- Blacklist ioHttpRedirectPostPut for Windows
- Amend 84396a3f93:
Keys need to be on subsequent lines
Task-number: QTBUG-62583
Change-Id: I6360ec7bd87de65a3294a0d22148f13579fcd292
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Similar to the problem found in QTcpSocket auto-test recently.
While the failure on CI looks differently (apparently, server process
starts but does not print anything), fixing the dependency does not
hurt and at least fixes the 'make check' scenario.
Change-Id: I8f29f3e492d22410533407a527f5fc8f664e7f5c
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This test was failing recently on Windows 7, mingw, x86. It's not
failing now and attempts to reproduce the failure on CI's VM were
unsuccessful. Anyway, just reading the code is enough to spot
race-conditions: two threads are accessing two shared boolean
variables without any protection.
It's unclear if these races were the reason why the test was failing,
but we fix them for good anyway. Also, a failure to start a thread
or to start listening on a TCP socket is not treated as XML-related
failure anymore and QSKIPped instead.
Change-Id: I5115ce6c33cafc91485f8cf6e7e268d954976556
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Resizing a QTreeeView section with double click or
resizeColumnToContents() does not respect the maximumSectionSize when
the resize mode is Interactive or Fixed. Since the documentation of
maximumSectionSize states that it should honor this property for those
cases either the documentation or implementation is incorrect.
This patch fixes the latter.
Task-number: QTBUG-64036
Change-Id: Ic14c8e444d50b9c50a117efed19d0bca7ec1cf82
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test contains Oracle specific queries and will fail for other DBMS.
Currently it doesn't fail, because it is skipped for drivers that doesn't
support BatchOperations and only QOCI supports batch operations.
Change-Id: I8f1e7c7244726fa11c841023dec186553747a6b5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The test showed flakyness on Linux. It has been observed that its
windows overlap. Position the windows beside each other.
Change-Id: I4ff1b9cafaf753a6844b3dfabb576a07f74b396a
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
The milli-seconds since epoch value for an invalid transition is,
of course, invalidMSecs(), not invalidSeconds().
Added a comment while I was at it, explaining why we expect a
transition before the epoch, if such transitions are supported.
Change-Id: I0f376f9d69c0e6e79a309dc011943baa41175135
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... that become apparent after switching qtestlib to use enhanced mouse
event (a37785ec76). With the old code path,
where QGuiApplication was deducing event type it would deduce mouse release
event even when there wasn't one. The new code path doesn't do that, which
revealed an obscure problem when mixing QTest::mouse* APIs (where QWindow
overload goes through QWindowSystemInterface API and QWidget overload goes
through QApplication::notify() and sets mouse_buttons from there). What
happened in this specific test case "./tst_qtreeview selection statusTip" was:
// tst_QTreeView::selection sets mouse_buttons = Qt::LeftButton from QApplication::notify
QTest::mousePress(widget, Qt::LeftButton, ..)
// tst_QTreeView::statusTip
QTest::mouseMove(window, )
The old code path sees that position and state has changed, creates a fake
mouse event, which gets deduced as mouse release even if there wasn't one.
And by luck this happened to set mouse_buttons=Qt::NoButton. So when we use
mouse_buttons later to create QMouseEvent everything works as expected. With
the enhanced mouse we don't clear the pressed button from mouse_buttons (set
in tst_QTreeView::selection) as this is done only from press/release events,
then pass it to QMouseEvent and later because of that QApplicationPrivate::
pickMouseReceiver() returns nullptr.
The fix here is to use e->buttons when constructing QMouseEvent, instead of
relying on mouse_buttons which gets changed from various places and has other
issues that can not be solved without invalidating the current documentation
of QGuiApplication::mouseButtons() (e.g QTBUG-33161). Tests and any Qt code
in general should avoid using the fragile QGuiApplication::mouseButtons() API.
This patch does not affect the old code path (it continues working as before)
and fixes the issue described above for the enhanced mouse API. The enhanced
mouse API actually is better in a way that it does not get affected by button
state from test functions that run earlier, as opposed to the old code path
where every subsequent test function uses mouse_buttons in whatever state it
was left by the test functions that run earlier.
Not relying on mouse_buttons when creating QMouseEvent helped also to discover
other logic error. This caused an in incorrect button state for a mouse move
event that is generated for a release event that simultaneously changes a mouse
position.
Task-number: QTBUG-64043
Change-Id: I6ad8e49d8437ab0858180c2d0d45694f3b3c2d60
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
While removing insignificant flag in commit
38a0909d4e and blacklisting
autotests that still failed, qtbase builds didn't
verify VS2017. That broke qt5 builds which do build VS2017.
Task-number: QTBUG-64264
Change-Id: I5fdfa5dac6192f449a05146a9a422e428a710c84
Reviewed-by: Liang Qi <liang.qi@qt.io>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by moving them in QTestPrivate namespace (qtesthelpers_p.h). This
header file is a convenient staging area for helper APIs, eventually
some could be moved to public QTest API.
This header file utilizes the same pattern as other qtestlib header
files - wrapping functions with QT_${LIBNAME}_LIB to automatically
enable certain APIs based on what is in the projects dependencies,
e.g. QT += widgets.
Change-Id: Ic0266429939c1f3788912ad8b84fc6e0d5edd68b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test is flaky on Unity due to regression introduced by QTBUG-39362.
Skip the test functions until QTBUG-39362 is resolved.
These test functions do not fail on Gnome and KDE, so the functionality
tested by check_cursorKeys* will be covered by other linux distributions
in CI.
Change-Id: Ifd1a7779a9728142424f4956dd6466c822ccde91
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Looks like I never even tested this. There were two problems:
1) when we asked for the recvmsg and sendmsg functions, we used the
wrong variable (socketDescriptor was still -1)
2) we extracted the destination addresses, but never set them in the
QIpPacketHeader object
The added tests confirm that this works on Windows, Linux, Darwin,
FreeBSD. There also seems to be a problem, obtaining the destination
address on an IPv4 socket with a dual-stack sender (I can reproduce that
on FreeBSD, macOS and Windows, plus an old version of Linux).
Task-number: QTBUG-63605
Change-Id: I638cf58bfa7b4e5fb386fffd14ea732bddbc0c42
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Both of the new toolchains (armv7 + arm64) have some problems with d-bus
tests. Skip them until the toolchain has been fixed.
Task-number: QTBUG-60263
Change-Id: Ic300f419635fb6b49b3ea7f48fa76c19088c88bd
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
If a window is blocked by a WindowModal dialog, it should not be
possible to trigger window shortcuts on that window if it receives
a WindowActivate event.
This currently happens if the blocked window gets clicked, because the
window becomes the active_window and then QApplication sends it a
WindowActivate event (this doesn't happen with application modal dialogs).
The correctWidgetContext() function calls QApplicationPrivate::tryModalHelper()
only if the shortcut context is ApplicationShortcut. This patch makes it
call even if the shortcut context is WindowShortcut.
Change-Id: Iff87d85bcae603a6a24128e0cedfa9d33b6485fd
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Make the function brace policy consistent.
Change-Id: Iaf1f05a63958f19927e9b1953da06f99a4eba644
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Currently, when two colors are equal except for their alpha values,
QCOMPARE produces the following failure message:
FAIL! : tst_Test::test() Compared values are not the same
Actual (colorA): #ff0000
Expected (colorB): #ff0000
By using the HexArgb format instead of the default HexRgb, we can
see the full hex string, with alpha values included:
FAIL! : tst_Test::test() Compared values are not the same
Actual (colorA): #88ff0000
Expected (colorB): #ffff0000
Task-number: QTBUG-55574
Change-Id: Id82c60a1b473ac6025a6f6ac560fce95a910d782
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test fails often and seems to be flaky.
Task-number: QTBUG-62583
Change-Id: Id3af283c89e392634a7af6e11bd05775a4295798
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This test starts two processes - server and client - and requires
an external executable ('stressTest'). In .pro file we have SUBDIRS
containing both 'test' (test itself) and 'stressTest' (client/server app),
but there is no explicit dependency and as result we run the test before
we build 'stressTest' thus failing to start those processes. This patch makes
'test' dependent on 'stressTest'.
Task-number: QTBUG-36629
Change-Id: I286b08bcff86b9afc4bbee87a75e887527eaf5f2
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Discussed during Qt Contributor Summit 2017. We concluded that we don't
want to make these functions public, as they do not follow Qt coding
style API. Specifically,
qStartsWith(a, b)
is not easily understood which argument is the needle and which argument
is the haystack (same problem memcpy() has). Compare that to
a.startsWith(b)
which can clearly be read in English as a subject-verb-object sentence.
This commit removes the unit tests that called compare().
Discussed-on: http://lists.qt-project.org/pipermail/development/2017-October/031060.html
Change-Id: Icaa86fc7b54d4b368c0efffd14ee6205eb9043fb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Right now,this does really nothing. This commit is just to allow us to
transition the other modules (besides qtbase) to use the syntax that
will become the API.
I've marked three places to use the system CSPRNG:
1) the QHash seed
2) QUuid
3) QAuthenticator
I didn't think the HTTP multipart boundary needed to be
cryptographically safe, so I changed that one to the global generator.
Change-Id: Ib17dde1a1dbb49a7bba8fffd14ecf1938bd8ff61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add some helpers to convert the coordinates and change the code to use the
QWindow-based mouse test API. Remove mouse presses on the second and third menu
from task256322_highlight() since moving the mouse is sufficient to switch
menus.
Remove blacklisting/skipping of macOS and offscreen.
Task-number: QTBUG-63988
Change-Id: If3e94170d11df369aec199d13d54d39382a78723
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Neither the exit crash of QTBUG-21102 nor the Windows failure of
QTBUG-24226 appear to be reproduceable.
Add verbose error reporting to getErrors() and blacklist
getErrors:ftp-host which has been found to fail with timeouts
on Linux and ioHttpRedirectMultipartPost.
Task-number: QTBUG-21102
Task-number: QTBUG-24226
Task-number: QTBUG-62860
Change-Id: I6b29f6184e83de8ffebf6ff0d80606512dca6419
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It fails for me on Windows 10. Therefore, this is wrong.
FAIL! : tst_QHostInfo::initTestCase() 'networkSession->waitForOpened(30000)' returned FALSE. ()
S:\qt\qt5-msvc2017-x64\qtbase\tests\auto\network\kernel\qhostinfo\tst_qhostinfo.cpp(194) : failure location
Change-Id: Ib17dde1a1dbb49a7bba8fffd14ed5691472a4760
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Open failures due to sharing violations have been observed in Coin.
Change-Id: If7fbe01a454b3c343c0b87f73db50c28eae901c3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Guard the FILE * obtained by fopen() by a RAI class ensuring
the file is closed on destruction.
Change-Id: I9297f91ca2120238f3a44bad92bca5f920e01aa8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
tst_noqteventloop.cpp 'event' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'canFetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'fetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'hasChildren' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'rowCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'columnCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'index' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'parent' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'data' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'begin' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'end' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'updateState' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'drawPixmap' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'type' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
Change-Id: I2a0c5da15994619383c1f90fee311927e58d7af0
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
... the same way other tests do in this file.
Change-Id: Ifcaee084bd20c55d6b9f7ddcf35daebce2a02e07
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There were a couple of corner cases where doing setPort() would result
in QUrl thinking that an authority was not present. Since the full URL
parsing implies that a host is always present if the authority is
present, then we also imply that setting the port number makes the host
be present too.
Change-Id: I69f37f9304f24709a823fffd14e67c12da18d69f
Reviewed-by: David Faure <david.faure@kdab.com>
1. Recently we have updated our receive window size to a larger value.
Unfortunately, this also results in auto-test pumping through
more data, which probably takes more time on CI.
At the moment we do not have any public API on QNAM's level to
customize HTTP/2 parameters (aka 5.10/FF and so on). So we use the fact
that QNAM is QObject and we can set a property on it. This property
is our Http2::ProtocolParameters object that allows us to configure:
- HPACK parameters (in 5.10 - noop)
- session receive window size
- different SETTINGS as described by RFC 7540, 6.5.2.
2. Undocumented environment variable to set ENABLE_PUSH is not needed
anymore.
3. In 5.11 Http2::ProtocolParameter will become a public API
and we'll introduce a new setter in QNAM.
Change-Id: If08fd5e09e7c0b61cf9700b426b60b5837b6b2e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Ensure windows are cleaned up. Add scaling where native coordinates
are used.
Task-number: QTQAINFRA-1440
Change-Id: Ie080ff780c687418f4dc5d71fd49112486b217e6
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Currently on Windows, the Next button's shortcut doesn't work, because
QWizard overrides it with an empty key sequence.
The key sequence should be changed only if isVistaThemeEnabled() returns
true.
Task-number: QTBUG-46894
Change-Id: I54f26388b167973cc8065a867d9e771c1e6a2a72
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
c4cf90b1f7 made POST requests be
redirected properly, but this wasn't enough and should have included
every method/verb.
Change-Id: I37b12dc9fdffcbf2aadbd2360d4fc2584c024939
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QAction::setData() always emits changed() even without actual data change.
Original code lacks a guard to check if the data changes.
According to http://doc.qt.io/qt-4.8/signalsandslots.html,
adding guard also benefits to prevent infinite looping in case
of cyclic connections.
Task-number: QTBUG-62006
Change-Id: I776369b668082f9f02e4502a36b1ae234ee7e079
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The previous version was good, just not optimal. Because the input was
an unsigned 64-bit number, compilers needed to generate extra code to
deal with HW instructions that only convert 64-bit signed input. And
that was useless because a double uniformly distributed from 0 to 1 can
only have 53 bits of randomness.
The previous implementation did exactly what the Microsoft libstdc++ and
libc++ implementations do. In my opinion, those implementations have an
imperfect distribution, which is corrected in this commit. In those, all
random input bigger than 0x20000000000000 has a different frequency
compared to input below that mark. For example, both 0x20000000000000
and 0x20000000000001 produce the same result (4.8828125e-4).
What's more, for the libc++ and MSVC implementations, input between
0xfffffffffffff001 and 0xffffffffffffffff results in 1.0 (probability 1
in 2⁵³), even though the Standard is very clear that the result should
be strictly less than 1. GCC 7's libstdc++ doesn't have this issue,
whereas the versions before would enter an infinite loop.
Change-Id: Ib17dde1a1dbb49a7bba8fffd14eced3c375dd2ec
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The path wouldn't match if the cookie's path was root ('/') and the
URLs path was empty.
Change-Id: I6dcd10f1fdf4f48f14e50f1b169cbdfda7005849
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
All systems must implement it by now. If there's any system still
without it, that means it has no IPv6 support, so they can disable
QtNetwork entirely.
[ChangeLog][Deprecation Notice] Starting with Qt 5.10, IPv6 support is
mandatory for all platforms. Systems without proper IPv6 support, such
as the getaddrinfo() function or the proper socket address structures,
will not be able to build QtNetwork anymore.
Change-Id: I3868166e5efc45538544fffd14d8c28046f9191b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtNetwork][QHostAddress] Added isGlobal(), isLinkLocal(),
isSiteLocal(), isUniqueLocalUnicast(), and isBroadcast() classification
functions to complement isLoopback() and isMulticast().
Change-Id: I3868166e5efc45538544fffd14d8fca6e9042c04
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
All POST requests that were redirected would previously turn into GET
requests. This does not follow the standard for HTTP codes 307 and 308.
Task-number: QTBUG-63142
Change-Id: Ibd25a9566066e589670a9bc34e5dc5111f8139d5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In some cases when a session isn't needed (i.e. for localhost), the
session is not opened at all. If a program (e.g. our tests) redirects
from localhost to a different system (e.g. the qt network test
servers, or the internet) it will wait for a session forever. So, we
need to check if a session is needed for the redirect-target and then
open one. It is usually opened in
QNetworkReplyHttpImplPrivate::_q_startOperation
Change-Id: Id3b78182a3fb3f63f0235ecb1fb665df8bd0c4ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
From: https://tronche.com/gui/x/xlib/events/exposure/expose.html
"The circumstances in which the X server generates Expose events
are not as definite as those for other events."
On windows with XCB_GRAVITY_NORTH_WEST flag set we should not get
expose events according to e2665600c0,
but as stated earlier this might not always be true.
Nevertheless, sometimes we get expose event from X server when shrinking
window, but most of the time we don't. Make the test not flakey by
checking that we get at least 1 expose event, instead of exactly 1.
Now running test 500 times in a loop does not fail.
Task-number: QTBUG-63424
Change-Id: I8004e622020cc09e11b7d592faf6d9ee1b9cfee2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 542e11ab2b)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Tests should not use QCursor to emulate mouse move, see QCursor::setPos() docs.
The flakiness of the test on XCB is not surprising when the test queries geometry
even before the window has been shown. With the re-factored version I could not
reproduce flakiness anymore.
Removed Q_OS_MAC and closed QTBUG-26274 as test passes on macOS from which I
assume that the underlying issue has been fixed.
Removed Q_OS_QNX ifdef as test does not rely on QCursor anymore.
This patch also fixes the issues on minimal / offscreen platform plugins.
QCursor::setPos() is evil for auto test purposes.
Note:
We intentionally use QTest::mouseMove(QWindow *window, ..), not the QWidget overload.
The QWindow version gets routed through QWSI, which ensures that all necessary events
are generated as expect. In QWidget code path this is currently disabled by
QTEST_QPA_MOUSE_HANDLING.
Change-Id: I285c26cff09e3f2750f8c2abbb1f46c8f7be984a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 1af927976a)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
We already cleared 'cookedHeaders', which is a QHash for 'known headers'
(enumerators as keys instead of strings), now do the same for 'rawHeaders'-
not to end up with some weird mix of headers from all possible redirect
responses and the final response.
Task-number: QTBUG-61300
Change-Id: Ifd6655c4167840bb00d29446d36ce65ba2d5491a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A few tests would QSKIP depending on the inclusion of SSL, producing
multiple lines of noise in the output.
And one test used https in one of its configurations without checking to
see if it could, causing an UnknownProtocolError.
Change-Id: I5f54bf1005f962cc027c099b816fbe245dc43d3f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QStandardItemModel::setItemData replaces the content of an item data
with the new values rather than updating/inserting which is
the behavior for QAbstractItemModel. This patch aims to unify the
behavior.
[ChangeLog][QtWidgets][QStandardItemModel] Fixed setItemData()
incorrectly deleting unmodified data. That behavior is not
following QAbstractItemModel's documented behavior which is
no modification of data not provided in parameter.
Task-number: QTBUG-45114
Task-number: QTBUG-10872
Change-Id: I2be40cee372b68d9f71c976548ecda6dc3011241
Reviewed-by: David Faure <david.faure@kdab.com>
On macOS, absence of a QPA menu means that we should be using our
own internal logic since there's no entity on the QCocoaMenuDelegate
to take care of the shortcuts.
Change-Id: I35ed8f0b55445f61d0528709d4debb636a502002
Task-number: QTBUG-61039
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We were using the default ones, provided by RFC7540. It appears they are way
too restrictive and conservative: when downloading something relatively big,
a stream keeps spending the whole session/its own 'recv' windows and thus
we have to constantly send WINDOW_UPDATE frames. This significantly slows
down our HTTP/2 implementation, making it orders of magnitude slower than
HTTP/1.1. To fix this:
- We send SETTINGS_INITIAL_WINDOW_SIZE in the first SETTINGS frame
to inform our peer that per-stream WINDOW is bigger than 64Kb
- We increase the session's receive window size.
Task-number: QTBUG-63722
Change-Id: I31312fcfd5f0fc0aee6aaa5d3562cc7d1b931adc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Error out if it's missing or broken (Mersenne Twister not present).
This ensures that we never have a low-quality random generator in Qt.
Change-Id: I0a103569c81b4711a649fffd14ec80649df7087e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Auto-reset events are automatically reset to non-signaled when we get
notified about the signaled state. This implies that we cannot check the
event state again in activateEventNotifiers. Instead, store the signaled
state in a QAtomicInt and test and decrement that.
This amends commit 85403d0a.
Task-number: QTBUG-63555
Change-Id: I0adee3d2929783f98d91060f9106c8b5266d72fa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Unique begins with a "y" sound, hence a unique is correct.
Change-Id: I9eb6b4d4c9ddab45af931e97c041c24edf163eca
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
... so that it comments the actual code, not what this code was before.
Change-Id: Ib191b9d7bd3ae3cda39a15f0f711cb1dd3c5c2b7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
On some systems (e.g. Debian/buster) a standard Qt package may install
a qtlogging.ini file, e.g. in /etc/xdg/QtProject/, which suppresses
QDEBUG output. A ~/.config/QtProject/qtlogging.ini could interfere
similarly. This can break the selftest, when run with expected_*
files generated without such interference. Likewise, if those
expected_* files are generated on a system such similar, they won't
work on CI. Given that this caused confusion and delay with
integrating the latest set of updates to the expected_* files, it
seemed best to save others from similar bafflement.
So set a standard value for QT_LOGGING_RULES in both the selftest and
the generator script, so we get consistency.
Change-Id: I649e2f1f6ead21edf8af051aaee286e369fed064
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
In selftests.qrc, imposed alphabetic order (on stem of name, then on
suffix, effectively treating . as sorting before any letter) while
removing old tests and adding new tests and data. Updated all non-csv
files and added many missing files. (Not clear on csv support status;
the script seems to have dropped it after 5.6, but the test still uses
it.)
Left expected_crashes* alone (no new files added, no update to old) as
I don't get results resembling those anticipated.
Omitted printdatatagswithglobaltags, printdatatags due to dangling
hspace on output lines, which upset sanity-bot. A change to the test
cpp is needed to make it viable to skip that dangling hspace.
Change-Id: Iab3fb626c44a91c249b2fb626c12c75ea0317098
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The autotest has been blacklisted for RHEL 7.1 and RHEL 7.2 earlier already
and it is still failing in 7.4.
Task-number: QTBUG-46116
Change-Id: I0f33be849513a2debaf8c093dcd413fa09b5c681
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
The TIMESTAMP type has been available in Oracle since Oracle 9i
which was released in June 2001 and contains more data than the
DATE type so it can be reliably used for the related data types.
This adds support for preserving milliseconds and the time zone
information if this is passed or in the database.
[ChangeLog][QtSql][OCI] Added support for the TIMESTAMP data type.
Task-number: QTBUG-23
Change-Id: Icf7a012dda75fb342ce6c6aa34eaa2a52755ff2d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Commit ba1b73175b tried
blacklisting this autotest in Windows 7 only. This however
does not work. We can't pin point blacklisting to a specific
Windows version.
Task-number: QTBUG-63122
Change-Id: I5edb5b56fd86ad194214818a838db9cfd6be2ad1
Reviewed-by: Simo Fält <simo.falt@qt.io>
This autotest has been blacklisted already in RHEL 7.1
and RHEL 7.2. This one extends it to 7.3 and 7.4.
Task-number: QTBUG-52523
Change-Id: I3e2d8cd882d9f7dc58a65bde88e3aa16438b13c3
Reviewed-by: Simo Fält <simo.falt@qt.io>
308 Permanent Redirect was introduced after redirection support was
initially added to Qt.
[ChangeLog][QtNetwork][QNetworkAccessManager] Added support for HTTP status 308.
Task-number: QTBUG-63075
Change-Id: I1c6cda331d776237113ef8854de9abfe7e41ed3e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We're not going to crash to avoid core dumps getting recorded by
systemd, filling up filesystems or showing dialog boxes. We just need to
exit without running destructors. Now, exit() isn't supposed to run
function-scope destructors, so just in case we use _exit().
Change-Id: I0b48fc8e90304e0dacc3fffd14e909ff248ce1a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This makes qtestlib behave more like real Qt applications with an
event loop, where exiting the application does indeed flush deleteLaters.
And since every test method is supposed to be independent from other
test methods, we should even cleanup between tests.
For "app less" tests, no flushing happens.
Real life use cases:
* A unittest for some code (e.g. KIO job) which uses a socket, runs an
event loop until the socket communication is done, and ends. However
slotDisconnected() does, as recommended, socket->deleteLater(). So the
test finishes before the socket has a chance to actually get deleted,
and memory leak tools flag a memory leak, which doesn't actually happen
outside the unittest.
* Deleting a QWebEngineView with deleteLater is even worse than a memleak,
it leads to an assert (from a global object destructor) in QtWebEngine
if the view deletion hasn't actually been processed.
Change-Id: I18fc822fd26988a0fa4e75313c1947fcaa7d9e56
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
<future> is needed by QThread::create. Instead of a fragile series
of preprocessor tests, move its detection to a configure test.
This dramatically simplifies the code, but on the other hand ties
the availability of QThread::create() to the system used to compile
Qt (rather the one used to compile an application).
Change-Id: If1b06363379bf29126cfa68f2a0651cbb78a67f7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commits aba336c2b4 (in Qt 5.2) and
aba336c2b4 (in 5.6) both tried to deal
with this problem, with different levels of success. This is the third
attempt (and hopefully the charm).
Instead of modifying the path that the user provides, go straight ahead
and declare it invalid. This is supported by RFC 3986, which declares
this expansion impossible:
relative-part = "//" authority path-abempty
/ path-absolute
/ path-noscheme
/ path-empty
path-abempty = *( "/" segment )
path-absolute = "/" [ segment-nz *( "/" segment ) ]
path-noscheme = segment-nz-nc *( "/" segment )
The "path-abempty" and "path-noscheme" cases are the two issues we
already handle. This commit adds the third one: path-absolute, which
requires that the first segment of the path be of non-zero length.
That is, it is now possible again to have http://example.com//path
constructed piece-wise, without it producing http://example.com/path.
Additionally, it catches the case of http://example.com//path parsed
from full URL then followed by setAuthority("").
Change-Id: I69f37f9304f24709a823fffd14e67a5e7212ddcd
Reviewed-by: David Faure <david.faure@kdab.com>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test tst_QXmlSimpleReader::inputFromSocket() is failing with
"QTestLib: This test case check ("(((server->listening)))") failed
because the requested timeout (5000 ms) was too short, 11700 ms would
have been sufficient this time".
Increased the timeout, since it's better to wait than to fail.
Task-number: QTBUG-63539
Change-Id: I804549648ea834e41d3c87871f5bab90f209385c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When many runnables are executed, this improves the
performance by not resizing the queue for each runnable,
which was the case in the previous version, because of
many calls to QVector::takeFirst().
Also add a test that makes sure tryTake() is safe to
call and does not leave the queue in a bad state that
tries to use nullptr entries.
Change-Id: I608134ecfa9cfc03db4878dcbd6f9c1107e13e90
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can't qWaitForWindowExposed on native menu bars. Other test
functions in this file are already disabling the native manu bar.
Task-number: QTBUG-24326
Change-Id: Iecf907ca84589159417d0d942c911485a41af164
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
A "compound widget" is a widget that has a focus proxy set to an inner
child. This is normal for complex black-box components where focus handling
is delegated to the children. Since the compound can have several
children, a local tab order might exist between them.
The current implementation of setTabOrder had no idea about
compound widgets. As such, when connecting two compounds in the
tab chain, it would just break up their inner tab order and
cause tabbing to ignore children other than the proxy.
The new implementation recognizes compound widgets, and add some
extra code to figure out the correct tab targets. This way, the
local tab order between the children will be preserved.
This implementation was inspired by the patches of Marek Wieckowski posted
in the linked bug report, and later modified by Nikita Krupenko.
[ChangeLog][Widgets] QWidget::setTabOrder() will now preserve the local
tab order inside a widget if it has a focus proxy set to an inner child.
Task-number: QTBUG-10907
Change-Id: I0673d39d70ec8c6bf64af30bf978d67c651b2f3c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The original test was using QSslSocket::waitForEncrypted function, which
is apparently a bad idea on Windows: connecting to 'www.qt.io' we have
to verify certs and there is no guarantee a given Windows VM has the required
CA certificate ready in its cert store. In such cases we start a background
thread (aka CA fetcher's thread) and it calls a (potentially blocking for
a significant amount of time) function (CryptoAPI). When finished, this
thread reports the results via queued connection, which does not work
if we are sitting in a tiny-loop inside waitForEncrypted. Re-factor
the test to use signals/slots and a normally running event loop.
Also, the last test makes a wrong assumption about Windows - fixed.
Task-number: QTBUG-63481
Change-Id: I4abe9cda2a6c52d841ac858cccb6bf068e550cb8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Convert QSysInfo/QOperatingSystemVersion to __builtin_available where
required or possible, or to QOperatingSystemVersion where
__builtin_available cannot be used and is not needed (such as negated
conditions, which are not supported by that construct).
Change-Id: I83c0e7e777605b99ff4d24598bfcccf22126fdda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWindowContainer assumed that a widget could never change from
native to non-native. This is not a fact when the window container
is reparented to toplevel and back. In this case, usesNativeWidgets
would be stuck at true, and parentWasChanged() would go down the
native widget path, triggering an assert.
The solution is to always recalculate the usesNativeWidgets bool.
Task-number: QTBUG-63168
Change-Id: I88178259878ace9eb5de2ee45ff5e69b170da71c
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Swapping from RHEL 7.2 to 7.4 produces new autotest failures.
Task-number: QTBUG-63433
Change-Id: I3e59aa73b5874cfec06e166f521e06b0c7829743
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This avoids looping prior to the main 16-byte loop, by performing one
load that may include bytes prior to the start of the string. This is
guaranteed not to fault, since str points to a valid character, but it
may cause Valgrind to print warnings.
Change-Id: I6e9274c1e7444ad48c81fffd14dcae854bba24b2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By the time we call setKeyboardMode(true), the menu may
already have taken focus. This change sets keyboardFocusWidget
before opening the popup, and makes sure that keyboardFocusWidget
is not set to the popup. (We cannot remove the assignment from
setKeyboardMode(), since it's called from several places.)
[ChangeLog][QtWidgets] Fixed widget losing focus after showing
menu second time.
Task-number: QTBUG-56860
Change-Id: Ic01726bf694e6f365dd7b601ad555156e0fdf6c5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
From: https://tronche.com/gui/x/xlib/events/exposure/expose.html
"The circumstances in which the X server generates Expose events
are not as definite as those for other events."
On windows with XCB_GRAVITY_NORTH_WEST flag set we should not get
expose events according to e2665600c0,
but as stated earlier this might not always be true.
Nevertheless, sometimes we get expose event from X server when shrinking
window, but most of the time we don't. Make the test not flakey by
checking that we get at least 1 expose event, instead of exactly 1.
Now running test 500 times in a loop does not fail.
Task-number: QTBUG-63424
Change-Id: I8004e622020cc09e11b7d592faf6d9ee1b9cfee2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When tabbing/searching for the next focus widget, the current
code would check if the next widget in the focus chain
had a focus proxy, and if so, ignore it. The exact reason
for this behavior is not clearly understood, but some widgets
(e.g QSpinBox) has children (a QLineEdit) that sets the parent
as focus proxy. If we didn't ignore children with focus proxy, tabbing
from a QSpinBox would lead us to find the inner QLineEdit, which
(because of its proxy), would lead us back to the QSpinBox. And
therefore not be able to tab out.
But ignoring the focus proxy has other problems. Normally a focus
proxy is the next sibling to the widget it acts as a proxy for, and
tabbing to the widget will therefore appear correct. But if the
focus proxy is not the next sibling, the logic will fail, since
the tab would anyway give focus to the next sibling. This becomes very
apparent if the focus proxy is a child of the widget, since then
its likely that the focus proxy is not the _first_ child among all
the children. So tabbing to the parent would not give focus to
the proxy.
This patch will change this logic so that you are allowed to tab to a
widget with a focus proxy. But we check that if you do so, you actually
end up moving focus in the right direction. If not, we ignore it like
before. This will ensure that we tab correctly when dealing with focus
proxies, and especially when focus proxies are used to construct
compound widgets.
[ChangeLog][Widgets] When tabbing to a widget with focus proxy, focus
will now be given to the proxy rather than just being ignored.
Task-number: QTBUG-10907
Change-Id: I66d1da5c941fdd984bb2783cc355ca65b553b5dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
"generate" is better than "get", and we already have "generate(it, it)"
which uses std::generate(). This changes:
- get32() → generate()
- get64() → generate64() and QRandomGenerator64::generate()
- getReal() → generateDouble()
Change-Id: I6e1fe42ae4b742a7b811fffd14e5d7bd69abcdb3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Due to the complex event forwarding logic between QCompleter,
QComboBox, QLineEdit and QWidgetLineControl, in some cases the
same single user return key press could result in duplicated
activated() signals being emitted by QComboBox. The first one
would be emitted because QLineEdit emitted editingFinished()
as a result of QCompleter::eventFilter() having forwarded the
return key press event to QComboBox. The second one, would
happen right after, as QCompleter::eventFilter() would process
the same event on behalf of its popup.
(We recall that QCompleter is installed as its own popup event
filter. That's also the case for the completer's widget, although
the purpose there is limited to focus-out events).
The current fix consists on skipping the emit as a result of
QLineEdit::editingFinished() if the completer's popup is still
active. For this to be accurate, it helps to test whether the
completer's popup is visible, so we will not be hiding it in
QWidgetLineControl::processKeyEvent() anymore. Indeed, we know
that if the popup is visible, that means that processKeyEvent()
was called after being forwarded by the completer's popup event
filter. Furthermore, the popup will be hidden by its event filter
shortly after it returns from said event forwarding call.
Based on a patch by Alexey Chernov <4ernov@gmail.com>.
Task-number: QTBUG-51858
Task-number: QTBUG-51889
Change-Id: I013f6c3000ae37b5b0ec20eaf5cf7746c9c903e3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The comment was back-to-front on the meaning it needed to address; and
the #if-ery used a deprecated define, now changed to match what
sanity-bot asked for.
Change-Id: I0a971ab2e405e5908066da86964d67c8b852f114
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This autotest is blacklisted as it is deemed flaky.
Task-number: QTBUG-63262
Change-Id: I216985e81d1c1cb3528fd8a005be48cad2a31ab7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This autotest is blacklisted as it is deemed flaky.
Task-number: QTBUG-63260
Change-Id: I3e83bcb0dbbe4fbf9d5c16f764fbeeca2b52d10c
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
When focus is put back onto an itemview and the current item is editable
then the WA_InputMethodEnabled attribute should be set. Likewise this
should be set/unset when the current index changes too, depending on
whether the index is editable or not.
Change-Id: Iaea075e669efd21bdaa89a49c500c449272d098b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change-Id: Iffb81a37a517e58d48757d82f93f20e8c5100033
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In preparation to move the code into QTestLib proper.
* Move to PMF-based connect() statements
* Remove a bunch of commented out code
* Streamline the logging of debugging / warnings, use categorized logging
Change-Id: Iec0872b63959decce49487762472c9a82bcc9fa1
Reviewed-by: David Faure <david.faure@kdab.com>
For self-consistency with QSharedPointer and minor consistency
with std::unique_ptr (although QScopedPointer isn't movable, so we
can't claim STL compatibility with it).
[ChangeLog][QtCore][QScopedPointer] Added get().
Change-Id: Ib58f936afa0e0d5bce57a61d1467b69956f37ceb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In data(), index belongs to the proxy, not to the source. It needs
to be mapped back to it first.
Change-Id: Ie5dcbf13166dadf62f3d85b594d3227383132521
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
One example is VxWorks.
Change-Id: I253df715a9417c1f9cede79b1e1860924e0da8a9
Reviewed-by: Tuomas Heimonen <tuomas.heimonen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We don't need to bother the network test server with a TCP SYN packet.
All we need is for the local operating system to figure out the IP
address it would use to send a packet to the test server. We can do that
with QUdpSocket.
Also, the network test server hasn't been called "fluke.troll.no" for
almost a decade.
Change-Id: I209fcd5dbc2b4e5381cffffd14df65ccc7133247
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The function was only well defined from RGB32 and ARGB32PM formats,
this patch fixes it so it behaves well from all formats.
Task-number: QTBUG-63163
Change-Id: Id892531d9aaf997b707b430196c1166493792a2a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Looks like whoever created the blacklist never tried to figure out why
it happened.
Change-Id: I84e45059a888497fb55ffffd14d2fb29e32a4521
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The issue itself is not really worth fixing (the very first request
being supposed to have a different proxy than any of the other
following requests before a session has been initiated), but we can
at least make the test pass when it is run alone.
Task-number: QTBUG-63134
Change-Id: I6c7df5c5653541031811e6bff562572061afae0f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Performance is more important in this case than the theoretical benefit
of constexpr. This commit implements the SSE2 search for 16-bit null and
it might be possible to implement the equivalent for AArch64
(investigation required). It also adds a fallback to wcslen() for
systems where wchar_t is short (non-x86 Windows or 32-bit x86 build with
-no-sse2).
We can re-add the constexpr loop once the C++ language has a way of
overloading constexpr and non-constexpr. GCC has a non-standard way to
do that with __builtin_constant_p, which is also implemented in this
commit, but note that the inline function is still not constexpr.
Change-Id: I6e9274c1e7444ad48c81fffd14dcaacafda5ebdc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some valid UTF-16 characters cannot be expressed in XML 1.0 and a
QString may contain invalid unicode. In both cases we should not write
the respective data to the output stream, as that generates invalid XML,
which then cannot be read back by QXmlStreamReader. In addition we
should report an error if we encounter them.
The change filters the incorrect strings from the output and introduces
an "encodingError" flag which is reported from hasError().
[ChangeLog][Important Behavior Changes] Characters invalid in XML, such
as 0x0 or 0xfffe, as well as strings containing unmatched UTF-16
surrogates are now suppressed from the output of QXmlStreamWriter and
cause the error flag to be set.
Task-number: QTBUG-63150
Change-Id: Ia29bab768fed9681dd68e8934da2a7e3fcdfc3cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When scrolling to the bottom of the view, if there are expanded items
then it should call canFetchMore/fetchMore up the chain until it
finds one with more items that can possibly be retrieved.
This brings it in line with the QAbstractItemView implementation
which would call canFetchMore on the root index, therefore we
go up the chain to the root to see if anything before that can be fetched.
[ChangeLog][QtWidgets][QTreeView] QTreeView now calls canFetchMore and
fetchMore when the bottom of the QTreeView is scrolled to.
Task-number: QTBUG-48725
Change-Id: I2b2145684bb34c8c317bfce4a0ef14f243a64719
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QMacAutoReleasePool is backed by an NSAutoreleasePool, which documents that
"you should always drain an autorelease pool in the same context (invocation
of a method or function, or body of a loop) that it was created".
This means allocating QMacAutoReleasePool on the heap is not a supported
use-case, but unfortunately we can't detect it on construction time.
Instead we detect whether or not the associated NSAutoreleasePool has been
drained, and prevent a double-drain of the pool.
Change-Id: Ifd7380a06152e9e742d2e199476ed3adab326d9c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Tests should not use QCursor to emulate mouse move, see QCursor::setPos() docs.
The flakiness of the test on XCB is not surprising when the test queries geometry
even before the window has been shown. With the re-factored version I could not
reproduce flakiness anymore.
Removed Q_OS_MAC and closed QTBUG-26274 as test passes on macOS from which I
assume that the underlying issue has been fixed.
Removed Q_OS_QNX ifdef as test does not rely on QCursor anymore.
This patch also fixes the issues on minimal / offscreen platform plugins.
QCursor::setPos() is evil for auto test purposes.
Note:
We intentionally use QTest::mouseMove(QWindow *window, ..), not the QWidget overload.
The QWindow version gets routed through QWSI, which ensures that all necessary events
are generated as expect. In QWidget code path this is currently disabled by
QTEST_QPA_MOUSE_HANDLING.
Change-Id: I285c26cff09e3f2750f8c2abbb1f46c8f7be984a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Speeds up the test from approximately 770ms to 180ms.
Change-Id: I2e5479fd5190b841b44d4a66380d27b1c3b55162
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The sources were already added conditionally in the project file since
179fe5981f.
Change-Id: I0baaec2e772f3e596d311c1973b9745aa2b80423
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Teach our MiniHttpServer to better handle POST and PUT requests:
read the POST/PUT data too (not headers only), before replying
and flushing. The original comment says MiniHttpServer does
not support POST/PUT requests, it's not true anymore - we can
handle them (perhaps the simplest/shortest ones).
Task-number: QTBUG-62844
Change-Id: I80260f8ede1bb1b0b9d6042ecd59558bb7e9a998
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore][QFileInfo] Relative symbolic links on Windows are
now resolved to their absolute path by symLinkTarget().
Task-number: QTBUG-62802
Change-Id: I5826517130bd389aef994bf3f4b6d99b2a91b409
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
They aren't used in the API, so let's stop wasting library size.
Change-Id: I6e9274c1e7444ad48c81fffd14db247ecf825a57
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since MSVC doesn't have <chrono> (according to QT_HAS_INCLUDE), the QSKIP
in the test was printed for every line in the table. Instead, add the
skip in the _data() function.
Change-Id: I6e9274c1e7444ad48c81fffd14dbcee5e5a322aa
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
This reverts commit 8561281768.
This change needs to be reverted because Windows 10 Creator's
Update doesn't fail on this test anymore during CI runs.
Reason for this is unknown.
Change-Id: Ice250ecedb14ac96fb3693b2d9884ef452a91cc2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This reverts commit 3d5bf00f18.
This change needs to be reverted because Windows 10 Creator's
Update doesn't fail on this test anymore during CI runs.
Reason for this is unknown.
Change-Id: I9f1c88606c97afc5952af34e04310612b783a9c2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
nullptr can be used directly in the Qt code since Qt 5.7.
Use it in generated code for consistency.
Change-Id: I249aeaf0a39b46ce1106b29d3ea4569a399908b7
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Without TLS (and thus ALPN/NPN negotiation) HTTP/2 requires
a protocol upgrade procedure, as described in RFC 7540, 3.2.
We start as HTTP/1.1 (and thus we create QHttpProtocolHandler first),
augmenting the headers we send with 'Upgrade: h2c'. In case
we receive HTTP/1.1 response with status code 101 ('Switching
Protocols'), we continue as HTTP/2 session, creating QHttp2ProtocolHandler
and pretending the first request we sent was HTTP/2 request
on a real HTTP/2 stream. If the first response is something different
from 101, we continue as HTTP/1.1. This change also required
auto-test update: our toy-server now has to respond to
the initial HTTP/1.1 request on a platform without ALPN/NPN.
As a bonus a subtle flakyness in 'goaway' auto-test went
away (well, it was fixed).
[ChangeLog][QtNetwork][HTTP/2] In case of clear text HTTP/2 we
now initiate a required protocol upgrade procedure instead of
'H2Direct' connection.
Task-number: QTBUG-61397
Change-Id: I573fa304fdaf661490159037dc47775d97c8ea5b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Consider the following:
/root/target - a file
/root/path/link -> ../target
/root/path/other/exe - executable
Running from /root/path/other.
exe is:
#include <QDebug>
#include <QFileInfo>
int main()
{
qDebug() << QFileInfo("../link").symLinkTarget()
return 0;
}
The link references /root/target, but the current output is
/root/path/target.
The link doesn't depend on the PWD. It depends on its own directory.
Change-Id: I61e95018154a75e0e0d795ee801068e18870a5df
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A macro name ending in R might expand to a string; if this precedes a
string constant, we're juxtaposing the strings. My first parser for
raw strings would mistake it for a raw string instead, ignoring the
part of the identifier before R. Re-worked the exploration of what
came before the string to catch these cases, too.
The backwards parsing would also allow any messy jumble of [RLUu8]* as
prefix for the string; but in fact R must (if present) be last in the
prefix and *it* can have at most one prefix, [LUu] or u8. Anything
else is an identifier that happens to precede the string. Reworked
the parsing to allow only one prefix and not treat R specially unless
it's immediately (modulo BSNL) before the string's open-quotes.
Add link to the cppreference page about string literals, on which the
grammar now parsed is based.
Added a test for the issue this addresses.
Verified that this fails on 5.6, dev and 5.9 without the fix.
Expanded the existing test to cover R-with-prefix cases.
Task-number: QTBUG-55633
Change-Id: I541486c2ec909cfb42050907c84bee83ead4a2f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When calling resize() from showEvent(), we'd set the full geometry
on the widget's QWindow. This resulted in the top-level window
being moved to the top-left corner, even though no other call to
move() or setGeometry() had happened before.
The solution consists on calling the proper QWindow methods depending
on whether setGeometry_sys() is called for a move, a resize or both.
Furthermore, this needs QWindow::resize() to set its position policy
to frame-exclusive. The documentation states that is already the case
and we're setting the full geometry on the platform window, so we need
to convey that bit of information.
This also solves the age-old conundrum: "### why do we have isMove as
a parameter?"
Change-Id: I2e00fd632929ade14b35ae5e6495ed1ab176d32f
Task-number: QTBUG-56277
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Speeds up testing by a factor of 2.
Task-number: QTBUG-61827
Change-Id: I9d6c9d9786d35af3083bc7e98beb9a79dbcc7e11
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Unsetting the SOFTWARE environment variable will force lpstat to use
English for the output, so we can ensure that the test will pass
regardless of the language used for the machine.
Change-Id: Iddf5e8aadaa546ae3e0dd172df84e4e43ee02c2a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Introduce helper function which uses a number to build
unique names. Remove helper for deleting files since it
now uses a temporary directory. Add a few cases
that were overlooked in 88c68f4d9e.
Task-number: QTBUG-61827
Change-Id: I53355f99ffc3bfe6ad6994a5439710c9fa8cdad5
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
That means a file is never created, unless you ask for the name. There's
no chance of left-over temporary files being left behind. QSaveFile also
benefits from this, since the save file is not present on disk until
commit(). Unfortunately, QSaveFile must go through a temporary name
because linkat(2) cannot overwrite -- we need rename(2) for that (for
now).
[ChangeLog][Important Behavior Changes][QTemporaryFile] On Linux,
QTemporaryFile will attempt to create unnamed temporary files. If that
succeeds, open() will return true but exists() will be false. If you
call fileName() or any function that calls it, QTemporaryFile will give
the file a name, so most applications will not see a difference.
Change-Id: I1eba2b016de74620bfc8fffd14cc843e5b0919d0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Has become flaky on CI. Does not fail locally.
Change-Id: I42938849571938db78b16a72c215442a69f7c2d5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This test sets up two timers:
- a 100ms recurring timer
- a series of 10 200ms single-shot timers.
After quitLock lets exec() return it then uses a signal
spy to check if the 100ms timer fired at least 17/20
of the times it should.
However there is no guarantee that the 100ms timer
will fire more often than the 200ms timer. If the
native timer callbacks happen at 500ms intervals then
Qt will fire both timers (once) at that interval.
In practice this seems to happen on macOS CI under
system load and/or with the test app napping.
The primary goal for the test is to verify that exec()
returns when it should; we can remove the timer signal
spy.
Remove testQuitLock from BLACKLIST.
Timely timer:
524429311.389913 runLoopTimerCallback
524429311.389979 200ms fire
524429311.389997 100ms fire
524429311.490056 runLoopTimerCallback
524429311.490130 100ms fire
524429311.589752 runLoopTimerCallback
524429311.589929 200ms fire
524429311.589976 100ms fire
Delayed timer:
524429428.690887 runLoopTimerCallback
524429428.691002 100ms fire
524429428.691143 200ms fire
524429433.692103 runLoopTimerCallback
524429433.692205 100ms fire
524429433.692331 200ms fire
Change-Id: Iff4faaa1de3741cf4e217949d5ed17d4e70c6af2
Task-number: QTBUG-61499
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The only reason our code wants PKCS12 files is for a private key, but
a valid file needn't contain one; and reading a file without lead to a
crash in QSslKeyPrivate::fromEVP_PKEY(). So check for missing key and
fail the load, since the file is useless to us. Also ensure the
caller's pkey is initialized, as we aren't promised that
PKCS12_parse() will set it when there is no private key.
Add a test for this case (it crashes without the fix) and update the
instructions for how to generate test data to cover it also.
(Corrected the wording there, too; at the interactive prompt,
"providing no password" really provides an empty password.)
Task-number: QTBUG-62335
Change-Id: I617508b903f6d9dee40d539b7136b0be8bc2c747
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Although the window is refused input for the most part from the system,
it does not act like that it is blocked by the application modal dialog.
This ensures that it is the case and prevents things like being able to
double click on the title bar to maximize the window on Windows.
Task-number: QTBUG-49102
Change-Id: If1582819b90cb2ec9d891f664da24f13bfec7103
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Added binary compatibility files for Qt 5.9.0.
'QOpenGLExtraFunctionsPrivate::Functions' and
'QOpenGLExtraFunctionsPrivate' have been blacklisted in
qtqa/tests/postbuild/bic/tst_bic.cpp, because those give false
positive fail in the binary compatibility tests.
Change-Id: I2231daef61a0c4677af36c85575b8dcd81070d44
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLineEdit with a mask does not return empty fields with the
ImSurroundingText query. This is a problem for the input
context that is not aware of the mask and relies on the
fact that the cursor position never exceeds the boundaries
of the surrounding text.
This change fixes the issue by returning unmasked text with
the ImSurroundingText query.
[ChangeLog][QtWidgets][QLineEdit] Fixed behavior of the
ImSurroundingText query. Previously, it returned a masked
text whose length may be less than the cursor position.
Now it returns unmasked text, so the text length is always
greater than or equal to the cursor position.
Task-number: QTBUG-60319
Change-Id: I1c8009164836a1baa2e3a45958bf1ea5fa9be38d
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
On BSD systems (tested on macOS and FreeBSD), you *can* lseek(2) or
ftell(3) on a pipe and get its current position. But QFile will not get
the position when the file is sequential, so we need to return 0.
Technically speaking, we ought to do the same for block devices, but if
you're redirecting stdin, stdout or stderr in the unit test to or from a
block device, you deserve the extra work to add that yourself to the
test.
Change-Id: I3868166e5efc45538544fffd14d8a74e92963fe7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
If a QFileInfo was constructed with an empty path, which could happen
with QFileInfo(QFile()) or via QDir, etc., then it would issue system
calls to empty paths and could even produce warnings. This commit makes
am empty path name be the same as a default-constructed QFileInfo and
corrects the use if 0 for ownerId and groupId to match the
documentation.
[ChangeLog][Important Behavior Changes] QFileInfo on empty strings now
behaves like the default-constructed QFileInfo. Notably, path() will now
be the empty string too, instead of ".", which means absoluteFilePath()
is no longer the current working directory.
Change-Id: I8d96dea9955d4c749b99fffd14ce34968b1d9bbf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
The test verifies that a cookie with a date in the future is not
"expired" and will be sent to the server. This test started failing
on August 7th 2017 when the test case "0003" with it's cookie expiring
August 7th 2017 started ... expiring ;-)
Bumped all suspicious cookie test cases by a hundred years.
Change-Id: I7c09069ec4999e2ea0aae7b2a2819cced0fd6a99
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The blacklisting is not needed anymore as we now use -qt-harfbuzz.
This reverts commit b36e5faad4.
Task-number: QTQAINFRA-1363
Change-Id: I3ae50588204b27e6880416ae2cbc28dda53bb292
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
In Qt, we have QTextOption::tabStop, QTextEdit::tabStopWidth and
QPlainTextEdit::tabStopWidth.
Neither are very good names, since the tab stop is neither a
numerical value as in the former, nor does it have any dimensions
that can be measured, as in the latter. Vertical text advances
may also be supported by Qt at some point in the future, at
which point the name would make even less sense.
At the same time, we expose the actual type of the tab stop
distance as floating point in the QTextEdit and QPlainTextEdit
API instead of always rounding it to an int.
To avoid duplicating either of these APIs in Qt Quick, we
introduce tabStopDistance as the common term instead and deprecate
the old names.
[ChangeLog][Text] Introduced tabStopDistance property in
QTextOption, QTextEdit and QPlainTextEdit as replacement for
the inconsistently named tabStop and tabStopWidth properties.
QTextOption::tabStop, QTextEdit::tabStopWidth and
QPlainTextEdit::tabStopWidth have subsequently been deprecated.
Change-Id: Ib7e01387910cddb58adaaaadcd56c0e69edc4bc2
Reviewed-by: Paolo Angelelli <paolo.angelelli@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The Unix stat fields "st_ctime" and "st_ctim" mean "change time", the
last time that the file/inode status fields were changed. It does not
mean "creation time". So this commit splits all of the internal API to
"birth" and "metadata change" instead of "creation" to avoid the
conflict.
Change-Id: I149e0540c00745fe8119fffd1463fe78b619649e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
[ChangeLog][QtCore][QFileInfo] Deprecated created() because it could
return one of three different file times depending on the OS and
filesystem type, without the ability to determine which one is which. It
is replaced by metadataChangeTime() and birthTime().
[ChangeLog][QtCore][QFileInfo] Added QFileInfo::metadataChangeTime(),
which returns the time the file's metadata was last changed, if it is
known, and falling back to the same value as lastModified() otherwise.
On Unix systems, this corresponds to the file's ctime.
[ChangeLog][QtCore][QFileInfo] Added QFileInfo::birthTime(), which
returns the file's birth time if it is known, an invalid QDateTime
otherwise. This function is supported on Windows and on some Unix
systems.
Change-Id: I0031aa609e714ae983c3fffd1467bd8b3e3a593d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Added flowId='name' to each message when using TeamCity logging format.
This is necessary to distinguish separate processes running in parallel.
[ChangeLog][QtTest] Added flowId to messages when logging in TeamCity
format. FlowId is used to distinguish logging from multiple processes
running in parallel.
Change-Id: I7f5046c1058ff02770404caa2c9b3a5398f97f6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is required so that one can use QSettings in situations that
temporary files or renaming may not work.
[ChangeLog][QtCore][QSettings] Added setAtomicSyncRequired(), which
allows one to use QSettings with config files in unwriteable directories
or in Alternate Data Streams on NTFS on Windows. This used to work
before Qt 5.4, but remains a non-default behavior due to the potential
of data corruption.
Task-number: QTBUG-47379
Change-Id: I81480fdb578d4d43b3fcfffd14d4f77112f0402f
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
We can't use MoveFile to do atomic commits on an ADS, so QSaveFile needs
to detect when the target name is ADS and then use the direct fallback
mode.
[ChangeLog][QtCore][QSaveFile] Saving to Alternate Data Streams on NTFS
on Windows is now possible, but requires setDirectWriteFallback(true).
Task-number: QTBUG-47379
Change-Id: I81480fdb578d4d43b3fcfffd14d4bc062ae1750d
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
So we can use it in QTemporaryFile, QTemporaryDir and QFile::rename()
[ChangeLog][QtCore][QTemporaryDir] The class now supports the "XXXXXX"
replacement token anywhere in the template, not just at the end. This
behavior is similar to what QTemporaryFile supports.
Change-Id: I1eba2b016de74620bfc8fffd14ccb645729de170
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A nullptr QVariant should become a null QString or QByteArray,
since null strings have previous in our APIs represented the null value
in the absence of a dedicated null metatype.
Change-Id: I3b8f6386ece314d7c196959fbcf042c4fe0508a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Based on a test-case from Israel Lins Albuquerque, that my planned
fixes to our parsing of ISODate date-times would break.
Change-Id: I5658df9c7daed59d43aa5574df25d4d9eac4677d
Reviewed-by: Israel Lins Albuquerque <israelins85@yahoo.com.br>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Actually check that there's a T where ISO 8601 wants it (instead of
just skipping over whatever's there), with something after it; move
some declarations later; add some comments; and use the QStringRef API
more cleanly (so that it's easier to see what's going on). Simplify a
loop condition to avoid the need for a post-loop fix-up.
This incidentally prevents an assertion failure (which brought the
mess to my attention) parsing a short string as an ISO date-time; if
there's a T with nothing after it, we won't try to read at index -1 in
the following text. (The actual fail seen had a Z where the T should
have been, with nothing after it.)
Add tests for invalid ISOdate cases that triggered the assertion.
Change-Id: Ided9adf62a56d98f144bdf91b40f918e22bd82cd
Reviewed-by: Israel Lins Albuquerque <israelins85@yahoo.com.br>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I was mistaken before, the "es" part for that version isn't optional, it
*must* be omitted.
Change-Id: I9e83d2317523fb0a905e40b95a56033cf693b93b
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
Changes the QVariant::isNull() implementation for
pointer types so they return true if null.
[ChangeLog][QVariant] QVariants containing pointers will now return
true on isNull() if the contained pointer is null.
Change-Id: I8aa0dab482403837073fb2f376a46126cc3bc6b2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore] Added qEnvironmentVariable, which returns the value
of an environment variable in a QString, while qgetenv continues to be
used to return it in a QByteArray. For Unix, since most environment
variables seem to contain path names, qEnvironmentVariable will do the
same as QFile::decodeName, which means NFC/NFD conversion on Apple OSes.
I opted not to #include <qfile.h> from qglobal.cpp to implement that
QFile::decodeName functionality, so qglobal.cpp doesn't depend on
corelib/io and to avoid possible recursions.
Task-number: QTBUG-41006
Change-Id: I14839ba5678944c2864bffff141794b8aaa7aa28
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test fails when the system harfbuzz (version 1.3.2) is installed.
Change-Id: Id18a5a3c503f64ef56567d71655e433a46908b3f
Task-number: QTQAINFRA-1363
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The test fails when the system harfbuzz (version 1.3.2) is installed.
Change-Id: Id18a5a3c503f64ef56567d71655e433a46908b3f
Task-number: QTQAINFRA-1363
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
If in a slot connected to QAbstractItemView::clicked
QAbstractItemView::setModel(nullptr) is called the method
QAbstractItemView::mouseReleaseEvent will cause a segmentation fault.
The problem is that the method QAbstractItemView::model used in
QAbstractItemView::mouseReleaseEvent will return a nullptr if a null
model was set. The solution is to used d->model since it is always a
valid model. (See line d->model =
(model ? model : QAbstractItemModelPrivate::staticEmptyModel());
in method QAbstractItemView::setModel)
Change-Id: I6f01bdeac64495ee4a76adcc7bf8da8a7719ef4d
Reviewed-by: David Faure <david.faure@kdab.com>
- Determine window sizes according to screen size and turn off
scrolling.
- Center the window to get it out of the way of taskbars.
- Make the window top-most.
- Turn off scaling so that coordinates passed to the QWindow
child match device coordinates and the child is positioned
correctly.
- Make the child window a yellow raster window for easier
debugging.
Task-number: QTBUG-45956
Change-Id: I05864770f8ed638d0a36f3e3f2afed73d2952436
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
These tests need fixing, but they are already partially blacklisted
and need investigation once the switch is completed.
Task-number: QTQAINFRA-1292
Task-number: QTQAINFRA-1355
Task-number: QTQAINFRA-1362
Change-Id: Ic50d0c4a01ee7e72be1129d418eff244ba783185
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This test fails on Windows 10 x64 Creators Update CI builds for unknown reasons.
Change-Id: I766bccfd4dea9ea195c68403018b419e800a7b3b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
tst_qgraphicswidget::checkReason_ActiveWindow fails on Windows 10
Creators Update. Added expect fail for Windows platform.
Task-number: QTBUG-62244
Change-Id: I71868a496659e7136af9a5b74684ba39edaf03ae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This workaround was created to make tst_qfocusevent test pass on Windows
10 x64 Creators Update.
Task-number: QTBUG-61467
Change-Id: I63eb149ae850174fb5de99761a6001e000a151a2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
don't try to execute a binary from the install dir.
amends 8e776d39f.
Change-Id: I37990bc83b295379f0c93f4ca712e1bbf980fd44
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The store is using QSettings under the hood. A user can enable/disable
storing HSTS policies (via QNAM's setter method) and we take care of
the rest - filling QHstsCache from the store, writing updated/observed
targets, removing expired policies.
Change-Id: I26e4a98761ddfe5005fedd18be56a6303fe7b35a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Allows setting the stack size for the thread pool
worker threads. Implemented using QThread::stackSize.
Task-number: QTBUG-2568
Change-Id: Ic7f3981289290685195bbaee977a23e0c3c49bf0
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Update documentation to be clearer on the special null variant state
with no value as opposed to a variant with a null value, and only block
conversions of the former.
Change-Id: I24fd50285414e049de87de54a63700a89bd5adf1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The image appears to be 128x128. Fixes test failures
FAIL! : tst_QImageReader::readFromResources(rect.svg) Compared values are not the same
Actual (image.size()): QSize(128x128)
Expected (size) : QSize(105x137)
.\tst_qimagereader.cpp(1493) : failure location
FAIL! : tst_QImageReader::readFromResources(rect.svgz) Compared values are not the same
Actual (image.size()): QSize(128x128)
Expected (size) : QSize(105x137)
which likely do not show in the CI since the qtsvg module is not
available when checking only qtbase.
Change-Id: I84ebdde6f2251f56a00f16a54bd20d0c2b23638e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When creating the statements, it is now possible to pass a list of
enabled layer names. Every node or edge which is not in the list of
enabled layers will be pruned from the graph prior to traversal. Note
that an empty layer list for a node or an edge means it is on all
layers.
Change-Id: I61a4df7d395b4beb42ee55ce08fef8ebe04263c9
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
In particular, go through QMetaType/QMetaEnum to deal with enums.
Change-Id: I2e847ba328eb46609b86b3dfd6c4dbf532d78b7d
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
In particular, go through QMetaType/QMetaEnum to deal with enums.
Change-Id: Idbe16c913c1d471a4a91d219f77876e498c192d9
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Commit 9e64fc9e1c caused a regression
which stored all QDateTime entries as if they were in localtime,
which causes them to be offset by the amount of local timezone
offset. This is fixed by adding "Z" if the time should be in UTC or
using "+/-hh:mm" if it should use fixed UTC offset or specific
timezone.
Task-number: QTBUG-57138
Change-Id: Ie60905dfb3a517db442b636ca41daf8348753d84
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Check we do handle DST after epoch and don't before.
Check we do notice various unusual transitions.
Check we do handle non-whole-hour-offset zones.
(Unfortunately, MS-Win lacks data for some of the zones and is wrong
about the two date-line crossers, so we skip those for it.)
Change-Id: If420d61b9db7f914ca25c22297c16e917ad2307a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWinEventNotifiers were limited to 62 instances, because of
WaitForMultipleObject's limitation to MAXIMUM_WAIT_OBJECTS - 1 handles.
Use the RegisterWaitForSingleObject API which does not have this
restriction and executes waits in threads managed by the system. A
central manual reset event per event dispatcher is signaled in the
RegisterWaitForSingleObject callback and waited for in the event loop.
Task-number: QTBUG-8819
Change-Id: I3061811c18e669becf9de603bbdd7ba96e4d2fcd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When ::WSAIoctl() reports 1 byte available for reading, we are trying
to peek an incoming datagram to ensure that the data is actually
delivered. But, according to MSDN docs, we are not allowed to pass NULL
as 'lpNumberOfBytesRecvd' parameter to ::WSARecvFrom() call, if
'lpOverlapped' parameter is also NULL.
The case with an empty datagram is fixed accordingly.
Change-Id: Id13038245332d3fb4bc18038d44a7cfd7ce04775
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Split the test in two: one test that requires the symlinks
and test files and one that does not need them.
In the test with test files, verify each step and the deletion
of the files.
Task-number: QTBUG-58654
Task-number: QTBUG-50835
Change-Id: I14de57ce7a1df2d834d5a7565c804dead1d89088
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test is just wrong.
It suggests, that it tests minimal block size,
but in reality it is checking if a maximal peak of block size
is bigger then expected minimum block size.
The minimal block size is 1, not 1024 / ideal threads count and
it is defined in BlockSizeManagerV2.
The maximal block size is defined and it is fixed, but it is an
implementation detail, probably not worth testing.
The test is based on a race condition as peakBegin and
peakBlockSize are modified in parallel from multiple threads,
without any synchronization.
Change-Id: I430eedcf83b0fa3e2ce2cfd294eaee7b301e48ae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This needs a zone with transitions near the epoch; and the only CET
with DST that winter was Italy (copied by Malta), for which the Olson
database had a recent (2016) correction to its data, for that winter.
That means we get inconsistent results on O/Sen of different ages.
So add a separate testEpochTranPrivate(), alongside testCetPrivate(),
and test it with America/Toronto. (Unfortunately, MS-Win gets the
date wrong on the first transition after the epoch, so we have to code
round that.)
Since information before the epoch isn't reliably available, only test
the search backwards if nextTransition does find something before it.
(We can safely assume all real transitions happened since 1601;
non-celestial time-keeping wasn't accurate enough, before that, for
anyone to synchronize with anything but celestial time.)
Change-Id: I984b46938a2805b93bb2afd6855e317b5d66b386
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Found while working on suppressing the warning about the return value
(which is either 0 or -1) was being ignored.
Task-number: QTBUG-61968
Change-Id: I02d22222fff64d4dbda4fffd14d148b1724547ca
Reviewed-by: Florian Bruhin <qt-project.org@the-compiler.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Passing a null pointer as a parameter to the setChild function no
longer crashes when calling the
QStandardItemModelPrivate::itemChanged signal. The child is removed
from the model.
The patch also fixes the behavior of deleting a item. A
dataChanged signal is emitted.
Change-Id: I027e8b0d84fe33c5fca056df870f0e60a020824b
Reviewed-by: David Faure <david.faure@kdab.com>
This reverts commit 346cd79192. The bug
report was incorrect, since the suggested file name is actually valid,
it just happens to name an Alternate Data Stream (ADS) "20:803Z.txt" in
file "testLog-03".
[ChangeLog][QtCore][QFile] Reverted an incorrect change from Qt 5.9.0
that forbade the creation and access to Alternate Data Streams on NTFS
on Windows. This means that file names containing a colon (':') are
allowed again, but note that they are not regular files.
Task-number: QTBUG-57023
Change-Id: I81480fdb578d4d43b3fcfffd14d4f2147e8a0ade
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The test is marked as expected failure for the last 3 years, in CI it
is proven to be somehow flaky and it is failing now because of XPASS
which is not covered by blacklist feature.
This patch extends efforts of 7eba6d039d
and 03b4838cb5 by blacklisting the test
completely.
Change-Id: Ia295d61620fa6bc97b168d4de9456a18ed5c064f
Task-number: QTQAINFRA-1333
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In the past, we had an undocumented text flag that worked with
one of the QPainter::drawText() overloads. This was never intended
as public API and served a specific cause in Qt WebKit at one point.
But there is a general need for such API, as disabling shaping features
easily gives 25% performance improvement on text rendering even for
fairly short strings.
This patch adds a new style strategy flag to disable shaping and
will just uses the CMAP and HDMX tables to get glyph indices and advances
for the characters. In Qt 6, the TextBypassShaping flag can be removed
completely and be replaced by the style strategy.
[ChangeLog][QtGui][Text] Added QFont::PreferNoShaping style strategy to support
improvements to performance at the expense of some cosmetic font features.
Task-number: QTBUG-56728
Change-Id: I48e025dcc06afe02824bf5b5011702a7e0036f6d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Currently QLocale::c().bcp47Name() returns "C" which, according to [BCP47], is
not a valid language tag. In particular it does not conform to the ABNF grammar
in section 2.1 which specifies a minimum length of 2 characters for all language
tags.
[BCP47]: https://tools.ietf.org/html/bcp47
This patch changes the return value to "en" seeing as the documentation for
QLocale::Language states that the C language is identical in behavior to
English.
Task-number: QTBUG-61949
Change-Id: I2a381def8fb7156467e01d105da92bb1f4821204
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When QCOMPARE(,) reports two 12-digit numbers, it's not always
immediately obvious what the difference is (much less what 1/3600000
of it is); nor is it obvious that (or why) a given 12-digit number is
in fact correct. In contrast, our eyes can make sense of a
QDateTime's reported value quite well, enabling us to see what's
different; and it's possible to at least confirm the plausibility of
2-or-3 am on a spring or autumn day at a plausible transition (or even
to confirm it exactly by consulting suitable web-sites). Also
document the actual transition happening in each case (since I *did*
consult a suitable web-site). So prefer to QCOMPARE(,) two QDateTime
values instead of two 12-digit qint64s.
Where a that would be unsuitable, at least compare the difference to
zero, to make the error easier to understand (except when one of the
twelve-digit numbers consists entirely of 9s; that, for once, actually
is easy to see).
Write various multiples of 3600 as the relevant intelligible whole
number times 3600, rather than premultiplying, to make it obvious to
reders what's going on.
None of this changes what is actually tested.
Change-Id: I488e751283a55d4623c93612af13ad631144900d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A loop initialized i = 0 and used i > 2 as its condition; it didn't
get very far. Consequently, the test it was in never checked whether
CET's 2011 transitions happened at the times expected - which they
didn't, as the times in question were in fact the times at which
Pacific/Auckland had its transitions that year.
Change-Id: I94d1f8df615c5bcfe48e73d41b4c7faf2beccb96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The original test is quite unfortunate - it has cipher names hardcoded,
and it fails with OpenSSL 1.1 - no matching cipher found for 'RC4-SHA'
and QSslContext::initSsl fails with 'Invalid or empty cipher list'.
We skip this test entry for 1.1.
Change-Id: I810b80a62d9e27a60db71fd412af0c80630d976c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Moving the cursor is not synchronous.
Change-Id: I6b820af026585e1fcfef845cc712fa8f6812e941
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Make QVariant::toJsonValue do conversions as well as
QJsonValue::fromVariant.
Change-Id: I175d43677061470691e2e0104a800be355fbbd3d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
internalInsert() will set the cursor to the right position which accounts
for any input mask set on the control as well. Therefore it will already
be placed at the next correct position and should not be changed again
after that.
Task-number: QTBUG-40943
Change-Id: Ic0f5fad6999ddd367e435ec4409a5db5b9eacb7b
Reviewed-by: Daniel Teske <qt@squorn.de>
Reviewed-by: David Faure <david.faure@kdab.com>
Change-Id: Id220f10f4ff756230155c7c8f37713d53ed3ca0c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's flakey/failing on macOS, the menu is opened but opened above
the button, so the intersection test fails.
Change-Id: I6b13a1b0df2b07fa36bbb73071cdeb55547ac93a
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
...tst_qlineedit.cpp:1938:9: warning: explicitly assigning value of variable of type 'Qt::Key' to itself
-Wself-assign]
key = key;
~~~ ^ ~~~
Change-Id: I18a46f61e13f6e2c74edce869a1c36a7f3a0fb70
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Counting draw calls in the style is not a reliable way to count
italic items in the combobox.
Task-number: QTBUG-62080
Change-Id: I6cb6d54535f073f66cfcf61bb19eb645284c835d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don't assume signals will not be emitted during show. The test should
focus on testing that changing the model results in change signals. What
happens before that is not under test, and not stable.
Change-Id: I71e62abc15fc81c069d7685e4342e795449c3632
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This hasn't done anything since at least Qt 5.0. It's possible it was
only used in Symbian, which we removed before the 5.0 release. This only
served to make the tst_QNetworkProxyFactory test slow.
[ChangeLog][QtNetwork][QNetworkProxy] The functions related to
QNetworkConfiguration are deprecated. They've performed no action since
Qt 5.0, so code using them can safely stop doing so.
Change-Id: I84e45059a888497fb55ffffd14d31b7c2978a04e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
It's failing when enabling synchronous expose events, but likely
due to making assumptions about expose behavior. Will be looked
at in more detail once the expose event patch is in, so we can
move forward.
Task-number: QTBUG-62092
Change-Id: Ie76b5f11ccf841981a42d2eda19fbcda8b43c36c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Getting the end position of the selection was not possible.
[ChangeLog][QtWidgets][QLineEdit] Added selectionEnd(), selectionLength(),
complementing selectionStart().
Change-Id: Iaecc624063d7c043f9502351f07eb76f869e86f1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Fixes flakiness where we enter and exit window states too fast on macOS,
while also removing 2 second waits in the positioning tests that were
slowing things down needlessly.
Change-Id: Ia4ee4d4812474c520fdd3f76b047f4eabe1a8220
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
They fail when enabling synchronous expose events. Disabled for now
until we can look into why, but it's assumed to be an issue with the
test harness/how we hook into Quartz to send/observe events.
Task-number: QTBUG-62042
Change-Id: I723d049ec5d1029edb0ad3b1f47fffc829a8924b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
