Add mkspec for the STMicroelectronic's ST7108 platform to be used in
conjunction with the -device support in configure. This allows you
to build Qt with the application libraries provided by STM SDK 35.
Change-Id: I36aa174200f034ccd6ee285e3f8a8ffec99b3e70
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Add mkspec for the STMicroelectronic's ST7540 platform to be used in
conjunction with the -device support in configure. This allows you
to build Qt with the application libraries provided by STM SDK 36.
Change-Id: I4369b23b9a0c9063417e5cc71969f65e967e4019
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
The naming convention for these libraries says that libGLES_CM is to be
used when EGL is included while libGLESv1_CM should be used when EGL is
not included. Since we have a seperate variable for libEGL, it
makes sense to have this variable represent the non-EGL version of the
library.
Change-Id: I9147c116da7be4a296a0ebeac39762b46725f10e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
There are two problems with the current design:
1. if (hooks) hooks->foo() doesn't work in debug mode when no platform hook
is defined. The problem doesn't arise in release mode because the compiler
optimizes away the if (hooks) into a no-op since hooks is NULL when no
platform hook is defined.
2. Adding a new hook requires changing every platform's hook implementation.
New approach:
1. Define QEglFSHooks as a class with virtual functions. A stub file provides
the default implementation.
2. Platform hooks derive from above class and reimplement whatever is needed.
The filenames and variables have been changed to be more in line with the
Qt style.
Change-Id: I2eaaa5ad7c8b48a06361c4747d4f210c428c983f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
It transpires that QNX 6.5.0 does not yet have libc support for the
gcc stack smashing protection.
Change-Id: Ic635662b6aa3ce2fad5f69e236386ae9ace420db
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Add mkspec for the Raspberry PI platform to be used in conjunction with the
-device support in configure. This allows you to build Qt with the
application libraries provided by the Raspberry PI foundation.
The Raspberry PI is described here:
http://en.wikipedia.org/wiki/Raspberry_Pi
and its use with Qt is documented here:
http://wiki.qt-project.org/Devices/RaspberryPi
Change-Id: Ib8d11d0a469edaaf34ccc04cf33a42a725fc2bdb
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
EGL provides an api to create a rendering context for khronos APIs
on native surfaces. The board initialization and window creation
is platform specific.
This commit adds platform hooks/extensions to the EGLFS plugin and
implements them for the Amlogic 8726M. The hook interface is internal
and there are no ABI/API guarantees.
EGLFS is now linked with -Wl,-no-undefined to make sure that a hook does not
add unresolvable symbols.
Change-Id: I7f4fcdb422aacbf00de468f4d8e85ae5368bfacf
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Removed the duplicated 'qnx' CONFIG defition from the mkspecs and declared it
on the common qcc-base-qnx.conf configuration file.
Change-Id: Ie215e3dd794762f20bec9c19afd5936a78a9d963
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Add mkspec for the Broadcom 97425 platform using the new device.pri
support. This allows to build Qt with the application libraries provided
by Broadcom.
Change-Id: Icad442be5da071e4f936e41236d4136234c5d16f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Since the library and almost everything got renamed to qml, we
should do so for the debugging support, too.
(CONFIG+=declarative_debug will continue to work for some time
being, but prints a deprecated warning).
Change-Id: I295155dce873e2585c1452d2bf0625ea6ce219c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This way if a module is found more than once, the list does not grow
duplicates.
Change-Id: I08e3e2a83453f45a49fe79e803a4b50d115709a3
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Using the same variable for multiple config files can lead to
conflicts.
Change-Id: Ie6a22618c4c2e64567874e5c7e8b278e067fedae
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Add mkspec for the Amlogic 8726M platform using the -device
support in configure. This allows to build Qt with the application
libraries provided by Amlogic.
The 8726M is an ARM Cortex-A9 that support NEON and has a Mali 400-M GPU.
Change-Id: I01ea0c8e7d34dcb165653980a1856f6e22318c4d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
A common issue for our users is that they do not provide the path
to their cross compiler or don't have it in their $PATH. Introduce
a qmake testFunction to sanity check the presence of the compiler.
Change-Id: I7d41db139d2a9c67334908b96e9f5e8f996426f6
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
That is not what depends is for.
Change-Id: Iabf93e890f009bd6c8fcc18dde1891bf20a493f1
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is the case for the winmain library.
Change-Id: I8f416e81ad8de4a1fb2f70a4ebc31c8351c81605
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The warning is presented now that we use __assume in every
Q_ASSERT. It presents itself in code that calls functions, like:
tools/qbitarray.h(128): warning #2261: __assume expression with side effects discarded
{ Q_ASSERT(i >= 0 && i < size());
^
Change-Id: I5851b3c35b56c00b9c541c2489233121ef621e04
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For some reference platforms and SDKs we will need to pass in
extra paths. Currently users have to modify the mkspec to adjust
paths or set environment variables that will be picked up.
This change introduces the -device <name> and -device-option
<key=value> option. The key value pairs will be written to a
qdevice.pri and can be used by the qmake.conf of the device spec.
The reason to not save the key value pairs in qconfig.pri is
becase of the fact that the device spec loads the qdevice.pri
earlier than the qconfig.pri. qdevice.pri allows the mkspec
to set the compiler flags and qconfig.pri allows configure to
add to those compiler flags.
Done-with: Holger Freyther
Change-Id: I931a197b8be72397e1eedfee09502eefc01c9d4f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Unlike QNX mkspecs, these mkspecs target more specific, BlackBerry-only
devices. So far, the only difference is the definition of Q_OS_BLACKBERRY
and linking with -lbps, but this will likely change with time. It will also
allow conditional compilation to distinguish between qnx and blackberry
devices.
Change-Id: Ia44e9b4059f720c308240e9dac7e90f7ae7920d0
Reviewed-by: Sean Harmer <sh@theharmers.co.uk>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
WinMain does not set MODULE, though it uses qt_module_config and
generates incomplete cmake files in the wrong locations as a result.
Change-Id: I5081a13a19469ab8cd01970a55684b8451bc79d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Include linux.conf instead of unix.conf, so it can compile Qt Base
these days (otherwise, we get an error from wayland-scanner.prf).
Remove the outdated information from the header. The mkspec now
matches ICC 12, not 10 and there are more diagnostics we disable.
Change-Id: Ic75593759a4d53f859a9a9e919d77b5c52d01024
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
- Changed installTestHelperApp() to use OUT_PWD path to find files.
(was looking in source tree instead of build)
Change-Id: If795c17a76aebcfbbe0d4f84c5df784a255ddb19
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qmake.conf already includes the linux-arm-gnueabi-g++ configuration;
this patch does the same for the platformdefs.h header.
Change-Id: I14ee4e406e8c00ae1a57140676f60d030daba18f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When built without fontconfig support, the basic unix font database
relies on fonts installed in libs/fonts to populate the database.
Change-Id: Id1e54c5b032095470049210bb831cfe4c79b3569
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Fixes those cases where things would magically link, although they were
everything but LSB compliant.
Also fix a linker error, it seems we need to explicitly link to -lrt,
otherwise, the non-LSB compliant system lib will be taken into account.
Change-Id: I40e278f1c4d2e02084c4c5f15b9bbff8c5901d32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This variable is there for documentation, but its not being used anymore.
There are two libraries from wayland, libwayland-client and
libwayland-server. Add two variables that will be picked up in the
QtWayland module.
Change-Id: I16219092a4ed2e48080921ce39f61192b6abb711
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Doing so works fine on Linux as g++ version there silently ignores
this. However, the qcc toolchain for QNX barfs.
Change-Id: Ia236910adc09dc1653e4169e20476b69c2de62ab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
qmake uses the variable name verbatim, which makes the generated
makefile look "interesting" without this cleanup.
Change-Id: If6c4f12563a0ee6429513fbfac534f40bb7c0b97
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
this makes the "sysrootable" properties more magic, with the raw
versions being omitted from the qmake -query output and automatically
falling back to the "cooked" variant if there is no sysroot set.
this makes the "normal" qmake -query less noisy. this will become even
more obvious when i add more "overloads" of the properties.
Change-Id: I08000986427264ec6238c8fe0a77f5cecdbf1201
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This changeset allows Qt to be built for QNX platforms in light of
commit d59e85d909.
Change-Id: Idf8e89cf1b0a5625ef7ee6397c223137fa151cdc
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
syncqt may generate that file also as a result of configure tests. so
just check for the file's existence instead of trying to reproduce under
which circumstances it should appear.
Change-Id: Ia24f96b05fc70e104f7be19d08cea614ffb505be
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Follow-up to d13bedb9d8
where the regexp was a bit too tight and missed many specs.
Also cleaned up QMAKE_IDC, QMAKE_RCC and QMAKE_IDL.
Change-Id: Ia15007141739019ef5ccfdda0c856c478f732b85
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the problem this (probably) tried to solve has been solved via ordered
builds a *long* time ago.
Change-Id: I84c58076c864735eea4210ec60aa060fe3e5d97e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it seems to be a no-op. presumably it was meant to be an auto-rebuild
hack like in moc.prf, but it wasn't really "wired".
Change-Id: I914456f5f5a63a06c2004b16edcf2e2ade448270
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Renamed from blackberry-* to qnx-* in order to match he <platform>-<compiler>
pattern.
Change-Id: I378151f3d564dd280943c74865a1d2b97215b656
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
otherwise we need the nasty hack for includes, and CONFIGs and DEFINES
from dependencies are not included at all.
Change-Id: I7eaee761161a6e8fbac8e9237d26559aa11a88a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Change-Id: Ib6787f982ff962cfdf3d8a0a26989489619a57b0
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
otherwise we are breaking the "less hacky" configurations. whoops.
Change-Id: Ibb037753fbaf30beae3d30173be77d48b978b60b
Reviewed-by: Caroline Chao <caroline.chao@nokia.com>
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.
the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.
-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.
adapted the qmake feature files and the qtbase build system accordingly.
Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
