This is the squashed diff from wip/webassembly to dev.
Done-with: Peng Wu <peng.wu@intopalo.com>
Done-with: Sami Enne <sami.enne@intopalo.com>
Done-with: Morten Johan Sørvig <morten.sorvig@qt.io>
Started-by: Andrew Knight <andrew.knight@intopalo.com>
Change-Id: I6562433c0a38d6ec49ab675e0f104f2665f3392d
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
std::get and std::visit are only available on macOS 10.14, so as long
as we're building with a deployment target lower than that, we can't
enable C++1z globally unless we special-case use of those functions.
Change-Id: Idb5eb5992ea4dd7eab92f5310321720e19ac793e
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's possible to use vcpkg using the -I and -L arguments, but
some of their libraries have different names than what we look for
during configure, so add in those variations.
Change-Id: Iee37197228cc0f15442ecd7ec4fc761f4d526e1d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Add it to configure.json and replace all occurrences of QT_NO_THREAD
with QT_CONFIG(thread). Add conditions for other features that depend
on thread support. Remove conditions where we can use the QMutex and
QThreadStorage stubs.
Change-Id: I284e5d794fda9a4c6f4a1ab29e55aa686272a0eb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
the sysroot flags need to be established even before setting up the
spec, because as soon as that happens, toolchain.prf will try to
determine the default paths and cache them.
this also fixes sysroot use in toolchain flag support tests, which run
(somewhat) independently from the toolchain setup.
Task-number: QTBUG-63483
Change-Id: I7be1540e766dac58fb16f63176aa8d2879b51ae0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
instead of pre-resolving them and passing the final LIBS to qmake, pass
raw QMAKE_*_LIBS* assignments and a QMAKE_USE stanza. the immediate
benefit of that is that it centralizes the debug/release lib handling,
which makes build variant overrides available to all libraries, not just
a few selected ones.
note that this removes the CONFIG+=build_all from the test projects.
turns out that this was ineffective to start with, as config tests are
built with an explicit CONFIG-=debug_and_release. we might re-instate it
in a non-broken way later on.
Change-Id: I2117c5b36937e8230bd571dcee83231515cbe30b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add qmake feature and configure option, which optimze the size of static
exectuable. Use for static build.
Enabled via configure --gc-binaries, or CONFIG += gc-binaries in 3rd party
projects.
Change-Id: I3c25b02caaef6a4afc6019afc9c67122dd11696d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Fixes the default C version used with gcc < 5
Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The change causes a crash when compiling the xkbcommon 3rdparty
library and compile failures (qtimageformats on Android).
This reverts commit a47cb14680.
Task-number: QTBUG-67326
Task-number: QTBUG-67327
Change-Id: I5ddc4eccad699e3eaec535fd6a63d11b0026b42e
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Fixes the default C version used with gcc < 5
Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It depends on QAbstractItemModel, so we need to switch it off if
itemmodel is unavailable.
Change-Id: I97246767a5e387b7a2cee90c34125a8411ef1c4e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We report it in the overview, but left no way of controlling it
Change-Id: I1d31f2e31bb32566f47069c3776e41033ffb1891
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... and make use of it.
it's a logical continuation of the 'arch' term, and will be used also in
qt3d's configure.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I940917d6763842499b18fffd1514c96889a0cc63
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... and make sure we can build if it's switched off.
Change-Id: I9565a2ce632a861a99e1276f3edf4f0d094b5451
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the linker supports it, add the gdb index to the debug symbols, which
makes loading gdb on Qt libraries much faster.
Change-Id: I2ed201c22913b97ac2efaefb5e31636e795ae102
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... and make sure we can compile without it. In particular,
Qt Concurrent depends on QFuture, so we specify it as a condition,
and QtConcurrentException should not depend on future but on
concurrent.
Change-Id: I65b158021cecb19f227554cc8b5df7a139fbfe78
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is necessary for WebEngine at configure time, to be able to query
which of the sanitizers was enabled in order to report unsupported
combinations.
Task-number: QTBUG-64726
Change-Id: I72f8efe4bed3e14114f885bdae16650f1f23b24b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Since the x86_simd/main.cpp file already has all the source for each and
every test anyway, just reuse it.
Change-Id: I938b024e38bf4aac9154fffd14f779f450827fb9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This has two main benefits:
1) introduces a qmake CONFIG we can use in .pro/.pri/.prf files
2) removes the need to keep an up-to-date list of which compilers
support the feature
The test is implemented as trying to compile every single SIMD test we
currently have, but without passing the -mXXX option. The reason for
trying all of them is that some people may have modified their mkspecs
to add -mXXX options or -march=XXX, which could enable the particular
feature we tried, resulting in a false positive outcome.
Change-Id: I938b024e38bf4aac9154fffd14f7784dc8d1f020
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It results in Xcode outputting a warning when debugging:
[app name] was compiled with optimization - stepping may behave oddly;
variables may not be available.
And the warning is correct, debugging is broken in this situation.
Likely caused by Clang treating -Og as -O1:
https://reviews.llvm.org/D24998
Change-Id: I25d6bf1e65c81cc5be92b9847f7d5dd6754a0177
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The feature belongs to qtdeclarative and will be added there.
Change-Id: I2faf89f6caf841958e60efed8ff3882e530f0720
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
[ChangeLog][configure] Added the configure option -qtlibinfix-plugins
to rename plugins according to QT_LIBINFIX. This option is off by
default.
Fixes: QTBUG-15192
Change-Id: Id5b267e169ee143fc8f7abc6b27bc0ed5306406f
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Enabled via configure --ccache, or CONFIG += ccache in 3rd party
projects.
Ensures that we use the right sloppiness and other ccache options
during compilation.
Task-number: QTBUG-31034
Change-Id: I696b3d3f0398873a29b93d1bc2b4d4e06ef23dc9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
only few tests remain, and many of these were mis-classified anyway.
Change-Id: Ic3bc96928a0c79fe77b9ec10e6508d4822f18df2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We're adding a lot of unnecessary files that end up later as cargo-cult,
for at most a handful of lines. So instead move the testcases directly
into the .json file.
The following sources were not inlined, because multiple tests share
them, and the inlining infra does not support that (yet):
- avx512
- openssl
- gnu-libiconv/sun-libiconv (there is also a command line option to
select the exact variant, which makes it hard/impossible to properly
coalesce the library sources)
The following sources were not inlined because of "complications":
- verifyspec contains a lengthy function in the project file
- stl contains lots of code in the source file
- xlocalescanprint includes a private header from the source tree via a
relative path, which we can't do, as the test's physical location is
variable.
- corewlan uses objective c++, which the inline system doesn't support
reduce_relocs and reduce_exports now create libraries with main(), which
is weird enough, but doesn't hurt.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: Ic3a088f9f08a4fd7ae91fffd14ce8a262021cca0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It's a Linux-specific call that was added to the kernel in pre
historical times (before Git). Sqlite3 uses mremap(2) but it has its own
checking. Nothing else in Qt uses this.
Looks like the last user was the QPF font engine, removed in commit
d7e424ee66 almost four years ago. And
that's considering that the QPF font engine wasn't in use since Qt 5.0
because QWS was no more...
Change-Id: Idaa189413f404cffb1eafffd14ceee7488514c1d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
our binary packages come without many sql drivers, because they have
proprietary dependencies we cannot ship. not every user wants to build
all of qt from scratch, so it makes sense to make it possible to
"enrich" the existing installation by compiling just the drivers. to
enable this, the drivers' configuration must be independent. but note
that it's still not possible to configure a single driver - the entire
sqldrivers directory is configured at once.
a side effect of this is that the availability of the sql plugins
cannot be made known with publicFeatures any more, because there is no
associated module pri file to put that information into. that should be
made inconsequential by making qtHaveModule() work for plugins.
Task-number: QTBUG-58372
Change-Id: Ibdebe3199688a57f93cea82dc15623081d1280f5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This was originally enabled in the mkspecs for 64-bit QNX 7.0.0
but that broke when the qtConfig change was made. It looks like
qtConfig shouldn't be used in the platform mkspecs. I suspect
the stack-protector changes were left out of the 32-bit mkspecs
so that 6.6.0 builds wouldn't be affected.
Ignore the stack-protector/stack-protector-all possibility since
it isn't possible to access it without a command line option.
Specifying both options doesn't even make sense since
stack-protector-all encompasses stack-protector.
For now, leave out command line control of this feature.
Task-number: QTBUG-59644
Change-Id: I99323216be5b592dd2c3bef6d22da195764a6e65
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The instruction is "RDRAND", but the feature name, according to GCC, is
RDRND, so I had to change some macros in qsimd_p.h.
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5166779137e63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
MinGW 6.3 ships a gold linker that pops up a crash dialog
while running configure tests.
Change-Id: Ib25e30df664779e1ecced0ae37fa1e73e98f95ea
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We can't depend on QT_HAS_INCLUDE for such an important functionality in
QtQml, so detect at configure time.
alloca() is not a POSIX function (it apparently first appeared in
Version 32V AT&T UNIX), so the actual header that defines it varies from
system to system. Clearly, if alloca.h exists, that's the one, so we try
it first. On most other systems that don't define it, it's in stdlib.h.
The only exception is Windows, where it's actually defined in malloc.h.
Task-number: QTBUG-59700
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b4b2b389a4684e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adds default off configure flag to use compiler optimizations
for size instead of the default speed/size trade-off.
Change-Id: I36702064ef2cc743d2d03a386adf5cefd5371b6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Commit 0f1b6acab7 added the detection, but
not the reporting in configure's output. This change makes them be
reported alongside F16C.
Change-Id: I27b55fdf514247549455fffd14b1711ca47b1d9a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The configure-time detection (cxx11default) isn't enough if the compiler
can be changed. This is especially necessary if Qt is compiled with a
compiler that defaults to >= C++11 (e.g., GCC 6) and then the user
selects a compiler another compiler (e.g., Clang) via -spec option. In
that case, we'd miss adding the -std=c++11 or -std=gnu++11 option to the
command-line, causing the compilation to fail.
As a nice side-effect, even moc without moc_predefs.h will now get the
__cplusplus setting.
Task-number: QTBUG-58321
Change-Id: I74966ed02f674a7295f8fffd14a8be35da9640e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
the outdated ones remain for backwards compatibility; some remain
unchanged.
Task-number: QTBUG-30083
Change-Id: Ia596b854d26b00fcb4f48df0da7ad893650ac1c8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The AES instructions were first introduced with the Westmere shrink
(22nm) of the Nehalem architecture. The SHA instructions are still
pending on Intel architecture, but is available on AMD family 17h (gcc
argument -march=znver1).
Both features operate on SSE registers, so that's why the MSVC command-
line argument is the SSE2 one and the configure-time tests depend on
features.sse2.
The qmake feature names end in "ni" because "aes" and "sha" are too
simple and could clash with other uses. The QT_COMPILER_SUPPORTS_ macro
doesn't have the "NI" suffix because it has to match the GCC/Clang
predefined macro.
Change-Id: I445bb15619f6401494e8fffd149dbd1f862ff51c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The "accessibility" feature was defined globally for qtbase, but also
in src/gui. The definitions could end up with different values.
Change-Id: I1a932c3c04a5fc26b9f67eb4f5ff02e524f380e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use F16C or ARM FP16 if available at compile time.
Configure check added because older clang compilers have F16C defines
and flags but not all the intrinsics.
Change-Id: I71f358b8fd003e70ab8fcf35097414591e485112
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The minimum version of Xcode that we support is 5.1 (based on Clang 3.4)
Change-Id: I536c32a88bff44dab37afffd14a11f709fb25169
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
don't fail to set up cross_compile early enough. otherwise, we'd
populate the cache for target builds with data for the host.
amends 6b8666c7 and 5060740f.
conversely, pass on extra flags to configure tests when not cross
building.
amends d8be8110 (and 2c5eb3e6).
Task-number: QTBUG-58556
Change-Id: I531d71e06204a0b17ae6dabf017a52e0f2efd9a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Alloca() is not supported on all platforms, like
INTEGRITY on ARM, so adding a configure check for it.
This can be used when building QtQml and 3rd party
code, in particular PCRE2 and SQLite.
Change-Id: I9785e16c21f67d1a68fef567e18c3356170f027e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The patch fixes a number of bugs in code, and removes dead logic
clarifying that MIPS DSP, like ARM NEON, has no runtime detecton.
Change-Id: If2f4eea68da5b2eaa80b8e9c8258206d8c1b7173
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Enables optimizing with -Og if GCC has the option available, this
should produce faster debug binaries without compromising debugability.
Is a privateConfig to limit it to the default Qt build.
Includes two fixes for false positives of maybe_uninitialized triggered
by -Og on gcc 4.9.
Change-Id: I466d7a4070295714189024369312e6cbd36cfacf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It only applied to Windows (not MSVC, like the help said) and the build
was broken with this option. So remove it, as we clearly never test
this.
[ChangeLog][Windows] The -no-rtti configure option was removed, as Qt
5.8 fails to build under that condition. To disable RTTI on user code,
add to your .pro file: CONFIG += rtti_off.
Change-Id: I2bc52f3c7a574209b213fffd149aae1b8d0cf9df
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... so other modules (qtwebengine) can query it in a modular build.
Change-Id: I849947339e91db44be9280ead75fb423c62957e3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Initial support for INTEGRITY to build QtBase
Change-Id: I18f36b4dea9107f01e1c281e4b62880590c777a1
Reviewed-by: Tuukka Turunen <tuukka.turunen@theqtcompany.com>
Reviewed-by: Nikola Velinov <nvelinov@ghs.com>
Reviewed-by: Risto Avila <risto.avila@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
turns out that just appending builtin-qt.conf isn't a good idea:
executable-editing tools (objcopy, prelink, etc.) will happily drop the
"attachment".
a safe method would be adding a proper section to the executable, but
there doesn't appear to be an objcopy equivalent in msvc, and using
entirely different methods of embedding the file with different
toolchains seems like a rather bad idea.
so instead go back to the old method of building qmake with a generated
qconfig.cpp. of course, as said file is now created by qmake itself, we
have to compile qlibraryinfo.cpp a second time, and link a second qmake
executable.
Task-number: QTBUG-57803
Change-Id: I9e232693550aa870cec154e49cc06add13017cc2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... so that we can turn it off if we don't want to build it.
Change-Id: Ia330dfa1477bcd2dc8e24eb55400e100fca156b5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... so that we can turn it off if we don't want to build it.
Change-Id: Ib27386da4754d843d4e4cbb05f9542852efefb88
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This way we can disable it by passing -no-feature-sql to configure.
Change-Id: Ia47d72101de0788478997fa1854cedcd1742f6fd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This way you can disable support for QtNetwork by specifying
-no-feature-network on the configure line.
Change-Id: I46217ccc525a9e2c85394ed4eb6db0e2b60b6d86
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
this makes it consistent with the determination of the default
include/library paths. this makes sense, as it's possible to switch the
sdk/toolchain after building qt (within reason).
a side effect of this change is that for compilers which emulate other
compilers, both the real and the emulated version are now made
available.
Change-Id: Icfcc672c0d2e3d1b5e622993c366063d70ad327c
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
detecting the machine tuple must happen before committing qdevice.pri.
Change-Id: Ic37eda42fff805d6e1edb5dd92898abd59d6bdc9
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
this fixes the x-build for raspberry pi, as that spec refers to the
sysroot.
the path setup doesn't require the device options to be in effect yet,
so it was sufficient to move the existing spec reload to a later point
in time.
Change-Id: Idc521aa13ff441931e954c7c9004472cf7061ee1
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QtWebEngine requires this in order to disable code that is not allowed
on the Mac App Store. The option is too generic to go directly into
QtWebEngine however, as it can be used to toggle additional features in
qtbase as well as on platforms other than macOS.
Change-Id: I556298f4b654a8904c33002ef097a75e2e38938e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
we pull this feat off by booting configure with a dummy spec. the proper
spec gets loaded subsequently.
note that it was necessary to move the cache loading after processing
the early checks (from which the spec handling is triggered). this is
just fine, as the cache is needed only by tests, which are forbidden at
this stage by definition.
Change-Id: I5120e25a8bf05fb8cc5485fd93cf6387301089aa
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this moves us another step towards the "outer" configure doing just
minimal bootstrapping of qmake.
a challenge here was that so far, qmake itself needed qconfig.cpp. this
was replaced by usage of a qt.conf file instead of compiled-in values.
however, to make the executable still self-contained, that qt.conf is
embedded into it (by simple appending of a fixed signature and the text
file).
the qmake with the embedded qt.conf is not used for the qt build itself,
which instead relies on the qt.conf in bin/ as before. however, due to
the missing built-in values, this file now needs to contain more
information than before. but except for a minimal version that is needed
to start up qmake/configure at all, that file is now also generated with
qmake. as some of the newly set up properties are subsequently used by
configure itself, qmake gains a (deliberately undocumented) function to
reload the qt.conf after it's fully populated.
unlike the old implementations, this one doesn't emit redundant qt.conf
entries which match the hard-coded fallbacks. omitting them leads to
leaner files which are more comprehensible.
Started-by: Paolo Angelelli <paolo.angelelli@qt.io>
Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
in its current form, it was introduced only in 5.7, mostly as a side
effect of -external-hostbindir (which is now handled differently).
it only ever worked for the macOS and MinGW specs, as a side effect of
them supporting -sdk and -device-option (for good reasons), and was
supported only by the unix configure. it's not believed to be really
useful and complicates matters somewhat, so get rid of it again.
should it ever become actually relevant, it can be re-introduced
properly, probably along with a -host-sdk option for macOS.
Change-Id: Ib078469ea39deb821c7b6a8c67fda9e1a95fedf5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... where it actually belongs, as it should work in each repo in a
modular build.
Change-Id: I5463f0bcacb239900bed0b0f7be9cf32a3eab04e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this also removes the need for passing pre-processed options via
configure.cfg, so get rid of that.
a somewhat unfortunate side effect is that the android-style-assets
feature had to move back to the top level, as the licensing options
depend on it.
Started-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: Id4d1e0ba18b3e3104400293b8f0c7f2f65e68dea
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
amends aa3d08ee86, which attempted to
revert the default change to -shared in 4c26b48633 but failed to take
into account an explicitly passed -shared argument, resulting in:
ERROR: Feature 'shared' was enabled, but the pre-condition
'!config.uikit && !config.integrity' failed.
Change-Id: Ide381624245e7c132a07e98c9107be7126dd488a
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This is a revert of the default change to -shared in 4c26b48633,
which was landed without dependent changes like
https://codereview.qt-project.org/#/c/160747/ being landed first,
breaking the build for people building with the default configure
arguments.
Change-Id: I66eba76ca681ccf9b2ee54fa16b3e08888ae2fb4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
this option makes sense only when the default build is debug (regardless
of whether the release build is also enabled), as it overrides the
default.
Change-Id: I29f87430242a7d8239f13f0b33f6eebe098d9cf7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this is much more intuitive, and actually produces a sensible result
with configure -recheck after a compiler upgrade.
Change-Id: Icfa0b85377d9fc014e66490c8ebf6c9236df978e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Instead of forcing a static build, configure now respects the
-shared flag and defaults to that.
[ChangeLog][Important Behavior Changes] Qt for iOS now respects the
-shared configure flag, and now defaults to this configuration as with
all other platforms.
Task-number: QTBUG-42937
Change-Id: I9e7b2de8f7f8ba031c2610ff5ac0858e357424bd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
