QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
CSS style such as "line-height: 1.5;" should be used as a multiplier,
but Qt uses it as percentage which makes line spacing way too small. To
workaround this, convert it to percent and use as
QTextBlockFormat::ProportionalHeight instead.
[ChangeLog][QtGui][Important Behvior Changes] Changed CSS line-height
property with multiplier to follow CSS spec
Task-number: QTBUG-56848
Task-number: QTCREATORBUG-17683
Change-Id: Icc98f7c0d4d07542a220702c287f23fa450ef875
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
<div>1<br/></div>2 was inserting two newlines between 1 and 2, while all
tested web browsers only insert one newline - as long as there is nothing
between the <br/> and the </div>.
This was the cause for extra newlines being inserted in KMail when
replying to HTML emails, such as those generated by gmail.
Change-Id: I5145d977701e68913264357bba22780e7cdd3f7d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The QTextDocument::toPlainText() converts some characters in the
text to ASCII, which can be problematic for use cases where you
want to save the precise contents of the document, e.g. in
Qt Creator. Since we don't want to change the behavior of
toPlainText(), we introduce a new function which returns the
raw text contents of the document instead, with no modifications.
[ChangeLog][QtGui][Text] Added QTextDocument::toRawText() function.
Task-number: QTBUG-56538
Change-Id: Ib6c48a16551c4c71c4c431760f993793d1af6806
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
[ChangeLog][QtGui][QTextDocument] Fixed a bug that would return a wrong
position when searching backward from the end of the document.
Task-number: QTBUG-48182
Change-Id: I6e88f808a50cb840f61e7bc579e2a28c5300089d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The QTextBlockFormat::FixedHeight overrides the line height
regardless of its calculated height. If the line contains
objects or text which is higher than the specified line height,
using FixedHeight will cause them to overlap with the previous
line. This is not what happens in normal web browsers. The
expected behavior is that the line height given in CSS is the
minimum height, but that we still reserve space needed to display
everything without overlaps.
To make it possible for people to retain the old behavior, we
introduce the -qt-line-height-type property, which allows them
to override the default.
This also fixes output from toHtml() to use the new property
rather than set the minimum height of the paragraph or the
"line-spacing" property, which does not exist in either CSS nor
in Qt.
[ChangeLog][QtGui][Important Behavior Changes] When line height
is specified in pixels, this is now interpreted as the minimum
line height rather than an absolute line height to avoid overlaps.
To get the old behavior, use the -qt-line-height-type property in
CSS and set it to "fixed".
Task-number: QTBUG-51962
Change-Id: Ic2dde649b69209672170dad4c2de1e1c432a1078
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
If a user selected the text "foo" and typed "bar", upon pressing undo,
the text would change to "b". This is incorrect and does not match the
functionality of QLineEdit or the default behaviours of Windows/OSX/Ubuntu.
This was fixed by a change made to always merge two sequential inserts
if they are not part of the same block. Previously the selection delete
and the "b" were part of one edit block and "ar" was part of another.
With this change, the selection delete and "bar" are part of the same
edit block.
Unit test changes are part of a separate review (Part #1) since they
required changes in qtdeclarative.
[ChangeLog][QtGui][Important Behavior Changes] Fixed QTextEdit to match
undo functionality of QLineEdit to group two sequential inserts into one
undo action.
Task-number: QTBUG-38825
Change-Id: I76bf30e331e3526277c3e0ade58cf95b611fc117
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Labels would use a statically defined font for <pre> blocks.
Use the one defined by the QPlatformTheme instead, through
QFontDatabase::systemFont(FixedFont)
Task-number: QTBUG-50564
Change-Id: I5491bd0defce651bdf809bcbc6a529a900f4959b
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: I31adb60bdaf7ea243143a9244b6c4f66f38b189d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I624deb320c378c18a29b3707f48583d53bfd5186
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
When CSS is set in a head tag then it was not being inherited by the child
tags when the CSS specification indicates that the properties are in fact
inherited. This ensures that those properties are inherited and the non
inheritable ones are unchanged.
A test is added to cover the different situations with inheritance and a
fix is done for the QTextDocumentFragment test which was passing despite
having incorrect defaults.
Task-number: QTBUG-28770
Task-number: QTBUG-34153
Change-Id: I55966240845a885852a04ecb82c61926dea9f800
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
When the default font has the pixel size set instead of point
size, then pointSize() will return -1 and the output from the
HTML will include the pixel size instead. This happens e.g.
on Android when we extract font information from the system.
Change-Id: I26dc49fff215c9887cf0b78dcfff88df0f74450d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Currently QTextDocuement only provides find using QRegExp. This patch
aims to add support for QRegularExpression.
[ChangeLog][QtGui][QTextDocument] Support for searching with a
QRegularExpression in a document has been added.
Change-Id: I6dba10545b83995d093407038a821fe54db3d261
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The plain text edit's smart repaint logic in
QPlainTextDocumentLayout::documentChanged assumes that during a change inside
just one block, the block is in the state before the edit and a call to
layoutBlock() is going to bring it up-to-date. Then only a comparison of the
bounding rect - before and after - is going to allow for smart repaints.
The assumption of the layout being in the same state as before the edit got
broken by commit cc57a2e90f, which introduced
code to use a QTextCursor within a slot connected to QTextDocument's
contentsChange signal. The usage of the QTextCursor there ends up updating the
layout of the block ahead of time, breaking the assumption and therefore the
optimization, in the sense that during changes in the preedit that cause a
change of height / line count, the old bounding rect in
QPlainTextDocumentLayout::documentChanged and the new bounding rect will be the
same. This causes a repaint of only the edited block, missing repaints of the
following blocks, even though the line count effectively changed.
So what's causing QTextCursor to mess with the layout is the attempt of
updating the vertical movement x property. This patch inhibits the update,
marking it as dirty for initialization later. This means that slots connected
to this low-level signal cannot rely on the cursor's visual x position, but
that doesn't seem useful anyway and isn't required for commit
cc57a2e90f.
Task-number: QTBUG-38536
Change-Id: I5fae12d646a4b2d2cc22b9f2d021e5dc8cfdda94
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
Since the original change caused a problem with the CSS
rules being always inherited where in some cases this should
not be happening.
This reverts commit 6f65466137.
Change-Id: I6e9cf163d752b1869b5e967a7ab59963d655ba87
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Required for QQuickText & friends to implement image resource handling
in a clean way - to get rid of QQuickTextDocumentWithImageResources and
eventually make QQuickTextEdit's document interchangeable.
Change-Id: I97314a6c3e2d5726539d5722795a472631388cb0
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
The default link color used to be resolved to the link color of the
application palette, but got lost during the Qt 5 modularization (see
commits 7351a43 and 3f9a7f9).
Task-number: QTBUG-28998
Change-Id: I7f07427f6c03f83c557100938ad9f7a39349d303
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
When CSS was set in the head tag then it was not being inherited by the
child tags. This ensures that the inhertiance happens and that the deeper
the CSS is set then it will ensure that it has precedence over the ones
set on the parent.
A test is added that shows the standard inheritance from the head tag and
the precedence from child tags in effect too.
Task-number: QTBUG-28770
Change-Id: I30be3ec141b2cd8d6e0db8a92669aed34da93b33
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
With trailing spaces in some cases, we would not get the
"no justification at end of paragraph" special case, and continue
in the code, getting the unexpected case where line_length becomes
< 0 which would lead to memory corruption because we were writing
outside our buffers. I added an assert to catch this type of bug
earlier, and I added the trailing spaces to the test for the end
of the paragraph.
The test case added is one example which would crash.
Task-number: QTBUG-27354
Change-Id: Id720a6fa55dbc709ce04dd5321e55687bf960d75
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Introduced by 2e0003eda4. We were
missing a attributesEmitted=true which caused the output from
toHtml() to sometimes be invalid when using pixel sizes to
specify the font size.
Task-number: QTBUG-25778
Change-Id: Ied61fcaef425a590d71c0b52292ac676cb88ba52
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <gzjjgod@gmail.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Export of color transparency component is added for cases where color
is exported to html. New static function colorValue() is added to
prepare CSS string representation of QColor. When the color is opaque,
it falls down to QColor::name() method which was used previously,
otherwise it returns 'rgba()' CSS statement or 'transparent' keyword in
case transparency is 0.
6-digit precision is used for alpha value as it's maximum which can be
processed properly by Gecko and Webkit engines
(http://lists.w3.org/Archives/Public/www-style/2009Dec/0295.html).
Import part for rgba() statement was also added to QCssParser. It
supports rgba() color values as stated in CSS Color Module Level 3
(http://www.w3.org/TR/css3-color/#rgba-color).
Import of undocumented statement 'rgba(int,int,int,int);' was also
added to preserve regression test success and to provide compatibility
with previous code relying on this behaviour.
Test cases added to QCssParser autotest for rgba(int,int,int,float)
statement and to QTextDocument autotest for rgba(int,int,int,float)
and 'transparent' statements for certain 'color', 'background-color'
and 'bgcolor' properties.
Change-Id: Id341c4e800249820d52edef8003e50f9a74d062b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I2850033159508ebb1ff7564e15b99a146dbee94c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- qtextdocument unittest to remove foo.png after test.
- qtextdocumentlayout unittest to remove expected.png and img.png after test.
Change-Id: I42971e9128d399cadc87b9fd345c868065f180a9
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I97046aa51f1b3fc100e2eb2fa115f1bf8ae6437d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
