Currently test relies solely for external test server. This makes it
not possible to run test successfully with environment where docker is
used.
Pick-to: 6.2 6.3
Change-Id: I51f4f48a80c1be8dd24359fe24d9cbfd471d2195
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Android uses its own implementation of QNetworkProxyFactory, so the
test of a generic implementation will never be working there. The
"http_proxy" environment variable is simply ignored in Android's
implementation.
Fixes: QTBUG-87385
Pick-to: 6.3 6.2
Change-Id: I3c24e3481b70872d332310aa86c68adad9c2b7e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- Use QT_ANDROID_EXTRA_LIBS to correctly deploy libraries on Android.
- Update the test code to use application libraries directory
on Android.
This allows to enable the test for Android in CMakeLists.txt
Task-number: QTBUG-87438
Pick-to: 6.3 6.2
Change-Id: Ib74da036472320736888052b63a45ca50431de48
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
On Android we demand the libraries to always start with "lib" and
end with ".so" extension. Also Android does not support versioned
libraries.
This patch updates CMakeLists.txt to fulfill these requirements,
and also omits some unsupported test cases.
This allows to enable this test for Android in CMakeLists.txt
Task-number: QTBUG-87438
Pick-to: 6.3 6.2
Change-Id: Iec30acdefe00c471acc7139cd255b3389e31d22b
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Previously, only the first B?XFAIL would be reported, all others would
be discarded. Furthermore, if a B?XFAIL had happened, B?PASS was also
not reported, since the B?XFAIL served as test line. However, if the
B?XFAIL was followed by a SKIP, B?XPASS or B?FAIL, these were reported
as normal, producing exactly the kind of duplicated test line that the
skipping of B?PASS was meant to supply.
So change B?XFAIL to be reported among the messages, but retain the
TODO annotation of the first on the test line of a subsequent B?PASS,
if nothing more drastic happens in the mean time. So now more than one
B?XFAIL can be reported, the test is still marked as a TODO and we
don't get duplicate test lines for a subsequent non-passing result.
This replaces the bool m_wasExpectedFail member with a QTestCharBuffer
m_firstExpectedFail that records the first XFAIL's TODO line (so its
isEmpty() fully replaces m_wasExpectedFail).
Previously, the at/file/line information for a B?XFail would be
supplied as top-level keys in the YAML block for a "Pass" reported as
not ok due to the XFail, as this location information is now part of
the B?XFail's message in the extensions/messages block. Duplicating
the first B?XFail's location at top level would add complexity and is
arguably misleading, as the test result is really a pass (after
ignoring known issues), and the location of the pass is indeterminate
(nominally the end of the test function, but actually also after the
cleanup() call for this test, when relevant), which is why a Pass has
no location information.
Task-number: QTBUG-96844
Change-Id: Ib3f24f56266ff49bf3bc9759ac8263ac69a62130
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In the process, split it from its comments block and don't bother with
a YAML block if it would only have contained comments.
Task-number: QTBUG-96844
Change-Id: I08c20f796252bb270ba9caa4c055cdcc0843a88b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The ASN.1 parser for a date-time had to check the date-time string was
all digits to catch the case of a sign in the month field, which used
to be accepted when it should not be. That bug has now been fixed, so
remove the work-around and add a second date-time test-case, renaming
(and modernising) the existing one for consistency.
Task-number: QTBUG-84349
Change-Id: I649c5129312b6865af08b22ba6893cb4e29243f8
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Commit a35a7fcb5a introduced the usage
of insets to correctly take into account the default Android status bars
and other reserved regions.
However in practice that does not work as expected - the bottom inset
is always reported to be non-zero, even when fullscreen mode is enabled.
To fix the issue, FLAG_FULLSCREEN is explicitly checked before applying
the insets.
Fixes: QTBUG-99624
Pick-to: 6.3 6.2
Change-Id: I8b25f0b06447cd452c42ef072493e3137e25f38b
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Fix some obvious issues, QSKIP or blacklist other problems.
This does not fix all the test failures, but allows to enable most of
the test cases, so that we could catch future regressions.
Task-number: QTBUG-87668
Pick-to: 6.3 6.2
Change-Id: I1ed0b476d4ac55c658c572cfa1379fcdc6137ee8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Do not try to properly specify a path to an external syslocale app,
because the related test can't be executed on Android anyway.
This fixes a failure in initTestCase() and allows to unblock other
test-cases.
Also skip systemLocale() test, because Android platform plugin already
creates a custom QSystemLocale instance, so a hack with MySystemLocale
does not work.
As a drive-by: simplify the #ifery in initTestCase() and remove an
unused second parameter of QSKIP() in emptyCtor_data().
Fixes: QTBUG-87414
Pick-to: 6.3 6.2
Change-Id: Iefc587062362469856fdca77f9ec9d96f5552e45
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The tests started failing for some reason, so blacklist them to
unblock the CI.
Task-number: QTBUG-102095
Task-number: QTBUG-102096
Change-Id: I3e0667581bb1a9fd08dedcdab08878b1f738ac92
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When producing a diagnostics block, include the file and line
information, if we have it, to describe it. This presently only adds
this information for skip, but could in principle do the same for a
B?XPass.
Task-number: QTBUG-96844
Change-Id: I6cc375d98e2369eba262010f9c2dfbcba931a6f1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Our TAP output was delivering messages as comments before the test
line, where TAP clearly expects the details of a test to follow its
test line. Version 13 provides a YAML block to deliver diagnostics and
encourages use of this, so accumulate our messages in a
QTestCharBuffer instead of emitting them one by one.
However, messages produced after a test has produced its test line
belong to that test, but are too late to be included in its
diagnostics block, so should be emitted immediately as before, albeit
now with a type prefix. This at least separates such messages, from
the end of one test, from messages produced early in the next.
In the process, add a type-prefix to each, to make clear what type of
message it was. Since the Yamlish supported by TAP consumers doesn't
support a way to have many messages, use the extensions: top-level
hash tag with a messages: sub-tag to gather our messages as a list.
(This expands at least one expected output file significantly and
substantially rewrites some others.)
Add methods to QTestCharBuffer, and a helper function, to support this.
Task-number: QTBUG-96844
Change-Id: If44a33da5879ed1670ef0980042599afd516f9d2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Now when 71b3d18ea7 is merged,
we can re-enable the previously skipped tests, as they do
not crash anymore.
Task-number: QTBUG-101423
Task-number: QTBUG-101321
Task-number: QTBUG-87417
Pick-to: 6.3 6.2
Change-Id: I6b4b3619b0af5e48b5e92b514bc0ab6586a76d51
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The test was failing because test data was not provided correctly.
That was fixed in 4aea86f5e8 but the
test was never unblacklisted.
Fixes: QTBUG-87418
Pick-to: 6.3 6.2
Change-Id: Ibef7dcfaf59ef50f90d6538a562d03af17f065e0
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Needed for QNX, don't be overly specific with XcbUnix.
Pick-to: 6.3 6.2
Change-Id: I240313bc48d9d81d1f18f27ee11f7c9352e3e452
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
- Use QT_ANDROID_EXTRA_PLUGINS to specify a correct plugins directory
- Update plugin names on Android to match the expected format
- Add explicit dependency on the plugins, so that they always get built
and included in the APK
- Update the test code to respect the fact that plugins are packed
differently on Android.
All these steps allow to enable this test for Android in CMakeLists.txt
Task-number: QTBUG-87438
Pick-to: 6.3 6.2
Change-Id: I09e389c761688cea216d8922b94ea3a2600f7a67
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
- Use QT_ANDROID_EXTRA_LIBS to correctly deploy libraries on Android.
- Update the test code to use the application libraries directory
instead of resources on Android.
This allows to enable the test for Android in CMakeLists.txt
Task-number: QTBUG-87438
Pick-to: 6.3 6.2
Change-Id: I2f6d2d4f3ab3872cf7d7fad1668b5c2c3eef3aad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The test will never pass on Android because it's missing permissions
to read root filesystem.
Skip the test instead of blacklisting it.
Fixes: QTBUG-87427
Pick-to: 6.3 6.2
Change-Id: Ib57a49b1d2bc4204f8aa2c3028c7220d23ff2a91
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Skip a test that uses QProcess instead of blacklisting it.
Re-enable this test in CMakeLists.txt, so that it can be checked
in the CI.
Fixes: QTBUG-87431
Pick-to: 6.3 6.2
Change-Id: If8a4acd60735f355dffa60c28b8d07695ee33ec8
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
For x86_32 the alignment of QBasicAtomicInteger<8 bytes> is not
equal to the alignment of TypeInStruct<8 bytes>, so do not perform
the check.
Fixes: QTBUG-87422
Pick-to: 6.3 6.2
Change-Id: I6e6c6cb7b2b7195e430d6a6991004bcfce16d4cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It relied on the set(QT_REPO_MODULE_VERSION ...) line being the first
thing in the file. It no longer is, and the variable is referenced in
an earlier condition.
Change-Id: I2bd2abd2a5680782ddd61f4bf4a4a3265b444d52
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Copying lot of testdata over NFS to qemu image start failing with
errors of "No space left on device" even there is enough space left.
Pick-to: 6.2 6.3
Change-Id: I2a417ed5b8c131e0a1f68c37b1fc2446ea013304
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The zone name was reported if isValid() failed, but not if
isTimeZoneIdAvailable(), where it also proved useful in uncovering
ICU's use of over-long zone name components.
Change-Id: I4b3b65b1a4a338b638c01fc7ad47294118ee0efc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The exception was previously limited to Android, but I now find that
ICU has the same over-long names; it seems likely that's where Android
gets them. Also update the link to the theory page from the TZ DB, as
it now has an official home on www.iana.org.
Task-number: QTBUG-99747
Pick-to: 6.3 6.2
Change-Id: I9af67426d15609dfaf5f335405ceb1218fcf40ff
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If the active QWidget gets destroyed, then QWidgetWindow::focusObject
will return nullptr. If then no other object takes focus, then we'd
never emit change signals, and QGuiApplication's _q_updateFocusObject
(which then informs the input context and emits signals) didn't get
called. This left the input context with a dangling focus object
pointer, which resulted in crashes.
If the QWidget clears its focus, but the corresponding window doesn't
know that it had focus, then fall back to the widget's focus widget
to see if we have a change in focus, so that signals get emitted.
Add a test case that shows that we didn't call _q_updateFocusObject
by counting emissions of the QGuiApplication::focusObjectChanged
signal, which we emit in this function. The signal is emitted more
than once both when showing a widget, and now also when destroying
a widget that has a focus child. The former is a previous issue,
the latter is an improvement to not emitting the signal at all.
Pick-to: 6.3 6.2
Fixes: QTBUG-101423
Fixes: QTBUG-101321
Change-Id: Ib96a397211d442f52ce795a3eebd055a0ef51b0d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If the QPromise is being destroyed, we should signal the associated
futures to stop waiting. No matter in which state the promise is, if
it's not finished, we should always cancel to avoid infinite waits.
This is also what docs state:
"The promise implicitly transitions to a canceled state on destruction
unless finish() is called beforehand by the user."
Fixes: QTBUG-101284
Pick-to: 6.3 6.2
Change-Id: I65ebfefe03b79b41afacda78a4f49938c54d8b37
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Currently test relies solely for external test server. This makes it
not possible to run test successfully with environment where docker is
used.
Pick-to: 6.2 6.3
Change-Id: Idf7e99c19ab630065b651f2f6d957311f45f0db7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Currently test relies solely for external test server. This makes it
not possible to run test successfully with environment where docker is
used.
Pick-to: 6.2 6.3
Change-Id: If716921ce6ceea1ced2d0d7025c6e9768b4ed7a7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Only (straightforwardly) implementable with modern APIs, and
only really exists to handle special platform cases, such as
when a video framework gives us a D3D texture array with
D3D11_BIND_DECODER | D3D11_BIND_SHADER_RESOURCE
which is only possible to use as a shader resource if the SRV
selects a single array layer.
Has no effect on the normal usage of texture arrays, where all
array layers are exposed, and it is the shader that selects the
layer when sampling or loading via the sampler2DArray. That
continues to be the standard way to work with texture arrays.
Change-Id: I0a656b605da21f50239b38abb83067e0208c1dbe
Reviewed-by: Piotr Srebrny <piotr.srebrny@qt.io>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Don't mix unsigned and signed types in comparisons.
Pick-to: 6.3
Change-Id: Ia4ba9c114177425a21cadc8cafe8179928315a5d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
After cbf1b4bc60bca3994b8f8685ee922e53a6b4eed2 the selected item got
deselected on Ctrl+Press, which made Ctrl+dragging a selected item
impossible.
Only deselect on Ctrl+Release. Add scenario to existing test case,
and update the documentation to clarify the properties involved, and
to point out that the event parameter might be nullptr.
Fixes: QTBUG-101647
Pick-to: 6.3 6.2
Change-Id: I749b1cb1a0a311f5c1d4c333984716f05f2c90b5
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Volker Enderlein <volker.enderlein@ifm-chemnitz.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
To enable using `ninja tst_qlocalsocket_check` and have the
helper (re)built as part of the dependencies.
Pick-to: 6.3 6.2
Change-Id: I8703c4202a97606991d1cffe0d0f8e909a51f12f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Skip some of the obviously failing QCompleter-related tests instead of
blacklisting them.
Skip a test that causes a crash.
This allows to re-enable this test in CMakeLists.txt for Android.
Task-number: QTBUG-87417
Pick-to: 6.3 6.2
Change-Id: Ie7ee708df8ceddf117689e8ac749850ba86e8816
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This test doesn't fail on Android anymore, so don't use QEXPECT_FAIL.
Pick-to: 6.2 6.3
Task-number: QTBUG-100470
Fixes: QTBUG-69242
Change-Id: I5a96566728a486c701656aede1818e7ab7f019be
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The test is very flaky on Windows 11. Make sure that we have a secondary
window to close before proceeding, and wait for fade effects to finish,
otherwise we might never get the leave event from the windowing system.
Also replace a QVERIFY(qWaitFor) construct with a simple QTRY_VERIFY.
With these changes, a local run of 20 repeats of this test on a stressed
VM improves from 75% to 100%.
Pick-to: 6.3 6.2
Fixes: QTBUG-98477
Change-Id: Iedcc175b336e3cab23817b954aba1736d02f1b9d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When a B?Fail's description doesn't match the QVERIFY/QCOMPARE
regexes, it got output as a comment in the YAML block after the test
line had already reported it as a TODO comment. An empty description
would also have lead to an empty comment in the YAML block. Condition
this fallback output case on there being a description that hasn't yet
been reported in the test line.
Task-number: QTBUG-96844
Change-Id: Id7fe81d26ddb01da3d8003ada8fa590a5e1a166f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In all places but one they were treated the same; fix that last one to
match the rest. This removes one line from the YAML block for each
blacklisted XFail test; in each case, this message duplicates the one
on its "not ok ... # TODO..." test line.
Change-Id: Iff2028afccd979db7f2c84e85d1b78541900008e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In some situation we want to notify even if the value didn't change.
Task-number: QTBUG-101771
Pick-to: 6.2 6.3
Change-Id: I7d82a9f6e0f7d5eb48065e3f428b814939181ea8
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Don't use deprecated methods in tests, and don't refer to them in
documentation.
Change-Id: I110480742d9a7b9b0a2e194e3fe610208c1e07da
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This has performance benefits when doing comparisons.
The check is only performed at compile time.
Task-number: QTBUG-101014
Change-Id: I55694b045fe5e75d9671d0a3a70c80d998cf98c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adapt to changes in QWidget::addAction API from 08e4d2db08.
Pick-to: 6.3
Change-Id: If6e05b47de88cf55070238f08b96586b855cc5c1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This was lost when QtCore, QtGui and QtWidgets were split up. Restored
now via a virtual function on QObjectPrivate.
Chose to return std::string instead of QString or QByteArray because
its SSO is usually sufficient to hold these flag strings.
[ChangeLog][QtCore][QObject] Restored printing of Qt3-style
information from dumpObjectTree().
[ChangeLog][QtWidgets][QWidget] Restored printing of Qt3-style
information from QWidget::dumpObjectTree().
Fixes: QTBUG-101732
Change-Id: I39ff5728ea5f5abbdbf81b5d7e13b8d16b6ee8b7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
... in preparation for replacing the QString keys in the public API
with QAnyStringView ones.
This removes the "important optimization" that avoids a detach in the
common case where the input is the same as the output of
normalization. But that optimization is beside the point, because it
trades a memory allocation avoided in the library for O(N) allocations
inserted into user code for each call to QSettings::value(), the vast
majority of which are calls with string literals.
With the public interface ported to QAnyStringView in the follow-up
patch, we can then internally optimize memory allocations _in a central
place_ (e.g. by returning std::u16string or QVarLengthArray<QChar> from
normalizeKey() instead of QString). But first we need to get rid of all
the unwarranted allocations in user code.
Change-Id: I45fc83d972c552a220c9c29508001d3f172e1162
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
