Remove target specific flags from static_link_order.
Move the check to the common config.tests folder.
Amends 5fb99e3860
Pick-to: 6.2
Task-number: QTBUG-93002
Task-number: QTBUG-94528
Change-Id: I1368075ec6bd1e743b2b89fd93143df38a278ec2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Only depend on the ${project}_src and ${project}_tools targets.
This might exclude some non-obivous target dependencies, but we can
adjust that if needed.
This reduces the build.ninja file of qtbase + qtsvg form 341MB
to 41MB when configuring with tests and examples, as well as reduces
the processing time of calling ninja.
Amends d97fd7af2b
Pick-to: 6.2
Change-Id: I2860d8ae89728f33f6b73fede1335cd6d6290f78
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For user projects we run the static link order check once
'find_package(Qt6 ...)' is called.
If linker can resolve circular dependencies between static libraries
and object files we set the _qt_link_order_matters property of the
Qt::Platform target. This indicates the use of finalizers is not
required and we may rely on CMake-base propagation of resource
libraries and resource object files.
If linker could not resolve circular dependencies depending on
the _qt_resource_objects_finalizer_mode value:
- Finalizer will be called and collected resource objects will be
linked to the target directly.
- Finalizer will be omitted and resource objects will be linked
using the target_sources function implicitly. This only
propagates resource one level up if consumer links the static
library PUBLICly, but all symbols will be resolved correctly
since object files are placed in the beginning of the linker line.
In the CMake version 3.21 we expect that CMake will take care about
the order of the resource object files in a linker line, it's
expected that all object files are located at the beginning of the
linker line.
TODO: Need to confirm that the CMake 3.21 meets the expectations.
Amends 4e901a2f99
Pick-to: 6.2
Task-number: QTBUG-93002
Task-number: QTBUG-94528
Change-Id: Ia68976df8182d3d3007b90c475c1e3928a305339
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This change allows temporarily removing the EXTERNAL_BUILD option in
a qt repo examples project to check how the examples behave in a
non-external project build, without forcing the developer to use a
prefix build.
Useful to compare behavior until we've ported over prefix builds to
use EXTERNAL_BUILD.
Amends d97fd7af2b
Change-Id: I29b834bb5f00e1e93966caae6f816faedba76b76
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
'ld' only capable to resolve circular dependencies by wrapping the
suspected static libraries and objects using --start/end-group
arguments. We want to detect if linker is 'ld' at configure time to
decide how to link the resource objects if finalizers are not enabled.
The qt_config_compile_test function is extended with an extra argument
since it's required to pass custom cmake flags to the ld-related test.
Pick-to: 6.2
Change-Id: I484fcc99e2886952d8b0232f37e4e6a35d072931
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This means calling 'ninja apk' in a Qt build with examples configured
will build all example apks, regardless of whether the examples are
built as external projects or in-tree.
Fixes: QTBUG-94264
Change-Id: I5c7af0354858898a2e154a6d54fb025e4d81ff80
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Examples are intended to show how to build against an installed Qt.
Building them as part of the main build means the way the Qt targets
are defined and created are not representative of an end user's build.
By building them as separate projects using ExternalProject, we can
more closely replicate the intended audience's environment. This
should allow us to catch more problems earlier.
Having examples built as part of the main build also creates problems
with some static builds where a tool built by the main build is needed
during configure time. This happens with other repos like qtdeclarative
but not (currently) with qtbase. Converting the examples in qtbase to
be built using ExternalProject is intended as a demonstrator for how
other repos can do similar. Until other repos are converted, they will
continue to work as they did before, with examples as part of the main
build for non-static builds only.
The new build-externally behavior is only supported for non-prefix
builds with this change. Prefix builds will continue to use the old
non-external method. Support for building examples externally in
prefix builds will be a separate change.
Task-number: QTBUG-90820
Fixes: QTBUG-91068
Change-Id: I2304329940568dbdb7da18d54d5595ea7d8668bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce the concept of repository target sets, which is a named set of
targets within a Qt module repository.
In a Qt repository, a repo target set 'qtfoo' can be defined in the
top-level project file with
qt_internal_define_repo_target_set(qtfoo DEPENDS Bar Baz)
The DEPENDS argument specifies Qt components that need to be
find_package'd when building the targets that belong to qtfoo.
In subdirectory project files, use
qt_internal_include_in_repo_target_set(qtfoo) to mark the file as
belonging to the repo target set.
To build and install a single repo target set, specify
QT_BUILD_SINGLE_REPO_TARGET_SET=qtfoo when configuring the Qt
repository.
Change-Id: Ic9e6213e3225988fd561f315bc857ee44ff17420
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Sometimes projects don't follow the standard directory layout, so they
end up copy-pasting the guts of qt_build_repo and adapting that.
Split the macro into smaller ones so it's easier to reuse.
Change-Id: I8cc72ba2a2eaf58afd44950b3ac78378b7b1fdfd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Currently in order to compile a Qt6 test standalone one needs to use
the qt-cmake-standalone-test script which will load the
Qt6BuildInternals/QtStandaloneTestTemplateProject/CMakeLists.txt project
with the current test source directory to create a complete CMake project.
This commit will allow a test to have these lines at top:
cmake_minimum_required(VERSION 3.16)
if (NOT QT_BUILD_STANDALONE_TESTS AND NOT QT_BUILDING_QT)
project(a_qt_test LANGUAGES C CXX ASM)
find_package(Qt6BuildInternals COMPONENTS STANDALONE_TEST)
endif()
and be standalone and work with any IDE capable of loading CMake projects.
Fixes: QTCREATORBUG-25389
Pick-to: 6.1
Change-Id: If3f878b7e560a8bfbb604a8f1aa30b7962742e66
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The directory-level targets missed the first level of sub-targets.
E.g. `qtbase_qmake` did not have a dependency to `qmake`.
Fix qt_build_internals_get_repo_targets to first grab all targets of the
subdirectory and then recurse.
Pick-to: 6.1 6.0
Change-Id: I3604000caec22fac9a4cc5f5aaf651d550d16793
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Homebrew introduced a new default prefix for Apple Silicon machines,
so that both arm64 and x86_64 packages can be co-installed on a single
system.
The intel packages are installed into /usr/local and the arm64
packages are installed into /opt/homebrew.
For Qt building purposes, we don't want to find packages in any of
homebrew's prefixes unless explicitly requested by the user
Currently our arm64 macOS CI config does pick up system libs under new
prefix.
Remove the new path from the system prefixes.
Amends f3c7d22dd0
Task-number: QTBUG-85447
Change-Id: I381d31c95bcdab26147a331444ba40c7af9d0a95
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Add new configure option -make minimal-static-tests and CMake option
QT_BUILD_MINIMAL_STATIC_TESTS. In conjunction with QT_BUILD_TESTS
it will enable building a minimal subset of tests when targeting
a static desktop Qt build.
In qtbase the minimal subset includes all the auto tests of testlib,
tools, corelib and cmake. In particular this will also do cmake build
tests and qmake build tests (tst_qmake)
Adjust CI instructions to enable building a minimal subset of static
tests when a platform configuration is tagged with the
MinimalStaticTests feature.
Fix and skip a few tests that were failing.
Pick-to: 6.1
Task-number: QTBUG-87580
Task-number: QTBUG-91869
Change-Id: I1fc311b8d5e743ccf05047fb9a7fdb813a645206
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A few configure defines get changed:
QMAKE_WASM_PTHREAD_POOL_SIZE is now QT_WASM_PTHREAD_POOL_SIZE
QMAKE_WASM_TOTAL_MEMORY is now QT_WASM_INITIAL_MEMORY
QMAKE_WASM_SOURCE_MAP_BASE is now QT_WASM_SOURCE_MAP_BASE
device-option EMSCRIPTEN_ASYNCIFY=1 is QT_EMSCRIPTEN_ASYNCIFY=1
To create source maps for debugging. use
device-option QT_WASM_SOURCE_MAP=1
Task-number: QTBUG-78647
Change-Id: If9f30cd7fb408c386d6d69b5f7b1beecf1ab44b5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building and installing a Qt repo that provides plugins for a Qt
module within a different repository (for example, qtimageformats
providing imageformat plugins for QtGui), re-configuring that repository
would result in configuration errors like
"add_library cannot create ALIAS target "Qt6::QTgaPlugin" because
another target with the same name already exists."
This happened, because the find_package(Qt6 COMPONENTS Gui) calls pulled
in the Qt6*PluginConfig.cmake files that create imported targets for the
plugins we want to build.
To fix this, when building Qt, we now load only plugins that are
provided by repositories the currently building repository depends on.
We read the repo dependencies from dependencies.yaml when the
Qt6BuildInternals package is loaded, but only in static builds and only
if we're currently building a Qt repository.
To find out whether we're building a Qt repository, we check whether
QT_REPO_MODULE_VERSION is defined. We cannot check QT_BUILDING_QT,
because that variable is not available for the first find_package calls
in the repository's top-level project file.
In each Qt6*PluginConfig.cmake file, we bail out if the plugin's
repository is not one of the ones in QT_REPO_DEPENDENCIES.
Fixes: QTBUG-86670
Fixes: QTBUG-91887
Change-Id: I8f6c8398032227032742f1ca019e983ff2bcd745
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In shadow per-repo builds we never hit the code that is supposed to
install cmake/Find*.cmake files. This caused problems when statically
building a Qt repo like qtshadertools against qtimageformats which
provides such Find*.cmake files.
Fixes: QTBUG-91538
Change-Id: I1147daee817ac71303d93e8bf368b2769afb0bb4
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In QtSetup.cmake the PROJECT_VERSION_MAJOR variable was used to
identify prefix of 'Qt<version>HostInfoConfig.cmake'.
Qt<version>HostInfo is not found, if project version differs
from qtbase version.
Move the 'INSTALL_CMAKE_NAMESPACE' and 'QT_CMAKE_EXPORT_NAMESPACE'
variables to 'QtBuildInternalsConfig.cmake'. In this case
variables will be exposed for a wider list of internal routines.
Use the 'INSTALL_CMAKE_NAMESPACE' variable as prefix to find
Qt<version>HostInfo module.
Fixes: QTBUG-90345
Change-Id: Ic595d1c5beb74f34e69b58e18590a3afc2f346f7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The QtBuildInternals config package file gets processed before feature
evaluation occurs. That means INPUT_pkg_config may be defined, but the
corresponding FEATURE_pkg_config variable won't have been set/updated
yet. Do this check locally because the availability of a number of
features is conditional on whether pkg-config is available.
Change-Id: I6030eb380ee0c630ffbe5db5eed397a46227c7f6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qt-cmake-standalone-test would be looking for the config files under
the target machine install prefix instead of under the staging prefix
on the build host.
Change-Id: I29850af6d8fe502f4944f689ec10539d17ccdcb9
Pick-to: 6.0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Disabled by default as they are currently not being built and many are
not working properly, this will allow us to start using them again.
Change-Id: I823368d04e9fde2beccabedc3ca15efd1f355bfb
Pick-to: 6.0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add custom targets with '_benchmark' suffixes to make run of
benchmarks using generators possible, e.g.:
$ ninja tst_bench_qudpsocket_benchmark
Extend '-[no]make' option to pass benchmark. Rework
'-[no]make' processing to unify these options processing.
Also looks like it doesn't make sense to enable benchmarks without
having test enabled. So '-DQT_BUILD_BENCHMARKS' enables test as own
dependency automatically.
Task-number: QTBUG-89076
Pick-to: 6.0
Change-Id: Ieee9eadaf6d75a1efec120242d6eb786ace1b071
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When a CMake release introduces a new policy that affects most Qt
modules, it may be appropriate to make each module aware of that newer
CMake version and use the NEW policy without raising the minimum CMake
version requirement. To reduce the churn associated with making that
change across all Qt modules individually, this change allows it to be
updated in a central place (qtbase), but in a way that allows a Qt
module to override it in its own .cmake.conf file if required (e.g. to
address the issues identified by policy warnings at a later time). The
policies are modified at the start of the call to
qt_build_repo_begin().
For commands defined by the qtbase module, qtbase needs to be in
control of the policy settings at the point where those commands are
defined. The above mechanism should not affect the policy settings for
these commands, so the various *Config.cmake.in files must not specify
policy ranges in a way that a Qt module's .cmake.conf file could
influence.
Starting with CMake 3.12, policies can be specified as a version range
with the cmake_minimum_required() and cmake_policy() commands. All
policies introduced in CMake versions up to the upper limit of that
range will be set to NEW. The actual version of CMake being used only
has to be at least the lower limit of the specified version range.
This change uses cmake_minimum_required() rather than cmake_policy()
due to the latter not halting further processing upon failure.
See the following:
https://gitlab.kitware.com/cmake/cmake/-/issues/21557
Task-number: QTBUG-88700
Pick-to: 6.0
Change-Id: I0a1f2611dd629f847a18186394f500d7f52753bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
...and include it in QtBuild.cmake.
Commit e8d8b1a5e4 added two different code paths to include
QtBuildInternalsAndroid.cmake.
This was needed, because:
In a top-level build, we must not include files that are not yet
installed. We have the source tree available, and
"${QT_SOURCE_TREE}/cmake" is in CMAKE_MODULE_PATH.
We can use the "module syntax" of the include() command.
In a per-repository build, when building against an installed qtbase, we
must not include files of the source tree, because that's not guaranteed
to be available. However, Qt6BuildInternalsConfig.cmake is installed,
and we can directly include QtBuildInternalsAndroid.cmake, which is
right next to it.
We can circumvent this whole issue by moving the Android-related
functions out of the Qt6BuildInternals package and including it in
QtBuild.cmake.
Pick-to: 6.0
Task-number: QTBUG-88718
Change-Id: I5192ba19bb77952505c20d053d7285f798d16ac5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Commit 9e0fb9c4fb introduced build
failures in non-top-level builds when building Qt modules against
qtbase.
This was observed on in the CI for CentOS.
Partly revert above commit by taking the old code path for non-top-level
builds.
Fixes: QTBUG-88718
Change-Id: I8926e1e4628ec5bdcea99e10497c1f65c10d072d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
(cherry picked from commit 510186a218e63c88100efc38cb1611f122f94570)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
For consistency, apply the following renamings:
QT_NO_MAKE_EXAMPLES -> QT_BUILD_EXAMPLES_BY_DEFAULT
QT_NO_MAKE_TESTS -> QT_BUILD_TESTS_BY_DEFAULT
QT_NO_MAKE_TOOLS -> QT_BUILD_TOOLS_BY_DEFAULT
BUILD_EXAMPLES -> QT_BUILD_EXAMPLES
BUILD_TESTING -> QT_BUILD_TESTS
This should help to better convey the difference between "BUILD" and
"NO_MAKE".
To configure tests, but not to build them by default, pass the
following to CMake:
-DQT_BUILD_TESTS=ON -DQT_BUILD_TESTS_BY_DEFAULT=OFF
Analoguous for examples:
-DQT_BUILD_EXAMPLES=ON -DQT_BUILD_EXAMPLES_BY_DEFAULT=OFF
Tools can be excluded from the default build with:
-DBUILD_TOOLS_BY_DEFAULT=OFF
The variable BUILD_TESTING is still available and initialized with the
value of QT_BUILD_TESTS.
Pick-to: 6.0 6.0.0
Change-Id: Ie5f29dfbdca8bfa8d687981dfe8c19c0397ca080
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
During a top-level prefix build, while configuring qtsvg,
Qt6BuildInternalsConfig tries to include QtBuildInternalsAndroid.cmake
but such files are not copied by qt_copy_or_install() at configure
time.
We need to use the "module" form of include() to take CMAKE_MODULE_PATH
into account. Then QtBuildInternalsAndroid.cmake can be loaded from the
source tree.
The include's current form was introduced in commit
3cb9ee3a5b without further
explanation. Assuming an accidental change.
Pick-to: 6.0 6.0.0
Task-number: QTBUG-88460
Change-Id: If06ac715fae3c2bebbeffca44b7e07265ffb0f71
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add a target for each level-1 subdirectory in a module. Ninja already
generates phony targets such as "qtbase/src/all", but those are not
available in e.g. IDE integrations of CMake. With this addition, targets
like qtbase, qtbase_src, and qtbase_tests are available in IDEs.
Pick-to: 6.0 6.0.0
Change-Id: If1c3369e9413b3ce127e68c443d4d22949708d5e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
"ninja install_docs" should not run the "docs" target, because with
the usual workflow
ninja docs
ninja install_docs
the documentation would be built twice.
That of course means that "ninja install_docs" will fail if "ninja
docs" wasn't run before.
Analogous for html_docs, qch_docs, the repository-level and
module-level documentation targets.
Change-Id: I8ad83602dd393b5afc79a19ab3d395987c889d0d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The following targets did not do any actual installation:
install_docs, install_html_docs, install_qch_docs,
plus their repository-level counterparts.
Add the following dependencies:
install_html_docs
--> install_html_docs_<repo>
--> install_html_docs_<module>
Analogous for qch.
The install_docs target already triggers install_html_docs and
install_qch_docs. Analogous for install_docs_<repo>.
Fixes: QTBUG-86738
Change-Id: I3468e000e050e2787a859e61d40161f5459cb351
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add a new function that returns the minimum CMake version required to
build Qt. Pass that value to cmake_minimum_required() when building
qtbase and its standalone tests.
The minimum supported CMake version is read from qtbase/.cmake.conf
and its value should be updated when the need arises. It's the main
source of truth for all repos.
Provide a way to lower the minimum CMake version at configure time by
passing a value via QT_FORCE_MIN_CMAKE_VERSION.
This is not an officially supported way of building Qt. If the
specified version is lower than Qt's supported minimum, show a
warning.
Nevertheless the option is useful for testing how Qt builds with a
different minimum CMake version due to different policies being
enabled by default.
Issue warnings for CMake versions that are higher than the minimum
version but are known to cause issues when building Qt.
A counterpart change is needed in qt5 to ensure the minimum CMake
version is set at the proper time for top-level builds.
Ideally we would use the same 'check the CMake minimum version` code
in all our repositories, but that will cause lots of duplication because
we can't really find_package() the code and doing something like
include(../qtbase/foo.cmake) hardcodes assumptions about repo
locations.
So for now we don't bump the minimum version in child repo
cmake_minimum_required calls (qtsvg, qtdeclarative, etc).
Instead we record both the minimum supported version and the computed
minimum version (in case a different version was forced) in
QtBuildInternalsExtra.cmake.
Then we require qtbase's computed min version in
qt_build_repo_begin().
This won't set policies as cmake_minimum_required would, but at least
it propagates what minimum CMake version should be used for child
repos.
We might still have to bump the versions in child repos at some point.
Task-number: QTBUG-88086
Change-Id: Ida1c0d5d3e0fbb15d2aee9b68abab7a1648774b9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The top-level prepare_docs target is supposed to run before the
generate_docs target.
The repository-level targets like prepare_docs_qtbase now also run
before their respective generate targets.
To achieve that, several intermediate targets had to be introduced.
The dependencies for top-level generate_docs look like this:
/--> generate_top_level_docs_Core --\
generate_docs ---> generate_top_level_docs_Gui -----> prepare_docs
\--> ... --/
The dependencies for repo-level generate_docs_<repo> look like this:
/--> generate_repo_docs_Core
generate_docs_qtbase ---> generate_repo_docs_Gui
\--> ...
generate_repo_docs_Core --\
generate_repo_docs_Gui -----> prepare_docs_qtbase
... --/
Analoguous for qch_docs.
And last but not least, the module-level generate_docs_<module> depends
on prepare_docs_<module>, just like before.
The strangely named top-level install targets have been renamed to
install_html_docs, install_qch_docs and install_docs.
The html_docs target is now merely an alias for generate_docs.
Apart from prepare_docs, the top-level targets do not depend on the
repository-level targets anymore. Targets that are just an alias (docs,
install_docs, ...) have been re-defined to depend just on the respective
top-level targets.
Fixes: QTBUG-87758
Change-Id: I24466d3a252d518a30a2064bf876be881c46231f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add 3 new convenience custom targets:
'qt_plugins', 'qpa_plugins' and 'qpa_default_plugins'.
Additionally, if we detect that an internal executable / test
links against Gui, add a dependency on the 'qpa_default_plugins'
custom target, so that if a developer configures Qt for the first time
and then calls ninja 'tst_foo_check', we ensure the test will launch
successfully because the default QPA plugin will also be built.
Change-Id: If6dd70844b5effdf8a293f65f8785855cc85b132
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce a bunch of helper functions to manipulate compiler
flags and linker flags for the
CMAKE_<LANG>_FLAGS_<CONFIG>
and
CMAKE_<LINK_TYPE>_LINKER_FLAGS_<CONFIG>
CMake variables.
These variables can be assigned and modified either in the cache
or for a specific subdirectory scope, which will apply the flags
only to targets in that scope.
Add qt_internal_add_optimize_full_flags() function which mimics
qmake's CONFIG += optimize_full behavior.
Calling it will force usage of the '-O3' optimization flag on supported
platforms (falling back '-O2' where not supported).
Use the function for the Core and Gui subdirectories, to enable full
optimization for the respective Qt modules as it is done in the qmake
projects.
To ensure that the global qmake-like compiler flags are assigned
eveywhere,
qt_internal_set_up_config_optimizations_like_in_qmake() needs
to be called after Qt global features like optimize_size and
optimize_full are available.
This means that qtbase and its standalone tests need some special
handling in regards to when to call that function.
Task-number: QTBUG-86866
Change-Id: Ic7ac23de0265561cb06a0ba55089b6c0d3347441
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It causes issues in our Windows CI, because the strawberry perl
pkg-config is found. And even that one is unusable, due to a bug in
CMake which is tracked at
https://gitlab.kitware.com/cmake/cmake/-/issues/21239
Change-Id: I58816195d35459e8a44c923399c35a4956c222a2
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
The qt_build_internals_disable_pkg_config_if_needed function didn't
actually check if the pkg-config executable is available when turning
the pkg-config feature on.
This broke certain configurations like Android (on some hosts).
Try to find the executable and take that into account when computing
the value of the feature.
Task-number: QTBUG-85399
Change-Id: Ie79c637f2d2b689c392862c90075d309906fe506
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There are inconsistencies in the default optimization flags added by
CMake across configurations like Release and RelWithDebInfo.
In particular Release uses -O3, whereas RelWithDebInfo uses -O2,
as well as usage of /INCREMENTAL in release configs with MSVC, etc.
To make sure that the Qt 6 binaries built with CMake are consistent
across configs, as well as consistent with the flags we used when
building Qt 5 with qmake, add a horrible search and replace mechanism
to replaces the CMake flags with what our mkspecs indicate to use.
Ideally this would be done by providing custom CMake toolchain files
for each platform we support, and we might revisit that later if the
need really arises.
To implement the replacing, we first need the flags that should be
added. Port the QMAKE_CFLAGS_OPTIMIZE variables to CMake, which is
done in QtCompilerOptimization.cmake.
Then a new function called
qt_internal_set_up_config_optimizations_like_in_qmake will look for
any kind of optimization flags set in the
CMAKE_<LANG>_FLAGS_<CONFIG> style variables, remove them, and add
the appropriate flags that qmake mkspecs provide.
On some platforms (like Windows MSVC) the function also alters the
linker CMAKE_${TYPE}_LINKER_FLAGS_<CONFIG> style variables.
The mechanism allows opting out of this replacing by
setting the QT_USE_DEFAULT_CMAKE_OPTIMIZATION_FLAGS value.
It also allows opting into removal of flags for custom configs by
providing QT_ADDITIONAL_OPTIMIZATION_FLAG_CONFIGS. It's only removal,
because we wouldn't know what kind of config it is, and thus what
flags to add.
The currently modified configs are: Release, RelWithDebInfo,
MinSizeRel, Debug aka the usual default CMake provided ones.
The mechanism is only applied to C-like languages.
ASM is not handled to be on the safe side due to not knowing what kind
of compiler flags the platform assembler might take.
It's also important to skip RC on MSVC platforms.
Task-number: QTBUG-85992
Change-Id: I3712d5cd5a34fceab54f56a6fa46b4e678952362
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
QNX doesn't come with pkg-config support.
Task-number: QTBUG-83202
Change-Id: I2ac0c014a071b83ef9a2d8114bae0e9ff9b3b422
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Qt6 package was not found the tests were configured in-tree as opposed
to standalone tests.
Use the same trick we do for building examples in-tree.
Specify the path to the build tree packages, and don't create targets.
Amends 96e3ee0659
Change-Id: Ia60de416ce0afff5bd40be8c0c6e3c7898fd7ebf
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Certain resources and compiled jar files have to be copied into the
non-prefix build dir location. They were previously only installed,
which doesn't do anything in a non-prefix build.
Change pro2cmake to generate code that places the compiled java
jars into QT_BUILD_DIR, so that non-prefix builds work.
Place the module dependencies xml files into lib folder in non-prefix
builds.
Don't special case the output and install location of the Android QPA
plugin.
Task-number: QTBUG-85399
Change-Id: I4ac9d3929ea8ecc95ec99a77e621ad2121b68832
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qmake builds of Qt don't use libraries in /usr/local because the
path is not considered a system path. Only the SDK path should be
used as a source of system libraries.
We should do the same for the CMake builds, which involves a couple of
things.
Tell CMake not to consider /usr/local (and a bunch of other
paths) as system prefix paths.
Disable pkg-config usage which by default is not used in qmake
Windows and macOS builds.
If a user wishes to use libraries located in /usr/local on macOS, they
can explicitly enable the behavior via -DFEATURE_pkg_config=ON.
In addition to enabling pkg-config, that will also disable the system
prefix modification described above.
Implementation notes
To disable pkg-config usage, we set an empty path for
PKG_CONFIG_EXECUTABLE, because there is no other good way. The
downside to this is that a lot of warning messages will be printed
that the pkg-config package can not be found.
The pkg-config feature needs to be computed in QtBuildInternals before
qtbase/src/configure.cmake, because it's too late to do it in that
file where a few qt_find_package calls already exist.
The feature value is also saved to QtBuildInternalsExtra, to make sure
that pkg-config is disabled whenever building another repo.
System prefix adjustment is done by removing paths from
CMAKE_SYSTEM_PREFIX_PATH.
Ideally we would remove also /usr as a path, to match what qmake does,
but that breaks find_program() calls for perl, python, etc.
We have to make sure that qt_find_package does not look in
PATH when looking for packages, which is the default behavior, because
PATH on macOS most likely contains /usr/local.
One last curiosity for future generations is that CMake 3.18+ has
merged a change to prioritise SDK locations over regular /usr/lib.
Fixes: QTBUG-85261
Change-Id: I28fe5bae7997507a83b37b4eb1e0188e64062c57
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A developer could write 'ninja host_tools' to build the qtbase tools
and their dependencies, and then configure another cross-compiling
build dir pointing to the previous host build. This shortens the
workflow for cross-building when working in qtbase.
Change-Id: I69e70d23ce9df8669bcadf326d0586f097e5cb21
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT might be empty on the
first configuration, but because QtBuildInternalsExtra sets the
CMAKE_INSTALL_PREFIX, a second reconfiguration of a test would
stop setting the fake install prefix.
After some further consideration, there's no need to set the local
fake prefix conditionally, we can always do it (unless explicitly
opted out).
This makes sure that a reconfiguration of a test doesn't suddenly
install into the Qt prefix again.
Amends 37b132cd4e
Task-number: QTBUG-84346
Change-Id: Ic61aefe18418658455d8cdb9ebe6bcbcb8d67c99
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
And also fix qt-cmake-standalone-test to work for prefix builds.
The gist of it is that we have to protect tests not to be installed
into the Qt install prefix, but we also have to make sure that the
CMAKE_INSTALL_PREFIX is not changed globally (via cache value),
so that reconfiguration still works.
This took way too long to figure out.
Amends d6272d774c
Fixes: QTBUG-84346
Change-Id: I18c29574c9957fe05b86f701c8c14ec07e0f045b
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Aka handle CMAKE_INSTALL_PREFIX in a more relocatable way.
The following story inspired this change.
If a user wants to build a Qt repo into a different install prefix
than the usual Qt one, this will fail configuration because we
look for various things like syncqt, qdoc, etc relative to
CMAKE_INSTALL_PREFIX, which will now point to a different location
where none of the above tools are located.
The intent for such a use case is to support building Qt packages with
Conan, which sets a random install prefix when configuring a repo.
The idea is to derive the qt prefix dynamically from the
QtBuildInternals package location. Essentially it's a reverse relative
path from the QtBuildInternalsConfig.cmake file to the install prefix
that was specified when initially configuring qtbase.
Once the dynamic prefix is computed (so we know where the possibly
relocated Qt is), we can find tools like syncqt and qdoc.
This is an initial attempt to support a use case like that.
More design work will probably needed in case if tools / libs need to
be found in a location different than the Qt install prefix (so
support for multiple install prefixes / search paths).
An example of such a case would be when building qtdeclarative and
qtquickcontrols2 as Conan packages in one go. Most likely the
qmltyperegistrar tool will be located in the random install prefix
set by Conan, so building qtquickcontrols2 might fail due to not
finding the tool in the original Qt install prefix.
As to the implementation details, the change does the following:
- Dynamically computes and sets the
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX variable when
find_package()'ing QtBuildInternals. It's an absolute path
pointing to where the relocated Qt is.
- When building qtbase this variable is not yet available (due
to QtBuildInternalsExtra not existing), in that case we set
the variable to the absolute path of CMAKE_INSTALL_PREFIX
(but only for the initial qtbase configuration).
- Remove QT_BUILD_INTERNALS_ORIGINAL_INSTALL_PREFIX which was used
for standalone tests purposes. It's not needed now that we compute
the location of the Qt prefix dynamically.
- The Unixy qt-cmake and qt-cmake-private shell scripts now
use a relative path to find the toolchain file we created.
- The toolchain file also dynamically computes the location of the Qt
packages, and adds them to CMAKE_PREFIX_PATH.
- A lot of existing CMAKE_INSTALL_PREFIX uses are replaced with
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX. This includes finding
tool locations, mkspecs dir, path environment setup for tools, etc.
- Some places still use CMAKE_PREFIX_PATH in the following cases
- When determining paths while configuring qtbase (valid cases)
- When I wasn't sure what the behavior should be, so I left them
as-is (an example is documentation generation, do we want to
install it into the random Conan prefix, or into the main prefix?
Currently it installs in the random prefix).
Note that relocating a Qt installation does not work for non-prefix /
non-installed builds, due to hardcoded paths to include directories
and libraries in generated FooTargets.cmake files.
Task-number: QTBUG-83999
Change-Id: I87d6558729db93121b1715771034b03ce3295923
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Traditionally, these make targets generated HTMLs
and QCH only. This change fixes the dependency for
these targets to ensure that behavior.
Fixes: QTBUG-83877
Change-Id: Ic7c8afe5853d33fc4cc4cfd996f87e5f65df31ed
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Previously configuration of standalone tests might have failed
due to CMake trying to create files in the /usr/local default
prefix.
Make sure to use a fake prefix in the binary dir instead,
unless another prefix is explicitly specified.
Change-Id: Icfcb32285aa5596abf1a918396b26673880a8d27
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This patch allows all the sqldrivers to be built as a standalone project.
It is not possible to build each plugin separately due to the configuration
features definition being located in the sqldriver's folder CMakeLists.txt.
In other words, the project needs to be generated from the
src/plugins/sqldrivers/CMakeLists.txt file.
Fixes: QTBUG-82962
Change-Id: If41c7e3827589391830a894a9c998d2e56239562
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
