Initialize directory delayed in shared code and add checks to verify
that it is valid. Close attached / cloned databases to prevent locks
on files and leaking temporary directories caused by SQLite:
QTemporaryDir: Unable to remove "...\Temp\tst_qsqldatabase-P1XkOA" most likely due to the presence of read-only files.
QTemporaryDir: Unable to remove "...\Temp\tst_qsqltablemodel-P1XkOA" most likely due to the presence of read-only files.
QWARN : tst_QSql::concurrentAccess() QTemporaryDir: Unable to remove "...\Temp\tst_qsql-l0VAKJ" most likely due to the presence of read-only files.
Change-Id: If85bbaed04bb1a32e427d642be332996d967f796
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Adapt the stringification code, that is used to produce the
keys for QSqlQuery::boundValues() return value, to keep the
right order of the binding values.
Task-number: QTBUG-12186
Change-Id: Ic11a455bfd9ffd1418b1b021ce5cf78cae9b4504
[ChangeLog][QtSql] Fixed the order of values with positional binding in a QSqlQuery
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Each model test gets its own temporary directory, thus there is no problem parallelizing them.
This should reduce the time spent for a testrun of qtbase by around 3 minutes.
When running only the sql tests it saves less since there are no other tests to run in parallel.
=== Timing: =================== TEST RUN COMPLETED! ============================
Total: 4 minutes 43 seconds
Serial tests: 4 minutes 42 seconds
Parallel tests: 1 second
Estimated time spent on insignificant tests: (no time)
Estimated time saved by -j4: 1 second
=== Totals: 12 tests, 12 passes ================================================
After:
=== Timing: =================== TEST RUN COMPLETED! ============================
Total: 4 minutes 7 seconds
Serial tests: 50 seconds
Parallel tests: 3 minutes 17 seconds
Estimated time spent on insignificant tests: (no time)
Estimated time saved by -j4: 1 minute 23 seconds
=== Totals: 12 tests, 12 passes ================================================
Change-Id: I355ceed62fae852ad8cd442848e263438afb738e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some database systems (like PostgreSQL) use alphanumeric error codes.
Introduce a new method nativeErrorCode() which replaces number().
If the error code cannot be converted to int, number() will return 0.
Task-number: QTBUG-142
Change-Id: Ic7fba841737674b75c0c01c2263f51d2041da497
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Introduce isNull overload to take field name as a parameter.
This is corresponding to the commit
7e6e141234
Change-Id: I122f79707d26eaa09c2f38dc31aeee1dac7de33b
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
the method returns true if there is not such field.
Change-Id: I25db8de4561d3e0604f3e64edc1810140ba4aad2
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Except where we're actually testing QCoreApplication::applicationName()
and friends.
Change-Id: I25514884c11f43a4f82b1f818f822dc3d79f69a3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This removes some XFAILS that were no longer correct and
fixes some existing problems in the tests where ODBC is
concerned.
Change-Id: I91de526bb50ad4046ba07ddb5336aa3714966687
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Oracle has a limitation of 30 characters for a tablename so the main
change is to account for this, which meant changing all the usages of
qTableName(). Some other fixes are included that ensure the tests are
working correctly as far as Oracle is concerned.
Change-Id: I8ad8a5a33e6a70fcad235f6a7e82e91687b74fee
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
By moving it to QSqlDriverPrivate we make it easier to check what
database is actually connected which is particularly useful for the
autotests.
Change-Id: I54d1c2c998919c1d54efb1b6ac9303070ece54aa
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The QODBCResult::exec() returns false when query is an delete
with no data do delete caused by SQLExecute function returning
SQL_NO_DATA, but the false return means error on execution.
Task-number: QTBUG-10569
Change-Id: I6c7ebadcf62ab404b60c7bcccdab6a10bf16a923
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Parsing for bound SQL parameters now handles identifier quoting using
double quotes (") and square brackets ([]).
The following has only 1 bound value but previously 2 were detected:
SELECT 1 AS "A?b[?']]]de?ghi", ?
Task-number: QTBUG-27159
Change-Id: Icfd02187e1126ff3b5ed11df8d4e599f574e61bf
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
revert() should operate in OnFieldChange edit strategy just as
submit() does. The reason in Qt 4 for excluding OnFieldChange
was that there was no opportunity to revert. The model was
refreshed, causing all changes to be lost. In Qt 5 a failed
edit remains in the cache until user action, which could be
to revert.
Change-Id: Ide021c4f83a53834b7ed81f2abfa3aa49317704d
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Previously, selectRow() did not work after INSERTing a new row into a
table with an automatically populated column. It did not work because
the model did not know the primary values for the new row. Newly
inserted rows were therefore not refreshed in OnFieldChange and
OnRowChange edit strategies.
This change provides support for the typical simple case where a single
column is populated by the database and can be retrieved with
QSqlQuery::lastInsertId().
Task-Number: QTBUG-29102
Change-Id: Ibf0f0ac8661185bde57034ddf40c2178bece4778
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Lukas Geyer <lgeyer@gmx.at>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Commit 10ff9de91b introduced the
optimization of ignoring non-changes, but it overshot the mark.
It neglected to consider that QVariant's equality operator does not
compare the null flag. It also failed to consider that setData() has
a useful side effect of setting the generated flag in a column of a
pending INSERT. This is important when the application actually wants
a NULL to be inserted into the column.
Task-number: QTBUG-29217
Change-Id: I1368f7acc21eebfeb5a8d23746fc38f6f30fd395
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
QSqlQueryModel::headerData() relied on virtual indexInQuery() to
detect whether the requested column at row 0 mapped to an index in
the query. This failed when row 0 was a pending insert managed by
QSqlTableModel, and therefore not in the query.
The only thing that matters here is the column.
Task-number: QTBUG-29108
Change-Id: I3e0ae85ba223e444781ec8033386d394bb44f0e8
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ifd116dee32a450ff89a9a1011e26b434765d6e95
Reviewed-by: David Faure <david.faure@kdab.com>
As they are built-in, they are effectively registered at compile-time
already.
Change-Id: I7ae6ba16088eab5d19213fa7b07c2a7760988a86
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Some things needed to be corrected for testing with PSQL, this was
checked against the the PostgreSQL documentation to confirm that the
exepected behaviour is correct.
Change-Id: I45a6b343e9eb920fcae2a62910ecc956abcac0f0
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change-Id: Ib05a120db16f65d9833663445c028971d4de3d29
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
With the change cff46983a, prepared queries can now store a
named paramater to be used more than once.
When using ?, thus positional binding, there is no named
parameter, thus there is no need to store it.
When prepare is called from a query with ?, it currently
causes an error when the feature QSqlDriver::NamedPlaceholders
is true. Because holders values are called while holders is
actually empty.
QSqlDriver::NamedPlaceholders is true for QOCI plugin only
but the problem is independant of the plugin used.
Adding a test case with a test driver to make the test runnable
without Oracle installed.
Change-Id: I6d7491f7e09a7b62d2d4d216b40fedd67e927e27
Reviewed-by: Matt Newell <newellm@blur.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
geometryengine.cpp: In member function 'void
GeometryEngine::drawCubeGeometry(QGLShaderProgram*)':
geometryengine.cpp:159:93: warning: cast to pointer from integer of
different sie [-Wint-to-pointer-cast] geometryengine.cpp:167:95:
warning: cast to pointer f rom integer ofdifferent size
[-Wint-to-pointer-cast]
benchmarking.cpp: In member function 'void TestBenchmark::multiple()':
benchmarking.cpp:85:9: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
benchmarking.cpp: In member function 'void TestBenchmark::series()':
benchmarking.cpp:120:9: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
qstandarditemmodel.cpp:2717:45: warning: unused variable 'd'
[-Wunused-variable]
qxcbconnection.cpp: In member function 'xcb_timestamp_t
QXcbConnection::getTimestamp()': qxcbconnection.cpp:930:40: warning:
suggest parentheses around assignment used as truth value
[-Wparentheses]
tst_qguiapplication.cpp: In constructor
'BlockableWindow::BlockableWindow()': tst_qguiapplication.cpp:340:9:
warning:'BlockableWindow::enters' will be initialized after [-Wreorder]
tst_qguia pplication.cpp:339:9: warning 'int BlockableWindow::leaves'
[-Wreorder] tst_qguiapplication.cpp:342:12: waring: when initialized
here [-Wreorder]
tst_qsqltablemodel.cpp:570:10: warning: unused parameter 'value'
[-Wunused-parameter]
tst_qabstractitemview.cpp:1546:8: warning: unused parameter 'index'
[-Wunused-parameter]
Change-Id: I49c88547182e4669cfde2c2536403fc5573ca2da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The error and message handlers used by the freetds library were getting
reset to back to the default every time a database was opened. The
Qt TDS SQL driver was calling dbinit() from QTDSDriver::open(). This
had two problems:
1. dbinit() would reset the error handler previously set by a call to
dberrhandle(). A db error would then cause the application to
abort.
2. freetds expects dbinit() and dbexit() to be called symmetrically.
Opening multiple database connections would result in freetds not
cleaning up on application close.
Solved by moving the dbinit() call into the QTDSDriver constructor.
Change-Id: I59018d83238672c903b96a4d7f3f21b664c3ff4c
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
MYSQL_TYPE_TINY should be used for binding bool input value.
MYSQL_TYPE_LONG might be too big for bool, resulting in bools being
saved in the database as int 127. The problem was not specific to
the vendor's BOOL column type.
http://dev.mysql.com/doc/refman/5.0/en/numeric-type-overview.htmlhttp://dev.mysql.com/doc/refman/5.0/en/c-api-prepared-statement-type-codes.html
Added generic autotest to make sure that binding bool works. All
drivers should pass this test.
Task-number: QTBUG-27763
Change-Id: I4e69f8e3b32fffb702ec9fa8a80ff5c50dea954b
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Introduce value overload to take field name as a parameter.
This allows for terser application code that avoids explicit
calls to QSqlRecord::value().
Change-Id: I02b6712cd5ec41633b902714315b5716c17d1a9b
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Test added.
Change-Id: Ibd72ef2aeee482abbd22991573460e55dc577457
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: David Faure (fixes for KDE) <faure@kde.org>
Commit fbf010a266 introduced a version
of record(row) that includes the generated flags, but it neglected to
populate the values using virtual data() as QSqlQueryModel correctly
does.
Test included lest we forget again.
Change-Id: I49d0f8f87cd0c5078aa6a0e8373b2cffc01f2387
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
setRecord() should use setData() as intended so that reimplementations
of setData() in subclasses will be respected.
Commit 11bd543d90 failed to consider this.
Test added which should prevent this mistake being repeated.
Change-Id: Ia2d930cd42b5a27521bb389edb1b07fb1bf0fa36
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This is good for performance in terms of avoiding unnecessary
database activity and keeping the cache smaller.
Detail:
This change was not included in the big refactoring of QSqlTM. The
idea was that the model shouldn't second guess the intention of the
application and maybe the application wants to cause a submit.
It was a marginal consideration.
Now I think it's clear that our interest in not unnecessarily
expanding the cache outweighs that. In addition, applications can now
call selectRow() if they worry that the database values for the row
have changed and want to set a value back again.
Test added.
Change-Id: I63814dcb63a96c6ba1c8cc227807725a954a0b68
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: David Faure <david.faure@kdab.com>
The STL-style iteration over the cache in submitAll() assumed the
iterator would remain valid until reaching cache.end(). This failed
to consider that virtual selectRow() might be overridden so that
it removes rows from the cache. For example, it might call select()
which would empty the cache.
The new approach checks at each iteration whether the row is
still in the cache. Using foreach here is justified by its fitness
for purpose and readability.
New test included.
Change-Id: Idee8807ede239c3ba56ff1604574c49f47385ad2
Reviewed-by: David Faure (fixes for KDE) <faure@kde.org>
This method was originally intended for refreshing rows after
submitting changes. It should also work for refreshing rows
that are unchanged (i.e., not cached), but did not because
constructing the primary values depended on the cache. As a
consequence, the WHERE clause for the query was not created.
Fixed by deriving primary values for uncached rows from the
query record. Note that the cache is still authoritative for rows
it holds. This is important because the prmary values there may
differ from the original query record due to changes to columns
of the primary key.
Includes new test.
Change-Id: I41cca2cbf26019d4b495ffa6d876e2b55ec57803
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: Ie395d82d17710683968d006d22de313ef49dc6e5
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Follow-up to 83c9ebbd66.
Consider the case where calls to the reset methods on the same object
are nested as in the following sequence:
1. beginResetModel()
2. beginResetModel()
3. endResetModel()
4. endResetModel()
In such cases, only the outermost calls, i.e., 1) and 4), should emit
signals.
After 83c9ebbd66, 1) and 3) emitted the
signals, which is wrong. This is corrected by keeping track of the
nesting level.
Such sequences can come about when a base class calls the begin/end
methods between the calls made by the subclass.
QSqlTableModel::select() is an example of this.
Test included.
Change-Id: Ia62b45cb1abaab00a32bb8357de4a958bcff83e5
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
SQL Server 10 introduced stricter rules for TIMESTAMP validation,
making it necessary to specify the decimal digits.
Other databases might do the same as well, so this patch introduces
a check for the TIMESTAMP column size and adjusts the decimal digits
parameter as needed.
Task-number: QTBUG-2192
Change-Id: If6d798c6c928ebda75bc474e49a07fbbfbe5816c
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
The file has been UTF-8 encoded for years, which means that the line:
QString longerBLOB( "abcdefghijklmnopqrstuvxyz¿äëïöü¡ " );
Loaded a mojibake into QString. Then, this data was stored as a blob
in the database by calling longerBLOB.toLatin1() (a QByteArray), and
reloaded for check using toString().
Once the QString default codec changes to UTF-8, the mojibake would
get fixed, and the test would fail. Make sure it doesn't happen.
Change-Id: If12d6124c973e4a1c1b7978d90fffb9aa5545c66
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Icb3ab0e1f4f3173563f3de36115b5457cf1ba856
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Previously the method attempted to reset only as a last resort.
Now reset() is deprecated and resetting must happen between emitting
modelAboutToBeReset() and modelReset(). Since this suffices in all
cases to notify views that they must reinterrogate the model, it is no
longer necessary to signal explicitly row removals and insertions
within the scope of the reset.
Additionally, fetchMore() is now called within the scope of the reset
so insert signals do not have to be emitted here either.
This improved handling of resetting in QSqlQueryModel also allows the
cache in QSqlTableModel to be cleared directly at select().
This change may actually allow views to operate more efficiently since
they no longer have to react to separate row removal and insert
signals. Views can avoid pointless deallocation and reallocation
by considering row count only after the reset is finished. The cost is
that the columns and horizontal headers must be considered in the view
at each setQuery() call. In any case, it is not clear that trying to
be smart about this in the model justifies additional complexity.
Tests had to be adjusted where they expected explicit row removal
and insert signals.
Change-Id: I4f7eac1419824361d7d9bdcc6a87092b33e80d7a
Task-Id: QTBUG-25419
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
Follow-up to c55a99965d8c08d5f924d49db4fe4aa49df8096.
3 problems prevented stored procedure output parameters from working.
- SQLBindParameter needs access to buffer provided by QByteArray.
- The length of the buffer is measured in bytes.
- A typo corrupted conversion back to QString.
Also, data() makes more sense than constData() to expose the buffer.
Task-Id: QTBUG-18435
Change-Id: I66444b13c0f584ed79bcf026e5a23caff83c22cb
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The placeholder name must include the : prefix.
Several type tests for aggregate functions assumed sqlite behavior
which is actually exceptional due to sqlite's loose type system.
REAL is a synonymn for DOUBLE in sqlite but is also compatible with
at least MS SQL Server, PostgreSQL, Oracle, and MySQL.
Change-Id: I97f8c55d2e962b072cfab11a121fda685666e754
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Applied Bill King's suggestion in QTBUG-1363. Columns of
hStmt must be accessed in order.
Verified using ODBC driver on SQL Server 2005 on Windows 7.
Added test for length of text field for MS SQL Server over ODBC.
Task-Id: QTBUG-1363
Change-Id: I6673dafe75e3ef394d41e439adb45096c1421068
Reviewed-by: Bill King <bill.king@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
According to documentation, SQLite doesn't have a separate Boolean
storage class. Instead, values are stored as integers 0(false) and
1(true). In QSqlQuery::bindValue(), if a boolean value is bound
to a placeholder, it is converted to text true and false. This fix
converts boolean value to integer 0 and 1.
Task-number: QTBUG-23895
Change-Id: I4945971172f0b5e5819446700390033a1a4ce301
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Postgres async notifications can contain a payload parameter
that is currently discarded. This patch provides the QSqlDriver
api change necessary to deliver a payload with each emitted
notification by adding a QVariant parameter to the notification
signal. It also provides the implementation for the qsqlpsql driver.
The qsql_ibase driver has been updated to reflect the change to the
notification signal signature.
The eventNotificationPSQL test in the qsqldatabase test has
been expanded to test proper payload sending and receiving.
All tests/auto/sql/kernel tests have been run with sqllite and
postgres with no regressions.
Task-number: QTBUG-13500
Change-Id: I9137f6acc8cfca93f45791ca930e0287d93d5d0d
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Tests added that cover boundValues with positional binding,
and boundValueName.
Change-Id: I2962d76607b716d19d3e0be958109be2f032f2d9
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This patch fixes a critical bug in the qsqlpsql driver where
notifications aren't delivered when received. Any blocking libpq
function(specifically PQexec) will read all the incoming data
from the socket, including any pending notifications. This would
cause the socket notifier to never be fired for incoming
notifications that are already queued inside libpq. The qsqldriver
test case was skipping the postgres notification test because of
this bug, now its enabled and passing. In order to fix this
bug I made a wrapper function for PQexec in QPSQLDriverPrivate
that calls _q_handleNotification via QMetaObject::callMethod
QueuedConnection in order to deliver pending notifications
when control returns to the event loop. I also added a flag
to ensure only one call is made each time the event loop is
entered.
Change-Id: I19f5297094ae7ae46bfb0717e4fca744d69f7b92
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
QSqlTableModel::headerData() generates a crash if an invalid filter
is set. QSqlQueryModel::indexInQuery() should check the index value
before applied to d->colOffsets[].
QSqlQueryModel::initRecordAndPrimaryIndex() is updated to sync the
size of rec and colOffsets.
Task-number: QTBUG-23879
Change-Id: Ic9f88bb288592aa6fb3c1415cc818632dadaab56
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Prepared queries should be able to use a name parameter more than
once. Currently this will result in undefined behavior and crashes.
This patch fixes the bug and implements the needed test case.
Task-number: QTBUG-6420
Change-Id: I07d6537e432a9b2781e9ef3d9f597bceb054527e
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
For OnFieldChange and OnRowChange, we don't want more than one row in
the cache with uncommitted changes. This could happen if deletion in
the database fails while other changes are pending.
Chosen solution is to return false if other rows have pending changes.
Also, we only allow 1 row removed at a time.
Updated test, changes and documentation.
Change-Id: I68baf6d221789b4754e891535070011c759a2155
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
The model can never do a good job of knowing when user moves to a
new row in the view. Faking it by detecting when another row
is changed was not a good solution because it cannot detect
when the last edited row is left.
Either the view should automatically submit when the user leaves
a row or the application should provide a way to submit.
This change made it possible to reuse the logic of flags() in
setData().
Change-Id: I2550e5b113bceba1a852fc21203babeca07c5748
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
For OnFieldChange and OnRowChange, inserting rows should not be
allowed if there are pending changes in cache.
Change-Id: Ia794332959a35a1de87e798ba1a74ace3dfae68f
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
For OnFieldChange and OnRowChange, before submitting new changes,
setData() and setRecord() attempt to submit pending changes and
revert them upon failure. However, they fail to consider that
reverting pending insertions removes rows from the model. As a
result, the new change can be applied to a row higher than intended.
One possible solution would be to adjust the targetted index for the
removed rows, so that the intended row is affected by the new change.
But this still causes the strange editing experience as rows jump
up just as they are being edited.
It does not seem right in the first place for the model to initiate
reverting changes. It should be up to the application to decide what
to do when data cannot be committed. In particular, setData() and
setRecord() should not have the side effect of reverting already
pending changes.
The chosen solution is simply to refuse new changes that don't make
sense for the edit strategy. For OnFieldChange, flag() will
indicate read-only when editing is blocked by a pending change.
Since setData() and setRecord() submit data immediately for
OnFieldChange, it no longer makes sense to resubmit changes
automatically before a new change.
For OnRowChange, setData() keeps the behavior of automatically
submitting a pending row before starting on a new row. This is
historical behavior and is probably motivated by the fact that
QTableView does not automatically call submit() when editing leaves a
row. The obvious shortcoming of this is that the last row to be edited
will not be submitted automatically. It also prevents us from flagging
rows other than the pending row as read-only.
For OnRowChange, setRecord(), being row-oriented by nature, should
submit the change immediately rather than waiting for the next call
to setRecord(). This makes setRecord() consistent with insertRecord().
Change-Id: Icb4019d8b7c53a7ee48f8121a7a525e8bc35d523
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
Checks if model has any changes to submit.
Includes new test covering isDirty(index) as well the new
overloaded function.
Task-number: QTBUG-3108
Change-Id: I0ccbda45d5d9f06434cf1e1c037a9efb76d0cc37
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
When an aggregate function is used for a column in a SQL resultset then
it should ensure that the right data type is reported for that column.
This also concerns expressions when the returned column does not map
directly to a table column.
Test included for this.
Task-number: QTBUG-22038
Change-Id: I07487694c0ed393d46af06e232914fe923356a99
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
Calling select refreshes the query data but disrupts view
navigation.
For OnFieldChange and OnRecordChange it makes sense to only
select the row in question. This does not disturb view navigation.
Assume disruption of view navigation is not a problem
for OnManualSubmit because the user or application decides
when submitAll is called.
Task-number: QTBUG-2875
Change-Id: I1e5f68668fb9102f6296d67d543e80daa403f1c4
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
Once an insert has been submitted, the cached record behaves like an
update. For row bookkeeping, we still have to remember that it was
originally inserted and is not in the query rows.
Between submitting a delete and selecting, we remove the values
from the deleted record. This causes a blank row to be displayed.
Read-only flag is set for cells in deleted row.
Reverting between submit and select means going back to the last
submitted values.
When removing rows, it's better to process from highest row numbers
to lowest. This avoids complications with higher rows shifting down
when lower rows are removed.
Change-Id: I8752fa11f7a1b88f2a71b9e03a020ac37e62487f
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
The purpose of the hack was to fool QSqlQueryModel into signaling the
removal of extra rows via rowsRemoved(). The extra rows are the
inserted rows generated by QSqlTableModel.
While it is important to signal the removal of all the rows before
requerying after committing changes, there is a cleaner way. The
table model should remove its rows before the query model removes its
rows.
Iterating backwards avoids having to decrement row numbers above ones
being removed.
Expected test results have been adjusted for these changes.
Change-Id: I0e8aa81f5e7b8fea5922f5ffd1cfb4a932313a10
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
Fix up for f5e1da12f0.
Change-Id: I3a730ce7e47d71551a46cc105ba2d1fe4e33b65b
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
Previously, if any fields in the supplied record could not be matched
with a column in the target table, dataChanged() was supressed for all
columns for OnManualSubmit. This is not good because it prevents other
views from noticing the fields that *do* change.
It's simplest and probably more efficient just to emit
dataChanged() once for the whole row. Fewer signals need to be
processed and in typical cases much or all of the row is likely to
be changed anyway.
Change-Id: Ib56bf9a18e51b9cb85771acefcb2bf26e295a54e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
In an apparent attempt to be economical with emitting dataChanged()
and submitting SQL to the databse, setRecord() compares each field
value of the record with the old value, taking action only when
a difference is detected. Several complaints against this code are:
-The comparision does not work on float type.
-It is really up to the application and database to decide this. The
model should make few assumptions. The application has the option to
omit fields from the record that should be ignored.
-The current behavior seems to assume that the "old" values are the
current state of the database, but the database may have changed since
the model was last refreshed.
-The code compares the value from record(), which probably
corresponds to the EditRole, with the DisplayRole value from data().
Change-Id: I11477c185eb411d442144dc682893d0df12d03d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Qt 5 seems like a welcome opportunity to stop emitting this
spurious beforeDelete signal.
Change-Id: Ib8628343ca9b8fdd85c154a206c7e2bf2c4c9dc1
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
The 'real' datatype should be seen as a QVariant::Double type and not as
a QVariant::String type otherwise it does not get presented correctly
when using a non Qt application to access it.
Test is included for QSqlQuery.
Task-number: QTBUG-16373
Change-Id: Ie323ce49eb95e4d6bb4c3814ba9a957a63f4b259
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
(cherry picked from commit b23631015c23a49e3b4d296ea0a6266bfce3d4f1)
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Even though it is stated in the documentation that the SQL driver must
remain valid during the life time of QSqlQuery, there are users who don't
follow the rule. It's common that the destructor of QSqlQuery is called
after the driver is already deleted. This fix checks the validity of
the SQLite driver before QSqliteResult uses it in destructor.
Task-number: QTBUG-16967
Change-Id: If0f52113f12e14102da1671cd6e12bdaa267114f
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
In tst_qsql, there are function calls to QApplication(argc, 0, false), where
argc is zero. According to the documentation, argc must be greater than
zero and argv must contain at least one valid character string. The
misuse of this API has no problem on any platform other than Mac OS. This
commit has fixed the crash by passing valid dummy parameters.
Task-number: QTBUG-22811
Change-Id: I42b26d66f0becb7a942896e6ddcaea52ff720a48
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QSqlRelationalTableModel doesn't follow relations on the first column
of a table. The DisplayRole and the EditRole for indexes on column 0
are always the same. The bug is found in QSqlRelationalTableModel::data.
Task-number: QTBUG-20038
Change-Id: Ie1e98b5f46ffc171113f2d51b9b19ff5febb1c3c
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
If an ongoing query is not finalized before close function is
called, sqlite driver still tries to close the connection to
sqlite. In this case, sqlite reports an error to sqlite driver
which is not reported to the client. The failure in close causes
connection to sqlite unclosed and memory is not freed. This
fix tries to finalize all queries before close function is called.
The close function should succeed.
Task-number: QTBUG-16967
Change-Id: I2f10a2a9017446a9d44b693b00464a89625e3602
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
SQLite driver support only one statement at a time. This fix makes the
exec and prepare call failed if more than one statements are given.
This is bug fix for QTBUG-21884. Also the behaviour is documented in
the API specification.
Task-number: QTBUG-21884
Change-Id: If1e25a0dd9f9ee38961ef478fc7909f6b05e360a
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
The QSql test currently crashes, which can destabilize the CI system
when attempting to re-enable the autotest. Skip this test for now by
disabling the check target for it.
Change-Id: I598f8ca7bce6b6f46daf6a053da5571b62486463
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Fix QtSQL aoto test server addresses. New servers are located in
Brisbane. Old Oslo test servers shall not be used anymore.
Change-Id: Icd4ae4c0193f71410d572bfa014272e1e77586c0
Reviewed-by: Trust Me
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I02fe27b2c1800f929250fa8694ca2976c9661a12
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Moving benchmark test from 'tests/auto' to 'tests/benchmarks'.
Also removing 'qttest_p4' usage while we are at it.
- void benchmark();
was moved to 'tests/benchmarks/sql/kernel/qsqlquery'
Task-number: QTQAINFRA-353
Change-Id: I241bb1a2fba1c1b5524c21e5941a6c5daf5a4a89
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Now, users of QBasicAtomicInt and QBasicAtomicPointer must be sure to
use .load() and .store() to access the values.
Change-Id: I6b48ed175618baf387dd38d821bd50e6e93c082e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The DEPENDS_ON macro didn't do anything and has misled many users to
think that they can write test functions that depend on other test
functions.
Task-number: QTBUG-21851
Change-Id: Ibe65b2d5d88bb81b6a0ebbe0b220f7d409a1446c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed warnings just repeat information that is already in the
QSKIP's that immediately follow the warnings.
Change-Id: Id13158487e8075aab8a8f48955303edde3f4af63
Reviewed-on: http://codereview.qt-project.org/6194
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP already causes the test function that calls it to return, so the
returns removed by this commit were unreachable.
Change-Id: I1fa2f3a3271927d8a600b02d8b31bd81db9146b1
Reviewed-on: http://codereview.qt-project.org/6188
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is in preparation of removing testlib's
dependency on QtGui and QtWidgets.
Autotests that need QtWidgets api must
explicitly include it (since the types are no
longer provided by the QtGui master header).
Autotests that don't need QtGui or QtWidgets
api shouldn't link against those libraries.
Change-Id: I2808289068514fcac582808828ad4634e2631733
Reviewed-on: http://codereview.qt-project.org/5093
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
