It was originally added to keep compatibility with the bearer management module from Qt Mobility, and no longer needed in Qt 5.
Change-Id: I187494e02a71c3d39a52f8c0bd4d0c7cc23d0b4b
Reviewed-by: Aaron McCarthy <aaron.mccarthy@nokia.com>
The prepared plugin architecture for
printing support was used as much as
possible but some functionality had to
be done in src/printsupport.
Change-Id: Ic8446cb8018a0970b4da97c1912ba6dc20d2a09f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Returning text "1.00" instead of "1" sounds right to me.
Checking the test before the widget is shown/validated sounds pointless.
Change-Id: Ifc9e51dc9448a5bb3afbd566fe10524fbabc654f
Reviewed-by: Kristoffer Flottorp <kristoffer.flottorp@nokia.com>
The qrc tests need further investigation.
Bring at least back the basic test.
Change-Id: I302a37b6c989af76db67716ffcf10a0960234156
Reviewed-by: Kristoffer Flottorp <kristoffer.flottorp@nokia.com>
Due to clearAccessCache being made part of the public API in Qt5,
this autotest can be run on normal Qt builds again
Task-number: QTBUG-17312
Change-Id: I3b70237a28ed141ffb49762cc40c8a528f9be6a8
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
the generic systemProxyForQuery will use http_proxy from the
environment, if it is set.
Change-Id: Ie685c47eb6df1fdd2ab223defc7172bb25e6fe30
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
Fix QtSQL aoto test server addresses. New servers are located in
Brisbane. Old Oslo test servers shall not be used anymore.
Change-Id: Icd4ae4c0193f71410d572bfa014272e1e77586c0
Reviewed-by: Trust Me
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I02fe27b2c1800f929250fa8694ca2976c9661a12
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I3c1d993d5682db913aadc267d98a638061f393d6
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I48ab0ee64d8348cada2e6c7b27c67b6bbc36280d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
If the test decides not to do some extra testing for certain styles, but
doesn't find any failures in what it has done so far, it should pass
rather than skipping. Removing the QSKIPs also corrects the leakage of
the memory pointed to by "widget".
Change-Id: Ibd0f3f0605660c92e9bab2a3d1d9f31b52192575
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
If the test decides not to do some extra testing for certain styles, but
doesn't find any failures in what it has done so far, it should pass
rather than skipping. Removing the QSKIPs also corrects the leakage of
the memory pointed to by "widget".
Change-Id: Id4cf7e8dc48f836d2c6dcde57dde87797a2fe036
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Several test functions use IPv6 reverse lookups, which evidently don't
work on HPUX 11i, but only one of these tests was skipped on that
platform and the others presumably fail.
This commit also removes the commented-out test data and makes it easier
to put some useful test data back. QTBUG-22287 records the fact that no
real IPv6 hostnames are currently used in the reverseLookup test.
Change-Id: Iff1ed1b725492bcc28ca4cb5f8e2dc106887c0b4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I97046aa51f1b3fc100e2eb2fa115f1bf8ae6437d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I7c1ffe9c8c294dbdc988e1582e580b1ed3f4593e
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
These macros should only be called inside a test function, otherwise
they cannot abort the test function correctly. Solve this by making the
helper function return a boolean result (and output a warning on
failure to help with debugging) and verify the return value in each test
function that calls the helper.
Change-Id: I599673fda49051baf80a8c94b5d85a4d8c2cb406
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Using CONFIG+=GNUmake will enable dependency tracking using included
dependency files, but will use an implicit makefile rule to generate
each .d file.
We now support an additional CONFIG option, gcc_MD_depends, that
instead passes the -MD flag to a GCC (compatible) compiler. This
will generate a .d file as a side-effect of the normal compile
step.
Change-Id: Ib6ce1d93e7f07e316a345bf12aa6f2b4e9a6415d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Clang does not accept this syntax, see
http://llvm.org/bugs/show_bug.cgi?id=8875
The work around is to not use the typedef name. NS() around the
template parameters is necessary to match the real types (and
not the QMetaType::Type enumerators), otherwise we get the following:
kernel/qmetatype.cpp:1647:72: error: template argument for template type
parameter must be a type
...NS(QVariantMap)* >(where)->NS(QVariantMap)::~QMap<QString, ...
^~~~~~~
Change-Id: I3afa0cbbe4ef7ad899cfa9eafb3bcc10bedc20b3
Reviewed-by: Wolf-Michael Bolle <wolf-michael.bolle@nokia.com>
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
That codepath is taken in qml when an Image specify with and hight and
is not smooth, and the image contains alpha contents
The changes in qdrawingprimitive_sse2_p.h just put some code from the
BLEND_SOURCE_OVER_ARGB32_SSE2 macro into a sub macro to allow its reuse
The code that is not SSE2 in qt_scale_image_argb32_on_argb32_sse2 comes
from the qt_scale_image_argb32_on_argb32 in qblendfunctions.cpp
Change-Id: I071a040af4514fb21777dead9f7c5baf16071d59
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Various places in QtNetwork checked for Localhost or LocalHostIPv6,
i.e. 127.0.0.1 or ::1. By using the isLoopback API, other loopback
addresses are treated the same way (e.g. 127.0.0.2 and ::ffff:127.0.0.1)
Task-number: QTBUG-22246
Change-Id: I46f55630d8646fd68034a509969a0b7cb72ca77c
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
The standard IPv4 loopback address is 127.0.0.1, however anything in
the 127.0.0.0/8 range is also a loopback address.
isLoopback returns true for any address that is in the IPv4 loopback
address range, or is the single IPv6 loopback address ::1
Task-number: QTBUG-22246
Change-Id: Ic39100e2e97a52db700e01b109998a1cfd4335e3
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
Calling setTextMode() before open() would make the device appear to be
already open and cause later errors.
Added a qWarning and documentation update to prevent this API misuse
Task-number: QTBUG-20905
Change-Id: I2e06cd8e79f4afcf27417ac0eae6ebef980a17aa
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Add new cases for custom types and QStringList.
Change-Id: I79f8d415be43774e6b2488e8a6a8028bf4a5fd45
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Q_WS_QPA is the only active code path after merging
refactor, other Q_WS-macros are no longer used.
Enable compilation without -qpa.
- Remove Q_OS_MSDOS, Q_OS_OS2
- Remove Q_WS_QWS
- Remove/replace definitions/conditionals of Q_WS_XX
- Remove qpa branches from profiles
- Replace Q_WS_MAC by Q_OS_MAC
- Replace Q_WS_MAC && !Q_WS_QPA by
Q_OS_MAC && !QT_NO_CORESERVICES
- Similarly in profiles: mac:contains(QT_CONFIG, coreservices)
- Replace Q_FS_FAT by Q_OS_WIN
Change-Id: Icce5a6c55b052c8f72b3b979ddf31a4f388ea9c9
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Moving three benchmark tests from 'tests/auto' to 'tests/benchmarks'.
Also removing 'qttest_p4' usage while we are at it.
- void asScrollingList();
- void cacheBenchmark();
- void contiguousCacheBenchmark();
were moved to 'tests/benchmarks/corelib/tools/qcontiguouscache'
Task-number: QTQAINFRA-353
Change-Id: Icbdd852f9c14c3df042d2e19abd42af6c645a3cb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
If we only keep single QFontEngineFT in QFontCache, then when we
are looking for the MultiQPA next time with the same QFontDef,
the FT engine will be returned and we get no font fallback support.
That's why we need to keep the Multi engines in QFontCache as well
and distinguish them from the single item. Since QPA doesn't use
'screen' field of QFontCache::Key structure, we use it here to
indicate that we are caching a multi font engine.
Change-Id: Id899d5c5ba52f4bccf134bcd6b1c6386ba22063c
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
`make check' is intended primarily for running functional tests.
For the most part, it does not make sense to run benchmarks in the same
test environment as the functional tests.
Change-Id: I33b2cf1e833fc6b1d0b3525018945148ba2d3492
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This method allows calls to stationary() to automatically remember
the previous position for a given touch point id. Example usage:
QTouchEventSequence sequence = QTest::touchEvent(&window);
sequence.press(0, QPoint(10,10)).commit();
sequence.stationary(0).press(1, QPoint(40,10)).commit();
Task-number: QTBUG-22057
Change-Id: I489ab3d61f4637d2ed97d09ed0854afa814407a1
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Using relative paths in #include is best avoided.
Change-Id: Iacaab7b4c402dfc96f944f21c634afa6e4a2a32a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The queries were limited to current block, because that is the
available surrounding text. Input method side, however, cannot then
distinguish between anchor being really at start or end of the
surrounding text, or beyond it. Without the limitation there at least
is a way to know anchor is at unknown territory.
Change-Id: I388d33566388344ec816ea7d86662b7e36a3d7d0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Moving benchmark test from 'tests/auto' to 'tests/benchmarks'.
Also removing 'qttest_p4' usage while we are at it.
- void benchmark();
was moved to 'tests/benchmarks/sql/kernel/qsqlquery'
Task-number: QTQAINFRA-353
Change-Id: I241bb1a2fba1c1b5524c21e5941a6c5daf5a4a89
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
Which required porting the related unittests to qstandardpaths
Change-Id: I6eb63c46845f05cd29cc42b59872707526277c90
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
These headers should have been private from Day One. Make them private
now so that nobody will be tempted to use them outside testlib in the
future.
Change-Id: I5361777ade124d8187176f9af3cc79cd1a8ecb4f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Qt would dlopen both libqcocoa.dylib and
libqcocoa_debug.dylib, causing duplicate implementations
if the classes in the cocoa plugin (QNSView etc)
Fix this by building the release version only.
Change-Id: I1244a83c49999ce28edd97400e792fa2a0665fec
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>