It is lossy, so should be requested explicitly, using a dedicated
fromPixmap factory function.
Deprecate the constructor and assignment operator, and make the
constructor explicit.
[ChangeLog][QtGui][QBitmap] Implicitly constructing and assigning
to a QBitmap from a QPixmap has been deprecated, and the respective
constructor has been made explicit. Use the fromPixmap factory
function instead.
Change-Id: I68ce85b26c901415137b664a1db687021d48bae0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QToolButton::initStyleOption is const. Apply some DRY while at it.
Change-Id: If29a52e828bbc2aa58df2852c4c434545acfef3e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Adjust to changes to QIcon::pixmap, QMetaType::type, and
QAbstractItemView::itemDelegate.
Change-Id: I9eb0331ef899131afc86c33f27feeee76331ffc8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
qt_add_test supports now QT_TEST_SERVER_LIST, which will add the test
servers as docker test fixtures.
The docker server will be started before the test is run, and stopped
after the test is run.
Running the tests in parallel is not supported.
Docker tests are currently only supported on Linux hosts.
Task-number: QTBUG-85034
Change-Id: If3cefe05c5dec19c14b05d2fa8b01a0b6d95e259
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change the rounding of negative half values to match standard C++
round, this will also allow future optimizations.
Change-Id: I8f8c71bed1f05891e82ea787c6bc284297de9c5c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When QCoreApplication object is instantiated, creation of the internal
message window is delayed until QEventDispatcherWin32::processEvents()
is called or socket/event notifier is registered. But, if the user uses
a native event loop, posted events are not delivered and timers do not
work.
This problem was fixed in a4ac4b3263 for
QWindowsGuiEventDispatcher in the same way. So, the risk of regression
is minimal.
Change-Id: I7bbb721d96046f64d21a7b0e553e46798b37189c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
In 4e400369c0 we began to send synth-mouse
events from the touch device, but in the opposite direction it was not
consistent.
Add autotests to prove that it's consistent both ways now.
Change-Id: I7df2328fef224dc1529ca5d27411cd8a5a9c8df9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This functionality was only in Qt Quick in Qt 5. Now we move it up to QtGui
so that every QEventPoint will have a valid velocity() before being delivered
anywhere.
[ChangeLog][QtGui][QPointerEvent] Every QEventPoint should now carry a valid
velocity(): if the operating system doesn't provide it, Qt will calculate it,
using a simple Kalman filter to provide a weighted average over time.
Fixes: QTBUG-33891
Change-Id: I40352f717f0ad6edd87cf71ef55e955a591eeea1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QQuickEventPoint instances were very long-lived and got reused from one
event to the next. That was initially done because they were "heavy"
QObjects; but it also became useful to store state in them between
events. But this is in conflict with the ubiquitous event replay
code that assumes it's OK to hold an event instance (especially
a QMouseEvent) for any length of time, and then send it to some widget,
item or window. Clearly QEventPoints must be stored in the QPointerEvent,
if we are to avoid the need for workarounds to keep such old code working.
And now they have d-pointers, so copying is cheap. But replay code
will need to detach() their QEventPoints now.
QEventPoint is useful as an object to hold state, but we now store
the truly persistent state separately in an EventPointData struct,
in QPointingDevicePrivate::activePoints. Incoming events merely
update the persistent points, then we deliver those instead.
Thus when event handler code modifies state, it will be remembered
even when the delivery is done and the QPA event is destroyed.
This gets us a step closer to supporting multiple simultaneous mice.
Within pointer events, the points are moved up to QPointerEvent itself:
QList<QEventPoint> m_points;
This means pointCount(), point(int i) and points() can be non-virtual.
However in any QSinglePointEvent, the list only contains one point.
We hope that pessimization is worthwhile for the sake of removing
virtual functions, simplifying code in event classes themselves, and
enabling the use of the range-for loop over points() with any kind of
QPointerEvent, not just QTouchEvent. points() is a nicer API for the
sake of range-for looping; but point() is more suited to being
non-const.
In QML it's expected to be OK to emit a signal with a QPointerEvent
by value: that will involve copying the event. But QEventPoint
instances are explicitly shared, so calling setAccepted() modifies
the instance in activePoints (EventPointData.eventPoint.d->accept);
and the grabbers are stored separately and thus preserved between events.
In code such as MouseArea { onPressed: mouse.accepted = false }
we can either continue to emit the QQuickMouseEvent wrapper
or perhaps QEvent::setAccepted() could become virtual and set
the eventpoint's accepted flag instead, so that it will survive
after the event copy that QML sees is discarded.
The grabChanged() signal is useful to keep QQuickWindow informed
when items or handlers change exclusive or passive grabbers.
When a release happens at a different location than the last move event,
Qt synthesizes an additional move. But it would be "boring" if
QEventPoint::lastXPosition() accessors in any released eventpoint always
returned the same as the current QEventPoint::xPosition()s just because
of that; and it would mean that the velocity() must always be zero on
release, which would make it hard to use the final velocity to drive an
animation. So now we expect the lastPositions to be different than
current positions in a released eventpoint.
De-inline some functions whose implementations might be subject to
change later on. Improve documentation.
Since we have an accessor for pressTimestamp(), we might as well add one for
timestamp() too. That way users get enough information to calculate
instantaneous velocity, since the plan is for velocity() to be somewhat
smoothed.
Change-Id: I2733d847139a1b1bea33c00275459dcd2a145ffc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test was previously using int; I shall be wanting to add tests
that exercise the bounds of qint64. Clean up the layout of the
test-row additions in the process of making a trivial change to them
all. Also const the QFETCH() types so we catch any use of non-const
methods on the values fetched.
Change-Id: I4b0187de71f5f14b39b4eabe8afd12a196f73d23
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of using imprecise QTest::qSleep() to estimate the
elapsed time, we trigger a single shot PreciseTimer and
gather all the data in lambda. We wait for lambda to be
executed - we give it twice as much time as is in theory
needed. Afterwards we verify all the data collected in lambda.
Task-number: QTBUG-82903
Change-Id: I0147b7cd2aaf4bf58a216caff167d2db8712541a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Some CMake files currently assume that QtGui is always enabled and we
get a configure-time failure without these changes.
Task-number: QTBUG-86053
Change-Id: I28e32c180c32221f32519017bac6b518a19d5983
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The qfilesystemmodel.pro was recently moved to the gui tests subfolder,
but it uses widgets inside. Skip it in a no-widgets build.
Amends fb9ec8ad44
Task-number: QTBUG-86187
Change-Id: I955556ffddad483d4c25602ae126b8c2433091b2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This requires refactoring of QMetaSequence, as they share a lot of
common functionality. QMetaAssociation provides a low level interface to
an associative container.
Task-number: QTBUG-81716
Change-Id: I273e00abd82f1549ba8803c323d82aa3a2d12ded
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amends f9940b15f7, which
amended 6e1d70ae12.
The bevel of the button is not defined by the contentsRect, but by the
borderRect that the stylesheet style calculates.
Change-Id: I9a0d5bf29a06ce2270014f0d144e33cc3a1a7473
Pick-to: 5.15
Fixes: QTBUG-86587
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
test.bjon file doesn't exist, however, it's still included in json.qrc.
That causes the test to fail on Android because it's using that resource
file.
Change-Id: I1e93076069073a1a621459a7d90aec5c0c03f768
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The macro BACKTRACE_HELPER_NAME is defined inside a block with
#ifdef __GLIBC__ which is not defined on Android, thus causing the test
to fail on Android.
Change-Id: I55e9b3e3bae2da182481239ad88107c36e3bd438
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This was overlooked when doing the conversion to use UTF-8 as the
standard 8 bit encoding for text.
Fixes: QTBUG-54942
Change-Id: Ib7b1b75b4d694648ab7143f6930b6bb1dcad19c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It has been deprecated and will live in qt5compat from now on.
Fixes: QTBUG-86480
Change-Id: I3744c7cee058d51d0fce633a174ab1a0f9235d2c
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
The seconds and milliseconds default to 0; so omit them when they're
zero, unless there's nearby code that contrasts nicely with them.
Change-Id: Iea049015e976f5a5209fe87a2cbfdae9de49a559
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Certain servers, like smtp.live.com, will send a request for a
certificate even though they don't require one. In Schannel this
manifests as a warning/info status (SEC_I_INCOMPLETE_CREDENTIALS).
In the cases where it's not needed we should suppress the warning and
try to connect anyway, which is done by calling
InitializeSecurityContext again when we get the status.
Pick-to: 5.15
Change-Id: I3c48140f2949d8557251a49a2b66946da9395736
Reviewed-by: Joshua GPBeta <studiocghibli@gmail.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
These were now always defined, hence redundant.
Leave the #define in place so that we can verify we actually do always
define it, in a #else of an existing #if check on it.
Change-Id: Iea4c3dbc8f9982268bcf81da5ef17fe2ebf5c462
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTime() is invalid. Only the seconds and milliseconds are optional,
for valid times. Use startOfDay() for zoned times, QTime(0, 0) for
fixed-offset ones.
Change-Id: I3b65d5c3733ac83dc3a6c214859c3f56a480bb94
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Nothing used defDateTime(), nothing but it used defTime(). The only
other use of defDate() were from one test, which might as well make it
a local variable.
QDateTime's default is invalid, making invalidDateTime() redundant,
and the invalidDate() and invalidTime() it called had no other users.
Change-Id: I0e07ee58478bfe8ba680eafb52e2f73a962edd33
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since an EXECUTE BLOCK statement can have a mix of ? and :var syntax
then a special case for this needs to be added so that it does not try
to convert the :var parts into positional placeholders as they need to
kept as-is when preparing such a statement.
Pick-to: 5.15
Fixes: QTBUG-83152
Change-Id: Iff891207ad6dea1681a1b3a335acbbbb668b465d
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
As per ### Qt6 comment. Also rename the LibraryLocation enum
to LibraryPath.
Change-Id: I556025a19c5bcdf2ff52598eaba32269522d4128
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We were starting to run out of space for builtin core types.
Remap the type id's to create lots of additional space.
We now reserve the first 64k id's for Qt, and have 16k id's for
Qt Core. That should hopfully be enough for a while ;-)
Fixes: QTBUG-85914
Change-Id: I0dab6bf23652e46a9557d9b38af7990b68c572b6
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
They were disabled in ad0e3e26fa,
but that was probably accidental.
Change-Id: Ia9cbccfbeecfe84768c3465f5699ed44b7f932a5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Provide functionality to add and remove values, so that you can use a
sequential iterable as stack or queue if the underlying container
supports this. To this end, provide a way to specify whether the
value should be added or removed at the beginning or the end of the
iterable.
Change-Id: If63d302f3ca085e56d601116ce4dfaa6b94a0c4f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For completeness' sake we should expose this. The iterators provided by
QIterable and friends will check the category at runtime, and should give
sensible feedback.
Change-Id: I778894f340c862f79a18c6c5607bcbba98dd7598
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
CentOS it seems not only backported some OpenSSL 3 functions,
but also raised the default security level to 2, making some of
our keys (and MDs?) 'too weak' and failing auto-tests here and
there as a result. For our auto-test we lower the level to 1,
as it is expected to be.
Fixes: QTBUG-86336
Pick-to: 5.15
Change-Id: I7062a1b292e8b60eb9c2b2e82bd002f09f9da603
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There is no reason to use double precision for colors. We at most have
16 significant bits anyway.
Change-Id: I8b402cd978675b8ba7248176976d934363212ff1
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Test data for QDateTime unit tests was constructed in system's local
time, which made unit test outcome dependent on the time zone of the
system running the tests.
This led to failing unit tests on systems with libc6 version
2.31 or newer. A QDateTime in a timezone, which has daylight saving
time, was created and then used in Hawaii's time zone,which has no
daylight saving time. Newer glibc checks this and returns errors.
This patch changes the behavior to create the test data in a
specified time zone setting.
Task-number: QTBUG-80441
Change-Id: I0330b647fa011be99141dde09001ff2d58bd3a5f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit f51b690e91.
The commit made all animation tests in qtdeclarative on macOS
flaky.
Change-Id: I4ccaa879df7e2ba7e253657de01cbabc9b2c655f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
AFAICT with GSSAPI the normal workflow is to run kinit or similar and
authenticate before running programs relying on it. Therefore
we can try to get the credentials before we choose whether or not
to use Negotiate.
Pick-to: 5.15
Task-number: QTBUG-85123
Change-Id: If0478fdd45389b2939ad87c2f582776fe56959bb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This is so that they are in line with the "value_type" usually found in
containers. Associative containers have "key_type" and "mapped_type" and
we will use those names for access to elements in QMetaAssociation.
Using "value" as name for sequential containers improves consistency.
Change-Id: I628b7e1446bb2d56843b843bca72d279a6b247e6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Our authentication code is race-y by design:
1. When two requests are fired off and queued at the same time in the
same QHttpNetworkConnection then if one of them encounters
"authentication required" then it will copy whatever credentials it got
to all the other channels in the connection. This is likely what the
first part of the test is testing.
2. If a later request is fired off and it includes credentials in the
url then the newly included credentials should be used instead of the
cached ones.
The race here can occurr when one socket either takes too long to
connect or the connected signal is not received early enough. Then the
first socket is used for both requests and then we can hit case #2 when
the url contains credentials.
Pick-to: 5.15
Change-Id: I646a5378d8c1256b2de98b51912953df29f68cb2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This is added to Interbase in v7 and Firebird in v3 which has been
available for sometime now. This means the minimum supported for
Interbase is now v7.
[ChangeLog][QtSQL][Interbase] The minimum required version for Interbase
is now v7.
Fixes: QTBUG-83401
Change-Id: I9927fd962f25c935be8ed5d2b7c76c00fb88cd8c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
This change shouldn't matter much to widgets, since style names
there are case insensitive. But for controls style names are
case sensitive, and in that case, "macOS" looks more correct.
Change-Id: Ia1d442bce465692ff58fecba1cc68ecbb2e52549
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Instead of doing string formating first and then using QTest::newRow,
we can do both at the same time using QTest::addRow
Change-Id: Ia5c90eb705a806e37b96a1fa174a6557f91bee6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
To not have to bother with encodings, a few QStrings are changed
to QByteArrays. This way, a few calls to QString::fromLatin1 and
to QString::toLocal8Bit can be removed
Change-Id: Ia0cf27fc2a86f9842ed0f3ebe47b050bb8a3f4e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Looks this is redundant in fact and unneeded. The check can never be
evaluated to true, since if so, it would mean it had failed in the
previous iteration, in which we already handled the exit from the loop.
Fixed also some comments.
Task-number: QTBUG-83419
Change-Id: I4fe56bfac39cd58b1166967f3ccb80cdff882748
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It has been in Qt for some years now and 6.0 marks a good point to
enable it by default. The exception is connectToHostEncrypted where we
still require the users to enable it explicitly since there's no logical
way to disable it.
[ChangeLog][QtNetwork][QNetworkAccessManager] HTTP/2 is now enabled by
default.
Fixes: QTBUG-85902
Change-Id: Ia029a045727cc593d77df9eb3a5888522ad19199
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
