These are time stamps, and they use toMsecsSinceEpoch(), no point
getting the time in Local time zone then converting it.
Change-Id: I2db2db5f9ebc062e65514a592fa7fa00cf1d179d
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qdbusxml2cpp takes a filename to use for generated output. It may be in
the form 'name.cpp' or just 'name'.
For the moc file we need to convert this from a path to a name of a file
in the same relative folder. It's not uncommon for this name to contain
dots as sometimes a dbus interface name is used directly. For the cases
where a suffix is not provided the whole name should be used.
Pick-to: 6.5
Change-Id: I3bf4ae8b2b9121184c2786009e8b5abcc5e3e410
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We will need it in QML to determine which signal out of a number of
"overloads" to generate handlers for.
Task-number: QTBUG-108762
Change-Id: Ib73eeb59dbf037bd03faf0d841860d9ebc9e7032
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This improves moc's support for nested inline namespaces, so that code
containing them will not break compilation.
For simplicity, we allow nested inline namespaces even in C++17 mode
(the actual C++ compiler will reject the code anyway, and probably with
a better error message than moc could output).
moc still has no real awareness how inline namespaces work, but that is
a preexisting issue.
Pick-to: 6.4 6.2
Fixes: QTBUG-106920
Change-Id: I7b415a99133575f101bc81d01d4670a5f752917f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amends 2d0c31e7d9. We were using
MetaTypeDecay in qTryMetaTypeInterfaceForType; but that is not used by
moc when complete types are enforced. Change qt_metaTypeArray to also
use qTryMetaTypeInterfaceForType, so that the code path for "force
complete types"[0] and the normal one do not diverge.
[0] Most easily enabled by using one of the QML type registration
macros.
Fixes: QTBUG-106672
Pick-to: 6.4 6.4.0
Change-Id: I9bf14873d1d0c4127a676643f7e8eb77f6e42dc8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
qdbusxml2cpp has a -m/--moc option. Change and modify the behavior
such that
-p foo -m includes moc_foo.cpp in the generated .cpp
-p :foo.cpp includes moc_foo.cpp in the generated .cpp
-p foo.h:foo.cpp includes moc_foo.cpp in the generated .cpp
Change the Qt6DbusMacros.cmake file accordingly.
[ChangeLog][qdbusxml2cpp] The -m/--moc option now generates
idiomatic moc file names (moc_base.cpp for headers, base.moc
for implementation files)(was: always base.moc). Build systems
using workarounds for the non-idiomatic naming of moc files
used by qdbusxml2cpp in the past can now drop these workarounds
for Qt versions >= 6.5.
Fixes: QTBUG-103313
Change-Id: I754b1b276f130cb8645166470e1b457a676590f7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This led to an infinite recursion in case the annotation was completely
missing. Instead of trying to fix that, I'm simply implementing the
"### Qt6" request from c62f717226 .
[ChangeLog][qdbusxml2cpp] Removed the old compatibility code that
accepted "In" annotations for signal argument names, introduced in Qt
5.8.
Pick-to: 6.4
Fixes: QTBUG-104722
Change-Id: Ie4bb662dcb274440ab8bfffd1709bfc3daf0846d
Reviewed-by: David Faure <david.faure@kdab.com>
We already had code to handle attributes on funtcions, but we didn't
handle them correctly for classes so far.
Fix this by simply skipping over the attribute.
Fixes: QTBUG-105310
Pick-to: 5.15 6.2 6.3 6.4
Change-Id: Ic4149f940e74820de4f2fa9540d9dc5b4e626a3a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Commit 3695b35dfc accounted for pointer to
other incomplete types, but pointer-to-void was missed. This caused an
inconsistency in the stored metatype for void*, which is a built-in type
(QMetaType::VoidStar) but no pointer was recorded.
The test in tst_moc hadn't been enabled because the functions in
questions weren't extracted by moc. That is fixed in this commit.
Change-Id: I6f936da6f6e84d649f70fffd1706f613517a75fb
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
BINDABLE should generally behave the same as MEMBER if "WRITE default",
except where it cannot. In particular we cannot know if any NOTIFY
signal should be sent from the synthetic WRITE accessor.
[ChangeLog][QtCore] moc will now synthesize WRITE accessors for
properties with BINDABLE if you specify "WRITE default".
Task-number: QTBUG-97249
Change-Id: I883c40ba0dda7989c840971860addaeaa75a8c83
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It's an opt-in warning that some people like to use. It was introduced
to clang 3.0.0 in 2011 by
98766db785
However, the feature is intentionally used here and the generated code is legit.
Make both sides happy.
Change-Id: I79335cd3a6a6cc128fa65f77d201a12f67424260
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qdbusxml2cpp's -i option uses "" for the includes.
However, an option to include with <> would be also
desirable, since some compilers may use a different
search strategy for <> than for "".
Add a new command line option -I/--global-include
to include the given argument using <>.
The new option will be used in qtconnectivity.
[ChangeLog][qdbusxml2cpp] Added command line option
-I/--global-include to include header files with <> in
the generated files.
Fixes: QTBUG-103362
Change-Id: If8e7f8b86440bdec53f2517db1ad460912664b20
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
You can't mismatch the export macros. The QT_MOC_EXPORT_PLUGIN_V2 macro
defines these functions as Q_DECL_EXPORT so they can be found by
QPluginLoader. We must match the macro here, otherwise GCC 12 complains
(tst_moc.cpp is compiled with -fvisibility=hidden):
tst_moc.cpp.o: non-canonical reference to canonical protected function `qt_plugin_instance' in moc_plugin_metadata.cpp.o
Pick-to: 6.4
Change-Id: Id0fb9ab0089845ee8843fffd16f99893d5730da5
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
We had the code to calculate the length, but were improperly using it
only for the offset, not the length of the string or its containing
array. That resulted in the generated moc output containing:
QT_MOC_LITERAL(111, 5), // "\xffz"
QT_MOC_LITERAL(114, 5), // "\0012"
QT_MOC_LITERAL(117, 23), // "slotWithAReallyLongName"
The two strings are described as occupying 5 bytes (length 4 + null
terminator), which is incorrect. The offset was correct: 114 - 111 = 3
and 117 - 114 = 3. The new output is:
QT_MOC_LITERAL(111, 2), // "\xffz"
QT_MOC_LITERAL(114, 2), // "\0012"
QT_MOC_LITERAL(117, 23), // "slotWithAReallyLongName"
The effect of the array size calculation would only be felt if moc
decided it needed a second string array (for strings over 65535 bytes),
which would cause the offsets in the second array to be all wrong. There
was no such test until now.
Drive-by fixing of the newline, indentation, and the stale comment
referring to QByteArrayData (Qt 5).
Pick-to: 6.2 6.3 6.4
Change-Id: Id0fb9ab0089845ee8843fffd16f9cd01b3e0709a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The behavior is similar to MEMBER: If the READ accessor is "default",
synthesize it using the bindable.
[ChangeLog][QtCore] You can now specify "READ default" in a Q_PROPERTY
if you also specify a BINDABLE. moc will synthesize a READ accessor in
that case.
Task-number: QTBUG-97249
Change-Id: I4a275adabaed12df95dac505095f847c4be65dfe
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It was previously understanding them as character literal delimiters,
with unfortunate consequences if a numeric literal contained an odd
number of them. Recognize that an apostrophe with a digit on each side
of it isn't the opening quote of a character literal (unless the digit
before it is preceded by a u). Extend the findMocs test to trigger the
bug, prior to the fix; verified it passes with the fix.
Fixes: QTBUG-98845
Change-Id: I5db3ac59aaeade7c2d6c1fb680ba97261ec0e8a9
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Revert the change to uic of 05fc3aef53.
Task-number: QTBUG-67283
Change-Id: Icfd83bb6d80b91d4e58f1be460f6772ba49a6921
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Because setObjectName() now takes a QAnyStringView, passing C string
literals is much more efficient than using QString::fromUtf8().
This patch only deals with setObjectName() as a known property,
probably from a name attribute. If the objectName property is set by a
<property> element (or so I assume), we still emit a
QString::fromUtf8(). Detecting objectName there would be too much
magic.
Besides, I haven't been able to find why sometimes there's a second
setObjectName call right after the first, when in the XML it seems all
kosher (name attribute and objectName <property> agreeing on the
content).
Change-Id: Icf07bad841ac735a9c744bbd955428ba15758089
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Use VERBATIM option to prepare the correct command line for the
add_custom_command. This especially sensitive when using build
directories with names containing special symbols, that cannot be
handled by shell correctly.
Change-Id: I51d7041cb806411135fd59bf6273c04a3c695443
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And remove their uses.
[ChangeLog][QtCore][Deprecation Notice] Deprecated QString::count()
and QByteArray::count() that take no parameters, to avoid confusion
with the algorithm overloads of the same name. They can be replaced
by size() or length() methods.
Change-Id: I6541e3235ab58cf750d89568d66d3b1d9bbd4a04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Relying on string manipulation leads to -Wredundant-parens warnings in
the best case, and to non-compiling code (when using typedefs) in the
worst case.
We can avoid both issues by simply generating code that uses
add_pointer, which takes care of reference types (even typedef'd ones),
and creates no warnings about parens (as we don't write any anymore).
Fixes: QTBUG-100915
Pick-to: 6.3 6.2
Change-Id: Ic5b1cbfda20d920d11f51beeb62e9479261d5f00
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
moc, qmake, rcc, and uic tests execute corresponding tools inside
the test executables. This adds dependencies explicitly, to execute
tests using _check targets, without the need to manually build
dependencies.
Pick-to: 6.3 6.2
Fixes: QTBUG-98576
Change-Id: I8b989276e21199b867591f7b0f6af9204695ac13
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The IGNORE directive was likely removed as an oversight
in the linked change.
This fixes the test to pass when bumping the Qt version.
Amends 9836dbd6ee
Change-Id: I497325d6d8b8b67cce7b0840bfb9bfa70d85fe73
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Change the minimum amount of buckets to be at least
128, ie. one full Span. This will simplify some assumptions
in the code.
Regeneration of rcc test-data needed because the extra buckets
causes the order of the keys to change.
Task-number: QTBUG-91739
Task-number: QTBUG-98436
Change-Id: Ic0c7da03570cc4c4e6aacc9645e536aec3667a98
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Like Q_NAMESPACE_EXPORT for Q_NAMESPACE, this variant of Q_GADGET
allows passing an export macro. This is useful to avoid exporting the
whole class just to get the staticMetaObject hidden therein exported.
Before anyone asks: No, we don't need Q_OBJECT_EXPORT, because QObject
subclasses, being polymorphic, always need to have a class-level
export macro (to export their vtable), but while that technique also
works for value classes (the Q_GADGET audience), it is not desirable
for them, because it makes inline functions exported in Windows debug
builds, which is not what we want, because it needlessly restricts
what you can to with the inline functions (e.g. remove).
[ChangeLog][QtCore] Added the Q_GADGET_EXPORT macro, which is like
Q_GADGET, but allows passing an export macro (like Q_NAMESPACE_EXPORT
for Q_NAMESPACE).
Fixes: QTBUG-55458
Change-Id: I546297de1e8aa45d83381991bcd3fbca61e1eef0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Having all *deployqt tools in qtbase will allow us to couple deployment
support more tightly with the build system.
Change-Id: I299efdacfa6b66a303bb3996ff3ff84e723210a5
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This hasn't worked for some time. It's not in our CI and I don't think
it was working at all. When I tried to build it, I ran into several
problems with C++17 and an Internal Compiler Error I did not have any
interest in working around.
After discussing with the Intel compiler team, it was decided that
fixing those issues in the old compiler is not going to happen. Instead,
their recommendation is to adopt the new LLVM-based compiler, which
the last commit added support for.
This commit does not remove qmake support for the old ICC. It's possible
someone is using qmake with a non-Qt6 project and ICC.
Change-Id: Icb2516126f674e7b8bb3fffd16ad6350ddbd49e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
They return a pointer to the actual header, skipping the magic string.
This is done in preparation for the header located in an ELF note, which
won't have the magic.
Change-Id: I3eb1bd30e0124f89a052fffd16a8229bec2ad588
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The .qtmetadata section is already suppressed for static plugins, but we
carried this unnecessary magic string. For library file formats where we
don't have a scanner (Windows COFF PE), a library that linked multiple
static plugins could end up with multiple metadata found.
We can't suppress the header because the version of moc could be
different to the version of Qt, so we need to read the header version
too. Right now, the version isn't output by moc (all the logic is in
qplugin.h), but this could change again in the future. In any case, 4
extra bytes are not a big deal, so the header stays.
Change-Id: I3eb1bd30e0124f89a052fffd16a82088d8303081
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tests/auto/tools/moc/CMakeFiles/tst_moc.dir/tst_moc.cpp.o: in function `tst_Moc::os9Newline()':
qtbase/tests/auto/tools/moc/tst_moc.cpp:1225: undefined reference to `Os9Newlines::staticMetaObject'
tests/auto/tools/moc/CMakeFiles/tst_moc.dir/tst_moc.cpp.o: in function `tst_Moc::winNewline()':
qtbase/tests/auto/tools/moc/tst_moc.cpp:1239: undefined reference to `WinNewlines::staticMetaObject'
Pick-to: 6.2
Change-Id: I629d67c1190e09b26dc09e41cb7170cb0eadf1cb
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Hopefully we won't need it but let's have it still at least for
consistency
Change-Id: I72289e65e5e5613174ad4d98cf8d614f9caae8e6
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The solution in d3ed7dac8a was needlessly
complicated, and broke a valid use case.
The issue of no identifier being available to parse after the include
has been processed can instead be solved by moving the test for the
closing brace after the include processing.
Fixes: QTBUG-94790
Pick-to: 6.2 6.1 5.15
Change-Id: Ieec4b89e1d117637f11479e8bddc4060f93da43d
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The QtTest best practices documentations recommends using output
mechanisms such as qDebug() and qWarning() for diagnostic messages,
and this is also what most of our own tests do.
The QWARN() macro and corresponding internal QTest::qWarn() function
was added when QtTest was first implemented, but was likely meant as
an internal implementation detail, like its cousin QTestLog::info(),
which does not have any corresponding macro.
This theory is backed by our own QtTest self-test (tst_silent)
describing the output from QWARN() as "an internal testlib warning".
The only difference between QWARN() and qWarning(), besides the much
richer feature set of the latter, is that qWarning() will not pass
on file and line number information in release mode, but QWARN() will.
This is an acceptable loss of functionality, considering that the user
can override this behavior by defining QT_MESSAGELOGCONTEXT.
[ChangeLog][QtTest] QWARN() has been deprecated in favor of qWarning()
Pick-to: 6.2
Change-Id: I5a2431ce48c47392244560dd520953b9fc735c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this change, next() was the only way to advance the iterator,
whether the caller was ultimately interested in just the filePath()
(good) or not (bad luck, had to call .fileInfo()).
Add a new function, nextFileInfo(), with returns fileInfo() instead.
Incidentally, the returned object has already been constructed as part
of advance()ing the iterator, so the new function is faster than
next() even if the result is ignored, because we're not calculating a
QString result the caller may not be interested in.
Use the new function around the code.
Fix a couple of cases of next(); fileInfo().filePath() (just use
next()'s return value) as a drive-by.
[ChangeLog][QtCore][QDirIterator] Added nextFileInfo(), which is like
next(), but returns fileInfo() instead of filePath().
Change-Id: I601220575961169b44139fc55b9eae6c3197afb4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There's a chance that this would be used in some macro, so why not test
that this thing works in general (especially since it actually works)
Change-Id: Ib9d91fbd17cf16675ae89a99f010dacc5d30967a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Triggered by API review in Gerrit patch 355960.
Task-number: QTBUG-94407
Pick-to: 6.2
Change-Id: I7cafc1cc9d4b929040b53c6bf92c91d73c3b39f2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The relevant test is conducted by tst_Moc::warnOnVirtualSignal(),
added in 2009, <quote>
Fix Warning saying that signal cannot be made virtual
The test for virtual signal did not work.
But we cannot make an error right now or it might break existing code
(exemple in task 210879)
</quote> but without removing the #include, so we do still get a
warning about that when building tst_moc.
Pick-to: 6.2 6.1 5.15
Change-Id: I5ea18058f22bbd483d1ff18b0ca7b360f6674ed9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Needed for QML compiler to know property index of C++ type at
compile time without going through QMetaObject::indexOfProperty
Change-Id: I404e71d6071d36812661df17d12b879a8dcbd146
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Use class WriteIncludesBase and store classes encountered in a
per-module hash (Qt/custom widgets). Write out only the required
classes.
Add --star-import as a fallback should the change cause issues.
Task-number: PYSIDE-1404
Change-Id: Ic50e26758ddd0f2f8aebbce470d32a36fb09a2c4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
The BASE argument of qt_add_resources now denotes the root point of the
alias of the file. Before, BASE was merely prepended to every file that
got passed to qt_add_resources.
Old behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "images/button.png")
Alias is "../shared/images/button.png", and pro2cmake generated
QT_RESOURCE_ALIAS assignments to fix this.
New behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "../shared/images/button.png")
The alias is "images/button.png". No extra QT_RESOURCE_ALIAS assignment
is needed.
The new behavior is in effect for user projects and for Qt repositories
that define QT_USE_FIXED_QT_ADD_RESOURCE_BASE. Qt repositories will be
ported one by one to this new behavior. Then the old code path can be
removed.
Pick-to: 6.1
Task-number: QTBUG-86726
Change-Id: Ib895edd4df8e97b54badadd9a1c34408beff131f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
