QWidget is polished when show() is called, so unless you do this
first, QWidget::font() will return a default constructed QFont,
and not necessarily the default specified in the platform theme.
Comparing this to QPainter::font() later, which has been resolved
against the platform theme font, and not the default constructed
font, you can get a mismatch and a false test failure. This
happened on Android.
Change-Id: I41ef5b10879bbd4bb8ef8d52ecaccf5e8e894075
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
The testdata needs to be in a qrc to be available on Android.
Note that a single test will still fail. Since this requires
a platform-independent fix, it will be committed separately.
Change-Id: Ib2438a3298d81d77b7f4f240ef045aa0500d8382
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The change 35bc3dc45a moved some padding out
of QTextureGlyphCache into the font engines directly, however this was not
done for the DirectWrite font engine so it caused a buffer overrun.
Task-number: QTBUG-41782
Change-Id: I4e643159036f06c5edd8a742dc6694d517a47826
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
In the list of default implementations, the raster ops added in
ae0ddb8c72 were all offset by one
composition mode because of a duplicate entry in the array. The
effect would be, e.g. that using the NotDestination operator would
resolve to the Set operator instead.
Most users will probably not have experienced this since any of
the asm-based functions will be preferred.
[ChangeLog][Painting] Fixed some very rare cases of mismatched
raster modes in QPainter.
Change-Id: Ia242b54c78acbe1c89d9b4ecd10936564ec134b2
Task-number: QTBUG-41413
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Extend the QImage format with two 8-bit grayscale and alpha formats.
These formats have the advantage over Indexed8 that they have simpler
conversion and can be rendered to by the raster engine.
[ChangeLog][QtGui][QImage] Added support grayscale and alpha 8-bit
formats which can also be rendered to.
Change-Id: I4343c80a92a3dda196aa38d0c3ea251b094fc274
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Adds basic support for 10-bit per color channel formats to QImage
and the XCB plugin. This will make it possible to paint to and from
these formats, but only at 8-bit per color channel accuracy.
This also fixes Qt5 applications on X11 with native 30bit depth.
[ChangeLog][QtGui][QImage] Added support for 10-bit per color channel image formats.
Task-number: QTBUG-25998
Change-Id: I93ccd3c74bfbb0bd94b352476e5fe58a94119e1f
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
It had no effect because of an explicit check for NoBrush.
However the default in QBitmap is (unfortunately) QBrush(color0), rather
than NoBrush, so the brush must be updated when calling setBrush(NoBrush).
I suppose the real issue is that lastBrush is default-constructed in
QRasterPaintEngine, rather than starting with the brush from QPainter,
which is QBrush(color0) for the case of the bitmap. But no reason to
special case NoBrush here anyway.
Task-Number: QTBUG-38781
Change-Id: I9996ac12bf628920cfaf0de9c886f637a336028b
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
The RGBA8888 formats was incorrectly using the qt_gradient_quint32
which is argb specific. This caused vertical gradients but only
vertical gradients to be drawn incorrectly.
This changes the RGBA8888 formats formats to use the generic gradient
method and renames qt_gradient_quint32 to qt_gradient_argb32 to
indicate its limitation.
Change-Id: Ia1cd48ca7f4f78b64f31d6263e81cd8ac3b0954e
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This patch adds tests for the consistent handling of transparent
drawing results on opaque formats that was introduced with commit
6f7d370ade
Change-Id: If5d11d0f2e111ef88490a4dc20a64b0858ad5426
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The compiler complained that the specialization was required
before it was issued. Fixed by moving it up to the others
near the top of the file.
Change-Id: I0ae162a5db5ef29f24cd1d32285a1870fdd24b9b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
These structures do not need to be packed. With some compilers, Q_PACKED
was defined to be empty, which means that the code was working fine
without packing. Or there were some lingering problems on those
platforms (MSVC) and we're now exposing them in all platforms.
Actually, it shouldn't be a problem anywhere. QCharAttributes, quint24
and QFontEngineQPA::Glyph have only char/uchar members, so they're
packed already (they have alignof == 1). The only platform where that
wasn't true was ARM OABI, which we don't support anymore.
QFontEngineQPA::Header seems to always come from a QByteArray, so it
doesn't neeed to be packed either. However, just to be sure, I'm
inserting a check for alignment.
And QFontEngineQPA::Block isn't used anywhere.
Change-Id: Iacfa25edf336ef2a03aeb6e40ae90937a21661ae
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
As of 5.0, this always return true.
Change-Id: If225c7219e283da97e870f0d66a87b21c3cacfc0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The fill color was not correctly converted before being filled into
RGBA8888 images. This patch adds a function with convertion and
adds tests for it to tst_qpainter.
Change-Id: If8b0e6db38b2794a60301842e25f377eb7216796
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Support the byte-ordered RGBA format which is used by OpenGL, and many
endian neutral byte formats.
Task-number: QTBUG-32201
Change-Id: I77cffb4c30c69545fa96ded2f537b2ebd9351acb
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Expanding on the change fixing QTBUG-24762 with the realization that any
line needs to be drawn in a consistent way regardless of system or
painter clip, not just dashed lines.
Task-number: QTBUG-25036
Change-Id: Ief7ef19cc92c52e7d792500a581a072ba032767e
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
We need to clip lines to the unclipped device rect in the case of
dashing, since otherwise the dashes will be shifted and rendered
differently when partial repaints are done.
Task-number: QTBUG-24762
Change-Id: I3599b54baa552acc20bf8cc2e12f846b45f6019e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: I95b8b4b674e85b2b3c374931f6231d60f35be984
Reviewed-by: David Faure <david.faure@kdab.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We need to do bounds comparison on the actual offset we're going to use
with _mm_load_si128 to read 16 bytes from memory (even though we won't
use the trailing bytes in the end).
Task-number: QTBUG-28324
Change-Id: Id0d6094da796ca67338d8ad225fa6b2f309bbe6e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
A 180° rotation results in a TxScale QTransform with negative scaling
factors (x=-1.0 y=-1.0). This is not properly handled by blitter paint
engine yet, so use software rendering fallback in this case.
This rendering issue can be seen when using "-webkit-transform" CSS
property in WebKit with DirectFB QPA platform.
Change-Id: Iee496b6bf0c90ffe36c4235ceaa2c80f296b2ca4
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Use the Qt4CompatiblePainting render hint when painting with QPainter to
treat default constructed QPens as cosmetic still.
The NonCosmeticDefaultPen render hint gets documented as obsolete, since
it was in any case not respected by the raster nor OpenGL paint engine.
Change-Id: I04d910e9700baf7f13a8aac07a3633014bb9283e
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Qt 5 is the time to get rid of all the old inconsistencies in the raster
paint engine caused by trying to preserve the old X11 based
coordinate system where (0, 0) is in the center of the top-left pixel
instead of the upper left corner of said pixel. However, this was only
adhered for line drawing and path / rect filling, and not for image or
pixmap drawing and not at all when doing antialiased painting. By
defining the antialiased coordinate system as being the right one and
letting the aliased fill rules follow from that we finally end up with
some consistent behavior that doesn't lead to surprises and workarounds
in application code.
It is still possible for applications to get the old behavior by
setting the QPainter::Qt4CompatiblePainting render hint. This should
make porting easier for the few cases where an application relies on the
aliased fill rules we used to have in Qt 4.
Task-number: QTBUG-27500
Change-Id: If86b95e77d838ec83033d64af86632b9a73c74a9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This case has typically required specific work-arounds in other
rendering paths as well.
Task-number: QTBUG-25153
Change-Id: I217e710a30222792ebca3bf297e438d944c32992
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
A horizontal line should round up at the same time as a vertical line
with square cap, when rendering at subpixel coordinates. Thus, the
special casing in the cosmetic stroker of offsetting by half a pixel
should be for flat caps instead of for square caps.
Task-number: QTBUG-26013
Change-Id: Ic09249337f814c7de95a17976ec9e651561a744b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Previously QImage::fill() for Format_RGB888 expected a BGR value
instead of the RGB order defined by QRgb, making it counter intuitive to
use related to the 32-bit formats.
Fixed the QPixelLayout data for RGB888 and changed the byte order of
quint24 based on what the optimized image conversion routines expect.
Change-Id: I72926debbc6f5b5cb10b8aa0b2a2a916a04db946
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
removed printsupport tests for wince as there
is no print support on wince and removed the special
handling for wince from 4.8 on some tests as the dependent
modules are not part of qt base anymore
Change-Id: I4ffb22da11f98beee1013f775cb5ce4b936d3211
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Cached font was used regardless of the format, resulting in incorrect
advance in some cases when default format differed from the cached
format.
Task-number: QTBUG-24188
Change-Id: I39e4156bd9ba743afa7e106e934c90227fbf2b8b
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Marked the following tests insignificant due to failures, these need
to be fixed later and then re-enabled:
tst_QPixmap
tst_QClipboard
tst_QWindow
tst_QGuiApplication
tst_QPainter
tst_QPrinterInfo
tst_QPrinter
tst_QOpenGL
tst_QFontDatabse
tst_QFontMetrics
tst_QGlyphRun
tst_QRawFont
Task-number: QTBUG-24128
Change-Id: I39ade8a693c4580b5cd618624e892cdcac21d78c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Change-Id: I6d69ac96597f27575dd40e4c80c982f06fa88f51
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
- Changed to use QFINDTESTDATA and TESTDATA
Change-Id: If75ae2b8e39f6388f4e84ed4aa2681b5a5917e81
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Commit d52fd497f6 introduced a call path to
QPaintEngineEx::drawStaticTextItem, which has a bug in using the pen's color
instead of the entire brush.
This patch replaces the use of the color with the pen's brush().
Task-number: QTBUG-23450
Change-Id: Ieb3bf352c840ff0d3fb4ac678caf7b13f4f9a8f1
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
libstdc++ provides the fenv.h found and for uclibc default toolchains
the bits/c++config.h has _GLIBCXX_HAVE_FENV_H undefined leading to
no import of the uclibc fenv.h
Change-Id: I53173b099f3d8791f527f1ccb60991de57cd19db
Filed: https://bugs.busybox.net/show_bug.cgi?id=4484
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qt_format_text_clip() and qt_format_text_boundingrect() have been
skipped ever since they were originally added to git, so I see no point
in keeping them.
The #if 0 in setEqualClipRegionAndPath() was ifdefed out from when that
specific test case was added (maybe it was failing to begin with?), but
it passes now, so we should enable it.
Change-Id: I6551e3b5612a4d4b00a969511af6abc85db43892
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure.
Change-Id: Ic7fb619081e9ff453769f4064431dc726e90b985
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I97046aa51f1b3fc100e2eb2fa115f1bf8ae6437d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These functions have lived in tests/shared/util.h for a long time, but
they really belong in qtestlib.
Change-Id: I60d569d002dea220b51563931d8b7aa77a20b98b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove the usage of Q_MAC_USE_COCOA and Carbon code paths.
Change-Id: Ib569ad8c6d9ffe258f454b3c3b06e95294a10112
Reviewed-on: http://codereview.qt-project.org/5100
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Sanity-Review: Morten Johan Sørvig <morten.sorvig@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I31e069f5476f8adf9851e94b33c6afac4394b88e
Reviewed-on: http://codereview.qt-project.org/5824
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is in preparation of removing testlib's
dependency on QtGui and QtWidgets.
Autotests that need QtWidgets api must
explicitly include it (since the types are no
longer provided by the QtGui master header).
Autotests that don't need QtGui or QtWidgets
api shouldn't link against those libraries.
Change-Id: I2808289068514fcac582808828ad4634e2631733
Reviewed-on: http://codereview.qt-project.org/5093
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
