QTextControl's word selection will only include a word if the cursor
position is past the mid point of the word. This can make it
difficult to select words near the edges of the screen on touch
devices. For the TextEdit word selection mode select a word ignore
the relative position within a word.
Task-number: QT-5206
Change-Id: I4e5675596cd89934b3c2bc5d825088887c222fe8
Reviewed-by: Martin Jones
Reviewed-on: http://codereview.qt.nokia.com/4166
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
Unmask the last character typed, not the last character in the string.
Change-Id: I9c70d2347bf878c18ab0a7f4ea76f755ca19a85c
Task-number: QTBUG-17003
Reviewed-by: Alan Alpert
(cherry picked from commit b98e9e69dd8ba33d5f01b9518d95b63b86c4b443)
Reviewed-on: http://codereview.qt.nokia.com/4165
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
Task-number: QTBUG-19109
Reviewed-by: Martin Jones
Change-Id: I709427fe73b2d6ed9e3526af140b9dc375740789
Reviewed-on: http://codereview.qt.nokia.com/4164
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
Many applications relied on the undefined behaviour that the
filesystem engines returned clean paths (despite the documentation
stating that they may not), and consequently suffered regressions with
Qt 4.8.
Unix paths are once again cleaned if necessary.
Windows/Symbian paths were already cleaned, but now use the utility
function to check if a path is dirty, to avoid duplicated code.
Task-number: QTBUG-19995
Change-Id: If8c18469f149291c9d079ae3da23bc2087bbd49a
Reviewed-on: http://codereview.qt.nokia.com/4154
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
use an inlined version of isValid() everywhere;
don't detach where is non required;
get rid of extra checks where possible
Change-Id: I6815c1f7d7c03677d9c57dda2731ed2868ea92aa
Merge-request: 1343
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/4144
... to reduce the possibility of blacklisting valid certificates that
happen to have the same serial number as a blacklisted one, which is
unlikely, but possible.
Reviewed-by: Richard J. Moore <rich@kde.org>
(cherry picked from commit 6b1a8129623e3716f2fc075608b260ce7c381fe2
and adapted to the source incompatible change)
Change-Id: If714c34f6ce028032eee6d68f34d088b6ad5a0cc
Reviewed-on: http://codereview.qt.nokia.com/3895
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
The build-key is an old mechanism to work around binary
incompatibilities in GCC 3.x versions. Modern GCC has not broken binary
compatibility since 3.4, making this mechanism obsolete.
The cache value stored now only includes Qt version, the debug/release
boolean, and the last modified time for the plugin. Old 4-value keys
will be replaced with new keys as the plugins are reloaded the first
time.
This also removes QLibraryInfo::buildKey(), which is a source-incompatible
change.
The UNIX and Windows configure tools have been updated to stop
outputting the QT_BUILD_KEY preprocessor directive.
See also:
http://lists.qt.nokia.com/pipermail/qt5-feedback/2011-August/000892.html
Change-Id: I7d06969a370d3d2c6de413c1230d9d6789cbf195
Reviewed-on: http://codereview.qt.nokia.com/3977
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
All this API is "new" since 5.0.
Change-Id: I7ba1718a4a24eac00ccc4db1646200e9544ee5a4
Reviewed-on: http://codereview.qt.nokia.com/4131
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
QDir::operator== was creating a clean absolute path for comparison
purposes if the original path was relative.
However original absolute paths were trusted, even though they could
be unclean. Now they are checked for cleanliness first.
Task-Number: QTBUG-19995
Task-Number: QTBUG-20495
Change-Id: I047a1a40ae5151e4604085e4ac87f30a4e4979c4
Reviewed-on: http://codereview.qt.nokia.com/4099
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
Also export two symbols for auto tests since opaque keys
need EVP_PKEY * created by openssl.
Change-Id: Ib7801ddfceb259de7291bfaa5940df87f68af97d
Merge-request: 48
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/4011
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Remove one of the circular dependencies between QPlainTestLogger and
QTestLog by directly checking whether we're writing to stdout rather
than inferring the same by examining whether the output file name is
null.
Change-Id: I798288482c9e2e071e17a8622e8a8f8d5016dc7e
Reviewed-on: http://codereview.qt.nokia.com/4052
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This doesn't make sense, none of the other benchmarks do it, and it
breaks compilation for a release-only mac build.
Change-Id: I3bc73f670688d413afcae7fa88bab19f7b3dac33
Reviewed-on: http://codereview.qt.nokia.com/4017
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This appears to serve no purpose.
It was probably copy-pasted from assert.pro.
Change-Id: Ie3d9605b969ee11f2d64c1ac3e480e9efb862a3c
Reviewed-on: http://codereview.qt.nokia.com/4016
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test intentionally crashes itself by using Q_ASSERT.
Since Q_ASSERT is a no-op in release builds, the .pro file was
attempting to always force debug mode for this project.
However, on platforms where debug vs release affect linkage (e.g. mac
and windows), this is invalid. On these platforms, debug mode can't be
enabled unless debug versions of the Qt libraries are available, which
they are not if Qt is configured with `-no-debug-and-release -release'.
Use a different method to ensure that Q_ASSERT really asserts, for both
debug and release builds.
Change-Id: I13eea2c72c77a0a981850dbcaa77f65f147c8490
Reviewed-on: http://codereview.qt.nokia.com/4015
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This is a workaround for QTBUG-21224.
For v8 we want to use QT_ARCH as the primary variable for
detecting the target platform. Unfortunately, QT_ARCH isn't
set when v8.pro is parsed using fromfile() from within
another .pro file (namely src/src.pro).
qt_config seems to be the bare minimum that's needed to get
qconfig.pri (which sets QT_ARCH and friends) loaded.
Change-Id: Ideb713724b98dd100560eaf6d7be39df9a22a71e
Reviewed-on: http://codereview.qt.nokia.com/4094
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
http://www.unicode.org/reports/tr15/#Guaranteeing_Process_Stability:
> handle any code points that were not defined in the earlier version
> as if they were unassigned: such code points will not decompose or compose,
> and their Canonical_Combining_Class value will be zero.
since QChar::Unicode_Unassigned value is 0, it's less than any other
QChar::UnicodeVersion value and must ba handled explicitly
Change-Id: I6df025b4173d407660adae77ec5eeb98d15cb8ce
Reviewed-on: http://codereview.qt.nokia.com/4084
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Declarative no longer used QtScript, it uses V8.
This check in the configure script was stale.
Change-Id: I3c598c0343fc421fdd191a256e07eaa6f4e80058
Reviewed-on: http://codereview.qt.nokia.com/4077
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
When v8 is enabled, QT_CONFIG contains "v8".
There is no "no-v8", meaning that v8 was built
regardless.
Change-Id: I66740b23e5f7cae80740576ea0f13c3ad2f9ad40
Reviewed-on: http://codereview.qt.nokia.com/4073
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
As the comment suggests, renaming this function avoids confusion with
libc's free().
Change-Id: Ia077b92c947d81ef9d78de940a1cd8ed022edb3c
Reviewed-on: http://codereview.qt.nokia.com/4063
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This commit removed the function implementations, but not the
declarations.
This removes QListData::append2(T) but moves the optimized
QListData::append2(T) implementation to QListData::append(T)
Change-Id: I39b6dea31420a7cefe079b94a91a96eb16000d2a
Reviewed-on: http://codereview.qt.nokia.com/4062
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Rename the default accessors for positions to localPos, windowPos
and screenPos, to be explicit about their use.
Introduce a QT_NO_INTEGER_EVENT_COORDINATES define so one can make sure
to always use the float based coordinates.
Fixup all Qt code to use the correct constructor that specifies all
three coordinates.
Change-Id: If4bb93b8d1e2eb2440260d99680c468706cfe68f
Reviewed-on: http://codereview.qt.nokia.com/4058
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
The "force framework/no-framework" logic does not
really work, since Qt is now a mix of frameworks
and statics libs. Remove this code path and use
the "detection" path instead.
Also remove the exports from platformsupport.
Change-Id: I0a308666480445eb47c4f443ff7529addecad10d
Reviewed-on: http://codereview.qt.nokia.com/3464
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Added Test for qmetaproperty
Marked QSocketNotifier Autotest as insignificant. See QTBUG-21204
Marked qtranslator Autotest as insignificant. See QTBUG-21125
Marked corelib/io/qfile/largefile as insignificant. See QTBUG-21175
Task-number: QTBUG-21066
Change-Id: I2a7f6587845c355091bb07c8dd3d1557d16db0be
Reviewed-on: http://codereview.qt.nokia.com/3598
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
uilib includes QtGui and QtWidgets headers, so should explicitly add gui
and widgets in the .pri file.
Change-Id: I5f1e80d1379cb5389287df73d6070fd8ff712a3b
Reviewed-on: http://codereview.qt.nokia.com/4055
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This class is never constructed with the parameter defaulted.
Change-Id: If9c3f6562da1e48635a9cf5332bee7e9641255fa
Reviewed-on: http://codereview.qt.nokia.com/4021
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The name of function handleExposeEvent has not changed.
Change-Id: Ida4621bbf988088c0a75f1c93a3332702f0d92b7
Reviewed-on: http://codereview.qt.nokia.com/4037
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
By not waiting until deleteLater() kicks in it's easier to auto-test. We
can now add a test case for what happens when a shared resource is still
valid while the last context is destroyed.
Change-Id: I72963928e6a921e49ed59a79e2579b497ba37ccf
Reviewed-on: http://codereview.qt.nokia.com/3732
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Qt modules with config tests generate a module level .qmake.cache with
the results of the config tests. The existance of this file prevents
qmake from walking up the directory tree and finding the Qt global
cache file. This results in the system build not working as expected.
For example running 'make' in the module would only build the contents
of src and skip tests and examples.
Fixed by adding a include statement to the end of the config test
generated .qmake.cache.
Change-Id: I68a5f2a96f4ee02076b6457ae085f45d894cd4ed
Reviewed-on: http://codereview.qt.nokia.com/3830
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
Collapse the QTestBasicStreamer class into QTestXunitStreamer.
Change-Id: I349b8db432fd45f9352084f60b36b460f3b61f6a
Reviewed-on: http://codereview.qt.nokia.com/3925
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Both the old and new XML loggers produce the Complete and Light XML log
formats, while only the new logger produces Xunit XML logs. The
disadvantage of the new logger is that it is more complex and doesn't
produce a partial log if the test fails to terminate gracefully. This
behaviour arises because Xunit format output cannot be written correctly
until all tests have been executed.
This commit removes the Complete and Light XML formats from the new
logger, using the old logger to produce those formats and the new logger
to produce only Xunit XML. Prior to this commit, the qtestlib selftests
demonstrate that the old and new loggers produce identical output for
Complete and Light XML.
This commit also removes the undocumented -flush command-line option,
which was used rather obscurely to select between the old and new
loggers.
The newer logger will be renamed to QXunitTestLogger in a subsequent
commit.
Change-Id: Id304f5b411bdd520409ee233f6bc34e8917942ab
Reviewed-on: http://codereview.qt.nokia.com/3923
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
