QDialog::exec() has a number of problems due to spinning an inner
event loop (to counteract its being synchronous). We've had
QDialog::open() as a better alternative for a long while now,
so encourage people to use that instead.
Change-Id: I51a69a018dcbf6133adb6c2f69c7caf442008b36
Reviewed-by: Martin Smith <martin.smith@qt.io>
Add a scaling overlooked in 63d08003cf.
Task-number: QTBUG-68194
Change-Id: I97c771435e4316ec55aacc527335b62cb4dfd9ec
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
QTableModel::setItemData() did not treat Qt::EditRole and
Qt::DisplayRole as the same. This lead to inconsistencies between
setItemData() and QTableWidgetItem::setData()
[ChangeLog][QtWidgets][QTableWidget] Fix handling of Qt::EditRole and
Qt::DisplayRole in setItemData().
Change-Id: I456f4c8e654de701dcd579236162b8aaa8ba1e53
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Invalid syntax due to missing closing brackets and
exception not being handled when calling .close()
on a stream.
Change-Id: If8f191fbc44fe1b031fd86abff5163bca434156a
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
tst_QProcess hangs sometimes in QEMU. Based on my experiments in a debug VM the
offending test seems to be processesInMultipleThreads(), since that was were I
was able to reproduce the hanging in.
Since the whole test executable hangs, blacklisting is not enough, so skip the
test.
Task-number: QTBUG-67760
Change-Id: I34f8852be955a8612deac22b369f68d79a139d11
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Otherwise using it later is a compile error on ARM if no header including it has
been included before.
Change-Id: I422eeb948da4a22bc3f649daff39740703039372
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The added test case contains the binary JSON equivalent of
["ž"]
with the modification that the string's length has been set to INT_MAX. In
Value::usedStorage this length is used through the pointer d like so
s = sizeof(int) + sizeof(ushort) * qFromLittleEndian(*(int *)d);
Because 2 * INT_MAX is UINT_MAX-1, the expression as a whole evaluates to 2,
which is considered a valid storage size. However, when converting this binary
JSON into ordinary JSON we will attempt to construct a QString of length
INT_MAX.
Fixed by using String::isValid instead of Value::usedStorage. This method
already takes care to avoid the overflow problem. Additionally, I've tried in
this patch to clarify the behavior of Value::isValid a bit by writing it in a
style that is hopefully more amenable to structural induction.
Finally, the test case added in my previous patch had the wrong file extension
and is renamed in this one.
Task-number: QTBUG-61969
Change-Id: I45d891f2467a71d8d105822ef7eb1a73c3efa67a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The macOS, Windows, and XCB implementations are identical
and can be moved to QBasicPlatformVulkanInstance.
Change-Id: Id84b27ffd87f86afe3798c4ad2743ba05e6190d3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The macOS, Windows, and XCB implementations are identical
and can be moved to QBasicPlatformVulkanInstance.
Change-Id: I1380b2bd03080710084a1458bdce3a362ba5c287
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If glibc's <unistd.h> does not define SYS_statx but <linux/stat.h> did
define struct statx and related constants, we failed to compile.
Task-number: QTBUG-68205
Change-Id: I04a43ee94975482f9e32fffd151e66bbe6988554
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Not sure this makes the code faster, but it removes two functions.
Change-Id: I5d0ee9389a794d80983efffd152d830da44b1bfe
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When QMAKE_TARGET_BUNDLE_PREFIX is set in the .pro file then
this value should be used instead of the default value for
PRODUCT_BUNDLE_IDENTIFIER. Therefore, PRODUCT_BUNDLE_IDENTIFIER
should be set inside default_post.prf so that it can take the
value of QMAKE_TARGET_BUNDLE_PREFIX after it may have been set.
Task-number: QTBUG-66462
Change-Id: Iec1e2a43632efe6021b9d6bfdb78bd941326c456
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QAbstractItemModel::dataChanged() gained an optional role parameter
with Qt5 which was not filled within QTableWidgetItem setData() function
Task-number: QTBUG-48295
Change-Id: I82289b6db78eeef09d586da267046032984952da
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The property name for SP_DialogDiscardButton is missing the 'dialog-'
prefix to match the property described in knownStyleHints.
Task-number: QTBUG-58674
Change-Id: Ie5b7412765e19defb3644d7cac2fe08bf8119a8d
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QImage::transformed() can sometimes return an image with a different
image format than the original. This might be unexpected, so explain
it in the doc.
Task-number: QTBUG-50087
Change-Id: I165fc7b44439b770b542be52d3108fd70bf0ae99
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Add API to activate previously added Metal layer implementation.
This provides minimal support, and unlike VulkanSurface
there is no separate QWindow subclass.
What this does do is configure the QWindow to use a
Metal layer, and to send expose/update events when
the layer content should be redrawn. Qt will also update
the layer’s drawableSize and contentsScale when needed.
Application code can make use of this by accessing
the QWindow layer, which will be a CAMetalLayer:
CAMetalLayer *metalLayer = reinterpret_cast<CAMetalLayer *>(
reinterpret_cast<NSView *>(window->winId()).layer);
Change-Id: I514f5186133c3e610fd4e53ca91fe9c85c6d016e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Previously the test worked because the client was the last party to know
when encryption was established. However, due to changes in the TLSv1.3
handshake the server is now the last one.
In either case, relying on both to be encrypted when one of them is
finished is not great, so now we only quit the event loop when both
client and server have emitted 'encrypted'.
Change-Id: Ic1fc75671206d866f7ea983805fd58a99657aac6
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Didn't compile with it when I was moving it out.
Change-Id: I3645af71ea3295a61f20000a6bc4716b6e996ce5
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The check for having N valid characters is ptr + N <= end, because
ptr + N == end indicates that we have exactly N characters in the
string.
Change-Id: I5d0ee9389a794d80983efffd152d28d5aa485ce4
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QHeaderView::reset() did not reset the cached size hint which could lead
to wrong geometries when the model was reset.
Task-number: QTBUG-67927
Change-Id: I5100b28a741cc816133a229c422f9abf83f2187e
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
tst_QHeaderView::sectionSizeHint() did set some values but did not check
the return values.
Change-Id: Id606d7a06935a3d6783bc9a8c10bf05d953adec6
Reviewed-by: David Faure <david.faure@kdab.com>
Fix a typo to properly link to setInputMask instead setMask.
Task-number: QTBUG-61775
Change-Id: I0cb00de8dcaece613467e25b41e93661d6e98308
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
It seems there is a subtle bug in the Wacom tablet drivers for Windows that is
triggered in the very particular case where the running executable is named
"tablet.exe", regardless of its installation path. It causes WM_POINTER*
messages not to be delivered to the application, initially, but only after the
application's window is reselected, after another application's window had
been selected. It happens at least on Windows 10 systems with Wacom Bamboo
tablets and drivers, and was reproduced with non-Qt-based applications also.
It looks like a bad compatibility setting that makes "tablet" a cursed target
name for applications using tablet functionality. It seems older versions of
the drivers used to contain an executable with this name, although it seems to
be absent in newer versions. Unfortunately, the Qt tablet example uses this
name, which breaks it when used with upcoming WM_POINTER* messages support.
Change-Id: I931cc725b9117b4604267f7b0172110ae61700de
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
It can happen that the user sets a default printer option choice,
using lpoptions or similar, and that is a mistake since
that choice is not available because it needs an installable option
that is not in the printer. We need to check that and set the internal
ppd option not to the value the user gave to lpoptions but to
something sane
Also rename foundMarkedOption to foundMarkedChoice since we're going
through all the choices of a given option in that loop
Change-Id: Ic9362d9b4fba33025c4d45eed8ddd203c95836bf
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
This reverts commit 0b815aa2f8.
Inter-module compile issues have been resolved now, see
qtwayland/44f3b888a3f88ac8097ff65aec0101dbe6a369ef.
Change-Id: I7f9ed4f9d5f0d6431493a8f47ffe8a85141f0e50
Reviewed-by: Liang Qi <liang.qi@qt.io>
qarraydataops.h:73:17: error: ‘void* memset(void*, int, size_t)’ clearing an object of non-trivial type
‘struct TCBPoint’; use assignment or value-initialization instead [-Werror=class-memaccess]
Change-Id: I5d0ee9389a794d80983efffd152ce10eb557341f
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
instead of pre-resolving them and passing the final LIBS to qmake, pass
raw QMAKE_*_LIBS* assignments and a QMAKE_USE stanza. the immediate
benefit of that is that it centralizes the debug/release lib handling,
which makes build variant overrides available to all libraries, not just
a few selected ones.
note that this removes the CONFIG+=build_all from the test projects.
turns out that this was ineffective to start with, as config tests are
built with an explicit CONFIG-=debug_and_release. we might re-instate it
in a non-broken way later on.
Change-Id: I2117c5b36937e8230bd571dcee83231515cbe30b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Replace the global variables qout, qerr by a functions to delay
the initialization.
Task-number: QTBUG-68166
Change-Id: Ib023da1bccc7eabc6e633ccb8945e5f209c5765e
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Brett Stottlemyer <bstottle@ford.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
this de-noises the code somewhat, and makes it possible to eval() the
code generated by $$qtConfLibraryArgs(), which we want to do later.
Change-Id: Ib6101c6745101801e34f8fab1ad6651e624130c7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This supplements b1945604a7, which
removed the qrc file in favor of test/test.pro coding for it.
Change-Id: I15507c89ca14fa6e6b8223de671ffff7092272d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Replace with QSignalSpy or QTRY_COMPARE when possible.
Task-number: QTBUG-63992
Change-Id: I18dc8837301424855487a12ee62451a5aeb21bf0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The new API allows us to pass the mouse buttons and
keyboard modifiers along with the QWSI event.
Task-number: QTBUG-57168
Change-Id: Ic54c012d1593d922e7dcd31facab2f2c630c7996
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add support for QSurface::VulkanSurface and QVulkanWindow.
Usage:
1) Build MoltenVK according to instructions
2) Configure Qt: ./configure -I /path/to/MoltenVK/Package/Release/MoltenVK/include
3) export QT_VULKAN_LIB=/path/to/MoltenVK/Package/Release/MoltenVK/macOS/libMoltenVK.
Implement support for QSurface::VulkanSurface by enabling
layer mode for QNSView and then creating a CAMetalLayer,
which the MoltenVK translation layer can run on.
MoltenVK provides an implementation of the Vulcan API,
which means that the platform integration is similar
to other platforms: implement a QCocoaVulkanInstance
where we pass the QNSView instance to the vkCreateMacOSSurfaceMVK
Vulkan surface constructor function.
Using Vulkan directly without QVulkanWindow is possible, but not
tested.
We currently load libMoltenVK at run-time and use the
existing QT_VULKAN_LIB environment variable to set its
path. For deployment purposes it would be better to
link against MoltenVK.frameworkm, but this
Task-number: QTBUG-66966
Change-Id: I04ec6289c40b199dca9fed32902b5d2ad4e9c030
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Task-number: QTBUG-67777
Change-Id: I6d52b650fb33283010ef06259da83cdb2fd3483f
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... that were removed in 10b3286313.
This is needed so we can properly resolved inter module
dependencies (update qtwayland to use the new API).
Task-number: QTBUG-68151
Change-Id: If9c3b42f76bd2c1d8fc86304cfcc22c18bad9e27
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
