Following the RFC4122, provide the interfaces between QUuid
and QByteArray, they are simpler then toByteArray() and
relevant.
Thanks for the suggestion and brief code from Robin Burchell.
Task-number: QTBUG-19420
Reviewed-by: joao
(cherry picked from commit 06873e467d98ad60d827afae29500bf2ff783c03)
Change-Id: I4623ae3363f1d5affa45de73fac616bb67a9eaa1
Reviewed-on: http://codereview.qt.nokia.com/168
Reviewed-by: Liang Qi <liang.qi@nokia.com>
It doesn't need to copy anything when pos is after size().
Task-number: QTBUG-19164
Reviewed-by: Oswald Buddenhagen
(cherry picked from commit 8befc4982a32752e48c82cacbed045e7336a3569)
Change-Id: Iccac75842616f0d41e457e844a15d1a3ccfeb642
Reviewed-on: http://codereview.qt.nokia.com/164
Reviewed-by: Liang Qi <liang.qi@nokia.com>
This test uses private headers. Mark it as such.
Change-Id: Icb6463629e1414b9da5403d0e0d766d8a113bd57
Reviewed-on: http://codereview.qt.nokia.com/160
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
If a project uses "load(qttest_p4)" it doesn't need to add testlib to
the CONFIG or QT variables. If a project does not use
"load(qttest_p4)", it should add "testlib" to the QT variable.
Change-Id: If28353713ccdfe13612682e3e88dadebe2f2eefd
Reviewed-on: http://codereview.qt.nokia.com/159
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Some complex widgets might get a negatively sized rectangle when
calling QWidgetPrivate:setGeometry_sys_helper(), triggering a infinite
recursion. Normalizing the rectangle size before checking for size
change is enough to break this infinite recursion.
Task-number: QTBUG-17333
Change-Id: I4682c3088ea53fb9f28f746c8264f573b5284825
Reviewed-on: http://codereview.qt.nokia.com/156
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Also disable tests with std::vector in c++0x as they do not compile
Reviewed-by: Joao
(cherry picked from commit 38d1b31006ecc83811bbb13e5a4182eac593a970)
Change-Id: I837f18f043b18410c1d93b9f1156acf729dad510
Reviewed-on: http://codereview.qt.nokia.com/144
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
QThread::isFinished() can return false after the finished() signal is
emitted, so test the event loop's timeout() function instead.
Don't compare prescan configurations, as these may be cached by the OS.
It was causing the test to fail on linux if run before any other network
test.
Reviewed-by: mread
(cherry picked from commit e2320ec17446dc6e851fcf4ea2d998177b0d8049)
Change-Id: I35d67294871a35e2e63619f4acb0c3c32caa5eea
Reviewed-on: http://codereview.qt.nokia.com/137
Reviewed-by: Markus Goetz
Test required updating due to ebc134db484eee31491836b619aad1ee86e3070e
Reviewed-by: Martin Petersson
(cherry picked from commit e46e32644720f0ddeb553b8a658c1711a4b5cdfb)
Change-Id: Idf3df633534a0d914bd22fd589a8c521eb426bc8
Reviewed-on: http://codereview.qt.nokia.com/139
Reviewed-by: Markus Goetz
QTEST_ACCESSIBILITY was always defined and only used in one autotest.
Code that uses accessibility features should be excluded if Qt was built
without accessibility rather than based on a define in the test
framework.
Change-Id: I3a517a579a51f536a0983b43bd99e86292026552
Reviewed-by: pending
Reviewed-on: http://codereview.qt.nokia.com/129
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-staging: (21 commits)
Fixed line endings.
Update licenseheader text in source files for qtbase Qt module
New configure.exe binary
Add -qpa option on Windows
Use qglobal.h's VERSION number instead of hardcoded current version
More examples adjusted to Symbian and Maemo5. (cherry picked from commit a97b9620a584c9b1a2e006873183526b3d7e001e)
Doc: Added some details to the accessibility events API documentation.
Doc: Fixed qdoc warnings.
Doc: Fixed qdoc warnings.
Doc: Made an additional change for clarity.
Doc: Noted that the example will not work as expected with a mouse.
Doc: Fixed qdoc warnings.
Doc: Applying a pending change from previous merges.
Doc: Fixed qdoc warning.
Doc: Fixed qdoc warnings.
Doc: Applied pending fixes to API documentation.
Doc: Various fixes to documentation, some based on changes in master.
Doc: Added missing project and desktop files.
Doc: Documented the value returned when no field can be found.
Squashed commit of changes from the 4.8-temp branch.
...
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-earth-staging:
QUrl auto test: include core-private headers
QUrl TLD: fix documentation file for "Add QUrl::topLevelDomain() ..."
Add QUrl::topLevelDomain() and move TLD table from QtNetwork to QtCore
Move Qt's copy of the Mozilla public suffix list from QtNetwork
to QtCore and use it to expose a new API function QUrl::topLevelDomain().
This function returns the section of the url that is a registrar-controlled
top level domain.
QtCore now exports a couple of functions to the other Qt modules: qTopLevelDomain,
a helper function for QUrl::topLevelDomain(); and qIsEffectiveTLD(), a helper
function for QNetworkCookeieJar.
The motivation for this new API is to allow QtWebKit implement a Third-Party
Cookie blocking policy. For this QtWebKit needs to know the element of the url
that is the registry-controlled TLD. Without this knowledge it would end up
blocking third-party cookies per host rather than per registry-controlled domain.
See also https://bugs.webkit.org/show_bug.cgi?id=45455
Merge-request: 1205
Task-number: QTBUG-13601
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
(cherry picked from commit 154402f56dcf8303a6ce601a52215226af8d31ba)
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-earth-staging:
add auto test for SSL certificates containing utf8 characters
fix coding style for merge request re. utf8 characters in SSL certs
Use OpenSSL X509_NAME_ENTRY API to parse UTF8 subjectName/issuerName
Qt's Shift-JIS codec maps the characters 0x5c and 0x7e to unicode yen (0x5a)
and unicode overline (0x203e). ICU and (as it turns out) Symbian's native
Shift-JIS codec preserve 0x5c and 0x7e when converting to Unicode.
Qt's behaviour creates a problem when loading japanese web sites that are
encoded in Shift-JIS. When they reference external JavaScript files, those tend
to inherit the current page encoding (unless the character set is explicitly
specified). Consequently JavaScript tends to contain regular expressions (as a
built-in feature of the language), which in turn uses backslashes for escape
sequences. Therefore it is crucial that the encodings used to decode the script
preserve the ASCII range, i.e. do not convert 0x5c (ascii backslash) to
something else.
This patch corrects the behaviour of Qt's Shift-JIS codec to leave all
characters < 0x80 unaltered in the process of conversion to and from
Unicode.
Task: QTBUG-19335
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
(cherry picked from commit 8e321cd869da7ff1cf0168da41aa0246b44867cc)
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-staging:
tst_qhostinfo: Fix IPv6 lookup detection on Windows.
Fix incorrect hardware address on systems without getifaddrs()
Make QHostAddress.toString() follow RFC-5952 for IPv6 address format.
Moved the QTcpServer test to init winsock before we use getaddrinfo.
Reviewed-by: Shane Kearns
(cherry picked from commit 0ccf01368adcabbb25958a55976083f72116a2d5)
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-staging:
Remove mention of qt3support in makeselftest
Remove Qt3Support test data from lancelot test
Remove Qt3Support code from algorithms autotest
Don't link qt3support lib in QMessageBox autotest
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-staging:
Remove Qt3Support code from QVariant autotest.
Remove obsolete test data
Remove Qt3Support code from QMenuBar test, part 2.
The data was already commented out and thus unused.
Change-Id: I234cea542bbacf429b6cb1fc0c9feec4f80e47e5
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
qHeapSort and qBubbleSort were Qt3 functions that were replaced by
qSort. During modularization, the Qt3Support header containing these
routines (q3tl.h) was moved into the algorithms autotest, presumably
because that was the only thing that still included the header.
However, as these routines are not part of Qt5, they don't need to be
tested anymore. This commit deletes the q3tl.h header and the test
functions that tested it.
Change-Id: I52eed7b4b4db3bd671dc6dbd752642bc9e783c30
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
This commit removes the four columns of test data that were only used
for testing Qt3Support features.
Change-Id: I93116b64ac49b0d6812595dfd58962ba8afbdad1
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
Remove test data for Qt3Support functions from the QTextStream autotest.
The code that used this data was removed in an earlier commit.
Change-Id: I26e34cdefd47287c6992cf1d31276a40994c607c
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
Follow-up to previous commit: remove the "_noQt3" suffixes on test
function names and the "_Qt4" suffixes on variable names.
Change-Id: I000e87357b025930b0065efc1d0de05c2cd07bba
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
This warning is pointless as the user can anyway check if the color is
valid after making the call by calling isValid(). Using isValidColor()
could be used but it has a big performance overhead as validation then
needs to be done twice.
Task-number: QTBUG-19098
Reviewed-by: Erik Verbruggen
(cherry picked from commit a423ff5474b89028eeca95b254f5184311c8223b)
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-staging:
Compile IPC tests.
Always call XInitThreads.
Remove redundant #ifdef's from benchmarks
Improve coding style of qdatastream test
Don't use Qt3Support in arthur test suite.
Remove Qt3Support code from QMenuBar autotest
Remove Qt3Support code from QSplitter autotest
Remove Qt3Support code from QSharedPointer autotest
Remove Qt3Support code from QComboBox autotest
Remove Qt3Support test code from accessibility autotest
tests: allow unstable tests to be marked with CONFIG+=insignificant_test
Expand literal tabs and format switch statements in accordance with the
Qt Coding Style.
Change-Id: I64e638b730f4be2bc707136b1b7e5585d6808731
Reviewed-by: Rohan McGovern
Note that the functions suffixed with a 3 were actually the Qt4
versions, which is why this patch looks strange.
Change-Id: Iec874153248f57b8696a289cb13eb60fecc5699c
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
This commit removes the second-last column of test data
(labeled testQt3Support) of the insertItem test function.
Change-Id: I2158bdb5a77c9eaf1424998f51fb03a8df934490
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
QWMatrix and QColorGroup were Qt 3 classes and QPalette is substantially
different in Qt 3 and Qt 4.
Change-Id: Iee176fcf237c3f9ac2ffd7f1fd9e4963dc4df39c
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-staging:
tests: fixed compilation of tst_qtextstream
QUiLoader, QAbstractFormBuilder: Introduce errorString().
Enable configuration for Xcb
Fall back to using paths for large fonts in drawStaticText()
Add ability to work around non-standard GLES implementations
Fix broken drawing with large fonts using QStaticText and FreeType
Remove Q_ASSERT's from qdbustype autotest
Remove autotest code for Qt3Support library.
Compilation of this autotest was broken by a strange qmake bug,
QTBUG-19393. Work around it by putting a space between two string
literals.
Change-Id: I494c486dd11858eeaf98d7a04021c74fcf3cbba7
In 4.8 we added support for using StringBuilder with QByteArray.
But this is breaking source compatibility for people that used
QT_USE_FAST_OPERATOR_PLUS in Qt 4.7. So we introduce a new macro
Notice that QT_USE_FAST_CONCATENATION was not working without
QT_USE_FAST_OPERATOR_PLUS, so we remove the checking of that macro.
Reviewed-by: joao
(cherry picked from commit 8447f5616be731d78081f326bb9cb3f5aa9087a4)
This commit deals with the simple cases -- mostly just removing blocks
of code enclosed in #ifdef QT3_SUPPORT. Later commits will deal with
the trickier cases.
Change-Id: I280dea25b3754be175efe62fc7e5e4e7c304e658
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
This test can't use svg files as QtSvg is a separate module, on which
qtbase does not depend. This commit changes the test to use a pixmap
that was already present in the test.
Change-Id: Iab4ce70aa376a7d2985b69816bd251ce4f5d46cf
Task-number: QTBUG-19244
Reviewed-by: Rohan McGovern
Using Q_ASSERT does nothing in release-mode builds, and in debug builds
it causes tests to terminate prematurely. It is much better to use
QVERIFY or QCOMPARE.
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 3475168550c1a804f04f2a4edfeb30c04cd36551)
Change-Id: Ic39972b685ca35a9a71d9c8d03e8dae31481fb19
Report a fatal error rather than ignoring the error in non-debug builds.
Change-Id: Ib6ef993e6e0c65bd9adea994ea7b454cc147f3d4
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 637456edef085d1825f15429cd921f2f0d4bd6a2)
Rather than aborting in debug builds and failing mysteriously in release
builds, report fatal errors in all builds.
Change-Id: I020b06e19b7ffc8ae4413e1756259f4ca608f253
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit bbfefe1b764cd41b7e677f26621fb6e76a67f9d7)
Report a meaningful fatal error if an unknown token type is encountered
rather than ignoring the error in non-debug builds and reporting an
uninformative message in debug builds.
Change-Id: Id219f3c7cbd4ba3e9875cb81f833720d5d153132
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 1c85fc559ee456a165527d23cb1b7dc237f5504b)
Report fatal errors rather than ignoring them in non-debug builds.
Change-Id: I62dd177e2f391e64c12314bf224f8952ed6f3144
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 4793c3bd1dfddcc98eae12e5caf29ff6aabd31b2)
If populateTestData() would return an invalid model index, report a
meaningful fatal error rather than failing silently in a release build
and aborting with an uninformative error message in a debug build.
Change-Id: I96820429a25ce5c4eb375d50e7e1f672851e26e6
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 984a72a8bbf853059f0eb7e1054538b48d5f3bc8)
Report fatal errors rather than ignoring them in non-debug builds.
Change-Id: Ieafc58f3603fa953f4a963394039e613dcd442fb
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 6e3fcd6ff50e6435fd90629ed695196d25312ffc)
I missed one Q_ASSERT in the previous commit. Also changing to use
Q_FUNC_INFO instead of hard-coded function names in the warning
messages.
Change-Id: I0ff5b2b2cda02597836beb5d2811fa8dd2a344ab
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 74a4aad171b39018d596b99684286b9426a091a5)
Report a fatal error rather than failing silently in non-debug builds.
Change-Id: I625c5aa6f86a5764cd8f078baa074d6475a67736
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit c0c7e04c9248ce38278aceefeb527f29149cfb4e)
The tryWriteLock testfunction didn't do anything useful in non-debug
builds, due to the thread having the important code inside Q_ASSERT's,
which are no-ops in non-debug builds. This commit removes the
Q_ASSERT's, counts the number of failures in the thread and fails the
test if there are any failures recorded.
Change-Id: I4750f66eeba22ab51ba348ebc06704052421f1ae
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 00f724c943b83f10f9ca9475570708536947538e)
Rather than aborting in debug builds and failing silently in release
builds, report a fatal error in all builds if the helper class
methods are called more than once.
Change-Id: Id1fda8dc7caf008bbc8f6ae6384abee1aa8f50eb
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 0c157af3e5aa7c56c53b9eabe1510cc639610969)
Rather than aborting in debug builds and failing silently in release
builds, report a meaningful fatal error in all builds.
Change-Id: I3b874f187d482e9785a839cab1a3855b631404c3
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 844906474dd6905d36003143a03a2fbccf0ad0dd)
Rather than aborting in debug builds and ignoring the failure in release
builds, report a fatal error in all builds.
Change-Id: I1fb8e692c65cf23cf5d2453173db742260ddca48
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 136f39bbb63706819eb18d000f305edbe1cc6a81)
Don't perform actions needed for the test inside Q_ASSERT, because these
actions won't happen in a non-debug build.
Change-Id: I0758e9f29f38c1a83a1501357286877f05beb6c8
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit b7d421da6d5e945b74ffbc3a7aa635a6ce63ebda)
Don't perform actions needed for the test inside Q_ASSERT, because these
actions won't happen in a non-debug build. Instead count the number of
failures and verify that the count is zero at the end of the test.
Change-Id: Ibe0d194111e5247118d59a7760f0946d2c44faf9
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 8d2127d44e6c8af6b041688376de0e5747a1810a)
Replace Q_ASSERT in helper class with code to count failures and report
meaningful warnings. The test function then fails the test if any
failures were recorded.
Change-Id: I0d6650e6036c8e45729c16d1dbb7543b4fb42553
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 8512dc16553ecf511c40a2ba7a815f777d7d5c59)
Rather than aborting in debug builds and failing silently in release
builds, report a meaningful warning message and return an appropriate
value to indicate the error.
Change-Id: I0ceb0a0bfaef34cc6127d768cc75ecfc5a24e3c9
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 7cb0a3baeb361c9909e8ab2caf436e8e44b6a3b6)
If populateTestData() is passed an unknown type of model, report a
meaningful fatal error rather than failing silently in a release build
and aborting with an uninformative error message in a debug build.
Change-Id: I7ee8d1262bbced304f9f24c2ec9b40a38704d982
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 6b2e89843a573cd7c143bca17cec8e69209d2fbd)
Report a meaningful warning message rather than aborting in a debug
build and failing silently in a release build.
Change-Id: Ic77589143ff0d22c95c7b10f2e511f68b3da4d86
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 75767c69fbba3149a4505287ed441886188a9fd3)
Rather than aborting in debug builds and failing silently in release
builds, report a meaningful warning message and skip setting the
filename, which should cause a subsequent test failure.
Change-Id: I3ae4f4de7b02bf2194019047fa87d8ae06d95634
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit e6f7509f18ae88069373d59073cbdcda88fd19c8)
Rather than aborting in debug builds and ignoring the failures in
release builds, report specific warnings on each failure, count the
failures, and fail the test if the failure counts are non-zero at the
end of the test.
The same change is also made for a QCOMPARE that appeared
inappropriately inside a helper class. QCOMPARE may only appear
directly in a test function.
Change-Id: I81f0ce80512fa72c67f5aa72c0511a4b650d5d20
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 11254ff409395b67cb28453b3c069860bc28c14d)
Report an informative fatal error if passed a null model, rather than
aborting in a debug build and giving a bunch of signal connection errors
in a release build.
Change-Id: Ia240e741b9d6ec03fd5ed3a14cf4fa44b55af911
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 841cc610df61a266ebcca2bfef2542a7d4fea68d)
Report a fatal error in all builds, not just in debug builds.
Change-Id: Ia9e265b2082b55fbac18ca046e586de863ac0623
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 22e99d92a71645d643ebd54c6209bced80f7c5b8)
Rather than aborting in debug builds and ignoring failures in release
builds, report meaningful warnings into the test output and return
sentinel values that will cause QVERIFY/QCOMPARE of the returned values
to fail the test.
Change-Id: I2c5a820637337d0762c71db10a4f270d36b31662
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 524bd6b7120f70a178b03bc6d337e08abd327076)
Convert Q_ASSERT to QCOMPARE and remove mention of Q_ASSERT in comments
to make it easier to check for unwanted Q_ASSERT's in the future.
Change-Id: I7ae250428d4d5682806e724a7207523e65cd9851
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 3290dd0d3563310f6bdbabf74105367bd8c611d3)
These assertions were made obsolete by the previous change to this test.
Change-Id: I3156b273a727f753a6c093c8fc7453b694c777ee
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 57f6ed6664f55ccee62b81750a2b3520249503fd)
Rather than aborting in debug mode and doing nothing in release mode
when the invariant is violated, count the failures and fail the test
gracefully.
Change-Id: Ie193460c478ddde540b6b15aafdce32f471b4b2b
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit f18e0e01468899731bc3777649d69fd6d0041012)
If the test data is incorrect, print a meaningful warning into the test
output.
Change-Id: Ibfe64ef41a0ff3eb47c2385d1c31191334a675a8
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 28ccfa472991c0480e67b5f204a567c4023ba6d4)
Report a fatal error in all builds, not just in debug builds.
Change-Id: Iad990e2d3b29a55e995254d466e967a4a722bb23
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit a212b402da4b4af9d453fa96dbfa2d32271e857d)
Rather than aborting on a bad gesture event in debug builds and ignoring
the error in release builds, record a count of bad events and fail the
test if the count is non-zero at the end of the test function.
Change-Id: I6ddd46a5a656185c13eae4bbbb496b986a0c92f6
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 5953d930bc07fa6734a11d053d26a3f80e9c1e89)
Issue a meaningful fatal error in preference to aborting in debug mode
builds and crashing in release mode builds.
Change-Id: I7bb04e1e222fd6167be19b5d88caac27b43d88df
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit cb126ff7ad08e9801e2911511aa9aeb728faa8f3)
If the test data is incorrect, print a meaningful error message into the
test output.
Change-Id: I505a86b4411619d3c3be9541c96c082f92589ff7
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 8e12d9e322ec7d8f7eece09b6f15cba640615f9e)
Report a fatal error in all builds rather than only in debug mode
builds.
Change-Id: I6b3a999dd3ccf00ae66a86b43c125d7082cf0ae5
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit c183540c6c244f327ebd834167799072dcc3b72d)
Report a fatal error in all builds rather than just in debug mode
builds.
Change-Id: Ie54e55ea2dd13bbb12e4265278db832ac1297c28
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 8a1279b0ae180fae94d3da1a4eeb20df5a748d33)
Verify the success of setting the document content in the test function
rather than using Q_ASSERT.
Change-Id: I25e017e7f92803867a998b4f09ad9f717212a9bc
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit d7453aef14b80a5972909ed99f1b4c765b7436a5)
Report a fatal error in all builds rather than aborting in debug mode
builds only.
Change-Id: I53b348f077c6533433e32bbebd159066a2bc2c37
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 4f818b8bcf51cf9c654edbf319d90f6c77a09b3e)
Report a regular test failure rather than aborting when an unknown
operation is requested.
Change-Id: I3678f42f9e9f895d8d0d49a768d4c8b575d1863f
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 22aa68ecec96da4d14a4c9fe2f6e4a337b13b4a3)
