And move the actual implementation from corelib/io to network/kernel
sub-module.
Fixes: QTBUG-80308
Change-Id: I554b05bae3552c68e1e1a405c169366ee19120b2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This also fix the normalization algorithm:
- Some 'const' after pointers were not removed as they should.
- No need to keep the space in '> >' and '< :' in C++11 anymore
- Fix normalization of 'long unsigned int' and similar
Change-Id: I2b72f0fede96c1063e7b155d9f25a85fccfc7bf9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
the QMetaType is represented as a pointer to a "vtable" in the form of
a QtPrivate::QMetaTypeInterface*
The recomanded use of QMetaType is to construct an object with
QMetaType::fromType. This does not require any registration.
There is still an id() function which will do some registration
for compatibility with Qt5. Also the patch does not really touch
the other extra things that can be registered (data stream operator,
comparison operator, iteratable, ...) and this still uses the previous
system.
This is only the change in QMetaType, other changes to use it in QVariant
and QMetaObject will follow
Change-Id: Iffad20085cf33f33447f58a68236013a8b60fdbf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Goes through the Qt code and make sure bytes-per-line calculations are
safe when they are too big for 32bit integers.
Change-Id: I88b2d74b3da82e91407d316aa932a4a37587c0cf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It is not possible to exclude targets based on the build configuration
in CMake. loadDebugPlugin() and loadReleasePlugin() will always fail as
both debug and release plugins are built regardless of the build
configuration.
This patch adds the CMAKE_BUILD define and skips the opposite test on
Windows. E.g.: With config = Debug, the loadReleasePlugin() test is
skipped and viceversa.
Change-Id: I2659882604bb39eb11d3e9e2b2b37a2972475285
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make the order of visible, group and enabled insignificant, by storing
ignored explicit values of enabled.
Also adds resetEnabled method QQuickAction has on the enabled property.
Change-Id: I9299dec0d1f74fdf655721bb4f72ba565ae85c7a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
QLinkedList has been moved to Qt5Compat. Remove and stop mentioning
it in docs, examples (the docs & examples for QLinkedList itself will
be moved to Qt5Compat) and remove the corresponding tests.
Also remove QT_NO_LINKED_LIST, since it's not needed anymore.
Task-number: QTBUG-81630
Task-number: QTBUG-80312
Change-Id: I4a8f1105cb60aa87e7fd67e901ec1a27c489aa31
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Same pattern as QtQuickWidgets. Gets rid of QtOpenGL's dependency on QtWidgets.
Task-number: QTBUG-74409
Change-Id: I4f9b55c23e25a1e0519734037b768a16e870c7d2
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Extract the character in its proper unicode form and encode it in a
new single_character_data table of locale data. Record each entry as
the range within that table that encodes it. Also added an assertion
in the generator script to check that the digits CLDR gives us are a
contiguous sequence in increasing order, as has been assumed by the
C++ code for some time. Lots of number-formatting code now has to take
account of how wide the digits are.
This leaves nowhere for updateSystemPrivate() to record values read
from sys_locale->query(), so we must always consult that function when
accessing these members of the systemData() object. Various internal
users of these single-character fields need the system-or-CLDR value
rather than the raw CLDR value, so move QLocalePrivate's methods to
supply them down to QLocaleData and ensure they check for system
values, where appropriate first.
This allows us to finally support the Chakma language and script, for
whose number system UTF-16 needs surrogate pairs.
Costs 10.8 kB in added data, much of it due to adding two new locales
that need surrogates to represent digits.
[ChangeLog][QtCore][QLocale] Various QLocale methods that returned
single QChar values now return QString values to accommodate those
locales which need a surrogate pair to represent the (single
character) return value.
Fixes: QTBUG-69324
Fixes: QTBUG-81053
Change-Id: I481722d6f5ee266164f09031679a851dfa6e7839
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If necessary, the feature still can be enabled with -feature-ftp.
Task-number: QTBUG-80339
Change-Id: I7dafaad254d1396f24ac5c339d55c3bedfa97f1c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Remove the compat SQL plugin names (QMYSQL3, QOCI8, QODBC3, QPSQL7)
since they are not needed and just confuse the user
[ChangeLog][QtSql] The compat plugin names QMYSQL3, QOCI8, QODBC3 and
QPSQL7 are no longer available.
Change-Id: I6d88f449ef3e18881a6970fb374ba0ab074ef302
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
We observe this happening on macOS in the CI system, and it might happen
if a VM doesn't get CPU cycles for long enough time so that two timers
time out. Then event processing will process two timer events, and we
overwrite the timerIdFromEvent with the second event.
Instead, skip the test when this happens.
This is an ammendment to 5c520f4b0a
Change-Id: Ibc1169b5458c8dce9d4fe9ce715f49c396e17b86
Fixes: QTBUG-71751
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
...and merge the two overloads of getDouble() in Qt6
Change-Id: I55faa2ff222b41e48889a0ef14dd00a6da691c36
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We added a work-around to disable the test when the Waree Book
font was not available, but this also excludes perfectly valid
versions of the font, so it is a bit unfortunate.
Change-Id: Ibeeff78d87acc384c1aa1b01e988edd524c60575
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Make the test operate in its own temporary directory, so that entries
left behind by other test functions don't impact this test.
Also, call QFileSystemModel::sort explicitly; it would otherwise only
be done once through a single-shot timer, and the test processes events
until the model is populated, which might not process that delayed
sorting. Since dirsBeforeFiles tests the sorting algorithm and not
the sorting logic, best to do this explicitly.
In case of sort failure, print diagnostics.
Change-Id: I44c2b82ef1330cc8787aed2b5cbf109ef3a67876
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fixes: QTBUG-75452
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This reverts commit 0de6c26ac1.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I67dbb5cada25da473bdd02e71b1e2d9bd03f039e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The following signals have been removed:
- void activated(const QString &);
- void highlighted(const QString &);
Task-number: QTBUG-81845
Change-Id: I61b552d9258987d4252202953aaf4909f9bd718e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
This allows for instance to show the current UI language in the UI,
or to load additional translations that match the .qm file by other
means.
This is especially useful in the case of QTranslator::load(QLocale(),
...), in which case different language and country combinations might
be tried.
Another option is to inspect the file name via QTranslator::filePath();
however, this is more error-prone, and might also miss information
(if the .qm file name doesn't have a country suffix, or no suffix at
all).
Change-Id: I6f565d53d8f50e21241ccae6c4de264747ac8f81
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some Qt classes already accept std::chrono durations in their methods
(see, for example, QTimer). The proposed change adds an overload
with std::chrono::milliseconds to QStateMachine::postDelayedEvent().
Change-Id: I360fd2bb54fedc7415e9ec17e096095be3604d41
Reviewed-by: Erik Verbruggen <erik.verbruggen@me.com>
There were a few surprises:
- QByteArray::compare() are missing noexcept (will add)
- ibid., called with non-ascii content and CaseInsensitive fails
(this was discussed on the ML, with tentative agreement that
it's a feature, not a bug; waiting for QUtf8String(View) for a
fix, then).
- As was the case when we did this exercise with the relational
operators, QString(Ref)/QChar is not noexcept (will fix)
These have been QEXPECT_FAIL'ed.
Not much of the cartesian product is implemented at all, yet. These
have been #ifdef'ed with NOT_YET_IMPLEMENTED to see what's still
missing.
Change-Id: I7d9b21e292b98f980aacdc6248e88188f7472ba2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I55cb9a6b3aebac68fb1b20127ba7aa501b4a3f2b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Various compilers have various fun ways of failing to compile when it
is used so let's check if they will work properly during configure
rather than much later.
Change-Id: Ia93d4b91b3d269b4cab2a5f677c3c89e06b44ce3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As we want Qt's own revisions to follow the Qt versioning scheme, we
need to allow for the minor version to reset to 0 now. In order to
facilitate this, we interpret the argument passed the current Q_REVISION
macro as major version and allow for an optional minor version. Both are
encoded it into the resulting revision number.
Change-Id: I3519fe20233d473f34a24ec9589d045cdd162a12
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remove temporarily the reference returned by QTransform::toAffine()
since we don't keep the QMatrix object internally anymore.
This is done in order to compile the rest of the code.
The follow-up patch is going to remove that method completely.
Task-number: QTBUG-81628
Change-Id: If7140eedb7582d81ac8da529017cf792174e86ab
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The unspecified segment is between 0 and 1. This is because
QTypeRevision::zero(), as the default revisision needs to be smaller
than any other. At the same time we want explicitly specified non-zero
revisions to be larger than unspecified ones. Breaking this down on a
per segment level gives us the order shown here.
Change-Id: I1cca12f1180eb6f77563fb5b22c3400e118dc5e9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Moving a file to the trash should preferably done via IFileOperation.
However, the implementation on Windows 7 ignores the operation flags
that request the shell not to show any confirmation dialogs or other UI
elements.
SHFileOperation is an old API that doesn't show any UI, but has the
limitation that it doesn't report the location of the file in the trash
after the move. So an application cannot restore the file, but the user
can do so via Explorer.
Overall, the better compromise is to not have dialogs at the expense of
not being able to report the new path. This allows us to run the unit
test on Windows 7 as well.
Change-Id: Ib8e651a69e2c6750f668b52d2a70925d156cc8ae
Fixes: QTBUG-81927
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
bind on port 1/82 is now success, in QTcpSocket's test things are more
broken: changing the test row makes the test flaky with port not available
due to the previous test case.
Task-number: QTBUG-81905
Change-Id: Iaf1b5457fa3961a4f6bc92b79aa4668a8359136e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
