Removing a few unused variables in auto tests that were triggering
`-Wunused-but-set-variable`.
Pick-to: 6.5
Change-Id: I74bd0d7335d8bddeb18687b18c8a8be965f9fa20
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QAIM::match() supports different matching modes. The wildcard match mode
was never meant to be specifically a filepath globbing wildcard, but
rather a generic one -- something like "*" should match into a
string like "a/b/c". This is a regression from Qt 5, where
QRegExp::Wildcard was ported to only allow for path globbing
rather than generic matching.
[ChangeLog][QtCore][QAbstractItemModel] QAbstractItemModel::match()
now uses more generic wildcard matches rather than file path globbing.
Please refer to the documentation of
QRegularExpression::wildcardToRegularExpression() for more information
about the differences.
Change-Id: I28b8a76b01fdd9c5dd8f99528fac1c7b704564bc
Fixes: QTBUG-104585
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The value will be propagated from Qt build.
Task-number: QTBUG-104858
Change-Id: Iae2c32c3037438f41b92f9ee28004f30eb4e3210
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The new name describes the behavior in a better way.
[ChangeLog][Build System] The QT_DISABLE_DEPRECATED_BEFORE macro is
renamed to QT_DISABLE_DEPRECATED_UP_TO. The old name is deprecated, but
is still recognized if it is defined during configuration and the new
name is not defined.
Task-number: QTBUG-104944
Change-Id: Ifc34323e0bbd9e3dc2f86c3e80d4d0940ebccbb8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
QAbstractProxyModel::headerData tries to do the "smart" thing and
map sections in the proxy to sections in the source. However there's
no "mapSectionToSource" virtual. Instead, to map horizontal headers, the
code builds a proxy index at row 0 and section N, maps it to the source,
and finds out which source column it gets mapped to. (Same story
for the vertical headers).
... in general this can obviously fail, say you've got a "horizontal
scrambling" proxy model, but in the common case this is OK.
Except, if the proxy is empty (e.g. 0 rows or columns). In this case,
it asks for an illegal index, and if you reimplemented index() yourself
(which you must, since it's a pure virtual in QAPM) and you do bounds
checking, you'll not be pleased at the result.
This turns out to be a massive API liability. To fix this somehow properly,
we can decide that empty models don't get the section remapped (easy).
Less easy is the fact that, when the model does get some data, we have to
emit headerDataChanged() otherwise the views will get broken. So add
this logic too.
Note that QAPM does not normally forward any source model's signal -- a
subclass has to connect to them and handle them explicitly. That's
*another* API liability, all over the place -- data(), headerData(),
flags(), etc.
What I mean by this is that one can create a valid QAPM (by implementing
its pure virtuals) that however is immediately broken by the convenience
that QAPM provides for the rest (data(), headerData(), etc.).
This commit doesn't try and change this in any way, but I'm less and
less convinced of the usefulness of QAPM in its current shape.
Change-Id: I45a8c2139f2c1917ffbf429910fdb92f005f4feb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: David Faure <david.faure@kdab.com>
When creating proxied models, make the source model a QObject child of
the proxy model, so the source isn't leaked when the proxy is deleted.
This drove asan nuts.
Pick-to: 6.3 6.2 5.15
Change-Id: I0f7fc9ab8e99d030c941cfb336ee4e2323b362ae
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This patch installs a QAbstractItemModelTester in the
QSortFilterProxyModel tests.
Change-Id: I9bdcc21ba12f919c91c5b9514a5f4362437318c2
Reviewed-by: David Faure <david.faure@kdab.com>
These long target names can quickly lead to exceeding Windows' max path
length.
Pick-to: 6.2
Change-Id: Ibd77e53464a71221f9302d490afbe9c41c16646d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QAbstractProxyModel::itemData/setItemData should behave
just like data()/setData() instead of calling the
QAbstractItemModel implementation.
Before this change the QAbstractProxyModel implementation
calls its the QAbstractItemModel implementation,
which ends up calling data()/setData() in a loop
bypassing the convenience of itemData/setItemData.
[ChangeLog][QtCore][QAbstractProxyModel] The itemData()
and setItemData() functions will now call the respective
implementations in the source model (after mapping the
index to a source index), matching what data() and
setData() already did.
Before, the proxy model simply called the default
implementations of itemData()/setItemData() in its own
base class (QAbstractItemModel).
Change-Id: I9e680d355f44fa130660dd7e1c8ac37484c1566e
Reviewed-by: David Faure <david.faure@kdab.com>
With the QRegExp variant removed, it was weird to have all QSFPM
tests in "tst_qsortfilterproxymodel_regularexpression", even those
completely unrelated to regexps. Instead of reuniting into a single
executable as before, I simply split it out in separate executables:
* tst_qsortfilterproxymodel has the "standard" QSFPM tests
* tst_qsortfilterproxymodel_regularexpression has the regexp-related tests
* tst_qsortfilterproxymodel_recursive is separate as before
Change-Id: I345530b4352671164008bba4805af7b12ac90247
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
layoutAboutToBeChanged must be called before
persistentIndexList as the user might create persistent indexes
as a response to the signal
Fixes: QTBUG-93466
Pick-to: 6.2 5.15
Change-Id: I73c24501f536ef9b6092c3374821497f0a8f0de4
Reviewed-by: David Faure <david.faure@kdab.com>
In QItemSelectionModel, items which are disabled or marked as not
selectable should not be considered as selected. But this was
not handled consistently.
The following methods considered only items which are enabled and
marked selectable: selectedIndexes(), rowIntersectsSelection(), and
columnIntersectsSelection(). The following methods considered only
items which are marked selectable, but did not check whether they
are enabled: selectedRows(), selectedColumns(), isRowSelected(),
isColumnSelected(), isSelected(). Finally there is hasSelection(),
which did not check for enabled nor for selectable.
This patch introduces consistent behavior. All methods check
both whether the items are enabled and whether they are selectable now.
[ChangeLog][QtCore][QItemSelectionModel][Important Behavior Changes]
All methods in QItemSelectionModel now consider only items which
are marked as enabled and selectable as part of the selection.
Fixes: QTBUG-93829
Pick-to: 6.2
Change-Id: I4725243ea6b0db4f289ce34ada22c7a9d3282713
Reviewed-by: David Faure <david.faure@kdab.com>
Calling create_mapping in setSourceModel as introduced by 8455bfee76
can lead to an early call to filterAcceptsRow, and some existing applications may crash.
It is also an incomplete solution since it was only done for the
toplevel index but not for child indexes.
Instead, go back to creating mappings on demand.
This means coming up with a different fix for QTBUG-87781 (dataChanged
not emitted for indexes that haven't been mapped yet, i.e. not queried
or shown anywhere).
When this happens, we can't know if the index was previously filtered
out or not (for lack of a dataAboutToBeChanged signal...). Creating
the mapping with the new data only gives us the new state of affairs,
there's no reference state to compare to. Therefore, when the mapping
is missing (during dataChanged handling), create it, but skip all the
logic about row insertion/removal, just forward the dataChanged signal
if the row isn't filtered out.
Creating the mapping might require creating first mappings for parents,
recursively, which wasn't done anywhere in QSFPM yet, hence the new
create_mapping_recursive() method.
In addition to all this, the handling of removed items was incorrect,
remove_source_items did nothing if the parent was gone, and then
source_items_removed was trying to adjust indexes in an incorrect list.
If the parent is gone, clear the proxy_to_source list, so there's
nothing to adjust afterwards. This bug actually doesn't happen anymore
in this version of the patch, but the change still seems right and might
prevent repeating a long debugging session in the future.
Thanks to ChunLin Wang for the unittest in this commit.
Done-with: ChunLin Wang
Pick-to: 6.1 6.0 5.15
Change-Id: Id543d0cc98f1a03b5852bda01d2f49b980e06be7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
QItemSelectionModel has the property selectedIndexes with
the notification signal selectionChanged. When a row is deleted
or inserted above the current selection, the row number of the
current selection changes and thus the return value of
selectedIndexes changes. This should trigger its notification
signal.
This signal was not emitted. This patch fixes this and
adds a unit test to verify this.
[ChangeLog][Important Behavior Changes][QtCore]
QItemSelectionModel now emits the selectionChanged signal
if only the indexes of the selected items change.
Fixes: QTBUG-93305
Change-Id: Ia5fb5ca32d658c9c0e1d7093c57cc08a966b9402
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
This takes care of the last two QSFPM properties. They were postponed
because of the tricky relation between them and some bugs in handling
the changes.
The bug was fixed in bcbbbdb2d6 and
now the behavior is well-determined: updating filter regexp does
trigger case sensitivity change and vice versa. However updating
only regexp pattern (via QString overload or setFilterFixedString
or setFilterWildcard) does not change case sensitivity.
Task-number: QTBUG-85520
Change-Id: Idc41cf817de9e6263ed65a80fa40fc8415c8c856
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
filterRegularExpression and filterCaseSensitivity
will be handled in a separate commit
Task-number: QTBUG-85520
Change-Id: I848c5c6cbe8642efa156f4f5d33467976bbf0351
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
The biggest trick here is the getter (QAbstractProxyModel::sourceModel),
which is returning nullptr, while internally using a global
staticEmptyModel() instance.
This lead to inconsistency while binding to a proxy model without
source model. The bound object would point to staticEmptyModel()
instance, while sourceModel() getter returns nullptr.
To solve this issue a custom QBindableInterface is implemented.
Task-number: QTBUG-85520
Change-Id: I597df891c7e425d51b55f50ccbacabdfe935cbac
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
This patch amends bcbbbdb2d6.
It fixes the logic of filterCaseSensitivityChanged signal emission.
The call to QRegularExpression overload of setFilterRegularExpression
could change the filterCaseSensitivity, but the signal was never
emitted.
[ChangeLog][QtCore][QSortFilterProxyModel] A call to QRegularExpression
overload of setFilterRegularExpression now emits a
filterCaseSensitivityChanged signal, if required.
Pick-to: 6.0
Pick-to: 6.1
Change-Id: Id4ef04227c1f8ed98153fa5107ec3fbe4c0c77fb
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The property 'model' is ported to a bindable property.
The properties hasSelection, selection, selectedIndexes,
and currentIndex are left for later patches.
Task-number: QTBUG-85520
Change-Id: Ia424ce99fc80c3d807c634c21d161a3ad94b27d2
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
This patch fixes the breaking of case sensitivity handling. The removal
of QRegExp killed the wrong code paths which leads to inconsistencies
when changing the regular expression throuh methods like
setFilterWildCard or setFilterFixedString. Changing the case sensitivity
also nukes the original options that were set on the regular expression
if it was set through setFilterRegularExpression.
[ChangeLog][QtCore][QSortFilterProxyModel] Case sensitivity as well as
regular expression options handling have been fixed. The original value
is properly kept when using setFilterWildCard and setFilterFixedString.
The regular expression options are now also properly kept when changing
the case senstitivity through setFilterCaseSensitivity.
Fixes: QTBUG-92260
Pick-to: 6.1
Pick-to: 6.0
Change-Id: Ifb4732306f0c7d79ad0b18d3f5437c4523bb40e5
Reviewed-by: Igor Kushnir <igorkuo@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Before calling the index function, we need to check the validity of the parameters.
Fixes: QTBUG-91878
Pick-to: 5.15 6.0 6.1
Change-Id: I9ec7265fff3f81b8a288c4ba8fae606a2ec808a6
Reviewed-by: David Faure <david.faure@kdab.com>
When the source models don't have the same number of columns, the proxy
keeps only the smallest number of columns across all source models.
Afterwards, if a source model emits dataChanged in a column past
that number (a "hidden" column), the proxy needs to ignore it rather than
assert.
But also, if the source model emits a dataChanged signal across both
visible and hidden columns, then the last column number needs to be
adjusted so that the signal is correctly processed and forwarded.
Task-number: QTBUG-91253
Pick-to: 6.1 6.0 5.15
Change-Id: I939e8ec0faf41370472f86785851292e4372f72c
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The test deletes instances of QMimeData in the dropMimeData function.
The compiler warns about deleting objects of incomplete type if QMimeDate
is only forward declared.
Change-Id: I3423a7ea334180ff0b68efbecb3d3feeb0632239
Reviewed-by: David Skoland <david.skoland@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QSortFilterModel shouldn't forward dataChanged() when the source model changes data in columns that the filter model refuses
Fixes: QTBUG-86850
Pick-to: 5.15
Change-Id: I26565d119d2aa36ea07b3de0c15f1b137bc002f8
Reviewed-by: David Faure <david.faure@kdab.com>
The function is unused.
Change-Id: Ib2154398981c0db20a2096c83b371d12920e34ea
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: David Skoland <david.skoland@qt.io>
QSortFilterProxyModel did not emit dataChanged when calling
setSourceModel() after modifying the source model.
QSortFilterProxyModel::setSourceModel and
QSortFilterProxyModelPrivate::_q_sourceReset(), _q_clearMapping
is called to delete the source_index_mapping. They also need to
call create_mapping function to re-create it.
Fixes: QTBUG-87781
Pick-to: 5.15
Change-Id: Idbe34696c9d3a2fbf354b653c870bac61378811d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QChar should not be convertible from any integral type except from
char16_t, short and possibly char (since it's a direct superset).
David provided the perfect example:
if (str == 123) { ~~~ }
compiles, with 123 implicitly converted to QChar (str == "123"
was meant instead). But similarly one can construct other
scenarios where QString(123) gets accidentally used (instead of
QString::number(123)), like QString s; s += 123;.
Add a macro to revert to the implicit constructors, for backwards
compatibility.
The breaks are mostly in tests that "abuse" of integers (arithmetic,
etc.). Maybe it's time for user-defined literals for QChar/QString,
but that is left for another commit.
[ChangeLog][Potentially Source-Incompatible Changes][QChar] QChar
constructors from integral types are now by default explicit.
It is recommended to use explicit conversions, QLatin1Char,
QChar::fromUcs4 instead of implicit conversions. The old behavior
can be restored by defining the QT_IMPLICIT_QCHAR_CONSTRUCTION
macro.
Change-Id: I6175f6ab9bcf1956f6f97ab0c9d9d5aaf777296d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
As advocated in a ### Qt 6 comment.
[ChangeLog][QtCore][QItemSelectionRange] QItemSelectionRange no longer
supports ordering. The prior ordering was inconsistent with equality
and should not be needed.
Task-number: QTBUG-85700
Change-Id: I5eb372c203cae19db40fa67f706d911785652d5f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Ready for removal at Qt 6, as advocated in a ### comment.
It was never done consistently with operator==(), apparently, and
should not be needed in any case.
[ChangeLog][QtCore][QItemSelectionRange] Ordering of
QItemSelectionRange is now deprecated. It was not consistent with
equality and should not be needed.
Task-number: QTBUG-85700
Pick-to: 5.15 5.15.2
Change-Id: Ie99294bd7fc18f2a497598ae08840886b0a6d62d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Views / delegates absolutely *adore* hammering data(). A simple
QListView showing a couple of dozens entries can call data()
a hundred of times on the first show.
Back of the hand calculation,
* 2 times per visible item (sizeHint() + paint()),
* times 9 roles used by the default delegate,
* times 20 visible items
= 360 as a bare minimum, assuming the view doesn't redraw twice
accidentally. Move the mouse over the view, and that'll cause
a full update with certain styles: 360 calls to data() per update.
This has an overhead visible in profilers. The model's data()
has to re-fetch the index from its data structure and extract
the requested field every time.
Also, QVariant is used for the data interexchange,
meaning anything that won't fit in one is also a memory allocation.
This problem will likely be gone in Qt6Variant as that
will store sizeof(void*) * 3, meaning QImage/QPixmap and similar
polymorphic classes will fit in a QVariant now...
So I'm trying to to remove part of that overhead by allowing
views to request all the data they need in one go. For now,
one index a a time.
A view might also store the data returned. The idea is that
the same role on different indexes will _very likely_
return variants of the same type. So a model could move-assign
the data into the variant, avoiding the memory allocation
/deallocation for the variant's private.
This patch:
1) Introduces QModelRoleData as a holder for role+data.
2) Introduces QModelRoleDataSpan as a span over QModelRoleData.
The idea of a span type is twofold. First and foremost, we are
in no position to choose which kind of container a view should
use to store the QModelRoleData objects for a multiData() call;
a span abstracts any contiguous sequence, leaving the view free
to do whatever it wants (statically allocate, use a vector, etc.).
It also solves the problem of efficient passing the roles and
gathering the returned variants from multiData().
3) Add multiData(), which populates a span of roles for a given
model index. The main advantage here is that a model can fetch
all the needed information for a given index just once, then
iterate on the span and provide data for each requested role.
Cf. this with data(), where every call has to re-fetch
the information for the index.
A couple of models have been ported to multiData(), as well as
QStyledItemDelegate.
[ChangeLog][QtCore][QModelRoleData] New class.
[ChangeLog][QtCore][QModelRoleDataSpan] New class.
[ChangeLog][QtCore][QAbstractItemModel] Added the multiData()
function.
Change-Id: Icce0d108ad4e156c9fb05c83ce6df5f58f99f118
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
And remove the old manual registration code for those operators.
Add some special handling for long/ulong, as these types could be
streamed as a QVariant so far, but are not directly streamable
through QDataStream.
[ChangeLog][QtCore][QMetaType] The QMetaType::registerStreamOperators()
and QMetaType::registerDebugStreamOperator() methods have been
removed. The streaming operators for a type are now automatically
registered together with the type registration. This implies that the
operators should be visible wherever the type is visible and being used.
[ChangeLog][Behavior Incompatible Changes] Because the QDataStream and
QDebug serialization operators are automatically registered with
QMetaType, the declarations of those functions must be present at any
point where the type is used with QMetaType and QVariant.
Change-Id: I4a0732651b20319af4a8397ff90b848ca4580d99
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
setFilterRegExp retains the caseSensitivity() while setFilterRegularExpression did not.
Change setFilterRegularExpression to also retain the case sensitivity.
Fixes: QTBUG-83313
Pick-to: 5.15
Change-Id: I46f494d320aee99d50612f01f63558c693276989
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: David Faure <david.faure@kdab.com>
isNull() would forward to the contained type and check that type's
isNull() method for some of the builtin types. Remove that behavior
and only return true in isNull(), if the variant is invalid, doesn't
contain data or contains a null pointer.
In addition, implement more consistent behavior when constructing
a QVariant using the internal API taking a copy from a void *.
isNull() should return true in both cases. This mainly changes behavior
for some corner cases and when using our internal API.
[ChangeLog][Important Behavior Changes] QVariant::isNull()
no longer returns true when the variant contains an object of some
type with an isNull() method, that returns true for the object;
QVariant::isNull() now only returns true when the variant contains
no object or a null pointer.
Change-Id: I3125041c4f8f8618a04aa375aa0a56b19c02dcf5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
