At least one OS (QNX) can't dlopen() a library that is still
open for writing elsewhere
Pick-to: 6.2 6.3
Fixes: QTBUG-101020
Change-Id: I84ca709a65fc824ec4b3e3f1ea03704bf1cc0414
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Android we had 10 failing unit-tests in tst_qaccessibility
One of them was failing because on Android QMdiSubWindow is created
maximized by default, so we need to explicitly call showNormal() on
it before doing all the checks.
Other 9 were failing because we didn't get A11Y events when expected.
This is a bit more tricky.
On Android a11y state is not explicitly set by calling
QPlatformAccessibility::setActive(), there is another flag that is
controller from the Java side. It is set to 'true' only when some
of the a11y services are enabled on the device. The state of this
flag is queried during event processing, so a11y state can be reset
to false while we do QTest::qWait().
This logic is absolutely correct for real applications, but it is
a problem for the test case, because we can't easily enable a11y
services in the CI.
To overcome the issue in unit-tests, re-enable a11y before each test.
A more precise fix will require re-enabling it after every qWait() or
processEvents() call, but the current tests pass with such condition.
Fixes: QTBUG-87674
Pick-to: 6.3 6.2
Change-Id: I6f765bc6d3aaeaa19aba3a64473ea25e9cbdb0f8
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The content of the window was intended to trigger wrapping.
On Android, the window is larger, so more content is
necessary. This patch adds more content.
Fixes: QTBUG-87401
Pick-to: 6.2 6.3
Change-Id: I33a2fe4560c358f2b0b83523ee4ab26bb5dd2513
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The stored layout direction used to get changed during initialization
to what was auto-detected based on the translation. Changing the
translation then overwrote that stored value, even if an explicit call
to setLayoutDirection was made by the application.
Calling QGuiApplication::setLayoutDirection(Auto) has so far been a
no-op.
Change this logic so that the stored layout direction continues to be
LayoutDirectionAuto also if it's set based on auto-detection, and only
overwrite it when explicitly called with a non-Auto value. This way,
applications can set a layout direction that stays unchanged even when
translators are installed.
Add test coverage that uses a QTranslator.
In practice, this is not a change of behavior, unless applications called
setLayoutDirection(Auto) (which is no longer a no-op), or called
setLayoutDirection() and then installed a translator and expected the
translator's layout direction to come into effect in spite of the explicit
setting.
[ChangeLog][Gui][QGuiApplication] Calling setLayoutDirection with a non-
auto value now disables the auto-detection based on installed
translators. Applications that explicitly set a layout direction and also
want translators installed afterwards to take effect should reset the
layout direction to Auto, which is now no longer a no-op.
Fixes: QTBUG-100632
Pick-to: 6.3
Change-Id: I1fdcebd43a9b1b468ff95bf15f53f441bb214e08
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This format will be changed by the next commit. Also it is an
implimentation detail that can be changed at any time.
Task-number: QTBUG-95889
Change-Id: I00b1133078f1035e03e2cd6fae28192de54d2154
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Hiding a row in a form layout is inconvenient to do as access to the
widgets in each row is cumbersome. In addition, a row might include a
layout for the label or the field column, and we can't hide layouts and
instead need to navigate to the widgets inside the layout. And even if
an application developer does all that, the spacing calculation doesn't
ignore hidden rows.
Add setRowVisible and isRowVisible APIs with the usual overloads.
Implement the logic to traverse a layout item to its contained widgets,
so that they are explicitly hidden when a row is hidden, and skip hidden
rows in the spacing calculation.
[ChangeLog][Widgets][QFormLayout] New APIs setRowVisible and isRowVisible
to hide and show rows in a form layout.
Fixes: QTBUG-6864
Change-Id: I6af98409802f331c4523e91d7dac8a97762c579d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The test is not only flaky on Windows 10 but also on Windows 11.
Pick-to: 6.2 6.3
Task-number: QTBUG-100412
Change-Id: I27e8179dafd4743c3eaf2c0dd8b70b804612c7c2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
tst_qtextdocument was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Pick-to: 6.2 6.3
Change-Id: Ie1bd75c21e481c2ecb8607c04ce9370fc6d7b00e
Reviewed-by: Samuel Mira <samuel.mira@qt.io>
Reviewed-by: Pekka Gehör <pekka.gehor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qgraphicsview was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Task-number: QTBUG-87397
Pick-to: 6.2 6.3
Change-Id: Ib604274d098c271e22b010e6cb822fdf9553df1c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Samuel Mira <samuel.mira@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
There was a test for Qt4 compatibility in tst_qheaderview.
We don't run it since Qt 6.
This patch removes the unused code.
Change-Id: I751829ac5a142e79379e81e9e739107544cf7406
Reviewed-by: Arnaud Bienner <arnaud.bienner@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Currently test relies solely for external test server. This makes it
not possible to run test successfully with environment where docker is
used.
Pick-to: 6.2 6.3
Change-Id: Ie2974a0e2fec9b16d9d023730b76fa2a32f77e65
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As QNX claims to support abstract Unix-domain sockets, its getsockname
always returns for socket that has not been bound to local name
address_len of sun_path as maximum length (106) even when it does not
contain valid address.
https://www.qnx.com/developers/docs/7.1/index.html#com.qnx.doc.neutrino.lib_ref/topic/u/unix_proto.html
Pick-to: 6.2 6.3
Change-Id: I0f0f5c05611c8db6af35377dde16450f58c83c56
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Just as a minor debugging helper: when warning that an invalid
regular expression object is being used to match, also print
the used regular expression pattern.
Change-Id: I0f99bcf4ca87ec67d04ed91d9dc315814f56d392
Fixes: QTBUG-76670
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The view.resize() command has no effect if the requested
size is smaller than the screen. So the view has space for
the whole model. It then won't scroll, so scrolling cannot
be tested.
This patch enlarges the model so that scrolling is always
necessary and thus possible.
Task-number: QTBUG-87407
Pick-to: 6.2 6.3
Change-Id: Ibff512158d9c16be120a69c7328b6d0ae2c3b551
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Some tests were blacklisted, but the problems cannot be reproduced
any more. This patch activates them.
Fixes: QTBUG-87404
Pick-to: 6.2 6.3
Change-Id: I5944c750a5717daaf43a22d6d1fa51ae54fc3da2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qopenglwidget was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Pick-to: 6.2 6.3
Change-Id: I7ea55f262f362c098b52e1b1a319b26c31a7e067
Reviewed-by: Pekka Gehör <pekka.gehor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qdom was disabled because it crashed. It does not any more.
Task-number: QTBUG-87671
Pick-to: 6.2 6.3
Change-Id: I41117938fe9d93b510c4a60beb4c2f5b20991434
Reviewed-by: Pekka Gehör <pekka.gehor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Port the test to use the QWindow* based overloads of QTest::mouseMove()
and move the cursor away.
Pick-to: 6.3
Task-number: QTBUG-98489
Change-Id: Id1ac0ef176c6f9bf179f989ddd5775877525fc0d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Makes it easier to interpret the output from the test, because of
embedded newlines.
Pick-to: 6.3
Change-Id: Ic15405335d804bdea761fffd16d4f141e09537f4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Simplifies the code. And removes the unnecessary quote around the
pattern that was there, for some reason.
Pick-to: 6.3
Change-Id: Ic15405335d804bdea761fffd16d4f135edf6993b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The redirect handling for http2 was a little simple. E.g. not handling
relative URLs.
Fix this using the redirect response parsing function which the http1
protocol handler already uses.
Fixes: QTBUG-100651
Pick-to: 6.3 6.2 5.15
Change-Id: Ic0cec4cacc92707e7a7fde1f4665f80995a6057e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test always fails when either the Xcb or UNIX, one of the Windows
event dispatchers is used. So only test for the event dispatcher name,
which then covers all platforms, including QNX and INTEGRITY (which
use the UNIX event dispatcher).
Pick-to: 6.3 6.2
Change-Id: I2e315831b53f823c5496ad0319319df78f064cc1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Bring out the asymmetry between date and time more clearly; when date
is valid, an invalid time is ignored in favor of QTime(0, 0). At the
same time, eliminate an un-needed variable from the code that
implements this special handling. (Left over from when the QTime was
passed by const ref, rather than by value.)
Change-Id: I81d8a9026cbb7887a8c638a2761b3db54c088af7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It can now use startOfDay()/endOfDay() for the end-points of its
search range; and it should check transit is not empty before
dereferencing transits.at(0).
Change-Id: Ib1568f4d8d6ce301d601071bb58185be906c631a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- ICU is not supported by backend.
System supports only a simple named UTC time zone implementation(see QUtcTimeZonePrivate)
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I4a87fc3d5484d75d55890bf88d012955e5048a0b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Relying on string manipulation leads to -Wredundant-parens warnings in
the best case, and to non-compiling code (when using typedefs) in the
worst case.
We can avoid both issues by simply generating code that uses
add_pointer, which takes care of reference types (even typedef'd ones),
and creates no warnings about parens (as we don't write any anymore).
Fixes: QTBUG-100915
Pick-to: 6.3 6.2
Change-Id: Ic5b1cbfda20d920d11f51beeb62e9479261d5f00
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Moved to after the header is actually written, not just generated.
For requests with data (put/post) we may have to wait for a callback
before the data to write is available. Since we then delay writing the
header as well it would be disingenuous to emit requestSent().
Pick-to: 6.3
Change-Id: I76c2d40ca48faaa1f6730ce8b3d5a8a4c3156f8f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Some of the UI elements in the a11y tests are allocated dynamically,
which means that if the test fails, the element is not destroyed
properly. As a result, the "hanging" UI elements affect all the
following tests, which leads to more test failures and even hangs.
This patch wraps all such allocations into smart pointers, which
guarantees correct destruction in case of test failure, so that other
tests are not affected, and also prevents memleaks.
As a drive-by:
- use nullptr instead of 0 in constructors;
- create some objects on stack instead of dynamically allocating
memory for them;
- remove some unneeded 'delete' calls for the objects that belong
to QObject-hierarchy.
Task-number: QTBUG-87674
Pick-to: 6.3 6.2
Change-Id: I0dcc26990955cd7b240a689a7438880b686985b7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
These tests rely on reading output sent to stderr, so make
sure their output does go there.
Pick-to: 6.2 6.3
Change-Id: If62c073101c1d2e3d64f8cb2769d67f3b9fbeefb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The hugeQImage test loads, as its name suggests, a huge image.
At 2.5 GiB it's too big for the hard-coded 1 GiB limit on RAM
that the QNX toolchain hard-codes when it's started in QEMU.
Pick-to: 6.2 6.3
Task-number: QTBUG-100929
Change-Id: I8e8caaff7fd1dd0e648ada5df613c793f72bcf5d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Fixing documentation and removing tests.
[ChangeLog][Important Behavior Changes] The qNextPowerOfTwo()
functions now have preconditions.
Change-Id: If6d5e8bee66826910e89be7cac388a1f0422ebfd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
More mindless coding-style conformance. Includes moving & or * to
after the space, not before, in declarations; and spaces after commas.
Change-Id: I221fef1e4de69d6c55d33dfc533aa74e2fd72df0
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
With one exception: in a macro-definition with a backslash-newline
immediately following the open-parenthesis.
Change-Id: I0fc8d7492676402636785d571e4667881334af6a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Simply if (!condition) QSKIP(...) instead of having a long block
depend on the condition with the QSKIP() in its else block (which
should have had braces, as it was).
While dedenting the code block, tidied up spacing: only include blank
lines where they break up the code into blocks that go together, don't
leave spaces just inside parentheses.
Change-Id: I0196150088be88a7c6073b997a315b8f14d5f392
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Use QVERIFY() rather than comparison to true; QVERIFY() the negation
rather comparing to false; prefer QCOMPARE() otherwise for
comparisons, except for a few special cases involving very long
strings. Fix up the phrasing of a few QSKIP()s in the process.
Also, QCOMPARE() can handle an enum as expected value without
int-casting.
Change-Id: I9a1b82e5f4e10df6427bcc184b7757737df7db4f
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
In some cases by adjusting where the splits happen within concatenated
strings.
Change-Id: I4cffc41cda4582654151ba45d1478285caee7c81
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Prefer pre-decrement over post-decrement, turn a while into a for,
Don't put a while's body on the same line.
Change-Id: I5653a9bcec7901d205a91927c4b08e3dc13e0ca6
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reflowed some over-long ones, fixed some typos, capitalise starts of
sentences (and end them with suitable punctuation). Removed one as
redundant, made another pair redundant by changing the code (use an
overt NaN instead of commenting that it's happening). Prefer C++-style
when single-line. Don't pretend to be QDoc comments, or have other
eccentricities about start-markers.
Change-Id: I5a30e1b22a08866124f09060bb35f5bd27cd443b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Much of the test code simply had a blank line after each check. Keep
the ones that separate groups of related statements, but remove the
ones that separated members of such groups. In some cases swap a blank
line and a code line to put the code with things it relates to.
Change-Id: Ie33863080d407898b2b2f044599398980ab9793d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Split some long declarations of two variables in one line into two
separate declarations. Made more things const, made some consts
constexpr. Skip a variable entirely when it's only used once (and not
giving us some other benefit). Moved some declarations closer to their
variables' first uses.
Replace some Capitalised variable names with lower-case ones.
Change-Id: I3b8dac46530ba1c2e6100cb007b5487253304526
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It saves the conversion to UTF-16 until the formatting. Split up long
lines, purge spaces just inside parentheses, and otherwise tidy
affected lines. Don't use backslash-newline for line continuation
within string literals; juxtaposition is cleaner.
Change-Id: I9c3d3e33f5ecbdb530538679147f7bc32afbeb05
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It's terser and cleaner to read. Likewise for
QString::fromLatin1(). QCOMPARE() can take a QStringView, hence u"..."
as its expected string; other uses need u"..."_qs.
Change-Id: Iaf96569ff3ce69c890badfb6e40f702a78b100b3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Marc alleges it is more efficient.
Corrected part of a message to be more accurate in the process.
Save some casting by using suitable format specifiers.
Change-Id: Ic31a4e17b8910d35781a494ec860c7a08f08f33b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
When the format is an ASCII string, there's no point widening it to
UTF-16 before the actual formatting step. Also, don't construct the
format string using string arithmetic, when passing another parameter
to arg() will do just as well. In the process, restructured
generic_data(), split long lines and conform spacing to Qt coding
style on affected lines. Simplified initialization of two string
fragments by using QL1S instead of QString, too.
Change-Id: Ib101dcf9296cc532291518bcef8e0a8de597b8a0
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
In tst_qguiapplication and tst_qcoreapplication,
the application version should be set. On Android, this
is done using QT_ANDROID_VERSION_CODE.
Pick-to: 6.2 6.3
Change-Id: I6b473ad25092fb24df9400e0ab8fbb8ea4edbb6a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Tests are run for QNX in qemu similar to b2qt currently (using offscreen
plugin and software rendering). So the issue is same.
Pick-to: 6.2 6.3
Task-number: QTBUG-100930
Change-Id: Ie973c6c611ac48703fd7cce53925940b80858bc8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
