This makes things easier for developers touching QtCore and running
all QtCore unit tests.
Change-Id: I7aa832a6a1be07d90cacad2eecb2364285ff3818
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This allows QVariant/QMetaType software (such as QtDeclarative) to
deal with smart pointers in a similar way to how they can deal with
naked pointers (accessing properties etc).
This also adds a requirement that T be fully defined when
QSharedPointer<T> is inserted into a QVariant.
Change-Id: I29e12b8a6aa5f4aadbd62f92b89bc238f64b5725
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The T must be derived from QObject, or it will fail to compile.
This will allow scripting or other 'wrapping' and runtime environments like
QtDeclarative to handle QSharedPointers to types derived from QObject
properly. A QSharedPointer<T> can be inserted into a QVariant, and
where T derives from QObject, a QSharedPointer<QObject> can be
extracted from the QVariant, and its properties are then accessible.
Change-Id: I68d6d89aceceb019267bd7301baa2047f9c09b90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently QDateTime::fromString and QTime::fromString do not correctly
handle fractional minutes and, in some cases, fractional seconds.
In the case of reading fractional minutes, it has been decided to
ignore invalid characters outside of the 5 character portion that
we're interested in (see code comments in fromStringImpl() for
info on why we read 5 digits). The motive is that there is a
performance penalty for calling mid to get the portion of surplus
string and also for converting to it to a float. This is also in
line with what QDate does with surplus characters, for example.
Task-number: QTBUG-14418
Task-number: QTBUG-25387
Change-Id: Ib742fe80686aff3c3770b995678cf838fb4e3bb4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Clean up and consolidate different tests in tst_qdatetime.cpp
(that seem to be doing the same thing) into single tests.
Change-Id: Ib6ceb1cb7fb4c6eca672495f96d9cfd907853c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDate::toString(Qt::ISODate) lacks prefixed 0's on years below 1000.
The ISO 8601 standard dictates that this should be the case.
Task-number: QTBUG-16476
Change-Id: I7e73152bba0f5894bcbaa3f4418732b74ce86bc5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Verify that this produces a warning containing the relevant typename.
Change-Id: I046c02585e410a211e9175600b1027dda83bdd9c
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
this cleans up a lot of hacks supporting the build of qt, including the
last bits of $QTDIR.
Change-Id: Id119886ed8097967dad6cf86ebd4e71d90c42841
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The standard streams can be redirected to a file, so don't assume
anything, but try to get the actual size and position from the OS and
from the C library (stdout is usually buffered, so the result of lseek
might be different from ftell).
Change-Id: Ice4a0aa21726671928f56a13cc07cc0e4b52091d
Reviewed-by: Richard J. Moore <rich@kde.org>
I didn't do this earlier since the current test data doesn't contain any SMP code points,
the Unicode 6.2 test data does - so, I can confirm this code really works.
Change-Id: Ieae35e8480a89e22d846fd038e79592fefbbf2ee
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Instead of expanding the scripts table with script values for the code points
>= 0x10000, it has been merged with the properties table in order to
increase perfomance of the script itemization code (not affected yet).
(Stats: the properties table grew up in 97428-89800 = 7628 bytes;
the old scripts table was of size 7680 bytes)
The outdated ScriptsInitial.txt and ScriptsCorrections.txt file has been removed
(they were just empty, the "corrigendum" script corrections should be applied
to Scripts.txt directly, *no customization allowed*!).
More script testcases has been added - at least one per supported script.
Task-number: QTBUG-6530
Change-Id: I40a9e76f681e2dd552fd4c61af0808d043962e79
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This extension doesn't work for e.g. default arguments
in function declarations.
Change-Id: I32b7afa6e01b6af55fb2409179b4fd94cb04cd8d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Completing the work of the previous commit: we don't need separate
classes. Merge into the main class's body.
Change-Id: I2f89b34cb6b7f5f9e8d8b809bebd86656f458644
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This allows a QSharedPointer to be used in contexts where the class in
question is still forward-declared. This produced a warning in Qt 4 due
to the expansion of the template, even if there was no chance of the
pointer being deleted there (because the reference count could not drop
to zero).
Now, not only is the warning removed, but you can actually have the
reference count drop to zero in a forward-declared class and it will
do the right thing. That's because the deleter function is always
recorded from the point of construction and we're sure that it wasn't
forward-declared.
The unit test for forward-declarations had to be rewritten. The
previous version was passing only because the QSharedPointer object
was created under the "tracking pointers" mode, which causes a custom
deleter to be used in all cases.
Task-number: QTBUG-25819
Change-Id: Ife37a4cea4551d94084b49ee03504dd39b8802c1
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QSharedPointer doesn't work like the other automatic template metatype
declarations because in some cases T* is declared as a metatype, but we
are interested in QSharedPointer<T> (eg QObject*). In other cases, T is
declared as a metatype and we are interested
in QSharedPointer<T> (eg char).
In particular the macro used before this patch was attempting to get the
metatype id of the element_type using for example qMetaTypeId<QObject>()
instead of qMetaTypeId<QObject*>(), which did not work.
Similarly, the variadic macro driven test is no good, because it was
testing QSharedPointer<QObject*> instead of QSharedPointer<QObject>,
so that is removed.
In the end, the only thing we can sensibly automatically declare as
metatypes are QSharedPointers to QObject derived types. That is also
the type that makes the most sense in a QML context anyway.
Change-Id: I13dd40147e2e6bedf38661f898102abaaaa96208
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Some test functions that only test QDate and QTime were in
tst_qdatetime.cpp. Upon moving these into tst_qdate.cpp and
tst_qtime.cpp, there were already some similar tests so I
consolidated them.
Change-Id: I5f8758bf8b4804ae9d3a482f49d21de9f7a1dc03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Most fixes are simple and quite obvious. The ones more involved are
the ones to QArrayData, which had probably not been compiled with
strict iterators thus far.
Change-Id: Ic4ff84c34fd9a04fd686fecaa98149b1c47c9346
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The QSet<int> is a more expensive container to use and create, so
it should be avoided.
This is source incompatible compared to earlier Qt 5 for
QAbstractItemView subclasses which reimplement dataChanged, but this
patch changes nothing compared to already-present SiC compared
to Qt 4.
Change-Id: Id95391dfd62a0a7f487a8765790b007badefb937
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Containers are auto-registered and use normalized names.
Change-Id: Id65c3940401f69436929220e1f6a971135e147ed
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This already worked, but let's have a test so we can be sure it doesn't
regress.
Change-Id: I358b436d216e3ec4310f05ccf4f70f9e7aad3281
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
* The Line Breaking Algorithm implementation conformance tests has been added;
* The Grapheme, Word, and Sentence Breaking Algorithm implementation
conformance tests has been updated.
Change-Id: Ia1a6eef6272d580964cb23788ddf30dfd5f4a5a3
Note: the Line Break test data contains some extended cases we don't currently support;
just skip them for now.
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Update NormalizationTest.txt data file with one from UCD 6.1;
Add few more QChar::unicodeVersion() testcases;
Add some line break class mapping testcases;
Add some exceptional case mapping testcases;
Add script class mapping test;
Change-Id: I164394984abb2b893c8db62fb77e7bd87aa0850b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
According to ISO 8601 (section 4.2.2.3), seconds can be omitted
from a string representing time.
Task-number: QTBUG-2813
Change-Id: I2578f290845e46a8f49be489f1d7427984ae7f08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
SoftHyphen enum value was added to specify such a boundary reason
Change-Id: I4248909eed6ab8cbca419de4dcf9fe917620a158
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Because QSystemLocale::fallbackLocale() is about UI languages,
it makes sense to check LANGUAGE as well if appropriate.
Adapt tst_qlocale.cpp accordingly.
Suggested by Oswald Buddenhagen.
Change-Id: Ib2c9674081809e3251be4e34456b05210eebc010
Reviewed-by: Oswald Buddenhagen
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
postDelayedEvent() and cancelDelayedEvent() are marked as thread-safe
in the documentation. Unfortunately, they didn't actually work when
called from another thread; they just produced some warnings:
QObject::startTimer: timers cannot be started from another thread
QObject::killTimer: timers cannot be stopped from another thread
As the warnings indicate, the issue was that postDelayedEvent()
(cancelDelayedEvent()) unconditionally called QObject::startTimer()
(stopTimer()), i.e. without considering which thread the function
was called from.
If the function is called from a different thread, the actual
starting/stopping of the associated timer is now done from the
correct thread, by asynchronously calling a private slot on the
state machine.
This also means that the raw timer id can no longer be used as the
id of the delayed event, since a valid event id must be returned
before the timer has started. The state machine now manages those
ids itself (using a QFreeList, just like startTimer() and
killTimer() do), and also keeps a mapping from timer id to event
id once the timer has been started. This is inherently more complex
than before, but at least the API should work as advertised/intended
now.
Task-number: QTBUG-17975
Change-Id: I3a866d01dca23174c8841112af50b87141df0943
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
The function returns mutable iterator on the object that can later be passed to
e.g. erase(), hence it should detach() to be consistent with
QJsonObject::begin() which also detaches.
Change-Id: Id79e8e012fd5469e06b68fbc9eecb7c6848ce9c1
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
The use of QWeakPointer for tracking QObject pointers is to be
deprecated.
Change-Id: If460ca7f515db77af24030152f4bd56e1a5fae7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a QTemporaryFile is constructed using a template file path,
the path is generated in QTemporaryFileEngine::open() and then
filePathIsTemplate is set to false. If remove() and then open()
are called on the same QTemporaryFile, the path is not regenerated.
This change ensures that if the file path was generated, it will be
generated again in the scenario above.
Task-number: QTBUG-2557
Change-Id: I718ceb89daa9a9d46fdbe811fecc3d57d6dc08c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently, QString::toFloat() returns 0 (and sets ok to false) if you
try to convert "inf". This is because inf is greater than QT_MAX_FLOAT
and there is currently no check to handle inf.
Task-number: QTBUG-8629
Change-Id: I498daf4a7a6f880f928461fca628fcaf7d1d6d08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The existing tests has been retained, the new ones has been added.
Change-Id: I12ae1b4e63dde46f3b14a7c1423c13d5881d4507
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
ISO 8601 section 4.2.3 states that "The end of one calendar day [24:00]
coincides with [00:00] at the start of the next calendar day", so
fromString() was updated to account for this.
Task-number: QTBUG-25387
Change-Id: I391db0da755dbc822ba0820c302a2c10391e1f3b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation says that started() "is emitted when the state
machine has entered its initial state", but the implementation
didn't adhere to that.
The consequence is that if you e.g. emitted a signal from a slot
connected to started(), and that signal was used by a transition
from the initial state, the signal would effectively get ignored and
the state machine would remain in the initial state.
Task-number: QTBUG-24307
Change-Id: Ibbeb627d517eaff821d88e256a949eacf6aae350
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
A QObject can't be a child of itself, so the comparison always
returned false. In practice, this was causing the entry/exit order
of parallel states to be random.
QObject::children() is documented to contain the children in the
order in which they were added, so this fix actually achieves
deterministic behavior.
Task-number: QTBUG-25959
Change-Id: Id3f12d6bfbc249f1d4fed0bafb7d0217093e458e
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>