping them, either.
Change-Id: I77cf65edbcfaa48ed1900defe940d4eb4b82d5b9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
so that *really* all non-installed tools are properly registered.
if some day we have more build scripts, this code should be centralized
in a .prf file.
Change-Id: I5b292a4b30199cb59838319f2dc9f88cd54bb57d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
instead of symlinking (on unix) or creating a forwarding spec (on
windows), just put the default specs into (the bootstrapped)
QLibraryInfo.
Change-Id: I595500ef7399f77cb8ec117c4303bc0a2ffe505f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qdocconf files can now reference $QT_INSTALL_DOCS to pick up e.g. global
includes, instead of using relative paths. Qt modules will automatically
get a doc target that builds and installs into the right place (including
supporting shadow-builds) if they set QMAKE_DOCS before loading(qt_module).
Change-Id: Ia408385199e56e3ead0afa45645a059d1a8b0d48
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Change-Id: Id0137400f18c8dfe7be7ca44670c16615401d424
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
When cross-compiling from a Windows host, we need to install the right (win32)
versions of syncqt and qmake into the target folder.
Change-Id: I35fc4b05bb6ad7605bc932cae527372a9fe0ba3e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
now that all modules have migrated, dispose of the clutter.
Change-Id: Ib8937c1452536f645b76c0097b927df1108afc1a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
- Use the syncqt from the source dir, not build dir.
- Copy both syncqt and syncqt.bat on win32.
Change-Id: Ic07805d03124386fb112c154e22363a06ae1c8ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
cp is perfectly capable of properly copying the symlinks
Change-Id: Ia45a4521af2ffb70af4e111480c0d6b7999c96c1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without this, a simple "configure && make" will not build the examples
or tests, even if the "-make tests -make examples" options were used.
This is a partial revert of 709cc8800e.
Change-Id: If363cd24d30ba4c102a35ed2617999ae4e9ed9b0
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
they were included instead of being proper subdirs. this doesn't appear
to be necessary for anything at this point.
Change-Id: Ie57285df8e5ea7bd8883bcd42fa6ed62b8e1d54d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we now simply call qmake -r, which is also what we do under windows.
-fast mode is retained for examples and tests, though with moderately
modified semantics (i couldn't be bothered to decipher what the old ones
were supposed to be).
Change-Id: Id2c2d2bed9c8d52ac42f31b388bffc34f4649650
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
when qmake runs into the new option(host_build) command, it will restart
the project evaluation with a host spec.
the new default host spec is called default-host (gasp!). it is
overridden with the pre-exising -spec / -platform option, while the new
-xspec / -xplatform option overrides the pre-existing default spec.
specifying -spec but not -xspec will set the xspec, too, so the behavior
is backwards-compatible. same for the XQMAKESPEC override read from
.qmake.cache and the environment variable.
the cleaner solution would be adding -hostspec, to be symmetrical with
the override semantics, but that would deviate from configure in turn.
Change-Id: I4297c873780af16ab7928421b434ce0f1d3820da
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
There is no session management currently implemented for the xcb QPA
backend. Update the build system to reflect this.
Change-Id: I3486de5741f1fb7e09330ca142b8235a84d3b91d
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For some reference platforms and SDKs we will need to pass in
extra paths. Currently users have to modify the mkspec to adjust
paths or set environment variables that will be picked up.
This change introduces the -device <name> and -device-option
<key=value> option. The key value pairs will be written to a
qdevice.pri and can be used by the qmake.conf of the device spec.
The reason to not save the key value pairs in qconfig.pri is
becase of the fact that the device spec loads the qdevice.pri
earlier than the qconfig.pri. qdevice.pri allows the mkspec
to set the compiler flags and qconfig.pri allows configure to
add to those compiler flags.
Done-with: Holger Freyther
Change-Id: I931a197b8be72397e1eedfee09502eefc01c9d4f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
17ddce4692 removed the endian test.
90a5492fb0 removed the ipv6 test.
largefile and nix are long dead.
Change-Id: If8e5d4f0546e30778b82ee99f662cb9ed3aefacb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.
the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.
-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.
adapted the qmake feature files and the qtbase build system accordingly.
Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This makes these files easily locatable when using Qt Creator.
Change-Id: Ie0c15ebf2cc7045954713265bf524f2ecf1eea34
Reviewed-by: Alan Alpert <alan.alpert@nokia.com>
The MNG file format is generally abandoned, and libmng has been
unmaintained for several years.
The MNG plugin and bundled libmng has been moved to the
qtimageformats project on Gerrit.
Task-number: QTBUG-21869
Change-Id: I946432347014ffde2b72307a5f8b166ca5553602
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
From the commit message of 0b2ce85200 and
the code in qt_module.prf, it is apparently intended that qmodule.pri is
installed, but this was never implemented correctly. Make sure we
install it.
This has gone unnoticed because it happens to be installed by accident
unless $$QT_SOURCE_TREE != $$QT_BUILD_TREE and
$$QT_BUILD_TREE != $$[QT_INSTALL_PREFIX] (i.e. a shadow build which is
not using -developer-build).
Change-Id: Iee861a7bb592ca43a61ad91f1ef6a7a5bd21aff8
Reviewed-by: Jyri Tahtela <jyri.tahtela@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
And try to fail a bit more gracefully if it isn't.
Change-Id: I62e01c0536aa0a032940d6a9a5ccf5edcfeef221
Reviewed-on: http://codereview.qt.nokia.com/2109
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
Remove the references to demos from configure and qtbase.pro.
This is done because of the merge of the demos and examples in Qt.
Everything will be added as an example.
Change-Id: Iec040f5c719384c7aabba971316de40195ed3a69
Reviewed-on: http://codereview.qt.nokia.com/619
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Prior to this change, running configure with the `-make' option would
affect the order in which parts of Qt are built. This is unintuitive
and would easily cause build failures. For example, configuring with
`./configure -make demos' would attempt to build demos before building
libs, which, of course, would fail.
Refactor the code so that the result is the same regardless of the order
of `-make' options.
Change-Id: Idfa61834a0f01d0628a9a1ae27ece94ae3647e6d
Reviewed-on: http://codereview.qt.nokia.com/128
Reviewed-by: Lincoln Ramsay <lincoln.ramsay@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Tests are now treated like examples and demos: compiled by default,
unless you configured with `-nomake tests'. (They are still not
installed by default, however.)
Reviewed-by: Jason McDonald
Change-Id: Ifc56f6763bb2aafe6fe57b684751f99ec82ea26f
