For consistency, apply the following renamings:
QT_NO_MAKE_EXAMPLES -> QT_BUILD_EXAMPLES_BY_DEFAULT
QT_NO_MAKE_TESTS -> QT_BUILD_TESTS_BY_DEFAULT
QT_NO_MAKE_TOOLS -> QT_BUILD_TOOLS_BY_DEFAULT
BUILD_EXAMPLES -> QT_BUILD_EXAMPLES
BUILD_TESTING -> QT_BUILD_TESTS
This should help to better convey the difference between "BUILD" and
"NO_MAKE".
To configure tests, but not to build them by default, pass the
following to CMake:
-DQT_BUILD_TESTS=ON -DQT_BUILD_TESTS_BY_DEFAULT=OFF
Analoguous for examples:
-DQT_BUILD_EXAMPLES=ON -DQT_BUILD_EXAMPLES_BY_DEFAULT=OFF
Tools can be excluded from the default build with:
-DBUILD_TOOLS_BY_DEFAULT=OFF
The variable BUILD_TESTING is still available and initialized with the
value of QT_BUILD_TESTS.
Pick-to: 6.0 6.0.0
Change-Id: Ie5f29dfbdca8bfa8d687981dfe8c19c0397ca080
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is meant to be called by our CI instructions to build standalone
tests of a Qt repository.
Currently it just calls qt-cmake with
-DQT_BUILD_STANDALONE_TESTS=ON, but it might contain more things in
the future.
The script also simplifies configuring standalone tests locally, due
to not having to remember the name of the magical variable.
Change our CI instructions to use the new script.
Change-Id: I6bc02b4e94adc9d0d05fecb0fe70a561043271f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
qmake sees the QMAKESPEC variable and uses it when building tests,
instead of using the target mkspec written in the target_qt.conf file
by the build system. Unset the environment variable to force usage
of the mkspec specified when confugring Qt.
Task-number: QTBUG-86053
Change-Id: I24ceddd1436393b496665e439dd1441ecbd36df7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Current clause is too broad and new compilers do not work with it
properly. E.g. Clang.
Change-Id: I7afadfec07935e76882d27ec7ab408b0e597654b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reading configure arguments for tests from environment allows control
of CMake args from outside of the module itself. TEST_CONFIGURE_ARGS is
read and appended to host tests build and TARGET_TEST_CONFIGURE_ARGS
respectively for target's tests.
Change-Id: I8270b0254525aec24f7614cba2b90b291e5eb3d2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On regular commits we do not want to waste time running all test if
there is failures.
Change-Id: I050d191058293f4311268169eb26754349930129
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
In qmake builds we can see the moc invocations, whereas in CMake builds
by default we don't.
Modify the Coin instructions to pass the CMAKE_AUTOGEN_VERBOSE cache
variable so that AUTOMOC prints the moc invocations.
Change-Id: I50be13224839fbbdece3c9e8a4935a72aba91a8e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
We don't want to build the host Qt configuration every single time we
do a cross-build in Coin.
Coin learned some new qt5.git platform configuration options, which
allow specifying a dependency between a host Coin configuration and a
target one.
This means we can specify a host macOS config as a dependency when
building iOS, and the host artifacts for all dependent repos
(qtbase, qtsvg, qtdeclarative, etc) will be installed into
/home/qt/work/install (as specified by the
{{.AgentWorkingDir}}/install location).
Same for Linux + Android and Linux + qemu.
Modify the qtbase Coin instructions to use these installed host
artifacts if such a dependency is present (platformDependency is not
null). The target artifacts will be installed into a subfolder of the
host installation, called 'target', e.g. /home/qt/work/install/target.
If a dependency is not present, continue to build a host Qt before
doing a target build. This allows gradual conversion of configurations
in case if some of them don't work, or if the dependencies.yaml have
not propagated far enough for all new repos to use the new
instructions.
In this case the locations of the artifacts are different
host - /home/qt/work/install/host
target - /home/qt/work/install/target
Task-number: QTBUG-85623
Change-Id: I33539f4376034539fb7db80293dc4d39dcb9539b
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Currently configure arguments specified in
qt5.git/coin/platform_configs are only used when configuring
qtbase itself. Sadly, Coin lacks support for specifying per-repo
configure flags.
Until Coin gets the feature, the best we can do is to pass
all the configure flags to each repo we are configuring.
Unfortunately if we pass all of qtbase's configure flags to other
repos it will break cross-compiling configurations (because the
toolchain argument would be overridden with the initial qtbase
provided toolchain instead of the Qt generated chainloading one).
We thus have to separate flags that should and shouldn't be passed
to other repos.
Introduce usage of two new environment variables called
NON_QTBASE_CONFIGURE_ARGS and NON_QTBASE_TARGET_CONFIGURE_ARGS.
Additional configure arguments can be specified in these variables,
and they will be used when configuring repositories, with the
exception of qtbase.
Ultimately, this is needed to disable detection / usage of certain
strawberry perl system libraries in qtimageformats on MinGW.
Doing that prevents crashes of the tst_qtiff test.
Minor implementation note is that the environment variables have to be
explicitly set in qt5.git platform_configs otherwise it breaks the
Windows Ninja Multi-Config configuration with the error
"The system cannot find the file specified".
Supplements 4b4f0be08debcfde62caf4066222b348ce65dea1 from qt5.git.
Amends previous revert 946fc92d20
Task-number: QTBUG-84886
Task-number: COIN-601
Change-Id: Ie4305c5d799bf4a29da5032a691e797b49c3cf33
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This reverts commit adbadc57df.
The change breaks building of repos other than qtbase when
cross-compiling to Android. Not sure yet why.
Change-Id: I6a6efef5360ed141c0c5056afb03b1a0d90439ae
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Currently the configure arguments specified in qt5.git/coin are only
used when building qtbase itself. None of them are used when
configuring other repos like qtsvg.
While in principle passing all the configure arguments to other repos
is not a good thing, we need to do it to circumvent the lack of
support for specifying per-repo configure flags in Coin.
It's needed to disable detection / usage of certain strawberry perl
system libraries in qtimageformats on MinGW. Doing that prevents
crashes of the tst_qtiff test.
Supplements 4b4f0be08debcfde62caf4066222b348ce65dea1 from qt5.git.
Task-number: QTBUG-84886
Task-number: COIN-601
Change-Id: I59be8c62ebb10282db1b0a9da2d3e3e5595c925f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The test runner re-runs failing tests up to 5 times. We did not do this
for the CMake build, and now we're getting lots of flaky tests failing.
Fix this by passing the -repeat until-pass:5 parameter to ctest.
Change-Id: I6ff3c1e7901bc22cafec87b15d087eab2a565c65
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Any failing tests in CMake configurations will now prevent
integrations to go through in the qtbase repository.
Task-number: QTBUG-84886
Change-Id: I8c963cb2540a29a9c8702acd3d282da82fb521e7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Create a new test instructions yaml template that does not ignore the
exit code of running tests. This template can be included by
repositories where tests pass in all configurations tested by the CI.
The template should be included in module_config.yaml via
Test:
- !include "{{qt/qtbase}}/coin_module_test_template_v3.yaml"
This allows us to opt into enforcing test runs per repository,
rather than waiting to fix all tests in all qt5.git repositories.
Implementation notes
Try to extract the common parts of the instructions as much as
possible to avoid duplication. Unfortunately some duplication still
remains due to the restricted yaml language supported by Coin.
Add a short README.md file that describes the differences between the
existing templates.
The v2 non-enforcing test template should probably be removed in
the future.
Task-number: QTBUG-84886
Task-number: QTBUG-85364
Change-Id: I718fc3cb44d6aefdbebc2fd2088a910a8095a375
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Skip crashing tests and ignore failing tests on CMake platforms.
Add missing QTEST_ENVIRONMENT=ci env var assignment to Coin test
instructions. This was hardcoded by the Coin code for qmake
configurations.
Task-number: QTBUG-85364
Change-Id: Id2312e504a0d36b8f8596d4cebaa49c63731406e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We don't really know why, but using the ctest
--force-new-ctest-process flag stops the test from hanging.
Also re-enable the test.
Task-number: QTBUG-78449
Task-number: QTBUG-81365
Change-Id: I33094696dfe3f610dc257089074b1c2a9926f651
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Tests like tst_qmake need the build environment to be able to build
apps / libraries. This is mostly needed for MSVC.
Set the TESTS_ENV_PREFIX env var to point to the proper prefix.bat
(host or target) and use that when running ctest.
Task-number: QTBUG-85240
Task-number: QTBUG-78449
Task-number: QTBUG-81365
Change-Id: I6fa68714202ac7fc703973fc772e03b84790a043
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Before this change, tests were never built for cross-compiling
configurations.
Add instructions that build and run tests for qemu configurations.
This required a bit of abstraction / indirection to find out what's
the path to the correct qt-cmake call, as well as prepending the
correct env prefix to each call (either the host one or the target
one).
Also, the QEMU configuration requires a few environment variables
to pick up the correct runtime linker and which qpa plugin to use
for running tests.
Finally, make sure the tests are not built and run if the DisableTests
feature is set in the configuration.
Task-number: QTBUG-84423
Change-Id: I0cec28c801a657e67cfa48f3c61cfe487109946b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If we configure qtbase with Ninja Multi-Config, we should use the same
generator when building other repositories as well, to ensure that
all repositories have the same set of configurations (debug and
release). To do that, the Coin instructions will call the
qt-cmake-private wrapper which records the generator used.
For standalone tests continue to use qt-cmake, so that only a single
configuration is built (no need to build tests in both debug and
release mode). The configuration built will be the first one from
the initial list with which qtbase was configured (usually
RelWithDebiInfo). This is ensured by the
QtBuildInternalsExtraConfig.cmake file.
Task-number: QTBUG-80900
Change-Id: I701b2f652a22d51e640a6fdf19c3b2d2dfb34d5c
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Calling cmake --install . only installs a single configuration.
To install both debug and release artifacts, the install
invocation needs to be done for each configuration.
To keep the Coin instruction code simpler, delegate the looping
over configurations to a custom CMake script, and use it in the
Coin instructions.
Replace all cmake --install calls in the instructions with calls
to either call_host_install.yaml or call_target_install.yaml.
The path to the script depends on whether we are building
qtbase or another module. In the former case the script should
be called from the build dir, otherwise from the install dir.
The other distinction is whether the host or target env prefix
needs to be added.
Task-number: QTBUG-80900
Change-Id: Ied4bf739e2b1a2307f22fc79c1cfad746c8cbc44
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Don't do any of the MSVC-related instructions when targeting MinGW.
Make sure to pass gcc and g++ as compilers when targeting MinGW.
Don't use any ENV_PREFIX that sets up the MSVC environment.
Task-number: QTBUG-75578
Change-Id: Icf5c39b58391d473d914fe8dc17d062812b07df1
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Using an environment prefix wrapper shell script that sources the SDK's
env setup. The script also ensure that we don't loose cmake on the way.
Change-Id: I9d08bc58f0efaf688512ab26a7ddb800309a5015
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building for qemu, the target "os" is still set to Linux, so try to
detect qemu by looking at the version field.
Change-Id: I7c66cdb29a47a44d5b8a394977136139fc646155
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The friendly named values should be used rather than the
all caps names.
Change-Id: I44dbe8c25d405424c5cd2c9527b6e884511ac269
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
To allow seeing the exact compiler flags when build in Coin.
We do the same for qmake builds.
Change-Id: I8c43f35b95d722d914aaeaa8860720a3a0578737
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Due to a bug in upstream CMake regarding relative paths being encoded
into the build.ninja file when performing in source builds, we need to
build the tests in a standalone directory outside of the source
directory.
Failing to do so will cause the source directory for the test to be
incorrect which can cause tests to fails and never read the
BLACKLIST.txt file. See the mentioned issue for details.
Task-number: QTBUG-82820
Change-Id: Ie5c178a92369d6b9decff625bd9641e53088a9fa
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: Id274bf821f424077e7259ed42433f2ef88153c36
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make sure to split the command arguments after variable substitution
like it is done in call_cmake.yaml.
Amends d445112cc0
Change-Id: Id23fcfa5b58c33e05495413fb10349fbcff1bfac
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This allows doing debug_and_release builds with Ninja on all
platforms.
The "Ninja Multi-Config generator" is available starting with CMake
3.17.
Desired configurations can be set via CMAKE_CONFIGURATION_TYPES.
Possible values: "Release, Debug, RelWithDebInfo, MinRelSize".
For example -DCMAKE_CONFIGURATION_TYPES="Release;Debug".
The first configuration is the 'default' configuration which is
built when calling ninja with no arguments.
To build all targets of a certain configuration use "ninja all:Release"
or "ninja all:Debug".
To build all targets in all configurations use "ninja all:all".
Note that the first configuration influences which configuration of
tools will be used when building the libraries for all configurations.
In simple terms, when configured with
-DCMAKE_CONFIGURATION_TYPES="Release;Debug" the release version of moc
is used by AUTOMOC.
When configured with -DCMAKE_CONFIGURATION_TYPES="Debug;Release"
the debug version of moc is used by AUTOMOC.
Framework builds and Ninja Multi-Config don't currently work together
due to multiple bugs in CMake, which ends up generating an invalid ninja
file with duplicate rules. There are also issues with placement of the
debug artifacts.
This will be handled in a follow up patch after CMake is fixed.
Task-number: QTBUG-76899
Change-Id: If224adc0b71b7d1d6606738101536146aa866cd7
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Previously repo/tests/CMakeLists.txt was a standalone project on which
CMake could be called. This was useful for Coin to be able to build
and package only tests, but was a bit troublesome because that means
having to specify the usual boilerplate like minimum CMake version,
which packages to find in every tests.pro project.
Instead of having a separate standalone project, modify the top level
project and associated CMake code to allow passing a special
QT_BUILD_STANDALONE_TESTS variable, which causes the top level project
to build only tests, and find Qt in the previously installed qt
location.
This also means that when building a repo, we generate a
${repo_name}TestsConfig.cmake file which does find_package on all the
modules that have been built as part of that repo. So that when
standalone tests bare built for that repo, the modules are
automatically found.
qt_set_up_standalone_tests_build() is modified to be a no-op because
it is not needed anymore. Its usage should be removed from all the
other repos, and then removed from qtbase.
Non-adjusted tests/CMakeLists.txt projects in other repositories
should still be buildable with the current code, until they are updated
to the new format.
Adjust the Coin build instructions to build the standalone tests in a
separate directory.
Adjust pro2cmake to generate new structure for the tests/tests.pro
projects.
Adjust the qtbase tests project.
Fixes: QTBUG-79239
Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Equals_value check that if the property is same as given value.
Equals_property compares properties in this case the OS of target and host.
Change-Id: Ica42f0f99562911a97d2f6bd02bd8a6420c980ac
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: I3906a08f5e0cce9abeeafbb67a83d31fbf67c703
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There are things that could be shared around all Qt submodules. In particular
compiler specific configuration should not be repeated over and over.
The new file can be included directly from all modules that uses QtBase.
In longer term one would have a separate repository for such instructions as
most of them are not QtBase specific.
Change-Id: I0590b2a0c78b73e1b9dbb27cc1da6568cbe56563
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We do not need to print the whole cmake configuration anymore.
Change-Id: I429e06f65258d0be0cf8b7c90e81c0593718e48c
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Qt CMake Build Bot
We should check if configureArgs has "-DBUILD_SHARED_LIBS=OFF", that means
"contains_value" not "in_values".
Change-Id: I6c0c3ac695fa439c68f3027e70adc389f6fb27c1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
MODULE_ARTIFACTS_RELATIVE_STORAGE_PATH was pointing to a build
artifact, instead of a path to a successful item.
Change-Id: I01490e63e70beae2f613cda5451a9e2ddb5451fa
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We do not run the test in such configuration. In theory the build
should success (it doesn't for now) but it creates a lot of data.
So the coverage gain vs cost ratio is not great.
This workaround aims to unblock cmake builds.
Change-Id: Icd730d88bf800ee2e7764704a92238ec147d47f9
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
We do not need or should to define these variables in the product
configuration file. It should be enough to just have the compiler
name.
Change-Id: I797958a2c35641f1b79e4e74f3feb49312f8b9c4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The resulting test artifacts are way to huge to upload.
Change-Id: I6df1f1c4bdb0fe2cfb7f7baed8999a1ee24b879e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The module yaml file provides the instruction for creating and upload
the test artifacts, it might as well provide the instruction for
downloading it. Coin sets the corresponding environment variable for the
storage path now.
Change-Id: I4aabe60e28c0c1a6d5934b3b7b797835a793a7fe
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
As an initial way this allows running tests. Coin does not yet collect
the results and the logic for re-running is inside ctest.
Change-Id: Ieab619d5f8f4ebdd8cd1293489db36d0bbd7c74a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
We don't need the full cmake invocation as when configuring, instead we
can use the qt-cmake wrapper script that uses the generated toolchain
file.
Change-Id: Ie0d554fbf8543d950112108d6a3f8a7c3a58a6a6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Remove dummy test instructions that don't work right now and cause
failures.
Change-Id: I30195fe605419a8eb462e8315f71718dd86df412
Reviewed-by: Liang Qi <liang.qi@qt.io>
