Now we take into account also the subrole of the element.
Change-Id: I471e7c6620e704780cef48266ef302ec8b56466d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Not tested as I have no idea what VoiceOver uses it for (it seems to
never query this attribute during any operation I tested).
Change-Id: Ie5e2b765a9956bcf2be9b659b8914e393ed1ea90
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
This enables users with "Speak text under mouse after delay" set in
VoiceOver Utility > Verbosity > Announcements to hover mouse over text
in QTextEdit and have it spoken by VoiceOver. It also allows users with
Trackpad Commander on to interact with the text area (VO-Shift-arrow
down) and "touch-explore" the text while holding their finger on the
trackpad and moving it around.
[ChangeLog][QtWidgets][Accessibility][OS X] VoiceOver users of QTextEdit
can now use mouse and touch exploration on trackpad to point at text to
have spoken to them.
Change-Id: I6cfaa8b1ff2179cce027b22539ba9ee4f3ee7f3f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
When returning a rect for AXBoundsForRange, we always incorporated one
more character. Along with this one more character being often either a
newline or the first character of new softline, visual bounds often got
wrongly and unnecessarily multiline when in fact only single line was
correct.
Also noticeable when moving character by character (VO-Shift-arrow
left/right) - now only one character is being shown (as opposed to two
before). Still due to VoiceOver bug, for bounds of width less than 8
points, it will draw bounds width with of 8 points (reported as
<rdar://problem/19370707>). But still this is an improvement for cases
with bounds of width more or equal to 8 points.
[ChangeLog][QtGui][Accessibility][OS X] Visual bounds returned by
QTextEdit were singificantly improved, this enables VoiceOver to draw
properly positioned VoiceOver cursor.
Change-Id: Idc50310f8016fbcc01b061d27b655c72922a4807
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Add the NSOpenGLPFANoRecovery pixel format attribute.
This disables the software rendering fallback and
makes compositing OpenGL and raster NSViews using
Core Animation layers possible.
With QT_MAC_WANTS_LAYER enabled, native NSViews now
stack correctly with QWindows with OpenGL content.
One known limitation is that this mode currently
supports main-thread rendering only.
Change-Id: I2060cceda846b305b33b47f2eba3cb7cb838039c
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
The QWindow and QCocoaWindow may be deleted
before the QNSView (which Cocoa keeps a reference
to).
Clear pointers to the Qt windows on QCocoaWindow
destruction and add null-pointer check to QNView::isOpaque.
Change-Id: I71764886c27bf1d14fb4e684c15e7c72e1c0a17c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Adds conversion from QJsonArray and QJsonObject, and report missing
conversion failures for other QJsonValues.
Change-Id: Ic0c3a952657912401db877b068f7fcc3c08c94c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We're documenting that this context exists, therefore applications
are allowed to assume that it exists. For the same reason, we
should expose it as public API -- an application should be allowed
to upload GL objects before creating or showing QOpenGLWidgets
that use them.
Change-Id: Iedbba7cd393018d93833fd2a6b02cce0639a89b4
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Don't use index-based iteration, but use iterators.
Change-Id: If8dabd56ff880191bb53861e31bfa6a007802c9c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of filling a QString with lots of temporaries in-between,
simply stream everything into QDebug directly.
Requires the use of #ifndef QT_NO_DEBUG_STREAM because of the
explicit mentioning of QDebug.
Further simplified it by removing the complicated trailing-comma
handling. The struct-like output can tolerate a trailing comma
which has been allowed in C/C++ since its inception.
Change-Id: I0393a37cd21a50e902c8cb9f8b752ebb946d1669
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It is no longer required since registered enumerations now
have an output operator for QDebug.
Change-Id: Ib85be4b98f301993c6cda2638b84586d541af841
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
QPlatformTheme::keyBindings() performs a binary search
into an ordered list of StandardKey -> Key Sequence
mappings where each StandardKey can have multiple
key sequences.
Previously the order of the Key Sequences in the
returned list would be indeterministic and, except
for the designated pri-1 key sequence, would not
necessarily correspond to the list order. (The
ordering was dependent on where the binary search
"hits", which again depends on the size of the list.)
This caused trouble when adding mappings, since it
would change the order in the returned key sequence
list for existing mappings and confusingly cause
(apparently) unrelated test failures.
Fix this by replacing the manually coded binary search
with std::equal_range.
One test case needed to be fixed up because it had the
result in the wrong order (verified by looking at
QPlatformTheme::keyBindings).
Change-Id: I555ca2736b1a8e6454dc79645a8246f80119cfc2
Done-with: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Make sure from{JulianDay,MSecsSinceStartOfDay}() are in a constexpr'able form
by introducing new private ctors that allow formulating these functions as
single expressions.
Change-Id: Iee98edb74e63c32e98781b885bbb2c5ef5867fd9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not that many, if any, uses of sprintf here were idiomatic Qt,
but that's for another commit.
Change-Id: Ic34470d9799942f786770ba9541b29c34d67c6f8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This also enables NRVO in almost all callers (a macro
prevents it in one case), saving one default construction
and one (move) assignment per call.
Effects on Linux GCC 4.9 stripped release builds:
text -896B
data +-0B
relocs +-0
Change-Id: Id3cde01057baaa408c4cbf95d8d15eaeeeec1604
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Bring them into a constexpr'able form, by indexing into the
string literal directly instead of into a static const char[],
which is a declaration not allowed in a C++11 constexpr
function, then mark the functions constexpr.
Change-Id: I6b32a55bf24f85caeb980c0c855b8db0952f914c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We don't have any hotplugging support in evdevtouch so all we can do
is to increase the number of touch devices by one. This makes the
behavior compatible with libinput which already does the proper bookkeeping.
Change-Id: If2ab08dc931839c0b2e7080db766574a293edf4c
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
The comments at the top are simply out of date. With modern toolchains
-no-gcc-sysroot causes only trouble.
Similarly, enable hardfloat by default.
Change-Id: I80a1319ae26a6e0a8af71e07fbc43478a2b905ef
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
clearly, it's not very useful if nobody noticed it yet. anyway ...
Change-Id: Ieef1593e42031f8c17a3d7e9e67e3194ded9c066
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
To ensure QtCore can be rebuilt and get the exact same results,
it is undesirable to hardcode the build date into the library
Also deprecate QLibrayInfo::buildDate since it is relies on the build
date. QLibraryInfo::buildDate was originally meant for evaluation
licenses and such, but isn't used for that any longer.
Change-Id: I98e91ca3e55f877e6ac0e02de289dc29422fc9da
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
There doesn't seem to be a need for a timestamp in the include guard
anyway. The class name and similar stays the same, so it seems to just
add randomness to the build because it is possible.
Change-Id: I186d281d7ec4a3db08a128ca170e455132930cba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make QTextView accessibility on OS X mirror that of NSTextView in terms
of translating between positions and line numbers.
Most significantly, we report softlines (i.e. "lines" resulting from
visual wrapping induced by text view's width) as individual lines, not
just hardlines (i.e. "lines" delimited by newline characters, a.k.a.
paragraphs). This fixes keyboard echo when using just arrow up and down
(without VO prefix) as now in such case VoiceOver reads the softline
that the text cursor moved to; before this fix it read again the whole
paragraph (which it read no matter to which softline of paragraph we
moved to). This enables the user to search more effectively for the
softline they need (which they do very often when navigating text).
Further, we changed the behavior to report the trailing newline
character of a line as the last character of the line. This is
consistent with how NSTextView (and TextEdit) does things (and makes the
newline character be displayed on a braille display for the user to be
able to distinguish that this is really the end of paragraph), but could
be debated and changed as some important Apple apps do not include the
newline character in the line range (most notably Pages and Mail, both
in the document (or email text) text area). I asked about this here:
http://lists.apple.com/archives/accessibility-dev/2015/Jan/msg00000.html
This also fixes the case where empty line previously returned empty range
(length == 0) for AXRangeForLine and VoiceOver interpreted that as end of
document even if it was in the middle of document (e.g. in
examples/widgets/richtext/textedit, there is an empty line in "Lists" section
just before the last paragraph, if one attempted to move past it e.g with
VO-arrow down after interacting with the text using VO-Shift-arrow down, then
no luck).
The code is currently O(N) as the previous one, which could mean a performance
problem for bigger documents. As it seems QTextLayout has all the information
it needs to do AXLineForIndex and AXRangeForLine efficiently (I would presume
O(log N)), this should be eventually rewritten to take advantage of
that (but the required interfaces are not currently exposed through
QAccessibleTextInterface)
[ChangeLog][QtGui][Accessibility][OS X] QTextEdit now properly reports
to accessibility visual lines (softlines) as lines, instead of whole
paragraphs. This allows better VoiceOver user experience when reading
text line by line using arrows up/down.
Change-Id: Ie7f06eb919de31d0a083b3b30d26ccac4aa27301
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Change-Id: I643049a865b0a8936e132e12f7845d5527f4f808
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
Reviewed-by: André Klitzing <aklitzing@gmail.com>
The various refactorings to this code allow it compile and work
on Windows CE, so we can enable the build there.
Change-Id: I8ac56e87dca13790a76f125330a5400e4b4f5d46
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Haiku supports the realpath implementation, but failed the
original #if check because of the wrong _POSIX_VERSION.
Change-Id: Ibad12de3bf7c1031b2dff3026b5c61e5afd3f3e6
Reviewed-by: Augustin Cavalier <waddlesplash@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use an existing, non-symlinked directory for the unit test.
Change-Id: Ice9976a4fd10c42c3cb014614ccd699bcea1065f
Reviewed-by: Augustin Cavalier <waddlesplash@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The _POSIX_VERSION declared in Haiku is 199009L, so we have
to enable support for setenv/unsetenv explicitly until
Haiku POSIX version is updated.
Change-Id: Ic22374253b0512a6a816257db83b0c649be0585d
Reviewed-by: Augustin Cavalier <waddlesplash@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
TabAllWidgets in QPlatformTheme is replaced by TabFocusBehavior.
[ChangeLog][QtGui] Expose TabFocusBehavior in QStyleHints
Change-Id: Iafaad7c6a5c6bc888d1e124e6ddcdbdc46f37b1c
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Followup to 2203d9d93e: clearRegion takes
a little time, so doing grabWindow() too soon afterwards can result in
grabbing a pixmap with undesired leftovers. And doing it every time
we render the icon causes flicker. So, do clearRegion() ASAP when showing
the icon, wait for it to happen, then grabWindow() only the first time we
render, and reuse the resulting pixmap for all future calls to paintEvent().
(The downside is, if there is any corruption during the first grabWindow(),
it's going to stay there as long as the app is running.)
Task-number: QTBUG-35658
Change-Id: If881ab192dba43758dcbb0d080663ff42057fa4f
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Until now, only the Gnome and KDE themes have done this. But
the gtk2 theme is not the same as the gnome theme. Further, Ubuntu sets
the environment variable QT_QPA_PLATFORMTHEME=appmenu-qt5 if that
plugin is installed on the system; and then with a custom build of Qt
which cannot load the module (e.g. a static build), it will again
fall back to QGenericUnixTheme instead of the gnome theme. In both
cases we want to still try to use D-Bus StatusNotifier protocol
instead of XEmbed. In general it should always be safe to check
whether or not that is possible, before falling back to the XEmbed
tray icon implementation.
Change-Id: I86d6c6f6ad410ea31770d39166d0a7e3330365a0
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
QSharedDataPointer is declared in qshareddata.h, not qsharedpointer.h
Change-Id: I4702f346ae01a8de07a6a9b50f951d2d4a89e1fb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Short version: fix build on QNX 6.5.0.
C++11 has been included on QNX 6.6.0's libcpp (Dinkum C++11 libs), while
continuing to be unsupported by the older QNX 6.5.0 toolchain.
This patch updates the mechanism for detecting the QNX's libcpp that is being
used during compile time, and also updates the list of C++11 features to be
disabled when QNX C++11 support is not present by adding
Q_COMPILER_UNICODE_STRINGS and Q_COMPILER_NOEXCEPT to it.
Change-Id: Iddb3626206a0d97d7103c1ff17ba0ae953e9a4b9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The phase changes to ScrollEnd as soon as the user's fingers
are lifted from the trackpad; then the OS can optionally continue
sending scroll events to simulate deceleration, which are translated
into more QWheelEvents with phase ScrollUpdate. With this patch,
the phase of the final event after the momentum phase will be
ScrollEnd to indicate that the scrolling is completely finished.
[ChangeLog][QtGui][QWheelEvent] on OSX, trackpad wheel event phase
transitions occur in the order ScrollBegin, ScrollUpdate, ...,
ScrollEnd, ScrollUpdate, ..., ScrollEnd, where the second batch of
updates represent momentum events (inertial scrolling).
Change-Id: I7404ed6fbbeaff6b1fa63e226fe1800494986b7b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Use the
QDebugStateSaver saver(debug);
debug.resetFormat().nospace();
idiom to unify the formatting and whitespace handling.
Change-Id: Id346d63b3f589b60ca19e4459271d587f1a0c003
Reviewed-by: Richard J. Moore <rich@kde.org>
In case CreateFontIndirect() call fails, always fallback to a better
stock font provided by Windows (apparently, it is DEFAULT_GUI_FONT).
Change-Id: Ib78fe0d21ba4fccbba1152b81ed87c010e1220e0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
