QAuthenticator used it for the convinience of QHttpSocketEngine only.
QHttpSocketEngine has now been ported to use QHttpNetworkReply to parse
HTTP responses.
Change-Id: Idf6e70aa76613aad6e3d789d81ca1b4fd73575c2
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
It was added only to maintain source compatibility with Qt Mobility.
Change-Id: Iea8d40e401bd1f8d5115268e09b256eacca69ea0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Modified exceptions as most tests are now passing correctly. Three exceptions
still remain, two serverSideMode tests (ssl3-any, tls1.0-any) and a
verifyMode test.
Task-number: QTBUG-23575
Change-Id: I847e8c2e3484050b8d07ede9aec955c30f7ef5a1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test hardcodes IP address / hostname pairs to be used for forward
and reverse lookups.
The reverse DNS entry for 62.70.27.69 has recently disappeared. Replace
it with an IP / name pair which is (hopefully) much less likely to
disappear.
Change-Id: I03f589e1c0f4bde0b1a14e94b3c1047eeb81246e
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This is a fix for problems introduced by bf7f170.
Change-Id: If5dd8e031ef2efea578b3efb188c2e950e1ba41a
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QNetworkCookie doesn't need to know about QNetworkCookieJar and for
QNetworkCookieJar header a forward declared QNetworkCookie is enough.
Change-Id: I21145ce0f67a0a6bd68a46a5e757f82105cdf520
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
All references to QFtp in documentation have been removed, QFtp's
documentaiton was marked internal. The QFtp example was removed.
Task-number: QTBUG-23199
Change-Id: Ifff83cac069fb350e8ebeae63e605850e65c0c30
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Numerous failures in the qsslsocket autotest suite relating to
connections without using proxies. Some have been skipped due to
the number of failures, other more specific tests have been set
to expect a failure.
Task-number: QTBUG-23575
Change-Id: I35fccc65bcab303646617a57a33f5aa7f7a4323f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
It was checked in a few places, but it didn't actually remove QTextStream,
so it was pretty useless.
Change-Id: I8eaf28893cd6c7acbe1c0b69d58de90742aee755
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Introduce QTRY_VERIFY_WITH_TIMEOUT and QTRY_COMPARE_WITH_TIMEOUT
to be able to specify a timeout value.
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Change-Id: Iaeaa4938eb14f2c431537055f626510cba183ce3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The custom QTRY_VERIFY macro is needed since the one provided by testlib does
not support custom timeout.
Change-Id: I12bbc5efcb16c4f53514ad738d6115d217a55b05
Reviewed-by: Alex <alex.blasche@nokia.com>
It's only used by Maemo and Harmattan, thus not needed in Qt5.
Change-Id: I8638f4fc63637be88d1aa584cde7e3a4116f2de6
Reviewed-by: Alex <alex.blasche@nokia.com>
QHttpNetworkReply crashed in Qt4.7 and 4.8 if a HTTP server responded with
gzip-encoded empty content without defining Content-Length in the response
header. This commit adds the test for the problem as a regression test to
Qt5.
Change-Id: Iddfb970a31d92a66fd1dd524811cf54bb06e5157
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Windows x64 uses 64 bits integer for sockets, to ensure compatibility we
should use ptr sized integers for our socket descriptors.
Task-number: QTBUG-19004
Change-Id: I4b56023874a4f1bad107c66c054fecfedde33d88
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These tests used requires(contains(QT_CONFIG,private_tests)) in their
.pro file, but did not subtract themselves from their parent project
SUBDIRS when private_tests weren't enabled.
In the best case, this wastes a little time as qmake iterates over these
projects which won't be built. In some worse esoteric cases, this may
break compilation or packaging.
Change-Id: If36b1b8f69c3509128786fec67899ae18ffaa2bc
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This testcase fails on the Ubuntu 11.10 x64 platform, add flag to .pro
file so test is ignored on this platform.
Task-number: QTBUG-23380
Change-Id: I51831df8c8e9bfcf63d3689e37552ca1a62691cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The data file named "trolltech" has nothing specific to Trolltech in its
contents. Rename it to "testhtml". The lack of a file extension is
intentional.
Task-number: QTBUG-19653
Change-Id: Idc5c5f4ffa447151e47f66ff7364f0fa8753a699
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is a regression caused by the NTLMv2 authentication patch.
I have manually tested NTLMv2 authentication against MS IIS and reverting
these two lines does not break it.
Task-number: QT-5209
Change-Id: I64159cbe468e1a7f834f8726fd0c9d4ab4c54b38
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Test the authentication cache works properly with "cancelled dialogs"
or if the user enters username/password incorrectly.
Expected behaviour is based on web browsers:
If cancelled, current request fails, and prompt again the next time.
If wrong password is given, prompt again and retry the current request.
If bad credentials are in the cache, prompt again
Task-number: QTBUG-22875
Change-Id: Ic02ccac8dbeb3f2580ca4ffe47d0773982c4ab25
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
The "happy eyeballs" connection code means that IPv4 and IPv6 connections
are both attempted for a http request.
For a normal http server, this is no problem, but the MiniHttpServer in
the test code is very simplistic and cannot cope with more than one
client connected at the same time.
On windows this causes all these tests to fail with timeouts.
Changed the MiniHttpServer to listen on IPv4 only instead of Any address.
Change-Id: I81e249997d894d266001da474a351b1f5642599e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMessageBox was being used to test nested event loops. This has been
changed to use QEventLoop directly.
Also, there was an unnecessary use of QPushButton to trigger a test
case, which has been removed.
As a result, 3 test cases can be run on VXWORKS, and one more test case
on Windows that were previously skipped.
Change-Id: Ic65ed441cd37d242f89df3ef3b8638a1458d9cf3
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
tst_QTcpSocket::disconnectWhileLookingUp required the host lookup +
connect + disconnect procedure to complete in <50ms, which is not always
true.
When disconnecting (rather than aborting with close()), wait for the
disconnection to complete with a timeout of 5 seconds.
Task-number: QTBUG-21043
Change-Id: I3b59abf9a8eb2c6d99416e1a8ec6b528885b656e
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
setSocketDescriptor fails because socket is in the wrong state.
This is timing dependent, if qt-test-server is still in the DNS cache
then the test failed.
- clear the DNS cache to avoid the host lookup state being skipped.
Change-Id: If159d514b1aa9b62a4834f6352d5e7b0a00a5724
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
The docs say this is required, but we don't check it and instead
segfault right now.
Change-Id: I825b00a312a481c5383af127333c0c4698188348
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
bind() test failed if there is an autoconfigured IPv4 address.
e.g. bluetooth adaptor that is not attached to a network.
Or WLAN adaptor in peer-peer mode.
- solved by skipping the autoconfigured IPv4 addresses in the same way
as IPv6 addresses are already skipped
bind() test fails for proxy
- skipped, QTBUG-22964 created
Change-Id: I9a799ae8db421783f474e97cf876d6e265516397
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When listening on QHostAddress::Any, serverAddress() should return
QHostAddress::Any too, assuming that setting the socket options
was successful.
Task-number: QTBUG-22899
Change-Id: I50a9ff1b4ad0c1c1905e2952c595d7068df2627d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QHostAddress(QHostAddress::Any) was not equal to QHostAddress::Any
because only one of the operator== overloads was handling this.
Task-number: QTBUG-22898
Change-Id: Ifd36947a50e8c36362b4e850fd8d5105ee0925ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Centralise the specification of the default ssloptions to make the code
clearer and more testable.
Change-Id: I4f4bae72736dd063ee4cd64c6375e82d0600a105
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Some of Qt's autotests depend on access to a test server. For each test
that used the test server, tests/auto/network-settings.h created a
global object to verify at startup that host lookups to the test server
will succeed (and abort the test otherwise).
There are two problems with that approach:
First, the sanity check happens before main(), and thus before the test
framework has started logging test results. This means that if the
sanity check aborts the test, the failure message will not be visible in
the test output if logging to a file or will cause the output to be
malformed if logging to the console in XML format.
Second, since Qt 4.7, the host lookup uses a class that connects to the
QCoreApplication instance, which doesn't exist before main(), and this
caused all tests that included network-settings.h to output an error
message from QObject::connect() at the beginning of the test.
Both of these problems are solved by removing the global object from
network-settings.h and instead performing the sanity check in the
initTestCase() function of each test.
Task-number: QTBUG-22876
Change-Id: Id49c1826906327bf571686cc11527f0265e5af44
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Cast enum to int so that we get the actual and expected values in the
failure message, rather than merely "Compared values are not the same".
Change-Id: Idc20e050c2e8a07d70f839c0a45044b070c0900e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
SSLv2 may be disabled in openssl at compile time.
If so, do not attempt to test it.
Change-Id: I189c8fde5b5dc8e739d54cc1adde1d3e3e217391
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The handling of QSslOptions is complicated not only by the subject, but
also by the fact that some of the openssl directives are negatives. This
commit tries to separate the inherent complexity from the complexity of
the api by allowing us to test them independently.
Change-Id: Ieb9386c69dd9b0b49dc42e26b2878a301f26ded1
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
This is a source-incompatible change.
TlsV1 is ambiguous; what is actually meant is TLS version 1.0. There are
also TLS versions 1.1 and 1.2; we might want to add options for these
once OpenSSL supports them (apparently they will be with OpenSSL version
1.0.1).
Change-Id: I940d020b181b5fa528788ef0c3c47e8ef873796a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In Qt 4.x the serial number is reported by a mixture of the hex value
and the number, The hex is what is used by other tools, and we should do
the same.
Change-Id: Ia0361d43fb5b920d053c95e932e0c8a012436e5e
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Currently isValid wrongly gives the impression it checks a certificate
for validity - it doesn't. It merely checks if the certificate dates
are valid and if the certificate is blacklisted. Since it's already
easy for users to check the dates, let's just give them access to the
ability to check for blacklisting.
Change-Id: I25be3bde6a01063034702a9574b28469bf4882cd
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Two problems:
- The signal cacheCredidentials was not connected in the synchronous
case while it must be connected. (Regression when the threaded http
was merged)
- We cannot cache the credidentials when we proceed the url because
at that point, we do not know the realm (this basically reverts
9bc5a32b875b812c3a706034c8c27614f86bd138)
Task-number: QTBUG-18411
Change-Id: I8ea11fa23db4314c3f17ed06d2d7f9ee934ccdba
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Added tests for each of the supported extensions, and also for the
handling of unknown ones.
Change-Id: I29e0a5c1a411f41c2a554293662a33b56f205c00
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit moves qsslsocket_onDemandCertificates_member and
qsslsocket_onDemandCertificates_static from tests/auto/ to
tests/auto/network/ssl/.
Change-Id: I1593e113016ce7bb7dffbee82f1196275784d0ac
Reviewed-by: Holger Ihrig <holger.ihrig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This should be API-compatible with Qt 4, but is not ABI-compatible, due to
removing the enum from QUdpSocket.
Task-number: QTBUG-121
Change-Id: I967968c6cb6f96d3ab1d6300eadd5bde6154b300
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
