don't try to install the primary target, as it obviously doesn't exist.
however, we must not disarm bundle installation.
Change-Id: I3074150f749220d77c1210a4978e71aff9c9a3a9
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QMAKE_BUNDLE_DATA itself does as well, and it can refer to versioned
resources.
Change-Id: I3d9bf23c2ff81dbb1cd929f3f0e0ce1e67f3258a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Remove a superfluous implementation of
VcprojGenerator::replaceExtraCompilerVariables.
The implementation in the base class is exactly the same.
Use that instead.
Change-Id: Ie7d995be1b0d55fbefd15ae6b7a992237d97839c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this affects only files explicitly listed via the .clean member without
placeholders, so more or less a corner case.
Change-Id: I7bd55948130aaee116d1a4bebbad0c445b76197b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it helps enormously to put spaces between target names ...
Task-number: QTBUG-45533
Change-Id: Ic41f8287c6c37761b1be3ad7c383b5c7fb714b12
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
people may use extra compilers which refer to CXXFLAGS & co., so set
them up "as normal".
Change-Id: I858ca63370a7aed66e04f5417da078b896feefc4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Evaluate the .output variable of the extra compiler to determine
the file extension of its output.
The VS project generator needs it to determine the filter that
will contain the output file.
Change-Id: Iab1e154a712342401e17421c08975fad13967a5b
Task-number: QTBUG-45717
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
instead of allowing arbitrary input and output base paths, restrict them
to the project input and output dirs (in any permutation), which are the
only cases ever used anyway.
this permits much clearer call sites, and allows later optimizations.
Change-Id: I48d149a4417af5c858e66ec57c476a5bc6b17f17
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
explicitly use the correct directories instead of temporarily changing
into the output dir. this makes the code less obfuscated.
Change-Id: Ia935987f486151ae556910703cc20945c7610ffc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
turns out that a relative path makes some versions of Xcode crash.
so use an absolute path again.
fileFixify() has been fixed for shadow builds to make this possible.
This reverts commit 6ccf0a326e.
Task-number: QTBUG-45424
Change-Id: Ica87c6c29f990f56e42c399b6d9b1c7eacdd13a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
... instead of sheepishly assuming qmake_pwd().
it also canonicalizes consistently with the relative output path now.
Change-Id: I86231f7259179020643405f3c0e696a74031aa4e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it would trigger only if the input file name was already absolute,
matched the native path separator, and some (likely) other conditions.
as this behavior was almost unpredictable, it would be not very useful.
so save ourselves the headache and just remove it.
Change-Id: Ic457f487f6d0ce9f7a5f192859c9efa9c2de2b63
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Make sure we don't pass by value, but by const reference.
Change-Id: Ia432e881d2b8116f22a30dfa31186479784ee4a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
CESDKHandler now retrieves available WEC2013 SDKs from the registry and
assembles a working build environment.
Change-Id: Ifa70f53aca9d1bf2fadf178a331f46c1efca90ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Visual Studio copies all files to be deployed into the MSIL directory
and then invokes MDILXapCompile on it, which checks for managed code and
translates it into native code. The problem is that all entries of the
package will be copied into the MSIL directly, losing the subdirectory
structure (for instance for plugins). Hence we recreate the directory
structure manually by invoking windeployqt a second time.
Task-number: QTBUG-41753
Change-Id: I3d99cbc531bbe883f87b45de37ba71d93472c042
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
The msvc_nmake and msvc_vcproj generators deduced the exe/dll header
version number from the VERSION variable in a "bizarre" way:
VERSION=1.2.3.4567 was converted to /VERSION:1.234567.
But a minor number beyond 65535 is not accepted by the linker.
This fix deduces the major and minor from the major and minor of
VERSION: VERSION=1.2.3.4567 leads to /VERSION:1.2.
In addition, a new variable is introduced: VERSION_PE_HEADER.
With this variable, legacy pro files that rely on the bizarre
behavior can re-create it:
VERSION=1.2.3.45 and VERSION_PE_HEADER=1.2345 lead to the old
result: /VERSION:1.2345 by just taking the VERSION_PE_HEADER to
overrule the new behavior.
Task-number: QTBUG-44823
Change-Id: Ie093ade83290c098fe2b2a429ce5d6ed6dc750ea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
QT_INSTALL_LIBS is not the right place to check for Qt dlls, as they
cannot be found there in a non-developer build. In order to be able
to find the dlls and make adding dll locations easier for the user,
QMAKE_DLLS_PATHS was added. On Windows, the variable points to Qt's
bin directory by default.
Task-number: QTBUG-44960
Change-Id: Ie4e5beeaadee798a055599387e842d7c0502c27a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Will be active when running test apps through Xcode's 'test' action,
and reports QtTestLib test objects and functions to Xcode as XCTest
cases.
This allows running tests on both iOS Simulator and iOS devices from
the command line, through xcodebuild, without relying on any 3rd party
tools. It also integrates Qt test failures and passes into the Xcode
IDE, which may be useful for closer investigation of test failures.
The feature is limited to Xcode 6.x.
Change-Id: I33d39edbabdbaebef48d2d0eb7e08a1ffb72c397
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Files in DISTFILES are placed into a "Distribution Files"
folder under the project node.
Task-number: QTBUG-43162
Change-Id: Ib75aacf1010d9ea63af89d4a9cc92275d714b3cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
17d690952b missed a few instances that should have showEnvVarsInLog = 0.
Change-Id: I8f1106426447670b0057aeb421efc09bf117e969
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
In de5553aa, qmake was fixed to resolve QMAKE_INFO_PLIST based on the
current pwd to fix QTBUG-21267. This fix was lost as part of 8c138054
in 5.4.
This fixes the error:
"WARNING: Could not resolve Info.plist ..."
when using qmake for shadow builds on OS X.
[ChangeLog][qmake][OS X/iOS] Fixed QMAKE_INFO_PLIST path resolution
for shadow builds
Change-Id: Icb42b2b3a44856f9b9a86a008081a3353951640d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
MSVC creates .lib file when ever dll with exports is built. Remove
this file too in distclean target.
Task-number: QTBUG-44685
Change-Id: I84ecb57626926b5bce06a200ff2b705fd2117686
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Xcode has a setting for script phases to filter out the environment
variables, so we don't need to use grep.
Change-Id: Ica1c64321385ab3e3b47cf6f8f4d4191bd963540
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
it makes no sense to let every spec do that separately, as it's fixed
by the generator+shell.
putting it into a file which is loaded regardless of the spec also
allows us to remove the hardcoded fallbacks from qmake.
if somebody overrode the values in their spec for some weird reasons,
they'll need to override spec_post.prf.
shell-{unix,win32}.conf are now dummies and print warnings.
Task-number: QTBUG-37269
Change-Id: I66c24fb4072ce4d63fdbfc57618daa2a48fa1d80
Reviewed-by: Jochen Seemann <seemann.jochen@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
A scheme is required to be able to run tests through Xcode, even from the
command line, but Xcode doesn't auto-generate the schemes until launched
as an application. Xcode also auto-generates schemes for all our targets,
but we only need one for the primary application target.
Change-Id: Ia42f3825aba3ffde3be93be55e165d6284434853
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
we strip the path a few lines above already.
Change-Id: If7524b8e744d2f1ab2f5a6920097d25671449829
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it's easy when it is a simple list of files (or just absent). however,
it can also contain expandos, and in this case it's definitely not a
good idea to treat it partly (but not really) as a single shell command.
Change-Id: I7ef32a56f276b06579fc7094357c5f7612eaf205
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
first replaceExtraCompilerVariables(..., NoShell), then fix the final result.
Change-Id: If8cebeaa59f48d91b33b5a74e6a48a0d2d049643
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it makes no sense to call it on paths that are fixified right before or
after, as fileFixify() calls it itself.
and verifyExtraCompiler() calls normalizePath() on its file argument.
Change-Id: I8fb21e129fd29428d1855de73483087842bc1bdd
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
in most cases, it actually means normalizePath() (because the file name is
used with qt i/o functions afterwards).
this affects QMakeLocalFile::local() as well, so many not immediately
obvious places are affected as well.
there was also one case of fixPathToTargetOS() falling into this category.
this is mostly a no-op, as the qt functions are agnostic to the path
separator.
in some other cases (in particular in the vcproj generator), it actually
means fixPathToTargetOS().
this is mostly a no-op as well, as the two functions are equal except on
msys anyway.
in the <meta file>FileName() functions, the use of a fixPath*() function
is bogus in the first place - fileFixify() already does
fixPathToTargetOS(), and this is correct when the file name is used
verbatim in a make command (which it is). otherwise it's irrelevant.
Change-Id: I26712da8f888c704f8b7f42dbe24c941b6ad031d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no reason why there should be unexpected leading or trailing
whitespace in an extra compiler's .depends list.
Change-Id: I46be75063180131e135fc6eea0238a482073618a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of quoting more or less random variable contents early,
consistently quote everything only right before it is needed. this way
we can be sure that everything is correctly quoted, but not over-quoted.
this removed the need for the insanity that unescapeFilePath() and
similar ad-hoc contraptions were.
this had the somewhat counter-intuitive effect that it was possible to
remove escapeFilePath() calls from PBX::writeSettings() calls - these
were actually only unescaping.
[ChangeLog][qmake][Important Behavior Changes] A lot of quoting issues
have been fixed. As a side effect, qmake has become more sensitive to
over-quoted file names in project files.
(*) ok, maybe not. close enough.
Task-number: fatal: out of memory
Change-Id: I8c51cfffb59ccd156b46bd5c56754c480667443a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
fixing and escaping is now a tri-state option:
- none (this removes the need to unescape the result right afterwards in
some cases)
- local shell (for system())
- target shell (for Makefile)
Change-Id: I5b78d9b70630fe4484dc964eff5f62793da35764
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Use of FileFixifyAbsolute with non-default in_dir and out_dir
is not defined (and produces bogus results).
Using FileFixifyRelative when handling QMAKE_BUNDLE_DATA as a relative
path is fine.
Change-Id: I49902dc9f5b8029d092a4419c0cff5483e419c30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit 8ee2e497 introduced a regression for CONFIG-=flat vcxproj files.
Files with custom build steps (e.g. foo.h with Q_OBJECT) were written
into top-level filters ("Header Files" instead of
"Header Files\my\sub\dir").
The assumption that the parameter filtername always equals
VCFilter::name was wrong.
Change-Id: Id5178550310d06b73e42f18597a27012ddd89bb7
Task-number: QTBUG-44413
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
We already have saved this information in the loop above.
Change-Id: Ic0e0a66b01e9ee001932d7d798d848abc746ef95
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit 4f21eb03 broke the generation of non-flat vcxprojs.
XTreeNode passes filter names to outputFileConfigs that have
the source subdirectory suffixed (e.g. "Generated Files\subdir").
Function filterByName must be called with the substring before the
backslash.
Change-Id: Ic259e6316ab0727828773b13e0d8ad0cc7f0808f
Task-number: QTBUG-41746
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This reverts commit e5a8134765.
A much simpler fix for QTBUG-41746 is about to follow.
Change-Id: I1eea1785e00b4d7d470108d8dc3272a2af438ef4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
qmake seems to be adding current date/time to the .la files for no
reason, so let's stop do that.
This way, two invocations of qmake actually gives bit for bit similar
output of .la files.
Change-Id: I93c7c4075cc1e05214849eec8629f41ce01e5914
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it makes no sense to test for OBJECTS_DIR emptiness when we are going to
use DESTDIR instead.
Change-Id: I0f7115fc8a9fe2a996417d5f50bd0165773129fa
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
that makes no sense at all. and OBJECTS_DIR is not resolved, either.
Change-Id: Ie76b9de6bb11ae42945255f2e168943066d2f60d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
